Get Vehicle status information and indicators Guide for Toyota 4 Runner SUV Sixth Generation (2025-2026)

73

Vehicle status informa-

tion and indicators

2

2-1. Instrument cluster

Warning lights and indica-

tors ...............................74

Gauges and meters (7-inch

display).........................81

2

Gauges and meters (12.3-

inch display) .................85

Multi-information display (7-

inch display) .................91

Multi-information display

(12.3-inch display)..... 100

Fuel consumption informa-

tion ............................ 110

74

2-1. Instrument cluster

2-1.Instrument cluster

Warning lights and indicators

The warning lights and indicators on the instrument cluster,

overhead console and outside rear view mirrors inform the

driver of the status of the vehicle’s various systems.

Instrument cluster

For the purpose of explanation, the following illustrations display all

warning lights and indicators illuminated.

■ Vehicles with 7-inch display

The units used on the meters and some indicators may differ depending on

the target region.

75

2-1. Instrument cluster

■ Vehicles with 12.3-inch display

The meter type can be changed on “

Settings” of the multi-infor-

mation display. (P.108)

 Type 1

2

The units used on the meters and some indicators may differ

depending on the target region.

 Type 2

The units used on the meters and some indicators may differ

depending on the target region.

76

2-1. Instrument cluster

 Type 3

The units used on the meters and some indicators may differ

depending on the target region.

Low engine oil pres-

*2

Warning lights

sure warning light

(P.577)

Warning lights inform the driver

of malfunctions in the indicated

vehicle’s systems.

Malfunction indicator

*1

lamp (P.577)

(U.S.A.)

Brake system warn-

*1

Malfunction indicator

*1

ing light (P.576)

(U.S.A.)

lamp (P.577)

(Canada)

*1

SRS warning light

(P.577)

Brake system warn-

*1

ing light (P.576)

(Canada)

(Red)

*1

ABS warning light

(P.578)

Brake system warn-

*1

(U.S.A.)

(Canada)

(Red)

ing light (P.576)

(Yellow)

*1

ABS warning light

(P.578)

High coolant tempera-

*2

ture warning light

(P.576)

Charging system

*2

Electric power steer-

ing system warning

*1

warning light

(P.577)

light (P.578)

Electric power steer-

ing system warning

*1

light (P.578)

(Yellow)

77

2-1. Instrument cluster

*1

PCS warning light

(P.578)

Parking brake indica-

tor (P.581)

(Canada)

(Flashes)

LDA indicator

(P.578)

Center differential lock

indicator (if equipped)

(P.581)

(Yellow)

LTA indicator

(P.579)

(Flashes)

(Yellow)

Rear differential lock

indicator (if equipped)

(P.582)

Driving assist informa-

*1

2

tion indicator

(P.579)

High speed four-wheel

drive indicator (if

equipped) (P.582)

PDA indicator

(P.579)

Low speed four-wheel

drive indicator (if

equipped) (P.582)

(Yellow)

(Flashes)

Dynamic radar cruise

control indicator

(P.579)

(Flashes)

Tire pressure warning

*1

light (P.582)

Cruise control indica-

tor (P.580)

Low fuel level warn-

ing light (P.583)

Stop & Start cancel

*1

Driver’s and front pas-

senger’s seat belt

reminder light

indicator (if

equipped) (P.580)

Intuitive parking assist

*1

(P.583)

Rear passengers’seat

belt reminder lights

(P.583)

Trailer brake warning

light (if equipped)

(P.584)

OFF indicator (if

equipped) (P.580)

*1

Slip indicator light

(P.580)

Inappropriate pedal

operation warning

*2

*1

:These lights come on when the

engine switch is turned to ON to

indicate that a system check is

being performed. They will turn

off after the engine is started, or

after a few seconds. There may

be a malfunction in a system if

the lights do not come on, or turn

off. Have the vehicle inspected

by your Toyota dealer.

light (P.581)

Brake hold operated

*1

indicator (P.581)

(Flashes)

Parking brake indica-

tor (P.581)

(U.S.A.)

(Flashes)

*2

:This light illuminates on the

multi-information display with a

78

2-1. Instrument cluster

message.

Indicators

WARNING

The indicators inform the driver

of the operating state of the

vehicle’s various systems.

■If a safety system warning

light does not come on

Should a safety system light such

as the ABS and SRS warning light

not come on when you start the

engine, this could mean that

these systems are not available to

help protect you in an accident,

which could result in death or seri-

ous injury. Have the vehicle

Turn signal indicator

(P.226)

Headlight indicator

(P.234)

(U.S.A.)

inspected by your Toyota dealer

immediately if this occurs.

Tail light indicator

(P.234)

(Canada)

Headlight high beam indi-

cator (P.236)

AHB indicator (P.238)

Front fog light indicator

(P.237)

*1, 2

PCS warning light

(P.259)

Dynamic radar cruise

control indicator

(P.290)

*3

( )

Cruise control indicator

(P.301)

*3

( )

LDA indicator (P.270,

275)

*3

( )

*1

LDA OFF indicator

(P.279)

LTA indicator (P.270)

*3

( )

Driving assist information

*1, 2

indicator

(P.316,

330, 339)

79

2-1. Instrument cluster

“ECO” mode indicator

(P.412)

PDA indicator (P.281)

*3

( )

“SPORT” mode indicator

(if equipped) (P.412)

Intuitive parking assist

*4

detection indicator (if

“SPORT S” mode indica-

tor (if equipped) (P.412)

equipped) (P.323)

Intuitive parking assist

*1, 2

“SPORT S+” mode indi-

cator (if equipped)

(P.412)

OFF indicator

(if

equipped) (P.323)

2

“COMFORT” mode indi-

cator (if equipped)

(P.412)

*2

Slip indicator light

(P.432)

(Flashes)

*1, 2

“CUSTOM” mode indica-

VSC OFF indicator

tor (if equipped) (P.412)

Downhill assist control

*2

(P.432)

Smart key system indica-

*5

system indicator (if

equipped) (P.428)

tor (P.432)

Outside rear view mirror

*6

High speed four-wheel

drive indicator (if

indicators (P.316,

330)

equipped) (P.414)

*3

*1

( )

Stop & Start indicator (if

equipped) (P.309)

Stop & Start cancel indi-

*1, 2

Low speed four-wheel

drive indicator (if

equipped) (P.414, 417)

*3

cator

(if equipped)

( )

(P.309)

Brake hold standby indi-

*2

“AUTO LSD” indicator

(if equipped) (P.419)

cator (P.231)

Brake hold operated indi-

*2

Center differential lock (if

equipped) (P.417)

cator (P.231)

Rear differential lock indi-

cator (if equipped)

(P.421)

*7

Security indicator

(P.70, 71)

Low outside temperature

*8

Crawl Control indicator (if

equipped) (P.422)

indicator (P.82, 88)

AUTO mode indicator (if

equipped) (P.425)

Parking brake indicator

(P.227)

DIRT mode indicator (if

equipped) (P.425)

(U.S.A.)

