Get Before driving -> Opening, closing and locking the doors and trunk Guide for Toyota 86 2 Door Second Generation (2022-2025)

3-2. Opening, closing and locking the doors and trunk

103

3-2.Opening, closing and locking the doors and trunk

■

Wireless remote control

Doors

Unlocking and locking the

doors from the outside

■

Smart entry & start system

Carry the electronic key to enable

this function.

*1

1 Locks driver’s door

*2

Locks both side doors

3

Check that the door is securely locked.

Press and hold to close the windows.^*3

*1

2 Unlocks both side door

*2

Unlocks both side doors

1 Grip the door handle to unlock

Pressing the button unlocks the driver’s

door. Pressing the button again within 3

seconds unlocks the other doors.^*2

the doors.

Vehicles with a double locking system:

Grip the driver’s door handle to unlock

the door. Grip the passenger’s door

Press and hold to open the windows.^*3

^*1: Vehicles without a double locking

system

^*2: Vehicles with a double locking sys-

tem

^*3: These settings must be customized

at any authorized Toyota retailer or

Toyota authorized repairer, or any

reliable repairer.

handle to unlock both side doors.^*

Make sure to touch the sensor on the

back of the handle.

The doors cannot be unlocked for 3

seconds after the doors are locked.

^*: The door unlock settings can be

changed.

2 Touch the lock sensor (indenta-

tion on the side of the door han-

dle) to lock the doors.

■

Side window open/close function

linked to door operation

Check that the door is securely locked.

In order to make opening and closing

the doors easier, completely closed win-

dows are linked to door operations.

Therefore, when a door is opened, its

window opens slightly. When a door is

closed, its window closes completely.

However, if the battery has discharged

or is disconnected, this function will not

operate. (P.362)

3-2. Opening, closing and locking the doors and trunk

If the smart entry & start system or

104

■

Operation signals

■

the wireless remote control does

not operate properly

The emergency flashers flash to indicate

that the doors have been

locked/unlocked. (Locked: once;

Unlocked: twice)

Use the mechanical key and/or inside

lock buttons to lock and unlock the

doors. (P.357)

Replace the key battery with a new one

if it is depleted. (P.316)

■

Security feature (vehicles without a

double locking system)

If a door is not opened within approxi-

mately 30 seconds after the vehicle is

unlocked using the entry function or

wireless remote control, the security fea-

ture automatically locks the vehicle

again.

■

If the battery is discharged

The doors cannot be locked and

unlocked using the smart entry & start

system or wireless remote control. Lock

or unlock the doors using the mechani-

cal key. (P.357)

■

When the door cannot be locked by

the lock sensor on the surface of

the door handle

■

Customization

Some functions can be customized.

If the doors cannot be locked by touch-

ing the lock sensor with a finger, touch

the lock sensor with the palm of your

hand.

(P.377)

WARNING

■

To prevent an accident

If you are wearing gloves, remove them.

Ensure that both side doors are prop-

erly closed while driving the vehicle.

Failure to do so may result in a door

opening and an occupant being

thrown out of the vehicle, resulting in

death or serious injury.

■

When opening or closing a door

Check the surroundings of the vehicle

such as whether the vehicle is on an

incline, whether there is enough

space for a door to open and whether

a strong wind is blowing. When open-

ing or closing the door, hold the door

handle tightly to prepare for any

unpredictable movement.

■

Door lock buzzer

If an attempt to lock the doors using the

entry function or wireless remote control

is made when a door is not fully closed,

a buzzer will sound continuously for 5

seconds. Fully close the door to stop the

buzzer, and lock the doors again.

■

Side window open/close function

linked to door operation

■

Alarm (if equipped)

Locking the doors will set the alarm sys-

tem. (P.81)

Do not hold the upper edge of the

side window when you close the door.

Otherwise, your fingers or hand may

be caught in the window.

■

Conditions affecting the operation

of the smart entry & start system or

wireless remote control

P.111

3-2. Opening, closing and locking the doors and trunk

105

1 Locks the door

2 Unlocks the door

WARNING

■

When using the wireless remote

control and operating the power

windows

■

1

2

Locking the doors from the outside

without a key

Move the inside lock button to the

lock position.

Close the door while pulling the door

handle.

Operate the power window after

checking to make sure that there is no

possibility of any passenger having

any of their body parts caught in the

window. Also, do not allow children to

operate the wireless remote control. It

is possible for children and other pas-

sengers to get caught in the power

window.

