Get Before driving -> Opening and closing the windows Guide for Toyota 86 2 Door First Generation (2012-2021)

1-4. Opening and closing the windows

Power windows

The power windows can be opened and closed using the switches.

Operating the switch moves the windows as follows:

Closing

One-touch closing*

Opening

One-touch opening*

*: Pushing the switch in the

opposite direction will stop win-

dow travel partway.

Window lock switch

Press the switch down to lock

the passenger window glasses.

Use this switch to prevent chil-

dren from accidentally opening or

closing a passenger window.

1-4. Opening and closing the windows

■The power windows can be operated when

Vehicles without a smart key system

The engine switch is in the “ON” position.

Vehicles with a smart key system

The “ENGINE START STOP” switch is in IGNITION ON mode.

■Operating the power windows after turning the engine off

Vehicles without a smart key system

The power windows can be operated for approximately 45 seconds even

after the engine switch is turned to the “ACC” or “LOCK” position. They can-

not, however, be operated once either door is opened.

Vehicles with a smart key system

The power windows can be operated for approximately 45 seconds even

after the “ENGINE START STOP” switch is turned to ACCESSORY mode or

turned off. They cannot, however, be operated once either door is opened.

■Jam protection function

If an object becomes caught between the window and the body, window

travel is stopped and the window is opened slightly.

■When the power window does not close normally

If the jam protection function is operating abnormally and a window cannot

be closed, close all the doors and perform the following operations using the

power window switch on the relevant door.

STEP

Vehicles without a smart key system: After stopping the vehicle, the

engine switch is turned to the “ON” position.

Vehicles with a smart key system: After stopping the vehicle, the

“ENGINE START STOP” switch is turned to IGNITION ON mode.

STEP

Hold the power window switch in the one-touch closing position two

consecutive times.

Hold the power window switch in the one-touch closing position

once again and continue holding for 1 second or more after the win-

dow closes completely.

If you push the power window switch to the opening position while the win-

dow is moving, start again from the beginning. If the window continues to

close but then re-open slightly even after performing the above procedure

correctly, have the vehicle inspected by your Toyota dealer.

1-4. Opening and closing the windows

WARNING

■Closing the windows

Observe the following precautions.

Failure to do so may result in death or serious injury.

●The driver is responsible for all the power window operations, including the

operation for the passengers. In order to prevent accidental operation,

especially by a child, do not let a child operate the power windows. It is

possible for children and other passengers to have body parts caught in

the power window. Also, when riding with a child, it is recommended to use

the window lock switch. (P. 72)

●Check to make sure that all passengers do not have any part of their body

in a position where it could be caught when a window is being operated.

●When exiting the vehicle, turn the engine switch (vehicles without a smart

key system) or the “ENGINE START STOP” switch (vehicles with a smart

key system) off, carry the key and exit the vehicle along with the child.

There may be accidental operation, due to mischief, etc., that may possi-

bly lead to an accident.

■Jam protection function

●Never use any part of your body to intentionally activate the jam protection

function.

●The jam protection function may not work if something gets caught just

before the window fully closes.

Before driving -> Opening and closing the windows for Your Toyota 86 2 Door First Generation (2012-2021)

Related Topics

Before driving

Popular Owner Manuals

Latest Owner Manuals