Get Instrument cluster -> Multi-information display Guide for Toyota 4 Runner SUV Fifth Generation (2010-2024)

90

2. Instrument cluster

Multi-information display

Summary of functions

The multi-information display presents the driver with a variety of driv-

ing related data, such as the current outside temperature. The multi-

information display can also be used to change the display settings

and other settings.

Shift position and shift range (P. 205)

Menu icon display area

1

2

Displays the following items.

When a menu icon is not selected, the outside temperature is displayed.

• Menu icons (P. 92)

• Outside temperature (P. 98)

Content display area

3

A variety of information can be displayed by selecting a menu icon. Addi-

tionally, warning or pop-up display will be displayed in some situations.

• Menu icon content (P. 92)

• Warning message (P. 488)

Odometer and trip meter (P. 88)

Indicators (P. 82)

4

5

6

Meter control switches (P. 91)

4RUNNER (U)

91

2. Instrument cluster

Operating the meter control switches

The multi-information display is operated using the meter control

switches.

Scroll screens*, change the

displayed content* and move

the cursor

1

2

Press: Enter/Set

Press and hold:

Reset/Display the next screen

2

Press: Displays the screen reg-

istered as the top screen

3

When no screen has been regis-

tered, the drive information screen

will be displayed.

Press and hold: Registers the

currently displayed screen as

the top screen

When the confirmation screen is displayed, select yes to register the

screen. If the selected screen cannot be registered, a registration failure

message will be shown.

Return to the previous screen

Call sending/receiving display

4

5

Linked with the hands-free system, sending or receiving call is displayed.

For details regarding the hands-free system, refer to the “Navigation sys-

tem owner's manual”.

*: When the screen can be scrolled or different content can be displayed, a

mark, such as an arrow, will be displayed to suggest which switch to oper-

ate.

4RUNNER (U)

92

2. Instrument cluster

Menu icons

Drive information

Select to display various drive data. (P. 93)

Vehicle information display

Select to display the vehicle information. (P. 95)

Navigation system-linked display (if equipped)

Select to display the following navigation system-linked information.

• Route guidance

• Compass display (north-up display/heading-up display)

Audio system-linked display (if equipped)

Select to enable selection of an audio source or track on the display

using the meter control switches.

Driving assist system information

Select to display the operational status of the following systems:

• Dynamic radar cruise control (P. 257)

• LDA (Lane Departure Alert) (P. 249)

Warning message display

Select to display warning messages and measures to be taken if a

malfunction is detected. (P. 488)

• When there are no current warning messages, “No Messages” is

displayed.

• When there are multiple warning messages,

used to switch the displayed warning message.

or

can be

Settings display

Select to change the meter display settings and the operation set-

tings of some vehicle functions. (P. 95)

4RUNNER (U)

93

2. Instrument cluster

Drive information

Items displayed can be switched by pressing

or

up and down.

■ After Start

Average fuel economy*

Displays the average fuel con-

sumption since the engine was

started.

1

2

3

Average vehicle speed

2

Displays the average vehicle

speed since the engine was

started.

Elapsed time

Displays the elapsed time since the engine was started.

*: Use the displayed average fuel economy as a reference.

■ After Reset

Current fuel economy

1

Displays the current rate of fuel

consumption.

Average fuel economy*^1,2

2

Displays the average fuel con-

sumption since the function was

reset.

Average speed*²

Displays the average vehicle

speed since the function was

reset.

3

4

Elapsed time*²

Displays the elapsed time since the function was reset.

*¹: Use the displayed average fuel economy as a reference.

*²: Pressing and holding

will reset.

4RUNNER (U)

94

2. Instrument cluster

■ After Refuel

Range*^1,2

1

Displays the driving range with

remaining fuel.

Average fuel economy*^2,3

2

Displays the average fuel con-

sumption since the vehicle was

refueled.

*¹: This distance is computed

based on your average fuel con-

sumption. As a result, the actual

distance that can be driven may

differ from that displayed.

*²: When only a small amount of fuel is added to the tank, the display may

not be updated. When refueling, turn the engine switch off. If the vehicle

is refueled without turning the engine switch off, the display may not be

updated.

*³: Use the displayed average fuel economy as a reference.

■ Eco Indicator (Eco Driving Indicator Zone Display)

P. 98

■ Speed

Displays the vehicle speed.

■ Vehicle sway warning

Detects the sway of the vehicle within a lane, which is often associ-

ated with a decrease in the driver’s attention level, and displays the

decrease in attention using a bar display.

The shorter the bar length, the more the driver may need to rest.

This display is a part of the LDA (Lane Departure Alert) system. The dis-

play is enabled when the operating conditions of the vehicle sway warn-

ing function are met. (P. 249)

■ Blank screen (display off)

Drive information is not displayed.

4RUNNER (U)

95

2. Instrument cluster

Vehicle information

Items displayed can be switched by pressing

■ Steering angle

or

up and down.

Displays the direction of the front tires.

The tire direction is displayed in 3 stages for both left and right, in accor-

dance with the angle of the tire.

If a battery terminal is disconnected and reconnected, the display may

be disabled temporarily. After driving the vehicle for a while, the display

will be enabled.

2

■ Tire inflation pressure

Displays inflation pressure of each tire.

The inflation pressure of the spare tire will be displayed. (if equipped)

Settings display

The settings of some features can be changed by using the meter

control switches.