Parking brake indicator

(P.227)

SAND mode indicator (if

equipped) (P.425)

(Canada)

80

2-1. Instrument cluster

head console.

MUD mode indicator (if

equipped) (P.425)

*8

*9

:When the outside temperature is

approximately 37°F (3°C) or

lower, the indicator will flash for

approximately 10 seconds, then

stay on.

DEEP SNOW mode indi-

cator (if equipped)

(P.425)

ROCK mode indicator (if

equipped) (P.425)

:This light comes on when the

stop lights are illuminated by the

operation of the brake pedal or

the driving assist system.

“TOW HAUL” indicator

(P.225)

SDM indicator (if

equipped) (P.436)

“AIR BAG ON/OFF”

*1, 7

■Intuitive parking assist OFF

indicator

Vehicles without multimedia display:

The indicators turn off when the shift

position is changed to R regardless

of whether the intuitive parking

indicator

(P.44)

Stop lights indica-

*9

assist function is turned on or off.

tor

*1

:The light comes on when the

system is turned off.

*2

:These lights come on when the

engine switch is turned to ON to

indicate that a system check is

being performed. They will turn

off after the engine is started, or

after a few seconds. There may

be a malfunction in a system if

the lights do not turn on, or turn

off. Have the vehicle inspected

by your Toyota dealer.

*3

:Depending on the operating con-

dition, the color and illuminat-

ing/flashing state of the light

change.

*4

*5

:Vehicles without multimedia dis-

play or rear camera on.

:This light illuminates on the

multi-information display with a

message.

*6

*7

:This light illuminates on the out-

side rear view mirrors.

:This light illuminates on the over-

81

2-1. Instrument cluster

Gauges and meters (7-inch display)

The meters display various drive information.

Meter display

2

The units used on the meter and display may differ depending on the target

region.

Engine coolant temperature gauge

Displays the engine coolant temperature.

Outside temperature (P.82)

Analog meter

The dial type of analog meter can be changed on

of the multi-informa-

tion display. (P.97)

Tachometer: Displays the engine speed in revolutions per minute.

Analog speed meter: Displays the vehicle speed.

Digital speedometer

Displays the vehicle speed.

Shift position and shift range indicator

Displays the selected shift position or selected shift range. (P.222)

Clock (P.84)

Automatically adjusts the time by using the GPS time information (GPS

clock). For details, refer to “MULTIMEDIA OWNER’S MANUAL”.

82

2-1. Instrument cluster

Fuel gauge

Displays the quantity of fuel remaining in the tank.

In the following situations, the actual quantity of fuel remaining in the tank

may not be displayed correctly. Refer to P.83 if the actual quantity of fuel

remaining in the tank is not displayed correctly.

• A small amount of fuel is added.

• Fuel is added with the fuel gauge near or at “F”.

• The vehicle is stopped on an uneven surface, such as a slope.

• The vehicle is driven on a slope or around a curve.

Distance to empty

Displays driving range with remaining fuel. (P.83)

Multi-information display

Presents the driver with a variety of vehicle data. (P.91)

Displays warning messages if a malfunction occurs. (P.587)

Odometer and distance until next engine oil change display

Odometer:

Displays the total distance the vehicle has been driven.

Distance until next engine oil change:

Displays the distance the vehicle can be driven until an oil change is neces-

sary.

The distance until the next engine oil change will also be displayed in the

following situations:

• When the engine switch is turned to ON.

• When a warning message indicating that oil maintenance should be per-

formed soon or is required is displayed.

• Resetting: P.532

■The meters and display illumi-

nate when

The engine switch is in ON.

■When the drive mode is

changed

Background color is changed follow-

ing the selected driving mode.

(P.412)

■If the units of measure for

speedometer can be changed

■Outside temperature display

●Displays the outside temperature

within the range of -40°F (-40°C)

to 140°F (60°C).

The other units of measure is also

displayed as shown in the illustra-

tions.

●When the outside temperature is

approximately 37°F (3°C) or

lower, the indicator

will flash

83

2-1. Instrument cluster

tance that can be driven may differ

from that displayed.

for approximately 10 seconds,

then stay on.

●When only a small amount of fuel

is added to the tank, the display

may not be updated. When refuel-

ing, turn the engine switch off. If

the vehicle is refueled without

turning the engine switch off, the

display may not be updated.

●In the following situations, the cor-

rect outside temperature may not

be displayed, or the display may

take longer than normal to

change.

• When stopped, or driving at low

speeds (less than 12 mph [20

km/h])

• When the outside temperature

has changed suddenly (at the

entrance/exit of a garage, tunnel,

etc.)

●When “Refuel” is displayed, the

remaining fuel amount is low and

the distance that can be driven

with the remaining fuel cannot be

calculated. Refuel immediately.

2

●When “--” or “E” is displayed, the

system may be malfunctioning.

Take your vehicle to your Toyota

dealer.

■Liquid crystal display

P.91

■Free/open Source Software

Information

■Fuel gauge and driving range

display

This product contains Free/Open

Source Software (FOSS). The

license information and/or the

source code of such FOSS can be

found at the following URL.

The fuel gauge and driving range

display are linked. If the fuel gauge

and driving range display do not

update after refueling a small

amount, they can be updated by

performing the following procedure:

rd-tech/oss/890

1 Stop the vehicle on a level sur-

■Customization

face.

The gauges and meters can be cus-

Wait until the fuel in the fuel tank

stabilizers.

tomized in

of the multi-informa-

2 Turn the engine switch off.

tion display. (P.637)

3 While pressing and holding

WARNING

of the meter control switch, turn

the engine switch to ON.

■The information display at

low temperatures

4 Continue holding

of the

Allow the interior of the vehicle to

warm up before using the liquid

crystal information display. At

extremely low temperatures, the

information display monitor may

respond slowly, and display

changes may be delayed.

meter control switch for approxi-

mately 5 seconds.

