Get Vehicle specifications -> Specifications Guide for Toyota 86 2 Door Second Generation (2022-2025)

8-1. Specifications

368

8-1.Specifications

Maintenance data (fuel, oil level, etc.)

Dimensions and weights

Overall length

Overall width

4265 mm (167.9 in.)

1775 mm (69.9 in.)

1310 mm (51.6 in.)

2575 mm (101.4 in.)

1520 mm (59.8 in.)

1550 mm (61.0 in.)

Overall height^*

Wheelbase

Front

Rear

Tread

Details are described on the tire

and loading information label.

(P.368)

Gross vehicle mass

Front

Rear

876 kg (1931 lb.)

943 kg (2079 lb.)

Maximum permissible axle

capacity

^*: Unladen vehicle

Vehicle identification

■

Vehicle identification number

The vehicle identification number

(VIN) is the legal identifier for your

vehicle. This is the primary identifi-

cation number for your Toyota. It is

used in registering the ownership of

your vehicle.

This number is stamped under the

right-hand front seat.

This number is located on the top

left of the body panel.

8-1. Specifications

Engine number

369

■

The engine number is stamped on

the engine block as shown.

This number is also on the manu-

facturer’s label.

Engine

Model

Type

FA24

Horizontally opposed, liquid cooled 4 cyl-

inder, 4-stroke gasoline

8

Bore and stroke

Displacement

94.0  86.0 mm (3.70  3.39 in.)

2387 cm³(146 cu. in.)

Automatic adjustment

Drive belt tension

8-1. Specifications

370

Fuel

When you find these types of fuel label at

the gas station, use only the fuel with one

of the following labels.

Fuel type

EU area: Unleaded gasoline conforming

to European standard EN228 only

Except EU area: Unleaded gasoline only

98 or higher^*

Research Octane Number

Fuel tank capacity (Reference)

50 L (13.2 gal., 11.0 Imp. gal.)

^*: If unleaded gasoline with a Research Octane Number of 98 is not available,

unleaded gasoline with a Research Octane Number of 95 may be used with no

detriment to engine durability or driveability.

Lubrication system

*

■

Oil capacity (Drain and refill [Reference ])

With filter

5.0 L (5.3 qt., 4.4 Imp. qt.)

4.8 L (5.1 qt., 4.2 Imp. qt.)

Without filter

^*: The engine oil capacity is a reference quantity to be used when changing the

engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check

the oil level on the dipstick.

■

Engine oil selection

“Resource-Conserving” or SN

PLUS “Resource-Conserving”; or

ILSAC GF-5 multigrade engine oil

“Toyota Genuine Motor Oil” is used

in your Toyota vehicle. Use Toyota

approved “Toyota Genuine Motor

Oil” or equivalent to satisfy the fol-

lowing grade and viscosity.

Recommended viscosity (SAE):

SAE 0W-20 is filled into your Toyota

vehicle at manufacturing, and the

best choice for good fuel economy

and good starting in cold weather.

Oil grade:

0W-20, 5W-20 and 5W-30:

If SAE 0W-20 is not available, SAE

5W-20 oil may be used. However, it

must be replaced with SAE 0W-20

API grade SL “Energy-Conserving”,

SM “Energy-Conserving”, SN

8-1. Specifications

371

at the next oil change.

API Service Symbol

A

Top portion: “API SERVICE SN” means

the oil quality designation by American

Petroleum Institute (API).

Center portion: “SAE 0W-20” means

the SAE viscosity grade.

Lower portion: “Resource-Conserving”

means that the oil has fuel-saving and

environmental protection capabilities.

Temperature range anticipated

before next oil change

A

Preferred

Oil viscosity (0W-20 is explained

here as an example):

ꢀ The 0W in 0W-20 indicates the

characteristic of the oil which

allows cold startability. Oils with a

lower value before the W allow

for easier starting of the engine

in cold weather.

ILSAC Certification Mark

The International Lubricant Specifica-

tion Advisory Committee (ILSAC) Certi-

fication Mark is displayed on the front of

the container.