■ Setting procedure

1

On the setting screen, choose the desired item using

and then press

or

,

.

• For functions that can be enabled or disabled, the function switches

between on and off each time is pressed.

• For functions that allow to select operation contents, display con-

tents, etc., the setting screen is displayed.

2

Select the desired setting by operating

press

or

, and then

.

To stop the selection, press

to return to the previous screen.

4RUNNER (U)

96

2. Instrument cluster

■ Setting items

●

LDA (Lane Departure Alert)

Select to set up LDA. (P. 560)

• Alert sensitivity

• Sway warning

• Sway sensitivity

●

BSM (Blind Spot Monitor)

Select to activate/deactivate BSM. (P. 558)

• BSM on/off

• BSM sensitivity

• Outside rear view mirror indicator brightness

RCTA (Rear Cross Traffic Alert)

●

Select to activate/deactivate RCTA. (P. 558)

• RCTA on/off

PCS (Pre-Collision System)

Select to set the following items. (P. 242)

• PCS on/off

• PCS sensitivity

●

Intuitive parking assist (if equipped)

Select to set the Intuitive parking assist on/off

● Vehicle settings

“TPWS” (Tire Pressure Warning System) (P. 430)

• “Set Pressure”

Select to initialize the tire pressure warning system.

• “Change Wheel Set”

Select to register the ID codes of the tire pressure sensors to

the tire pressure warning system.3

4RUNNER (U)

97

2. Instrument cluster

● Meter settings (P. 559)

Select to set the following items.

• Language

Select to change the language on the display.

• Units

Select to change the unit for measure.

Eco Driving Indicator Light

•

Select to activate/deactivate the Eco Driving Indicator Light.

(P. 98)

2

•

switch settings

You can register 1 screen as the top screen. To register, press

and hold while the desired screen is displayed.

• Pop-up display

Select to set the pop-up displays (P. 99), which may appear

in some situations, on/off.

• Initialization

Select to reset the meter display settings.

4RUNNER (U)

98

Other contents

2. Instrument cluster

■ Multi-terrain Select display* (if equipped)

P. 315

■ Crawl Control display* (if equipped)

P. 312

■ Outside temperature display

Displays the outside temperature

The temperature range that can be displayed is from -40 °F (-40 °C) to

122 °F (50 °C).

When the outside temperature drops below 37 °F (3 °C),

flash approximately 10 seconds, then stay on.

will

■ Customization

Settings (e.g. available language) can be changed.

(Customizable features: P. 549)

*: Automatically displayed when the system is used

■Eco Driving Indicator

1

2

Eco Driving Indicator Light

Eco Driving Indicator Zone Display

Suggests the Zone of Eco driving with

current Eco driving ratio based on

acceleration.

3

4

Eco driving ratio based on acceleration

If the acceleration exceeds Zone of Eco

driving, the right side of Eco Driving

Indicator Zone Display will illuminate.

Zone of Eco driving

Eco Driving Indicator will not operate

under the following conditions:

• The shift lever is in any position other

than D.

• The vehicle speed is approximately

80 mph (130 km/h) or higher.

• The Crawl Control is operating. (if

equipped) (P. 312)

4RUNNER (U)

99

2. Instrument cluster

■Pop-Up display

The pop-up display is displayed on the multi-information display according to

the operating conditions of the following functions:

●Route guidance display of the navigation system-linked system (if equipped)

●Incoming call display of the hands-free phone system

The pop-up display function can be disabled.

■Tire inflation pressure

●It may take a few minutes to display the tire inflation pressure after the

engine switch is turned to IGNITION ON mode. It may also take a few min-

utes to display the tire inflation pressure after inflation pressure has been

adjusted.

2

●“---” may be displayed if the tire information cannot be determined due to

unfavorable radio wave conditions.

●Tire inflation pressure changes with temperature. The displayed values may

also be different from the values measured using a tire pressure gauge.

■Outside temperature display

In the following situations, the correct outside temperature may not be dis-

played, or the display may take longer than normal to change:

●When the vehicle is stopped, or moving at low speeds (less than 12 mph [20

km/h])

●When the outside temperature has changed suddenly (at the entrance/exit

of a garage, tunnel, etc.)

●When “--” or “E” is displayed, the system may be malfunctioning. Take your

vehicle to Toyota dealer.

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

4RUNNER (U)

100

2. Instrument cluster

WARNING

■Caution for use while driving

For safety, avoid operating the meter control switches while driving as much

as possible, and do not look continuously at the multi-information display

while driving. Stop the vehicle and operate the meter control switches. Fail-

ure to do so may cause a steering wheel operation error, resulting in an

unexpected accident.

■Cautions while setting up the display

As the engine needs to be running during setting up the display, ensure that

the vehicle is parked in a place with adequate ventilation. In a closed area

such as a garage, exhaust gases including harmful carbon monoxide (CO)

may collect and enter the vehicle. This may lead to death or a serious

health hazard.

■The multi-information display at low temperatures

Allow the interior of the vehicle to warm up before using the multi-informa-

tion display. At extremely low temperatures, the multi-information display

monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or serious injury.

NOTICE

■While setting up the display

To prevent battery discharge, ensure that the engine is running while setting

up the display features.

4RUNNER (U)

Instrument cluster -> Multi-information display for Your Toyota 4 Runner SUV Fifth Generation (2010-2024)

Related Topics

Instrument cluster

Popular Owner Manuals

Latest Owner Manuals