Release the button when the odom-

eter begins blinking.

Updating will be complete when the

odometer blinks for approximately 5

seconds and then returns to the nor-

mal display.

■Distance to empty

●This distance is computed based

on your average fuel consump-

tion. As a result, the actual dis-

84

2-1. Instrument cluster

WARNING

Toyota dealer.

For example, there is a lag

between the driver’s shifting and

the new gear number appearing

on the display. This lag could

cause the driver to downshift

again, causing rapid and exces-

sive engine braking and possibly

an accident resulting in death or

injury.

Instrument panel light

control

The brightness of the instrument

panel lights can be adjusted.

Pressing the button will adjust

brightness of the instrument

panel light.

NOTICE

The brightness of the instrument

panel lights can be adjusted by

pressing the button.

■To prevent damage to the

engine and its components

●Do not let the indicator needle

of the tachometer enter the red

zone, which indicates the maxi-

mum engine speed.

Short press: 1 step change of

brightness level.

Long press: continues change of

brightness level until released.

●The engine may be overheating

if the engine coolant tempera-

ture gauge is in the red zone

(H). In this case, immediately

stop the vehicle in a safe place,

and check the engine after it

has cooled completely.

(P.612)

Adjusting the clock

The clocks on the following can

be adjusted on the multimedia

system screen.

■Instrument cluster brightness

adjustment

The instrument cluster brightness

levels when the tail lights are on and

off can be adjusted individually.

However, when the surroundings

are bright (daytime, etc.), turning on

the tail lights will not change the

instrument cluster brightness.

 Multi-information display

 Multimedia system screen

For details, refer to “MULTIME-

DIA OWNER’S MANUAL”.

■Clock settings screen

If “Clock:00” is displayed when

is selected on the multi-information

display, the system may be malfunc-

tioning.

Have the vehicle inspected by your

85

2-1. Instrument cluster

Gauges and meters (12.3-inch display)

The meters display various drive information.

Meter display

■ Locations of gauges and meters

The meter type can be changed on “

Settings” of the multi-infor-

2

mation display. (P.108)

 Type 1/Type 2

The units of measure may differ depending on the intended destination of

the vehicle.

Multi-information display

Presents the driver with a variety of vehicle data. (P.100)

Displays warning messages if a malfunction occurs. (P.587)

Outside temperature (P.88)

Analog meter (Type 2 only)

The dial type of analog meter can be changed on “

Settings” of the multi-

information display. (P.108)

Tachometer: Displays the engine speed in revolutions per minute.

Analog speedometer: Displays the vehicle speed.

Digital speedometer

Displays the vehicle speed.

86

2-1. Instrument cluster

Shift position and shift range indicator

Displays the selected shift position or selected shift range (P.222)

Clock (P.90)

Automatically adjusts the time by using the GPS time information (GPS

clock). For details, refer to “MULTIMEDIA OWNER’S MANUAL”.

Widget (Audio system-linked display)

Displays the selected audio source or track on the meter. (P.104)

While list of items for content display area (P.102) is displayed, widget will

not be displayed.

Distance to empty

Displays driving range with remaining fuel. (P.89)

Fuel gauge

Displays the quantity of fuel remaining in the tank.

In the following situations, the actual quantity of fuel remaining in the tank

may not be displayed correctly. Refer to P.89 if the actual quantity of fuel

remaining in the tank is not displayed correctly.

• A small amount of fuel is added.

• Fuel is added with the fuel gauge near or at “F”.

• The vehicle is stopped on an uneven surface, such as a slope.

• The vehicle is driven on a slope or around a curve.

Engine coolant temperature gauge

Displays the engine coolant temperature.

Odometer and distance until next engine oil change display

Odometer:

Displays the total distance the vehicle has been driven.

Distance until next engine oil change:

Displays the distance the vehicle can be driven until an oil change is neces-

sary.

The distance until the next engine oil change will also be displayed in the

following situations:

• When the engine switch is turned to ON.

• When a warning message indicating that oil maintenance should be per-

formed soon or is required is displayed.

• Resetting: P.532

Widget (Fuel Economy)

Displays fuel economy information. (P.103)

While list of items for content display area (P.102) is displayed, widget will

not be displayed.

87

2-1. Instrument cluster

 Type 3

2

Tachometer

Displays the engine speed in revolutions per minute.

Multi-information display

Presents the driver with a variety of vehicle data. (P.100)

Displays warning messages if a malfunction occurs. (P.587)

Outside temperature (P.88)

Digital speedometer

Displays the vehicle speed.

Shift position and shift range indicator

Displays the selected shift position or selected shift range (P.222)

Clock (P.90)

Automatically adjusts the time by using the GPS time information (GPS

clock). For details, refer to “MULTIMEDIA OWNER’S MANUAL”.

Analog speedometer

Displays the vehicle speed.

Distance to empty

Displays driving range with remaining fuel. (P.89)

Fuel gauge

Displays the quantity of fuel remaining in the tank.

In the following situations, the actual quantity of fuel remaining in the tank

may not be displayed correctly. Refer to P.89 if the actual quantity of fuel

remaining in the tank is not displayed correctly.

• A small amount of fuel is added.

88

2-1. Instrument cluster

• Fuel is added with the fuel gauge near or at “F”.

• The vehicle is stopped on an uneven surface, such as a slope.

• The vehicle is driven on a slope or around a curve.

Engine coolant temperature gauge

Displays the engine coolant temperature.

Odometer and distance until next engine oil change display

Odometer:

Displays the total distance the vehicle has been driven.

Distance until next engine oil change:

Displays the distance the vehicle can be driven until an oil change is neces-

sary.

The distance until the next engine oil change will also be displayed in the

following situations:

• When the engine switch is turned to ON.

• When a warning message indicating that oil maintenance should be per-

formed soon or is required is displayed.

• Resetting: P.532

■The meters and display illumi-

nate when

The engine switch is in ON.

■When the drive mode is

changed

Background color is changed follow-

ing the selected driving mode.

(P.412)

■If the units of measure for

speedometer can be changed

The other units of measure is also

displayed as shown in the illustra-

tions.

Type 1/Type 2

Type 3

■Outside temperature display

●Displays the outside temperature

within the range of -40°F (-40°C)

to 140°F (60°C).

●When the outside temperature is

approximately 37°F (3°C) or

lower, the indicator

will flash

for approximately 10 seconds,

89

2-1. Instrument cluster

from that displayed.

then stay on.

