Before driving -> Opening, closing the windows and moon roof for Your Toyota 4 Runner SUV Sixth Generation (2025-2026)

177  
3-5. Opening, closing the windows and moon roof  
3-5.Opening, closing the windows and moon roof  
dow frame while the window is clos-  
ing, window movement is stopped  
and the window is opened slightly.  
Pow er w indow s  
Catch protection function  
Opening and closing the  
power windows  
If an object becomes caught  
between the door and window while  
the window is opening, window  
movement is stopped.  
The power windows can be  
opened and closed using the  
switches.  
When the side window cannot  
be opened or closed  
Operating the switch moves the  
windows as follows:  
When the jam protection function or  
catch protection function operates  
unusually and the side window can-  
not be opened and closed, perform  
the following operations with the  
power window switch of that door.  
3
Stop the vehicle. With the engine  
switch in ON, within 4 seconds of  
the jam protection function or  
catch protection function activat-  
ing, continuously operate the  
power window switch in the one-  
touch closing direction or one-  
touch opening direction so that the  
side window can be opened and  
closed.  
1 Closing  
2 One-touch closing*  
3 Opening  
If the side window cannot be  
opened and closed even when  
performing the above operations,  
perform the following procedure  
for function initialization.  
4 One-touch opening*  
*
: To stop the window partway,  
operate the switch in the opposite  
direction.  
1 Turn the engine switch to ON.  
2 Pull and hold the power window  
switch in the one-touch closing  
direction and completely close  
the side window.  
3 Release the power window  
switch for a moment, resume  
pulling the switch in the one-  
touch closing direction, and hold  
it there for approximately 6 sec-  
onds or more.  
The power windows can be  
operated when  
The engine switch is in ON  
Operating the power windows  
after turning the engine off  
The power windows can be oper-  
ated for approximately 45 seconds  
even after the engine switch is  
turned to ACC or turned off. They  
cannot, however, be operated once  
either front door is opened.  
4 Press and hold the power win-  
dow switch in the one-touch  
opening direction. After the side  
window is completely opened,  
continue holding the switch for  
an additional 1 second or more.  
Jam protection function  
5 Release the power window  
switch for a moment, resume  
If an object becomes jammed  
between the window and the win-  
178  
3-5. Opening, closing the windows and moon roof  
pushing the switch in the one-  
touch opening direction, and  
hold it there for approximately 4  
seconds or more.  
WARNING  
Observe the following precau-  
tions.  
Failing to do so may result in  
death or serious injury.  
6 Pull and hold the power window  
switch in the one-touch closing  
direction again. After the side  
window is completely closed,  
continue holding the switch for a  
further 1 second or more.  
Closing the windows  
The driver is responsible for all  
the power window operations,  
including the operation for the  
passengers. In order to prevent  
accidental operation, especially  
by a child, do not let a child  
operate the power windows. It is  
possible for children and other  
passengers to have body parts  
caught in the power window.  
Also, when riding with a child, it  
is recommended to use the win-  
dow lock switch. (P.179)  
If you release the switch while the  
window is moving, start again from  
the beginning.  
If the window reverses and cannot  
be fully closed or opened, have the  
vehicle inspected by your Toyota  
dealer.  
Door lock linked window opera-  
tion  
The power windows can be  
opened and closed using the  
Check to make sure that all pas-  
sengers do not have any part of  
their body in a position where it  
could be caught when a window  
is being operated.  
*
mechanical key. (P.606)  
The power windows can be  
opened using the wireless remote  
*
control. (P.119)  
The alarm may be triggered if the  
alarm is set and a power window  
is closed using the door lock  
linked power window operation  
function. (P.71)  
*
: These settings must be custom-  
ized at your Toyota dealer.  
Power windows open warning  
buzzer  
When using the wireless remote  
control or mechanical key and  
operating the power windows,  
operate the power window after  
checking to make sure that  
there is no possibility of any  
passenger having any of their  
body parts caught in the win-  
dow. Also, do not let a child  
operate window by the wireless  
remote control or mechanical  
key. It is possible for children  
and other passengers to get  
caught in the power window.  