ꢀ The 20 in 0W-20 indicates the

viscosity characteristic of the oil

when the oil is at high tempera-

ture. An oil with a higher viscos-

ity (one with a higher value) may

be better suited if the vehicle is

operated at high speeds, or

under extreme load conditions.

8

How to read oil container labels:

Either or both API registered marks

are added to some oil containers to

help you select the oil you should

use.

8-1. Specifications

372

Cooling system



Vehicles with an automatic transmission

7.7 L (8.1 qt., 6.8 Imp. qt.)

Vehicles with a manual transmission

Capacity



7.4 L (7.8 qt., 6.5 Imp. qt.)

Use either of the following.

 “TOYOTA Genuine 50/50 Pre-mixed Super Long Life

Coolant BLUE”

 Similar high-quality ethylene glycol-based non-sili-

cate, non-amine, non-nitrite, and non-borate coolant

with long-life hybrid organic acid technology

Coolant type

Do not use plain water alone.

Ignition system (spark plug)

Make

Gap

DENSO ZXE27HBR8

0.8 mm (0.031 in.)

NOTICE

Iridium-tipped spark plugs

■

Use only iridium-tipped spark plugs. Do not adjust gap when tuning engine.

Electrical system

Battery

1.2501.290 Fully charged

Specific gravity reading at 20°C

1.1601.200 Half charged

(68°F):

1.0601.100 Discharged

Charging rates

Quick charge

Slow charge

15 A max.

5 A max.

8-1. Specifications

373

Differential

Oil capacity (Reference)

1.15 L (1.22 qt., 1.01 Imp. qt.)

 Toyota Genuine Differential Gear Oil LX

Oil type and viscosity^*

 Other LSD gear oil that meets API GL-5 and

SAE 75W-85

^*: Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil LX” at the

factory. Use Toyota approved “Toyota Genuine Differential Gear Oil LX” or an

equivalent of matching quality to satisfy the above specification. Please contact

any authorized Toyota dealer or repairer, or another duly qualified and equipped

professional for further details.

NOTICE

■

Differential gear oil type

Using a differential gear oil other than “Toyota Genuine Differential Gear Oil LX”

may cause occurrences of noises, vibrations and poor fuel consumption. Never

use different brands together.

Automatic transmission

Fluid capacity^*

7.5 L (7.9 qt., 6.6 Imp. qt.)

Fluid type

Toyota Genuine ATF WS

^*: The fluid capacity is provided as a reference.

If replacement is necessary, contact any authorized Toyota dealer or repairer, or

another duly qualified and equipped professional.

NOTICE

8

■

Transmission fluid type

Using automatic transmission fluid other than “TOYOTA Genuine ATF WS” may

cause deterioration in shift quality, locking up of your transmission accompanied

by vibration, and ultimately damage the automatic transmission of your vehicle.

Manual transmission

Fluid capacity^*

2.2 L (2.3 qt., 1.9 Imp. qt.)

Use either of the following:

 “MT GEAR OIL LV 75W”

Fluid type

 Other gear oil that meets API GL-4^*and SAE

75W specifications

8-1. Specifications

374

^*: The recommended oil grade is API GL-4. However, API GL-3 can also be used.

NOTICE

■

Transmission fluid type

If oil other than “MT GEAR OIL LV 75W” is used, the following may be experi-

enced:

●

The overall performance and function of the transmission may be adversely

affected.

●

Rattling noises may occur during idling and fuel consumption may increase.

Never use different brands together.

Clutch



Left-hand drive vehicles

4.316.4 mm (0.170.65 in.)

Right-hand drive vehicles

Pedal free play



4.115.7 mm (0.160.62 in.)

Fluid type

SAE J1703 or FMVSS No.116 DOT 3

Brakes

Pedal clearance^*1

Pedal free play

74 mm (2.91 in.) Min.

0.51.5 mm (0.0200.059 in.)