●When only a small amount of fuel

is added to the tank, the display

may not be updated. When refuel-

ing, turn the engine switch off. If

the vehicle is refueled without

turning the engine switch off, the

display may not be updated.

●In the following situations, the cor-

rect outside temperature may not

be displayed, or the display may

take longer than normal to

change:

• When stopped, or driving at low

speeds (less than 20 mph [12

km/h])

• When the outside temperature

has changed suddenly (at the

entrance/exit of a garage, tunnel,

etc.)

●When “Refuel” is displayed, the

remaining fuel amount is low and

the distance that can be driven

with the remaining fuel cannot be

calculated. Refuel immediately.

2

●When “--” or “E” is displayed, the

system may be malfunctioning.

Take your vehicle to your Toyota

dealer.

■Liquid crystal display

P.101

■Free/Open Source Software

Information

■Fuel gauge and driving range

display

Free and Open Source Software

Information

The fuel gauge and driving range

display are linked. If the fuel gauge

and driving range display do not

update after refueling a small

amount, they can be updated by

performing the following procedure:

This product contains free and open

source software. License informa-

tion and/or source code for such

free/open source software are avail-

able at the following URL:

1 Stop the vehicle on a level sur-

opensource/meter/toyota/

face.

Wait until the fuel in the fuel tank

stabilizes.

■Customization

The gauges and meters can be cus-

2 Turn the engine switch off.

tomized in “

Settings” of the

3 While pressing and holding

multi-information display. (P.637)

of the meter control switch, turn

the engine switch to ON.

WARNING

4 Continue holding

of the

■The information display at

meter control switch for approxi-

mately 5 seconds.

Release the button when the odom-

eter begins blinking.

Updating will be complete when the

odometer blinks for approximately 5

seconds and then returns to the nor-

mal display.

low temperatures

Allow the interior of the vehicle to

warm up before using the liquid

crystal information display. At

extremely low temperatures, the

information display monitor may

respond slowly, and display

changes may be delayed.

■Distance to empty

●This distance is computed based

on your average fuel consump-

tion. As a result, the actual dis-

tance that can be driven may differ

90

2-1. Instrument cluster

WARNING

Toyota dealer.

For example, there is a lag

between the driver’s shifting and

the new gear number appearing

on the display. This lag could

cause the driver to downshift

again, causing rapid and exces-

sive engine braking and possibly

an accident resulting in death or

injury.

Adjusting the instrument

panel light control

The brightness of the instrument

panel lights can be adjusted.

Pressing the button will adjust

brightness of the instrument

panel light.

NOTICE

The brightness of the instrument

panel lights can be adjusted by

pressing the button.

■To prevent damage to the

engine and its components

●Do not let the indicator needle

of the tachometer enter the red

zone, which indicates the maxi-

mum engine speed.

Short press: 1 step change of

brightness level.

Long press: continues change of

brightness level until released.

●The engine may be overheating

if the engine coolant tempera-

ture gauge is in the red zone

(H). In this case, immediately

stop the vehicle in a safe place,

and check the engine after it

has cooled completely.

(P.612)

Adjusting the clock

The clocks on the following can

be adjusted on the multimedia

system screen.

■Instrument cluster brightness

adjustment

The instrument cluster brightness

levels when the tail lights are on and

off can be adjusted individually.

 Multi-information display

 Multimedia system screen

However, when the surroundings

are bright (daytime, etc.), turning on

the tail lights will not change the

instrument cluster brightness.

For details, refer to “MULTIMEDIA

OWNER’S MANUAL”.

■Clock settings screen

If “Clock:00” is displayed when “

Settings” is selected on the multi-

information display, the system may

be malfunctioning.

Have the vehicle inspected by your

91

2-1. Instrument cluster

tions.

■ Menu icons

Multi-information dis-

play (7-inch display)

Information related to each icon

can be displayed by selecting

the icon with the meter control

switches.

The multi-information dis-

play is used to display fuel

efficiency related informa-

tion and various types of

driving-related information.

The multi-information dis-

play can also be used to

change the display settings

and other settings.

Some of the information may be

displayed automatically depend-

ing on the situation.

2

Driving information display

(P.92)

Driving support system

information display

(P.93)

Display contents

Audio system-linked dis-

play (P.94)

■ Display

Vehicle information dis-

play (P.94)

Settings display (P.97)

Warning message display

(P.587)

■Liquid crystal display

Small spots or light spots may

appear on the display. This phenom-

enon is characteristic of liquid crys-

tal displays, and there is no problem

continuing to use the display.

RSA (Road Sign Assist) (if

equipped)

Displays recognized signs while the

RSA (Road Sign Assist) is operat-

ing. (P.288)

WARNING

■Caution for use while driving

Content display area

●When operating the multi-infor-

mation display while driving,

pay extra attention to the safety

of the area around the vehicle.

By selecting menu icons on the

multi-information display, a variety

of driving-related information can

be displayed. The multi-information

display can also be used to change

display settings and other vehicle

settings.

●Do not look continuously at the

multi-information display while

driving as you may fail to see

pedestrians, objects on the

road, etc., ahead of the vehicle.

Warning or advice pop-up displays

are also displayed in certain situa-

92

2-1. Instrument cluster

WARNING

Content of driving infor-

mation

■The information display at

low temperatures

■ Display items

 Fuel economy

P.83

 Eco Driving Indicator/Dis-

Changing the meter dis-

play

tance to empty

■ Fuel economy

The multi-information display is

operated using the meter control

switches.

Use the displayed values as a ref-

erence only.

Current fuel consumption

/

: Select menu icons

: Change displayed

Displays instantaneous current fuel

consumption.

content, scroll up/down the

screen and move the cursor

up/down

Average fuel economy (after

reset)

To reset the average fuel economy

display, press and hold the

meter control switch.

Press: Enter/Set

Press and hold: Reset/Dis-

play customizable items

The average fuel economy dis-

Return to the previous screen

play can be changed in

.

Call sending/receiving and

history display

(P.97)

 Average fuel economy (after

Linked with the hands-free system,

sending or receiving call is dis-

played. For details regarding the

hands-free system, refer to the

“MULTIMEDIA OWNER’S MAN-

UAL”.

start)

Displays the average fuel con-

sumption since engine start.

 Average fuel economy (after

refuel)

93

2-1. Instrument cluster

Displays the average fuel con-

sumption since the vehicle was

refueled.