A buzzer sounds and a message is  
shown on the multi-information dis-  
play in the instrument cluster when  
the engine switch is turned off and  
the driver’s door is opened with the  
power windows open.  
Customization  
Some functions can be customized.  
(P.637)  
179  
3-5. Opening, closing the windows and moon roof  
The passenger windows can still be  
opened and closed using the  
driver’s switch even if the lock  
switch is on.  
WARNING  
When exiting the vehicle, turn  
the engine switch off, carry the  
key and exit the vehicle along  
with the child. There may be  
accidental operation, due to  
mischief, etc., that may possibly  
lead to an accident.  
Jam protection function  
Never use any part of your body  
to intentionally activate the jam  
protection function.  
The jam protection function may  
not work if something gets  
jammed just before the window  
is fully closed. Be careful not to  
get any part of your body  
3
The window lock switch can be  
operated when  
The engine switch is in ON.  
jammed in the window.  
When the battery is discon-  
nected  
Catch protection function  
Never use any part of your body  
or clothing to intentionally acti-  
vate the catch protection func-  
tion.  
The window lock switch is disabled.  
If necessary, press the window lock  
switch after reconnecting the bat-  
tery.  
The catch protection function  
may not work if something gets  
caught just before the window is  
fully opened. Be careful not to  
get any part of your body or  
clothing caught in the window.  
Preventing accidental  
operation (window lock  
switch)  
This function can be used to  
prevent children from acciden-  
tally opening or closing a pas-  
senger window.  
Press the switch.  
The indicator  
will come on and  
the passenger windows will be  
locked.  
180  
3-5. Opening, closing the windows and moon roof  
2 Closing (push and hold)  
Power back window  
This operation can only be per-  
formed when the electronic key  
is within the detection range.  
The power back window can  
be opened and closed using  
the switch or key.  
The power back window can be  
operated from inside the vehi-  
cle when  
WARNING  
Caution while driving  
The engine switch is in ON.  
Keep the back window closed.  
The power back window can be  
opened when the rear window  
wiper is working, but the wiper  
stops working until the window is  
closed again. If the power back  
window is not fully closed, the rear  
window wiper, washer, and defog-  
ger will not work.  
This not only keeps personal  
belongings from being thrown out,  
but also prevents exhaust gases  
from entering the vehicle.  
Opening and closing pro-  
cedures  
If the back door is not fully closed,  
the power back window cannot be  
opened using the switch located in  
the cabin. (It is still possible to  
close the window.)  
From inside the vehicle  
If the back door is opened while  
the power back window is opening  
or closing, window operation will  
stop.  
The power back window can be  
operated from outside the vehi-  
cle when  
The engine switch is off.  
The back door is closed.  
1 Opening (push and hold)  
2 Closing (pull and hold)  
Operating the power back win-  
dow from inside the vehicle  
after turning the engine off  
From outside the vehicle  
The power back window can be  
operated for approximately 45 sec-  
onds even after the engine switch is  
turned to ACC or turned off. It can-  
not, however, be operated once  
either front door is opened.  
Jam protection function  
If an object becomes caught  
between the window and the win-  
dow frame, window travel is stopped  
and the window is opened slightly.  
1 Opening (push and hold)  
181  
3-5. Opening, closing the windows and moon roof  
When the power back window  
does not close normally  
Power back window open warn-  
ing buzzer  
If the jam protection function is oper- A buzzer sounds and a message is  
ating abnormally and a window can- shown on the multi-information dis-  
not be closed, perform the following  
operations using the power back  
window switch.  
play in the instrument cluster when  
the engine switch is turned off and  
the driver’s door is opened with the  
power back window open.  
After stopping the vehicle, the win-  
dow can be closed by holding the  
power back window switch in the  
one-touch closing position while  
the engine switch is turned to  
IGNITION ON.  