The door cannot be locked if the engine

switch is in ACC or ON, or the electronic

key is left inside the vehicle. However,

the key may not be detected correctly

and the door may be locked.

■

Door lock prevention function

3

Unlocking and locking the

doors from the inside

This function prevents the doors from

being locked if an electronic key is left

inside the vehicle.

■

Door lock switches (to

lock/unlock)

■

Customization

Some functions can be customized.

(P.377)

1 Locks both side doors

2 Unlocks both side doors

■

Inside lock buttons (to

lock/unlock)

3-2. Opening, closing and locking the doors and trunk

106

●

Remove any heavy loads, such as

Trunk

snow and ice, from the trunk lid

before opening it. Failure to do so

may cause the trunk lid to suddenly

shut again after it is opened.

The trunk can be opened using

the trunk opener switch, entry

function or wireless remote

control.

●

Be careful not to come into contact

with the exhaust gasses when

opening or closing the trunk. If the

engine is running, there is a risk of

being burned by the exhaust

gasses.

WARNING

Observe the following precautions.

Failure to do so may result in death or

serious injury.

●

When opening or closing the trunk

lid, thoroughly check to make sure

the surrounding area is safe.

■

●

Before driving

Make sure that the trunk lid is

closed before driving. If not fully

closed, while driving, it may open

unexpectedly, hit near-by objects,

or luggage may fall out, possibly

leading to an accident.

If anyone is in the vicinity, make

sure they are safe and let them

know that the trunk is about to open

or close.

●

Use caution when opening or clos-

ing the trunk lid in windy weather as

it may move abruptly in strong wind.

Also, exhaust gasses may enter the

vehicle, possibly leading to death or

a serious health hazard.

The trunk lid may suddenly shut if it

is not opened fully. It is more diffi-

cult to open or close the trunk lid on

an incline than on a level surface,

so beware of the trunk lid unexpect-

edly opening or closing by itself.

Make sure that the trunk lid is fully

open and secure before using the

trunk.

●

■

Do not allow children to play in the

trunk.

If a child is accidentally locked in

the trunk, they could suffer from

heat exhaustion, suffocation or

other injuries.

Do not allow a child to open or

close the trunk lid.

Doing so may cause the trunk lid to

open unexpectedly, or cause the

child’s hands, head, or neck to be

caught by the closing trunk lid.

Important points while driving

Never let anyone sit in the trunk. In

the event of sudden braking or a colli-

sion, they are susceptible to death or

serious injury.

■

Using the trunk

Observe the following precautions.

Failure to do so may cause parts of

the body to be caught, resulting in

serious injury.

3-2. Opening, closing and locking the doors and trunk

107

●

Do not pull on the trunk damper

stay to close the trunk, and do not

hang on the trunk damper stay.

Doing so may cause hands to be

caught or the trunk damper stay to

break, causing an accident.

WARNING

●

When closing the trunk lid, take

extra care to prevent your fingers

etc. from being caught.

NOTICE

■

Using the trunk

When closing the trunk lid, do not

strongly push down on the trunk lid.

Doing so may dent the trunk lid.

●

When closing the trunk lid, make

sure to press it lightly on its outer

surface.

■

Trunk damper stays

3

The trunk lid is equipped with damper

stays that hold the trunk lid in place.

Observe the following precautions.

Failure to do so may cause damage

to trunk damper stays, resulting in a

malfunction.

Do not attach any accessories

other than genuine Toyota parts to

the trunk lid. Such additional weight

on the trunk lid may cause the lid to

suddenly shut again after it is

opened.

●

Do not attach any foreign objects

such as stickers, plastic sheets and

adhesives to damper stay rods.

■

Trunk lid damper stays

Do not pull on or disassemble the

trunk lid damper stays, or dispose of

them in a fire. Illustrations on the

trunk lid damper stays indicate the fol-

lowing:

●

Do not touch damper stay rods with

gloves or other fabric items.

Do not attach any accessories

other than genuine Toyota parts to

the trunk lid.

●

Do not apply lateral force to damper

stays or place your hand on it.

●

: Do not pull

: Do not disassemble

: Do not dispose of in fire

Opening/closing the trunk

■

Trunk opener switch

Press and hold the trunk opener

switch.

3-2. Opening, closing and locking the doors and trunk

108

■

Smart entry & start system

■

Trunk light

While carrying the electronic key,

press the button on the trunk lid.

The trunk light turns on when the trunk

is opened.