If the vehicle is refueled without

turning the engine switch to OFF,

the display may not be updated.

●When “Refuel” is displayed, the

remaining fuel amount is low and

the distance that can be driven

with the remaining fuel cannot be

calculated. Refuel immediately.

■ Eco Driving Indicator/Dis-

tance to empty

 Eco Driving Indicator

Driving support system

information display

2

■ Driving support system

information

Select to display the operational

status of the following systems:

 LDA (Lane Departure Alert)

(P.275)

Eco Driving Indicator Zone

Display

 LTA (Lane Tracing Assist)

(P.270)

Suggests the Zone of Eco driving

with current Eco driving ratio based

on acceleration.

 Dynamic radar cruise control

(P.290)

Eco driving ratio based on

acceleration

 Cruise control (P.301)

If the acceleration exceeds the

Zone of Eco driving, the right side

of the Eco Driving Indicator Zone

Display will illuminate.

 PCS (Pre-Collision System)

(P.259)

 PDA (Proactive driving assist)

(P.281)

Zone of Eco driving

■ Navigation system-linked

display

 Distance to empty

Displays the driving range with

remaining fuel. (P.83)

Select to display the following

navigation system-linked infor-

mation:

■Distance to empty

 Route guidance to destination

●This distance is computed based

on your average fuel consump-

tion. As a result, the actual dis-

tance that can be driven may differ

from that displayed.

 Compass display (heading-up

display)

●When only a small amount of fuel

is added to the tank, the display

may not be updated. When refuel-

ing, turn the engine switch to OFF.

94

2-1. Instrument cluster

since engine start^*

Audio system-linked dis-

play

• “Distance”: Displays the dis-

tance driven since engine

The operating conditions of the

audio system can be displayed

on the multi-information display.

start^*

• “Total Time”: Displays the

elapsed time since engine

start^*

Vehicle information dis-

play

*

: These items are reset each time

the engine stops.

■ Trip information

■ Trailer brake (if equipped)

2 items that are selected using

the “TRIP A Items” or “TRIP B

Items” setting (average speed,

distance and total time) can be

displayed vertically.

Displays trailer brake control

status (P.437) and trailer

type^*.

*

: To select the trailer, press and

hold the

meter control switch.

Use the displayed information

as a reference only.

(P.92)

• “Average Speed”: Displays

the average vehicle speed

since the display was reset^*

• “Distance”: Displays the dis-

tance driven since the display

■ Trailer Mode BSM

Displays trailer length^*and

trailer blind spot status

(P.316).

was reset^*

*

: To select the trailer, press and

• “Total Time”: Displays the

elapsed time since the display

hold the

meter control switch.

(P.92)

was reset^*

■ Drive information

*

: To reset, display the desired item

and press and hold the meter

control switch.

2 items that are selected using

the “Drive Info Items” setting

(average speed, distance and

total time) can be displayed ver-

tically.

■ Tire inflation pressure

Displays inflation pressure of

each tire.

Use the displayed information as a

reference only.

Following items will be displayed.

• “Average Speed”: Displays

the average vehicle speed

95

2-1. Instrument cluster

■ Traction monitor display

(4WD models)

Degree markers of incline to

the front and rear

2

Indicates the vehicle inclination in

degrees in the front and rear direc-

tions.

Front tire direction display

Displays the operation amount and

direction of the steering wheel via

changes to the front tires on the

display.

Degree markers of incline to

the left and right

Indicates the vehicle inclination in

degrees in the left and right direc-

tions.

Wheel spin display

When a tire is spinning, its icon on

the display changes its color and

blinks.

Pointer

This item is displayed only when

driving mode is set to sport mode.

Indicates the degree of the vehicle

inclination in comparison to a paral-

lel line.

The illustration used is intended

as an example, and may differ

from the image that is actually

displayed on the multi-informa-

tion display.

■ Voltmeter and Engine oil

pressure gauge

■ Clinometer

Clinometer displays the vehicle

inclination to the front, rear, left

and right within a range of 0° to

approximately 30°.

Voltmeter

Displays the charge state

Engine oil pressure gauge

Displays the engine oil pressure

96

2-1. Instrument cluster

■ Engine oil temperature

gauge and Transmission oil

temperature gauge

■Engine oil pressure gauge

When the value of the engine oil

pressure gauge drops while the

engine is running, stop the vehicle

in a safe place immediately and

check the amount of engine oil.

(P.531)

When the oil pressure drops even

though the engine oil amount has

not decreased, or if the oil pres-

sure does not increase when

engine oil is added, contact your

Toyota dealer, as there may be a

problem with the lubrication sys-

tem.

Engine oil temperature

gauge

Displays the engine oil temperature

Trailer settings screen

 Trailer settings screen

Transmission oil tempera-

ture gauge

Displays the transmission oil fluid

temperature

■ Boost gauge

Displays the boost pressure.

Displays the name of the cur-

rently selected trailer or “No

Trailer Selected” if a trailer

has not yet been selected

Add a new trailer or select an

existing saved trailer

• Maximum of 10 trailers can be

saved.

NOTICE

■Voltmeter

• Select the trailer name, length,

hitch type, brake type and num-

ber of axles.

• The parameters which can be set

depend on which of the trailer

systems are installed on the vehi-

cle. (Trailer Brake Controller,

When the voltmeter indicates 19

V or higher or 9 V or lower while

the engine is running, there may

be a battery or charging system

malfunction. Have the vehicle

inspected at your Toyota dealer.

97

2-1. Instrument cluster

Trailer Backup Guide and Trailer

Mode BSM)

neck and fifth wheel trailers

are not supported for some

features (Trailer Backup

Guide and Trailer Mode

BSM)

Deselect the currently

selected trailer

• Used when a 4-pin trailer connec-

tor has been disconnected. (4-pin

trailer connector disconnection

cannot be automatically detected

by Trailer Brake Controller)

Change the length of the

trailer. If the exact length is

not listed, round up the actual

length of the trailer to the

closest available value.

Edit the parameters of a

2

saved trailer (name, length,

hitch type, brake type and

number of axles)

“Auto” length detection can also be

selected.

Change the number of axles.

• The parameters which can be

edited depend on which of the

trailer systems are installed on

the vehicle (Trailer Brake Control-

ler, Trailer Backup Guide and

Trailer Mode BSM)

Change the brake type (elec-

tric or electric over hydraulic)

and weight of the trailer, or

turn trailer brakes off for that

trailer.