WARNING  
Observe the following precau-  
tions.  
Failure to do so may result in  
death or serious injury.  
If the window still cannot be  
closed even by carrying out the  
operation explained above, initial-  
ize the function by performing the  
following procedure.  
1 Hold the power back window  
switch in the one-touch closing  
position. Continue holding the  
switch for a further 6 seconds  
after the window has closed.  
2 Hold the power back window  
switch in the one-touch opening  
position. Continue holding the  
switch for a further 2 seconds  
after the window has opened  
completely.  
3 Hold the power back window  
switch in the one-touch closing  
position once again. Continue  
holding the switch for a further 2  
seconds after the window has  
closed.  
Caution while driving  
3
Keep the back door and back win-  
dow closed while driving. If the  
back door or the back window is  
left open, the back door may hit  
nearby objects while driving or  
luggage may be unexpectedly  
thrown out, causing an accident.  
In addition, exhaust gases may  
enter the vehicle, causing death  
or a serious health hazard. Make  
sure to close the back door and  
back window before driving.  
Closing the back window  
The driver is responsible for all  
the power back window opera-  
tions, including the operation for  
the passengers. In order to pre-  
vent accidental operation, espe-  
cially by a child, do not let a  
child operate the power back  
window. It is possible for chil-  
dren and other passengers to  
have body parts caught in the  
power back window.  
If you release the switch while the  
window is moving, start again from  
the beginning.  
If the window continues to close but  
then re-open slightly even after per-  
forming the above procedure cor-  
rectly, have the vehicle inspected by  
your Toyota dealer.  
Check to make sure that all pas-  
sengers do not have any part of  
their body in a position where it  
could be caught when a window  
is being operated.  
Customization  
Some functions can be customized.  
(P.644)  
182  
3-5. Opening, closing the windows and moon roof  
*
Moon roof  
WARNING  
When using the key and operat-  
ing the power back window,  
operate the power back window  
after checking to make sure that  
there is no possibility of any  
passenger having any of their  
body parts caught in the power  
back window. Also, do not let a  
child operate power back win-  
dow by the key. It is possible for  
children and other passengers  
to get caught in the power back  
window.  
*
: If equipped  
Use the overhead switches  
to open and close the moon  
roof and tilt it up and down.  
Operating the moon roof  
Opening and closing  
When exiting the vehicle, turn  
the engine switch off, carry the  
key and exit the vehicle along  
with the child. There may be  
accidental operation, due to  
mischief, etc., that may possibly  
lead to an accident.  
Jam protection function  
Never use any part of your body  
to intentionally activate the jam  
protection function.  
1 Opens the moon roof*  
The moon roof tilts up and then  
opens.  
The jam protection function may  
not work if something gets  
caught just before the window  
fully closes.  
The moon roof stops slightly before  
the fully open position to reduce  
wind noise. Press the switch again  
to fully open the moon roof.  
2 Closes the moon roof*  
*
: Lightly press either side of the  
moon roof switch to stop the  
moon roof partway.  
Tilting up and down  
183  
3-5. Opening, closing the windows and moon roof  
1 Tilts the moon roof up*  
When the moon roof does not  
close normally  
2 Tilts the moon roof down*  
Perform the following procedure:  
*
If the moon roof closes but then  
re-opens slightly  
: Lightly press either side of the  
moon roof switch to stop the  
moon roof partway.  
1 Stop the vehicle.  
2 Press and hold the “CLOSE”  
*1  
switch.  
The moon roof can be operated  
when  
The moon roof will close, reopen  
and pause for approximately 10 sec-  
*2  
The engine switch is in ON.  
onds. Then it will close again, tilt  
Operating the moon roof after  
turning the engine off  
up and pause for approximately 1  
second. Finally, it will tilt down, open  
and close.  
3 Check to make sure that the  
moon roof is completely closed  
and then release the switch.  
The moon roof can be operated for  
approximately 45 seconds after the  
engine switch is turned to ACC or  
OFF. It cannot, however, be oper-  
ated once either front door is  
opened.  