7 - 8 clicks

Parking brake lever travel^*2

SAE J1703 or FMVSS No.116 DOT 3 or SAE

J1704 or FMVSS No.116 DOT 4

Fluid type

^*1: Minimum pedal clearance when depressed with a force of 300 N (30 kgf, 67 lbf)

while the engine is running.

Carpet

A

Brake pedal

Pedal clearance

C

8-1. Specifications

375

^*2: Parking brake lever travel when pulled up with a force of 200 N (20.4 kgf, 45.0

lbf).

Steering

Free play

Less than 30 mm (1.2 in.)

Tires and wheels



17-inch tires

Tire size

215/45R17 87W

Tire inflation pressure (Recom-

mended cold tire inflation pressure)

240 kPa (2.4 kgf/cm²or bar, 35 psi)

Wheel size

17  7 1/2 J

Wheel nut torque

120 Nꢀm (12.2 kgfꢀm, 89 ftꢀlbf)



18-inch tires

Tire size

215/40R18 85Y

Tire inflation pressure (Recom-

mended cold tire inflation pressure)

240 kPa (2.4 kgf/cm²or bar, 35 psi)

Wheel size

18  7 1/2 J

Wheel nut torque

120 Nꢀm (12.2 kgfꢀm, 89 ftꢀlbf)

Light bulbs

8

Light bulbs

W

16

21

2

Type

A

Back-up lights

Exterior

Rear fog lights

A

Vanity lights (if equipped)

B

Interior light

Interior

8

A

Door courtesy lights (if equipped)

5

A

Trunk light

3.8

A

A: Wedge base bulbs (clear)

B: Double end bulbs

8-1. Specifications

376

and there is no need for concern.

NOTICE

Fuel information

When you find these types of

fuel label at the gas station,

use only the fuel with one of

the following labels.

■

Notice on fuel quality

●

Do not use improper fuels. If

improper fuels are used, the engine

will be damaged.

●

Do not use gasoline with metallic

additives, for example manganese,

iron or lead, otherwise it may cause

damage on your engine or emission

control system.

EU area:

●

Do not add aftermarket fuel addi-

tives which contain metallic addi-

tives.

You must only use unleaded

gasoline conforming to Euro-

pean standard EN228.

Select unleaded gasoline with

a Research Octane Number of

95 or higher for optimum

engine performance.

EU area: Bioethanol fuel sold under

names such as “E50” or “E85” and

fuel containing a large amount of

ethanol should not be used. The

use of these fuels will damage the

vehicle’s fuel system. In case of any

doubt, ask any authorized Toyota

retailer or Toyota authorized

Except EU area:

repairer, or any reliable repairer.

You must only use unleaded

gasoline.

●

Except EU area: Bioethanol fuel

sold under names such as “E50” or

“E85” and fuel containing a large

amount of ethanol should not be

used. Your vehicle can use gasoline

mixed with 10% max ethanol. The

use of fuel with more than 10% eth-

anol content (E10) will damage the

vehicle’s fuel system. You must

ensure that refueling is carried out

only from a source where fuel spec-

ification and quality can be guaran-

teed. In case of any doubt, ask any

authorized Toyota retailer or Toyota

authorized repairer, or any reliable

repairer.

Select unleaded gasoline with

a Research Octane Number of

95 or higher for optimum

engine performance.

■

Use of ethanol blended gasoline in

a gasoline engine

Toyota allows the use of ethanol

blended gasoline where the ethanol

content is up to 10%. Make sure that the

ethanol blended gasoline to be used has

a Research Octane Number that follows

the above.

●

Do not use the methanol blended

gasoline such as M15, M85, M100.

The use of gasoline containing

methanol may cause engine dam-

age or failure.

■

●

If your engine knocks

Consult any authorized Toyota retailer

or Toyota authorized repairer, or any

reliable repairer.

●

You may occasionally notice light

knocking for a short time while accel-

erating or driving uphill. This is normal

Vehicle specifications -> Specifications for Your Toyota 86 2 Door Second Generation (2022-2025)

Related Topics

Vehicle specifications

Popular Owner Manuals

Latest Owner Manuals