Delete a saved trailer

Save the trailer information

 Trailer detail screen

If there are any errors with the

trailer values, re-select the value or

delete and re-save the trailer. If the

error continues, contact your Toy-

ota dealer.

Settings display

■ Meter display settings that

can be changed

Displays the name of the cur-

rent trailer which is being

added or edited.

 Language

Select to change the language dis-

played.

Change the name of the

trailer.

 Units

Select to change the units of mea-

sure displayed.

Change the hitch type of the

trailer between ball hitch

 Meter Style

(conventional), gooseneck or

fifth wheel. Note that goose-

The design of the meter display can

be changed.

98

2-1. Instrument cluster

 Dial Type

■ Vehicle functions and set-

tings that can be changed

Select to change dial type.

P.637



(Driving information dis-

play settings)

■Suspension of the settings dis-

play

• Fuel economy display

●Some settings cannot be changed

while driving. When changing set-

tings, park the vehicle in a safe

place.

Select to change the average fuel

consumption display between after

start/after reset/after refuel.

(P.92)

●If a warning message is displayed,

operation of the settings display

will be suspended.



(Audio settings)

Select to display/not display the

audio system linked display.

WARNING

■Cautions during setting up



(Vehicle information dis-

play settings)

the display

If the engine is running when

changing the display settings,

ensure that the vehicle is parked

in a place with adequate ventila-

tion. In a closed area such as a

garage, exhaust gases including

harmful carbon monoxide (CO)

may collect and enter the vehicle.

This may lead to death or a seri-

ous health hazard.

Select to change the displayed con-

tent of the following:

• Drive information and Trip A/B

items

Select to set the first and second

items of the drive information dis-

play to any of the following: aver-

age vehicle

NOTICE

speed/distance/elapsed time.

■During setting up the display

 Pop-up display

To prevent battery discharge,

ensure that the engine is running

while setting up the display fea-

tures.

Select to enable/disable pop-up

displays for each relevant system.

 Multi-information display off

Select to turn the multi-information

display off.

Stop & Start system infor-

mation (if equipped)

To turn the multi-information display

on again, press any of the meter

control switches.

 Stop & Start system opera-

tion time (after start)/status

notification

 Default setting

Select to reset the meter display

settings to the default setting.

Displays the current amount of time

the engine has been stopped by the

operation of the Stop & Start sys-

99

2-1. Instrument cluster

tem.

sage asking if you wish to turn

the headlights off is displayed.

Also shows the status of the Stop &

Start system with a pop-up display.

(P.313)

To turn the headlights off, select

“Yes”.

 Stop & Start system settings

If the driver’s door is opened

after the engine switch is turned

off, this suggestion message will

not be displayed.

The length of time of the Stop &

Start system will operate when the

“A/C” switch of the air conditioning

system is on can be set to 2 differ-

■ Suggestion to enable the

power back door^*

2

ent levels in “

Settings” of the

multi-information display. (P.313)

If the power back door system is

disabled (setting on

set to

Suggestion function

off) and the power back door

switch on the instrument panel

is operated, a suggestion mes-

sage will be displayed asking if

you wish to enable the power

back door system. To enable the

power back door system, select

“Yes”.

Displays suggestions to the

driver in the following situations.

To select a response to a dis-

played suggestion, use the

meter control switches.

■ Suggestion to turn on the

headlights

If the headlight switch is in other

After enabling the power back

door system, press the power

back door switch again to open

or close the power back door.

than

or

, and the

vehicle speed is 3 mph (5 km/h)

or higher for a certain amount of

time when the surroundings are

dark, a suggestion message will

be displayed.

*

: If equipped

■Customization

The suggestion function can be

turned on/off. (P.637)

■ Suggestion to turn off the

headlights

If the headlights are left on for a

certain amount of time after the

engine switch has been turned

off, a suggestion message will

be displayed.

When the headlight switch is in

the AUTO position: The mes-

100

2-1. Instrument cluster

system is displayed on the content

display area, the system operating

state will not be displayed in this

area.

Multi-inform at ion dis-

play (12.3-inch dis-

play)

RSA (Road Sign Assist) dis-

play area (if equipped)

(P.288)

The multi-information dis-

play is used to display fuel

efficiency related informa-

tion and various types of

driving-related information.

The multi-information dis-

play can also be used to

change the display settings

and other settings.

■ Content display area (cen-

ter)

 Blank

 Driving support system infor-

mation display (P.103)

 Map display (P.104)

 Trailer settings screen

(105)

Display contents

Following information is dis-

played in each area on the

multi-information display.

 Settings display (P.108)

 Warning message display

■ Content display area

(left/right)

 Blank

 Fuel Economy (P.103)

 Eco Driving Indicator

(P.103)

 Driving support system infor-

mation display (P.103)

 Navigation system-linked dis-

play (P.104)

 Audio system-linked display

(P.104)

Content display area (left)

Content display area (center)

Content display area (right)

 Drive information display

(P.104)

 Tire inflation pressure

(P.105)

Driving support system infor-

mation display area

 Traction monitor display (if

equipped) (P.105)

When driving information support

101

2-1. Instrument cluster

 Trailer brake (if equipped)

(P.106)

 Trailer mode BSM (P.106)

 Clinometer (if equipped)

(P.106)

 Voltmeter and Engine oil pres-

sure gauge (P.107)

 Engine oil temperature gauge

and Transmission oil tem-

perature gauge (P.107)

/

: Change displayed

2

content and scroll up/down

the screen

 Boost gauge (P.108)

/

: Change the screen

■Liquid crystal display

and move the cursor

Small spots or light spots may

Press: Enter/Set

appear on the display. This phenom-

enon is characteristic of liquid crys-

tal displays, and there is no problem

continuing to use the display.

Press and hold: Reset/Dis-

play customizable items/Dis-

play the cursor

WARNING

Return to the previous screen

■Caution for use while driving

Call sending/receiving and

history display

●When operating the multi-infor-

mation display while driving,

pay extra attention to the safety

of the area around the vehicle.

Linked with the hands-free system,

sending or receiving call is dis-

played. For details regarding the

hands-free system, refer to the

“MULTIMEDIA OWNER’S MAN-

UAL”.

●Do not look continuously at the

multi-information display while

driving as you may fail to see

pedestrians, objects on the

road, etc., ahead of the vehicle.

■The information display at

low temperatures

Changing the display

P.89

The multi-information display is

operated using the meter control

switches.