■

Function to prevent the trunk being

locked with the electronic key

inside

When all of the doors are unlocked,

the trunk lid can be opened while

not carrying an electronic key. How-

ever, as the doors will be locked

when the vehicle is driven (at a

vehicle speed of 5 km/h [3 mph] or

more), the trunk will not be able to

be opened until a door is opened.

●

When both side doors are locked,

closing the trunk lid with the electronic

key left inside the trunk will sound an

alarm.

In this case, the trunk lid can be

opened by pressing the trunk release

button on the trunk lid.

●

If the spare electronic key is put in the

trunk with both side doors locked, the

key confinement prevention function

is activated so the trunk can be

opened. In order to prevent theft, take

all electronic keys with you when leav-

ing the vehicle.

●

If the electronic key is put in the trunk

with both side doors locked, the key

may not be detected depending on

the location of the key and the sur-

rounding radio wave conditions. In this

case, the key confinement prevention

function cannot be activated, causing

the doors to lock when the trunk is

closed. Make sure to check where the

key is before closing the trunk.

■

Wireless remote control

Press and hold the switch.

●

The key confinement prevention func-

tion cannot be activated if either door

is unlocked. In this case, open the

trunk using the trunk opener.

3-2. Opening, closing and locking the doors and trunk

109

■

If the smart entry & start system or

the wireless remote control does

not operate properly

Smart entry & start sys-

tem

Replace the key battery with a new one

if it is depleted. (P.316)

The following operations can

be performed simply by carry-

ing the electronic key on your

person, for example in your

pocket. The driver should

always carry the electronic

key.

■

Customization

Some functions can be customized.

(P.377)

 Locks and unlocks the doors

(P.103)

3

 Opens the trunk (P.108)

 Starts the engine (P.139)

■

Antenna location

Antennas outside the cabin

Antennas inside the cabin

Antenna outside the trunk

Antenna inside the trunk

A

C

D

3-2. Opening, closing and locking the doors and trunk

110

■

Effective range (areas within which

the electronic key is detected)

Correction

procedure

Situation

Close both

side doors

and lock the

doors again.

An attempt was made

to lock the vehicle while

a door was open.

●

When an exterior alarm sounds once

for 2 seconds

Correction

Situation

When locking or unlocking the

doors

A

procedure

The trunk was closed

while the electronic key electronic key

was still inside the trunk from the trunk

and both side doors

were locked.

Retrieve the

The system can be operated when the

electronic key is within about 0.4  0.8

m (1.3  2.6 ft.) of an outside door han-

dle. (Only the doors detecting the key

can be operated.)

and close the

trunk lid.

When opening the trunk

●

When an interior alarm sounds contin-

uously

The system can be operated when the

electronic key is within about 0.4  0.8

m (1.3  2.6 ft.) of the trunk release but-

ton.

Correction

Situation

procedure

The engine switch was

When starting the engine or chang-

ing engine switch modes

turned to ACC while the Turn the

driver’s door was open engine switch

C

(or the driver’s door

was opened while the the driver’s

engine switch was in

ACC).

off and close

The system can be operated when the

electronic key is inside the vehicle.

door.

■

Alarms and warning messages

An alarm sounds and warning mes-

sages are displayed on the multi-infor-

mation display to protect against

unexpected accidents or theft of the

vehicle resulting from erroneous opera-

tion. When a warning message is dis-

played, take appropriate measures

based on the displayed message.

(P.344)

The engine switch was

turned off while the

driver’s door was open.

Close the

driver’s door.

■

Battery-saving function

The battery-saving function will be acti-

vated in order to prevent the electronic

key battery and the vehicle battery from

being discharged while the vehicle is not

in operation for a long time.

When only an alarm sounds, circum-

stances and correction procedures are

as follows.

●

In the following situations, the smart

entry & start system may take some

time to unlock the doors.

●

When an exterior alarm sounds once

for 5 seconds

ꢀ The electronic key has been left within

approximately 2 m (6 ft.) of the outside

of the vehicle for 10 minutes or longer.

3-2. Opening, closing and locking the doors and trunk

ꢀ The smart entry & start system has noise

111

not been used for 5 days or longer.

●

When carrying a portable radio, cellu-

lar phone, cordless phone or other

wireless communication device

●

If the smart entry & start system has

not been used for 14 days or longer,

the doors cannot be unlocked at the

passenger door. In this case, take

hold of the driver’s door handle, or

use the wireless remote control or

mechanical key, to unlock the doors.

●

When the electronic key is in contact

with, or is covered by the following

metallic objects

ꢀ Cards to which aluminum foil is

attached

ꢀ Cigarette boxes that have aluminum

foil inside

ꢀ Metallic wallets or bags

■

Electronic Key Battery-Saving

Function

When battery-saving mode is set, bat-

tery depletion is minimized by stopping

the electronic key from receiving radio

waves.

ꢀ Coins

ꢀ Hand warmers made of metal

ꢀ Media such as CDs and DVDs

●

When other wireless keys (that emit

radio waves) are being used nearby

3

Press

twice while pressing and

holding

key indicator flashes 4 times.

. Confirm that the electronic

●

When carrying the electronic key

together with the following devices

that emit radio waves

While the battery-saving mode is set,

the smart entry & start system cannot be

used. To cancel the function, press any

of the electronic key buttons.

ꢀ Another vehicle’s electronic key or a

wireless key that emits radio waves

ꢀ Personal computers or personal digi-

tal assistants (PDAs)

ꢀ Digital audio players

ꢀ Portable game systems

●

If window tint with a metallic content or

metallic objects are attached to the

rear window

When the electronic key is placed

near a battery charger or electronic

devices

■

●

Note for the entry function

■

Conditions affecting operation

Even when the electronic key is within

the effective range (detection areas),

the system may not operate properly

in the following cases:

The smart entry & start system uses

weak radio waves. In the following situa-

tions, the communication between the

electronic key and the vehicle may be

affected, preventing the smart entry &

start system, wireless remote control

and engine immobilizer system from

operating properly. (Ways of coping:

P.357)

ꢀ The electronic key is too close to the

window or outside door handle, near

the ground, or in a high place when

the doors are locked or unlocked.

ꢀ The electronic key is near the ground

or in a high place, or too close to the

rear bumper center when the trunk is

unlocked.

●

When the electronic key battery is

depleted

ꢀ The electronic key is on the instru-

ment panel, rear package tray or floor,

or in the door pockets or glove box

when the engine is started or engine

●

Near a TV tower, electric power plant,

gas station, radio station, large dis-

play, airport or other facility that gen-

erates strong radio waves or electrical

3-2. Opening, closing and locking the doors and trunk

112

switch modes are changed.

wash the vehicle:

ꢀ Place the electronic key in a location 2

m (6 ft.) or more away from the vehi-

cle. (Take care to ensure that the key

is not stolen.)

ꢀ Set the electronic key to battery-sav-

ing mode to disable the smart entry &

start system. (P.111)

●

Do not leave the electronic key on top

of the instrument panel or near the

door pockets when exiting the vehicle.

Depending on the radio wave recep-

tion conditions, it may be detected by

the antenna outside the cabin and the

doors will become lockable from the

outside, possibly trapping the elec-

tronic key inside the vehicle.

●

If the electronic key is inside the vehi-

cle and a door handle becomes wet

during a car wash, a message may be

shown on the multi-information dis-

play and a buzzer will sound outside

the vehicle. To turn off the alarm, lock

both side doors.

●

As long as the electronic key is within

the effective range, the doors may be

locked or unlocked by anyone. How-

ever, only the doors detecting the

electronic key can be used to unlock

the vehicle.

●

The lock sensor may not work prop-

erly if it comes into contact with ice,

snow, mud, etc. Clean the lock sensor

and attempt to operate it again.

●

Even if the electronic key is not inside

the vehicle, it may be possible to start

the engine if the electronic key is near

the window.

A sudden handle operation or a han-

dle operation immediately after enter-

ing the effective range may prevent

the doors from being unlocked. Touch

the door unlock sensor and check that

the doors are unlocked before pulling

the door handle again.

The doors may unlock or lock if a

large amount of water splashes on the

door handle, such as in the rain or in a

car wash, when the electronic key is

within the effective range. (The doors

will automatically be locked after

approximately 30 seconds if the doors

are not opened and closed.)

●

Unlocking the vehicle may take more

time if another electronic key is within

the effective range.

●

If the wireless remote control is used

to lock the doors when the electronic

key is near the vehicle, there is a pos-

sibility that the door may not be

unlocked by the entry function. (Use

the wireless remote control to unlock

the doors.)

■

●

When the vehicle is not driven for

extended periods

To prevent theft of the vehicle, do not

leave the electronic key within 2 m (6

ft.) of the vehicle.

●

The smart entry & start system can be

deactivated in advance. (P.113)

●

Touching the door lock or unlock sen-

sor while wearing gloves may prevent

lock or unlock operation.

Setting the electronic key to bat-

tery-saving mode helps to reduce key

battery depletion. (P.111)

Vehicles without a double locking sys-

tem: When the lock operation is per-

formed using the lock sensor,

recognition signals will be shown up to

three consecutive times. After this, no

recognition signals will be given.

■

●

To operate the system properly

Make sure to carry the electronic key

when operating the system. Do not

get the electronic key too close to the

vehicle when operating the system

from the outside of the vehicle.

●

If the door handle becomes wet while

the electronic key is within the effec-

tive range, the door may lock and

unlock repeatedly. In this case, follow

the following correction procedures to

Depending on the position and holding

condition of the electronic key, the key

may not be detected correctly and the

3-2. Opening, closing and locking the doors and trunk

113

system may not operate properly. (The

WARNING

alarm may go off accidentally, or the

door lock prevention function may not

operate.)

■

●

Caution regarding interference

with electronic devices

●

Do not leave the electronic key inside

the trunk.

People with implantable cardiac

pacemakers, cardiac

The key confinement prevention func-

tion may not operate, depending on

the location of the key (the inside

edge of the Trunk), conditions (inside

a metal bag, close to metallic objects)

and the radio waves in the surround-

ing area. (P.109)

resynchronization therapy-pace-

makers or implantable cardioverter

defibrillators should maintain a rea-

sonable distance between them-

selves and the smart entry & start

system antennas. (P.110)

The radio waves may affect the

operation of such devices. If neces-

sary, the entry function can be disa-

bled. Ask any authorized Toyota

retailer or Toyota authorized

repairer, or any reliable repairer for

details, such as the frequency of

radio waves and timing of the emit-

ted radio waves. Then, consult your

doctor to see if you should disable

the entry function.

■

●

If the smart entry & start system

does not operate properly

Locking and unlocking the doors:

P.357

3

●

■

Starting the engine: P.358

Customization

Some functions can be customized.

(P.377)

■

●

If the smart entry & start system

has been disabled

●

Users of any electrical medical

device other than implantable car-

diac pacemakers, cardiac

Locking and unlocking the doors:

Use the wireless remote control or

mechanical key. (P.103, 357)

resynchronization therapy-pace-

makers or implantable cardioverter

defibrillators should consult the

manufacturer of the device for infor-

mation about its operation under

the influence of radio waves.

Radio waves could have unex-

pected effects on the operation of

such medical devices.

●

Starting the engine and changing

engine switch modes: P.358

Stopping the engine: P.141

The smart entry & start system can be

disabled. (P.113)

When to disable the smart

entry & start system

In the following situations, the

smart entry & start system should

be disabled.

 When people with implantable

cardiac pacemakers, cardiac

resynchronization therapy pace-

3-2. Opening, closing and locking the doors and trunk

114

makers or implantable

cardioverter defibrillators ride in

the vehicle.

5 Within 10 seconds of performing

step 4, close and open the

driver’s door 2 times.

 When the vehicle will not be

used for a long time, or the smart

entry & start system is not used.

6 Within 10 seconds of performing

step 5, press

of the door

lock switch 2 times with the door

 When storing an electronic key

near or inside the vehicle cannot

be avoided.

open.

7 Within 10 seconds of performing

step 6, close and open the

driver’s door 1 time.

When the smart entry & start sys-

tem is disabled, use the wireless

remote control to lock and unlock

the doors.

8 Within 5 seconds of performing

step 7, close the driver’s door.

A buzzer will sound for approximately 2

seconds and the smart entry & start

system will be disabled.

When starting the engine, it will be

necessary to hold the electronic

key near the engine switch.

(P.358)



Wireless remote control method

1 Open the driver’s door and push

the lock lever forward.

■

Disabling the smart entry &

start system

The smart entry & start system can

be disabled by opening and closing

the doors or using the wireless

remote control.



Door opening/closing method

1 While sitting in the driver’s seat,

close the door.

2 Press and hold

and

of

2 Press

of the door lock

the wireless remote control at

the same time for 5 seconds or

more.

switch.

3 Within 5 seconds of performing

step 2, open the driver’s door.

A buzzer will sound for approximately 2

seconds and the smart entry & start

system will be disabled.

4 Within 5 seconds of performing

step 3, press

lock switch 2 times with the door

open.

of the door

■

Enabling the smart entry &

start system

The smart entry & start system can

be enabled by performing the pro-

3-2. Opening, closing and locking the doors and trunk

115

cedure used to disable it again.

When enabled a buzzer will sound.

Unlocking the doors using

PIN code smart entry

By registering a 5 digit PIN code, all

of the doors and the fuel filler door

can be unlocked without an elec-

tronic key by pressing the trunk

opener switch.

■

Door opening/closing method

Make sure to firmly press the door lock

switch in steps 4 and 6. If the switch is

pressed for a very short time, the sys-

tem may not be disabled.

■

Wireless remote control method

■

PIN code registration method

To use the wireless remote control

method to disable the smart entry & start

system, it is necessary to register a PIN

code for the PIN code smart entry.

(P.115)

1 Turn the engine switch off.

2 Close all of the doors and the

trunk.

3

■

When enabling the smart entry &

start system

3 Press and hold

of the wire-

If the method used to disable the smart

entry & start system is unknown, press

the engine switch.

less remote control.

At this time, all of the doors and the fuel

filler door will lock.

●

If the wireless remote control system

was used, a buzzer inside the vehicle

will sound.

4 Within 5 seconds of performing

step 3, press and hold the trunk

opener switch.

●

■

If the door opening/closing method

was used, the buzzer will not sound.

After 5 seconds or more, a buzzer will

sound.

Customization

Some functions can be customized.

(P.377)

5 Release

of the wireless

remote control and the trunk

NOTICE

opener switch.

■

When disabling the smart entry &

start system

6 Within 30 seconds after the

buzzer begins sounding, press

When disabling or enabling the sys-

tem to accommodate persons with

implantable cardiac pacemakers, car-

diac resynchronization therapy pace-

makers or implantable cardioverter

defibrillators, always use the door

opening/closing method. If the wire-

less remote control method is used,

the system may be enabled acciden-

tally.

of the wireless remote con-

trol.

The buzzer will stop.

7 A PIN code can now be regis-

tered. Press the trunk opener

switch the same number of

times as the first digit of the PIN

code.

For example: If registering 32468,

press the switch 3 times.

3-2. Opening, closing and locking the doors and trunk

116

been disabled using the wireless

8 Wait for the buzzer to sound 1

time and then press the switch

the same number of times as for

the next digit.

remote control method, the PIN code

for the PIN code smart entry cannot

be cleared. (P.114)

●

In the following cases, perform the

PIN code registration procedure

again.

ꢀ If the PIN code has been forgotten.

ꢀ When you wish to change the PIN

code.

For example: If registering 32468,

press the switch 2 times.

9 Repeat step 8 for the remaining

digits.

●

Make sure to change the PIN code

periodically.

10Within 30 seconds after the

buzzer begins sounding inter-

mittently, perform steps 7

through 9 again to confirm the

PIN code.

●

If the vehicle has been loaned to

another person, make sure that the

PIN code has not been changed or

cleared. If the PIN code has been

changed or cleared, perform PIN code

registration again.

Registration is complete and all of the

doors and the fuel filler door will unlock.

■

●

Unlocking method

■

Unlocking method

If an electronic key is within a detec-

tion area, operation of the smart entry

will be given priority.

Press the trunk opener switch using

the same procedure as steps 7

through 9.

●

If a mistake is made while entering the

PIN code, wait 5 seconds or more

before performing the procedure

again.

■

●

PIN code registration

If the incorrect PIN code is entered 5

times consecutively, a buzzer will

sound for approximately 2 seconds

and operation will not be possible for 5

minutes.

To prevent theft, the same digit for all

5 digits and 12345 cannot be regis-

tered as the PIN code. Also, avoid

using the same number as on your

license plate or other simple codes.

●

To use 0 as a digit, press the trunk

opener switch 10 times.

If a mistake is made during registra-

tion, unlock the doors or trunk using

the wireless remote control to cancel

registration. Then perform registra-

tion again, starting from step 1. How-

ever, if the mistake was made in step

10, a buzzer will sound and step 10

can be performed again.

●

To clear the PIN code, perform the

registration procedure and enter

22222.

After registering a new PIN code,

make sure to check that the doors can

be unlocked using the code.

If the smart entry & start system has

Before driving -> Opening, closing and locking the doors and trunk for Your Toyota 86 2 Door Second Generation (2022-2025)

Related Topics

Before driving

Popular Owner Manuals

Latest Owner Manuals