3
If the moon roof tilts down but then  
tilts back up  
1 Stop the vehicle.  
Jam protection function  
*1  
If an object is detected between the  
moon roof and the frame while the  
moon roof is closing or tilting down,  
travel is stopped and the moon roof  
opens slightly.  
2 Press and hold the “UP” switch  
until the moon roof moves into  
the tilt up position and stops.  
3 Release the “UP” switch once  
and then press and hold the “UP”  
*1  
Sunshade  
switch again.  
The sunshade can be opened and  
closed manually. However, the sun-  
shade will open automatically when  
the moon roof is opened.  
The moon roof will pause for  
approximately 10 seconds in the tilt  
*2  
up position. Then it will adjust  
slightly and pause for approximately  
1 second. Finally, it will tilt down,  
open and close.  
Door lock linked moon roof  
operation  
4 Check to make sure that the  
moon roof is completely closed  
and then release the switch.  
The moon roof can be opened  
and closed using the mechanical  
*
key. (P.606)  
The moon roof can be opened  
*1  
:If the switch is released at the  
incorrect time, the procedure will  
have to be performed again from  
the beginning.  
*
using the wireless remote control.  
(P.116)  
The alarm may be triggered if the  
alarm is set and the moon roof is  
closed using the door lock linked  
moon roof operation function.  
(P.71)  
*2  
:If the switch is released after the  
above mentioned 10 seconds  
pause, automatic operation will  
be disabled. In that case, press  
and hold the “CLOSE” or “UP”  
switch, and the moon roof will tilt  
up and pause for approximately 1  
*
: These settings must be custom-  
ized at your Toyota dealer.  
184  
3-5. Opening, closing the windows and moon roof  
second. Then it will tilt down,  
open and close. Check to make  
sure that the moon roof is com-  
pletely closed and then release  
the switch.  
Check to make sure that all pas-  
sengers do not have any part of  
their body in a position where it  
could be caught when the moon  
roof is being operated.  
If the moon roof does not fully close  
even after performing the above  
procedure correctly, have the vehi-  
cle inspected by your Toyota dealer.  
Moon roof open reminder func-  
tion  
The buzzer sounds and a message  
is shown on the multi-information  
display when the engine switch is  
turned to OFF and the driver’s door  
is opened with the moon roof open.  
Customization  
Some functions can be customized.  
(P.637)  
When using the wireless remote  
control or mechanical key and  
operating the moon roof, oper-  
ate the moon roof after checking  
to make sure that there is no  
possibility of any passenger  
having any of their body parts  
caught in the moon roof. Also,  
do not let a child operate moon  
roof by the wireless remote con-  
trol or mechanical key. It is pos-  
sible for children and other  
passengers to get caught in the  
moon roof.  
WARNING  
Observe the following precau-  
tions.  
Failure to do so may cause death  
or serious injury.  
Opening the moon roof  
Do not allow any passengers to  
put their hands or head outside  
the vehicle while it is moving.  
Do not sit on top of the moon  
roof.  
WARNING  
Opening and closing the  
moon roof  
When exiting the vehicle, turn  
the engine switch off, carry the  
key and exit the vehicle along  
with the child. There may be  
accidental operation, due to  
mischief, etc., that may possibly  
lead to an accident.  
The driver is responsible for  
moon roof opening and closing  
operations.  
In order to prevent accidental  
operation, especially by a child,  
do not let a child operate the  
moon roof. It is possible for chil-  
dren and other passengers to  
have body parts caught in the  
moon roof.  
Jam protection function  
Never use any part of your body  
to intentionally activate the jam  
protection function.  
185  
3-5. Opening, closing the windows and moon roof  
The jam protection function may  
not work if something gets  
caught just before the moon  
roof is fully closed. Also, the jam  
protection function is not  
designed to operate while the  
switch is being pressed. Take  
care so that your fingers, etc. do  
not get caught.  
3