Changing the meter dis-

play

■ Changing the meter display

type setting

The multi-information display is

operated using the meter control

switches.

The meter display type setting

can be changed on “

Set-

102

2-1. Instrument cluster

■ Items displayed in the con-

tings”. (P.108)

tent display area

■ Changing the screen

Select items to enable/disable

on the content display area

(left/right).

Select items from the combina-

tion of 3 screens to display on

each 3 content display areas.

1 Press and hold

to display

Press

or

of the meter

area (center).

control switches to scroll the

screen.

2 Press

or

to move the

cursor and select the content

display area.

3 Contents display area (left):

Press

to display contents

list.

Contents display area (right):

Press

list.

to display contents

4 Press

or

to select the

display items.

■ Changing the display con-

tents

5 Press

to enable/disable

Switches items displayed on

each contents display area

(left/center/right).

items.

WARNING

■Caution for use while driving

1 Press and hold

to display

For safety, avoid operating the

meter control switches while driv-

ing as much as possible, and do

not look continuously at the multi-

information display while driving.

Stop the vehicle and operate the

meter control switches. Failure to

do so may cause a steering wheel

operation error, resulting in an

unexpected accident.

the cursor on the content dis-

play area (center).

2 Press

or

to move the

cursor and select the content

display area.

3 Press

or

to select the

display items.

103

2-1. Instrument cluster

Fuel Economy

Eco Driving Indicator

2

Current fuel economy

Eco Driving Indicator Zone

Display

Displays the instantaneous current

fuel consumption.

Suggests the Zone of Eco driving

with current Eco driving ratio based

on acceleration.

Average fuel economy

Displays the average fuel economy

since the function was reset or the

average fuel economy after starting

Eco driving ratio based on

acceleration

*1, 2, 3

or refueling.

If the acceleration exceeds the

Zone of Eco driving, the right side

of the Eco Driving Indicator Zone

Display will illuminate.

The average fuel economy

selected by Fuel Economy on

the “

Settings” screen is dis-

Zone of Eco driving

played.

*1

:Use the displayed fuel consump-

tion as a reference only.

Driving support system

information display

*2

*3

:Average fuel economy after

starting is reset each time the

engine stops.

Select to display the operational

status of the following systems:

 LDA (Lane Departure Alert)

(P.275)

:Average fuel economy since

function was reset can be reset

 LTA (Lane Tracing Assist)

(P.270)

by pressing and holding

.

 Dynamic radar cruise control

(P.290)

 Cruise control (P.301)

 PDA (Proactive driving assist)

(P.281)

104

2-1. Instrument cluster

 PCS (Pre-Collision System)

(P.259)

Following items will be dis-

played.

 “Average Speed”: Displays

the average vehicle speed

Map display

since engine start^*

Displays the map data accord-

ing to the navigation system.

 “Distance”: Displays the dis-

tance driven since engine

Switches the displayed map

start^*

size by pressing

.

 “Total Time”: Displays the

elapsed time since engine

start^*

Navigation system-linked

display

*

: These items are reset each time

the engine stops.

Select to display the following

navigation system-linked infor-

mation:

■ Trip information

2 items that are selected using

the “TRIP A Items” or “TRIP B

Items” setting (average speed,

distance and total time) can be

displayed vertically.

 Route guidance to destination

 Compass display (heading-up

display)

Use the displayed information as a

reference only.

Audio system-linked dis-

play

 “Average Speed”: Displays

the average vehicle speed

The operating conditions of the

audio system can be displayed

on the multi-information display.

since the display was reset^*

 “Distance”: Displays the dis-

tance driven since the display

Driving information dis-

play

was reset^*

 “Total Time”: Displays the

elapsed time since the display

■ Drive information

was reset^*

2 items that are selected using

the “Drive Info Items” setting

(average speed, distance and

total time) can be displayed ver-

tically.

*

: To reset, display the desired item

and press and hold

.

Use the displayed information as a

reference only.

105

2-1. Instrument cluster

Tire inflation pressure

Trailer settings screen

Displays inflation pressure of

each tire.

 Trailer settings screen

Traction monitor display

(4WD models)

2

Displays the name of the cur-

rently selected trailer or “No

Trailer Selected” if a trailer

has not yet been selected

Add a new trailer or select an

Front tire direction display

existing saved trailer

• Maximum of 10 trailers can be

saved.

• Select the trailer name, length,

hitch type, brake type and num-

ber of axles.

Displays the operation amount and

direction of the steering wheel via

changes to the front tires on the

display.

Wheel spin display

• The parameters which can be set

depend on which of the trailer

systems are installed on the vehi-

cle. (Trailer Brake Controller,

Trailer Backup Guide and Trailer

Mode BSM)

When a tire is spinning, its icon on

the display changes its color and

blinks.

This item is displayed only when

driving mode is set to sport mode.

The illustration used is intended as

an example, and may differ from

the image that is actually displayed

on the multi-information display.

Deselect the currently

selected trailer

• Used when a 4-pin trailer connec-

tor has been disconnected. (4-pin

trailer connector disconnection

cannot be automatically detected

by Trailer Brake Controller)

Edit the parameters of a

saved trailer (name, length,

hitch type, brake type and

number of axles)

106

2-1. Instrument cluster

• The parameters which can be

edited depend on which of the

trailer systems are installed on

the vehicle (Trailer Brake Control-

ler, Trailer Backup Guide and

Trailer Mode BSM)

Change the number of axles.

Change the brake type (elec-

tric or electric over hydraulic)

and weight of the trailer, or

turn trailer brakes off for that

trailer.

Delete a saved trailer

 Trailer detail screen

Save the trailer information

If there are any errors with the

trailer values, re-select the value or

delete and re-save the trailer. If the

error continues, contact your Toy-

ota dealer.

Trailer brake (if equipped)

Displays trailer brake control

status (P.437) and trailer

Displays the name of the cur-

rent trailer which is being

added or edited.

type^*.

*

: To select the trailer, press and

Change the name of the

trailer.

hold the

meter control switch.

(P.101)

Change the hitch type of the

trailer between ball hitch

(conventional), gooseneck or

fifth wheel. Note that goose-

neck and fifth wheel trailers

are not supported for some

features (Trailer Backup

Guide and Trailer Mode

BSM)

Trailer mode BSM

Displays trailer length^*and

trailer blind spot status

(P.316).

*

: To select the trailer, press and

hold the

meter control switch.

(P.101)

Change the length of the

trailer. If the exact length is

not listed, round up the actual

length of the trailer to the

closest available value.

Clinometer (if equipped)

Clinometer displays the vehicle

inclination to the front, rear, left

and right within a range of 0° to

approximately 30°.

“Auto” length detection can also be

selected.

107

2-1. Instrument cluster

Displays the engine oil pressure

NOTICE

■Voltmeter

When the voltmeter indicates 19

V or higher or 9 V or lower while

the engine is running, there may

be a battery or charging system

malfunction. Have the vehicle

inspected at your Toyota dealer.

Degree markers of incline to

the front and rear

■Engine oil pressure gauge

2

When the value of the engine oil

pressure gauge drops while the

engine is running, stop the vehicle

in a safe place immediately and

check the amount of engine oil.

(P.531)

When the oil pressure drops even

though the engine oil amount has

not decreased, or if the oil pres-

sure does not increase when

engine oil is added, contact your

Toyota dealer, as there may be a

problem with the lubrication sys-

tem.

Indicates the vehicle inclination in

degrees in the front and rear direc-

tions.

Degree markers of incline to

the left and right

Indicates the vehicle inclination in

degrees in the left and right direc-

tions.

Pointer

Indicates the degree of the vehicle

inclination in comparison to a paral-

lel line.

Engine oil temperature

gauge and Transmission

oil temperature gauge

Voltmeter and Engine oil

pressure gauge

Engine oil temperature

gauge

Displays the engine oil temperature

Voltmeter

Displays the charge state

Transmission oil tempera-

ture gauge

Engine oil pressure gauge

108

2-1. Instrument cluster

Displays the transmission oil fluid

temperature

items

Select to set the first and second

items of the drive information dis-

play to any of the following: aver-

age vehicle

Boost gauge

Displays the boost pressure.

speed/distance/elapsed time.

 Pop-up display

Select to enable/disable pop-up

displays for each relevant system.

 Default setting

Select to reset the meter display

settings to the default setting.

■ Vehicle functions and set-

tings that can be changed

P.637

Settings display

■ Meter display settings that

■Suspension of the settings dis-

play

can be changed

●Some settings cannot be changed

while driving. When changing set-

tings, park the vehicle in a safe

place.

 Language

Select to change the language dis-

played.

●If a warning message is displayed,

operation of the settings display

will be suspended.

 Units

Select to change the units of mea-

sure displayed.

WARNING

 Meter Type

■Cautions during setting up

the display

Select to change the meter type

setting.

If the engine is running while

changing certain settings on the

settings display, ensure that the

vehicle is parked in a place with

adequate ventilation. In a closed

area such as a garage, exhaust

gases including harmful carbon

monoxide (CO) may collect and

enter the vehicle. This may lead

to death or a serious health haz-

ard.

 Meter Style

Select to change the meter style.

 Dial Type

Select to change dial type.

 Fuel economy display

Select to change the average fuel

consumption display between after

start/after reset/after refuel.

(P.103)

 Drive information and Trip A/B

109

2-1. Instrument cluster

NOTICE

than

or

, and the

■During setting up the display

vehicle speed is 3 mph (5 km/h)

or higher for a certain amount of

time when the surroundings are

dark, a suggestion message will

be displayed.

To prevent battery discharge,

ensure that the engine is running

while setting up the display fea-

tures.

Stop & Start system infor-

mation (if equipped)

■ Suggestion to turn off the

headlights

2

If the headlights are left on for a

certain amount of time after the

engine switch has been turned

off, a suggestion message will

be displayed.

 Stop & Start system opera-

tion time (after start)/status

notification

Displays the current amount of time

the engine has been stopped by the

operation of the Stop & Start sys-

tem.

When the headlight switch is in

the AUTO position: The mes-

sage asking if you wish to turn

the headlights off is displayed.

To turn the headlights off, select

“Yes”.

Also shows the status of the Stop &

Start system with a pop-up display.

(P.313)

 Stop & Start system settings

If the driver’s door is opened

after the engine switch is turned

off, this suggestion message will

not be displayed.

The length of time of the Stop &

Start system will operate when the

“A/C” switch of the air conditioning

system is on can be set to 2 differ-

ent levels in “

Settings” of the

■ Suggestion to enable the

power back door^*

multi-information display. (P.313)

If the power back door system is

Suggestion function

disabled (setting on

set to

Displays suggestions to the

driver in the following situations.

To select a response to a dis-

played suggestion, use the

meter control switches.

off) and the power back door

switch on the instrument panel

is operated, a suggestion mes-

sage will be displayed asking if

you wish to enable the power

back door system. To enable the

power back door system, select

“Yes”.

■ Suggestion to turn on the

headlights

If the headlight switch is in other

110

2-1. Instrument cluster

After enabling the power back

door system, press the power

back door switch again to open

or close the power back door.

Fuel consumption

inform at ion

Fuel consumption informa-

tion can be displayed on the

multimedia system.

*

: If equipped

■Customization

The suggestion function can be

turned on/off. (P.637)

Consumption

■ Current fuel consumption

screen

1 Select

on the main

menu.

2 Select “Trip information”.

If a screen other than “Current” is

displayed, select “Current”.

Average vehicle speed since

the engine was started.

Trip range

Elapsed time since the

111

2-1. Instrument cluster

engine was started.

tion

Fuel consumption in the past

15 minutes

Previous fuel consumption

record

Current fuel consumption

Resetting the history data

Resetting the consumption

data

Updating the latest fuel con-

sumption data

Use the displayed average fuel

consumption as a reference. The

image is an example only, and may

vary slightly from actual conditions.

Use the displayed average fuel

consumption as a reference. The

image is an example only, and may

vary slightly from actual conditions.

2

■ History fuel consumption

screen

■Updating the history data

Update the average fuel consump-

tion by selecting “Update” to mea-

sure the current fuel consumption

again.

1 Select

on the main

menu.

■Resetting the data

The fuel consumption data can be

deleted by selecting “Clear data”.

■Trip range

Displays the estimated maximum

distance that can be driven with the

quantity of fuel remaining.

As a result, the actual distance that

can be driven may differ from that

displayed.

2 Select “Trip information”.

If a screen other than “History” is

displayed, select “History”.

Latest fuel consumption

Best recorded fuel consump-

112

2-1. Instrument cluster

Vehicle status information and indicators for Your Toyota 4 Runner SUV Sixth Generation (2025-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals