Get Vehicle status information and indicators Guide for Toyota 86 2 Door Second Generation (2022-2025)

83

Vehicle status information

and indicators

2

.

2-1. Instrument cluster

Warning lights and indicators

.........................................84

Gauges and meters............88

Multi-information display.....92

2

2-1. Instrument cluster

84

2-1.Instrument cluster

Warning lights and indicators

The warning lights and indicators on the instrument cluster and

overhead console inform the driver of the status of the vehicle’s var-

ious systems.

Warning lights and indicators displayed on the instrument

cluster

For the purpose of explanation, the following illustrations display all warning

lights and indicators illuminated.

Charging system warning

light^*1(P.337)

Warning lights

Warning lights inform the driver of

malfunctions in the indicated vehi-

cle systems.

Low engine oil pressure

warning light^*1(P.337)

Malfunction indicator lamp^*1

(P.337)

SRS warning light^*1(P.53,

Brake system warning light^*1

(P.336)

P.337)

(red)

ABS warning light^*1(P.338)

Vacuum pressure system

warning light^*1(P.336)

(yellow)

Electric power steering sys-

tem warning light^*1(P.338)

High coolant temperature

warning light^*1(P.336)

Slip indicator^*1(P.338)

(red)

2-1. Instrument cluster

85

or turn off. Have the vehicle

Automatic transmission fluid

temperature warning light (if

equipped) (P.339)

Open door warning light

(P.339)

Low fuel level warning light^*1

(P.339)

inspected by any authorized Toyota

retailer or Toyota authorized repairer,

or any reliable repairer.

^*2: The front passenger’s seat belt

reminder light is located on the over-

head console.

^*3: This light illuminates on the over-

head console.

Driver’s and front passen-

ger’s seat belt reminder

light^{*1, 2}(P.339)

Rear passengers’ seat belt

WARNING

2

reminder lights^{*1, 3}(P.340)

■

If a safety system warning light

does not come on

Conventional Cruise Control

indicator (if equipped)

(P.340)

Should a safety system light such as

the ABS and SRS warning light not

come on when you start the engine,

this could mean that these systems

are not available to help protect you in

an accident, which could result in

death or serious injury. Have the vehi-

cle inspected by your Toyota dealer

immediately if this occurs.

(yellow)

BSD/RCTA warning light (if

equipped) (P.340)

SRH warning light (if

equipped) (P.340)

RAB warning light (if

equipped) (P.341)

Indicators

LED headlight warning light

(P.341)

The indicators inform the driver of

the operating state of the vehicle’s

various systems.

Automatic headlight leveling

system warning light

(P.341)

Master warning light^*1

Turn signal indicator

(P.341)

(P.150)

EyeSight warning light (if

equipped) (P.341)

Tail light indicator (P.153)

Tire pressure warning light^*1

Headlight high beam indica-

(P.342)

tor (P.154)

GPF system warning light

(P.342)

High beam assist indicator (if

equipped) (P.156)

^*1: These lights turn on when the engine

switch is turned to ON to indicate

that a system check is being per-

formed. They will turn off after the

engine is started, or after a few sec-

onds. There may be a malfunction in

a system if a light does not come on,

Rear fog light indicator

(P.159)

EyeSight temporary stop indi-

cator (if equipped) (P.223)

2-1. Instrument cluster

86

Pre-Collision Braking Sys-

Smart entry & start system

tem OFF indicator^{*1, 2}(if

indicator^*3(P.139)

equipped) (P.183)

Hill-start assist control ON

indicator (P.253)

Conventional Cruise Control

indicator (if equipped)

Security indicator (P.79,

(white/gre

81)

(P.202, 249)

en)

Low coolant temperature

indicator^*4

Adaptive Cruise Control indi-

cator (if equipped) (P.191)

(blue)

(white/gre

en)

Gear Shift indicator (P.145,

149)

“READY” indicator (if

equipped) (P.191)

Passenger’s frontal

airbag ON and OFF

Lead vehicle indicator (if

equipped) (P.191)

Lead vehicle indicator^*3(if

equipped) (P.191)

indicator^{*1, 5}(P.32)

Low outside temperature

indicator^*6(P.88)

 Drive mode indicators

Your vehicle indicator (if



Normal mode

equipped) (P.191)

Following distance setting

indicator (if equipped)

(P.191)

Following distance setting

indicator^*3(if equipped)

Snow mode indicator (if

equipped) (P.252)

“SPORT” indicator (if

equipped) (P.252)



TRACK mode

(P.191)

Lane Departure Warning

OFF indicator^{*1, 2}(if

equipped) (P.215)

BSD/RCTA OFF indicator^*2

(if equipped) (P.229)

SRH OFF indicator^*2(if

equipped) (P.156)

Snow mode indicator (if

equipped) (P.252)

SN

OW

“SPORT” indicator (if

equipped) (P.252)

SPORT

“TRACK” indicator

(P.257)

^*1: These lights turn on when the engine

switch is turned to ON to indicate

that a system check is being per-

formed. They will turn off after the

engine is started, or after a few sec-

onds. There may be a malfunction in

a system if a light does not come on,

or turn off. Have the vehicle

RAB OFF indicator^{*1, 2}(if

equipped) (P.241)

Slip indicator^*1(P.256)

(flashes)

VSC OFF indicator^{*1, 2}

(P.257)

TRC OFF indicator^{*1, 2}

(P.256)

inspected by any authorized Toyota

retailer or Toyota authorized repairer,

2-1. Instrument cluster

87

or any reliable repairer.

^*2: The light comes on when the system

is turned off.

^*3: This light illuminates on the

multi-information display.

^*4: This indicator turns on when the

engine coolant temperature is low.

^*5: This light illuminates on the over-

head console.

^*6: When the outside temperature is

approximately 3°C (37°F) or lower,

this indicator will illuminate.

2

2-1. Instrument cluster

Gauges and meters

Meter display

88

■

Locations of gauges and meters



Normal mode

Multi-information display

A

Presents the driver with a variety of vehicle data (P.92)

Displays warning messages in case of a malfunction (P.344)

Tachometer

Displays the engine speed in revolutions per minute

The red zone will be lower than normal, when the engine is cold

Outside temperature

C

Displays the outside temperature within the range of -40°C (-40°F) to 50°C (122°F).

Low outside temperature indicator comes on when the ambient temperature is 3°C

(37°F) or lower.

Clock

D

Engine coolant temperature gauge

Displays the engine coolant temperature

Fuel gauge

Speedometer

Shift position and gear position (P.143, 148)

Odometer and trip meter display (P.90)

2-1. Instrument cluster

89



TRACK mode

2

Multi-information display

A

Presents the driver with a variety of vehicle data (P.92)

Displays warning messages in case of a malfunction (P.344)

Tachometer

Displays the engine speed in revolutions per minute

The red zone will be lower than normal, when the engine is cold

Outside temperature

C

Displays the outside temperature within the range of -40°C (-40°F) to 50°C (122°F).

Low outside temperature indicator comes on when the ambient temperature is 3°C

(37°F) or lower.

Clock

D

Engine coolant temperature gauge

Displays the engine coolant temperature

Fuel gauge

Speedometer

Shift position and gear position (P.143, 148)

Odometer and trip meter display (P.90)

■

REV indicator

If the engine speed enters the red

zone, the shift position and shift

range indicator will illuminate in red

and a buzzer will sound.

When the engine speed reaches a

set speed, the shift position and

shift range indicator will illuminate

in orange and a buzzer will sound.

The default setting for the REV indica-

2-1. Instrument cluster

90

tor is disabled. The setting can be ena-

bled/disabled on of the

WARNING

■

The information display at low

temperatures

multi-information display. (P.377)

Allow the interior of the vehicle to

warm up before using the liquid crys-

tal information display. At extremely

low temperatures, the information dis-

play monitor may respond slowly, and

display changes may be delayed.

For example, there is a lag between

the driver’s shifting and the new gear

number appearing on the display.

This lag could cause the driver to

downshift again, causing rapid and

excessive engine braking and possi-

bly an accident resulting in death or

injury.

The engine speed at which the REV

indicator is displayed can be changed

on

of the multi-information display.

(P.377)

NOTICE

■

●

To prevent damage to the engine

and its components

■

●

Outside temperature display

In the following situations, the correct

outside temperature may not be dis-

played, or the display may take longer

than normal to change:

Do not let the indicator needle of

the tachometer enter the red zone,

which indicates the maximum

engine speed.

ꢀ When stopped, or driving at low

speeds (less than 20 km/h [12 mph])

ꢀ When the outside temperature has

changed suddenly (at the

●

Pay extra attention to the engine

speed when the engine is cold, as

the red zone will be lower than nor-

mal.

entrance/exit of a garage, tunnel, etc.)

●

When “--” is displayed, the system

may be malfunctioning.

Take your vehicle to any authorized

Toyota retailer or Toyota authorized

repairer, or any reliable repairer.

If the engine coolant temperature

gauge indicator is flashing, the

engine may be overheating. Imme-

diately stop the vehicle in a safe

place, and check the engine after it

has cooled completely. (P.362)

■

Liquid crystal display

P.93

■

Customization

Odometer and trip meter

display

The meter display can be customized on

the multi-information display. (P.377)

■

Changing the display

Press the display change button

until the desired item is displayed.

2-1. Instrument cluster

91

1 Brighter

2 Darker

■

Instrument panel light brightness

adjustment

When the headlights or front position

lights are turned on, the meter and

instrument panel lights will be dimmed.

However, if the instrument panel bright-

ness dial is set to the highest position,

the lights will not dim even if the head-

lights or front position are turned on.

■

Display items

2

 Odometer

■

Auto dimmer cancel

Displays the total distance the vehicle

has been driven.

When the surrounding area is bright,

such as during the day, or if the lights

are turned on before necessary, the

automatic dimming function will be can-

celled. In this case, the brightness can-

not be adjusted, even if the instrument

panel brightness dial is turned.

 Trip meter A/Trip meter B

Displays the distance the vehicle has

been driven since the meter was last

reset. Trip meters A and B can be used

to record and display different distances

independently.

■

Customization

Some functions can be customized.

(P.377)

To reset, display the desired trip meter

and press and hold the display change

button.

Adjusting the clock

The clocks can be adjusted on the

multimedia system screen.

Changing the instrument

panel light brightness

■

Setting the clock to be

adjusted automatically

When the headlights or front posi-

tion lights are on, the brightness of

the meter and instrument panel

lights can be adjusted using the

instrument panel brightness dial.

1 Press

2 Select

.

3 Select “General”.

4 Select “Clock”.

5 Select “Time Setting”.

6 Select “Sync With Phone”.

The clock will be set and adjusted

automatically when a smartphone

®

is connected via Bluetooth for

transferring phonebook data. For

2-1. Instrument cluster

92

details, refer to the “Multimedia

owner's manual”.

Multi-information display

■

Adjusting the clock manually

The multi-information display

presents the driver with a vari-

ety of vehicle data.

1 Press

2 Select

.

3 Select “General”.

4 Select “Clock”.

Displays and menu icons

■

Display

5 Select “Time Setting”.



Normal display

6 Select “Manual” then adjust the

By selecting menu icons on the

multi-information display, a variety

of driving-related information can

be displayed. The multi-information

display can also be used to change

display settings and other vehicle

settings.

clock.

7 Select “OK”.

■

Changing the clock between

12H/24H format

1 Press

2 Select

.

Warning or advice pop-up displays

are also displayed in certain situa-

tions.

.

3 Select “General”.

4 Select “Clock”.

5 Select “12H” or “24H”.

■

Clock settings screen

The clock setting screen can also be

displayed by touching the clock on the

status bar.



TRACK mode display

Vehicles without EyeSight:

When in TRACK mode, the TRACK

mode display will remain displayed.

Vehicles with EyeSight:

When in TRACK mode, the

Pre-Collision Braking System will

be turned off and the TRACK mode

display will remain displayed.

2-1. Instrument cluster

93

(P.183)

Settings display (P.98)

Warning or advice pop-up displays

are also displayed in certain situa-

tions.

Warning message display

(P.344)

^*: Displayed when the navigation sys-

tem of Apple CarPlay or Android Auto

is operating. For details, refer to the

“Multimedia owner's manual”.

■

Liquid crystal display

2

Small spots or light spots may appear

on the display. This phenomenon is

characteristic of liquid crystal displays,

and there is no problem continuing to

use the display.

Engine coolant temperature

A

(P.88)

WARNING

Engine oil temperature

■

The multi-information display at

low temperatures

Displays the engine oil temperature.

Allow the interior of the vehicle to

warm up before using the liquid crys-

tal information display. At extremely

low temperatures, the information dis-

play monitor may respond slowly, and

display changes may be delayed.

Fastest lap time

C

Refer to P.97 for the operating method.

Current lap time

D

Refer to P.97 for the operating method.

For example, there is a lag between

the driver’s shifting and the new gear

number appearing on the display.

This lag could cause the driver to

downshift again, causing rapid and

excessive engine braking and possi-

bly an accident resulting in death or

injury.

■

Menu icons

Select a menu icon to display its

content.

Driving information (P.94)

Sport information (P.95)

Changing the meter display

Navigation system-linked dis-

play^*(P.97)

The multi-information display is

operated using the meter control

switches.

Audio system-linked display

(P.97)

Driving support system infor-

mation display (if equipped)

(P.98)

Driving support system set-

ting display (P.98)

For information pertaining to the

content of each menu icon, refer to

the explanation of each item under

the heading of the relevant menu

icon.

2-1. Instrument cluster

94

Voltmeter

A

/

: Select menu icons

A

Displays the charging voltage.

/

: Change displayed con-

As voltage displayed may be different

from the actual battery voltage, use the

voltmeter as a guideline.

tent, scroll up/down the screen

and move the cursor

Press: Enter

Press and hold: Reset/change

scale of the G-force display

Engine oil temperature gauge

Displays the engine oil temperature.

■

Driving information (page 2)

Return to the previous screen

C

Use the display as a reference.

Content of driving informa-

tion

■

Display items

Press or of the meter con-

trol switch and select . Then

press or to display the fol-

lowing items:

Current fuel consumption

A

 Driving information (page 1)

 Driving information (page 2)

 Driving information (page 3)

 Driving information (page 4)

Displays the current rate of fuel con-

sumption.

Average fuel consumption

Displays the average fuel consumption

since the function was reset.

■

Driving information (page 1)

Driving range

C

Use the display as a reference.

Displays the estimated maximum dis-

tance that can be driven with the quan-

tity of fuel remaining.

This distance is computed based on

2-1. Instrument cluster

95

your average fuel consumption. As a

result, the actual distance that can be

driven may differ from that displayed.

Sport information

■

Display items

Press or of the meter con-

trol switch and select . Then

press or to display the fol-

When only a small amount of fuel is

added to the tank, the display may not

be updated. When refueling, turn the

engine switch off. If the vehicle is

refueled without turning the engine

switch off, the display may not be

updated.

lowing items:

 G-force

2

■

Driving information (page 3)

Suitable for confirming current lateral

G-forces on the vehicle.

Use the display as a reference.

 G-force (peak hold function)

Suitable for confirming the size and

direction of the maximum lateral

G-forces on the vehicle.

 Power and torque curve

 Stopwatch

■

G-force

Displays lateral G-forces on the

vehicle.

Average vehicle speed

A

Displays the average vehicle speed

since display was reset.

Also displays, around the periph-

ery of the G-force display, the left

and right steering amount, acceler-

ator pedal input, and brake fluid

pressure.

Driving time

Displays the cumulative time the vehi-

cle has been driven since display was

reset.

This display is intended for use as a

guideline. Depending on factors

such as the road surface condition,

temperature and vehicle speed, the

display may not show the actual

condition of the vehicle.

Driving distance

C

Displays the cumulative distance the

vehicle has been driven since display

was reset.

Pressing and holding

will reset

the average vehicle speed/driving

time/driving distance.

■

Driving information (page 4)

Displays each tire pressure.

(P.303)

2-1. Instrument cluster

96

Acceleration G-force on the

vehicle

Record of the maximum

G-forces

A

Accelerator pedal input

Brake fluid pressure

Steering amount

Press and hold

to reset the record

of maximum G-forces.

C

D

Acceleration G-force on the

vehicle

Press and hold

to change the

Accelerator pedal input

C

range of the acceleration G-force

display between 1.0 G and 0.5 G.

Brake fluid pressure

D

Steering amount

■

G-force (peak hold function)

■

Power and torque curve

Displays lateral G-forces on the

vehicle.

This chart is intended for reference

only and does not show the actual

engine torque or output.

Also displays, around the periph-

ery of the G-force display, the left

and right steering amount, acceler-

ator pedal input, and brake fluid

pressure.

This display is intended for use as a

guideline. Depending on factors

such as the road surface condition,

temperature and vehicle speed, the

display may not show the actual

condition of the vehicle.

Power output

A

Torque

Current engine speed

C

The vertical bar will slide laterally

according to the current engine speed.

2-1. Instrument cluster

97

To change to the measurement screen:

■

Stopwatch

Press

.

Measures and displays current lap

time and previous lap times.

To change to the top screen: Press

.



Top screen

 Operating the measurement

screen

: Start/stop measurement

: Mark off one lap

2

: Reset measured lap times

: Scroll through the lap times

 Resetting measured lap times

After stopping the measurement, press

.

Fastest lap time (top screen)

A

When the timer is reset, “- -’- -”- -” will

be displayed.

 To display other content while



Measurement screen

the stopwatch is operating

If the measurement screen is dis-

played, press

screen.

to display the top

Then operate the meter control

switches to display other content. While

other items are displayed, the measure-

ment will continue but the stopwatch

cannot be operated.

Fastest lap time (measurement

screen)

A

Navigation system-linked

display

Current lap time

Total lap time

Past lap times

Select to display the route guidance

information.

C

D

Records of the 50 most recent lap times

will be displayed.

Audio system-linked display

Select to enable selection of an

audio source or track on the display

using the meter control switches.

Meter control switch operation

guide

 Changing between the stop-

watch screens

2-1. Instrument cluster

98

Select to enable/disable the shift posi-

tion indicator and shift-up indicator.

Driving support system

information display (if

equipped)

 REV. (REV indicator)

ꢀ Select to enable/disable the rev indi-

cator.

Select to display the operational

status of the Adaptive Cruise Con-

trol system (P.185, 201)

ꢀ Select to enable/disable the sounding

of a buzzer when the REV indicator is

illuminated.

ꢀ Select to set the engine speed at

which the rev indicator (orange) will

begin to be displayed.

Driving support system set-

ting display

■

Vehicle functions and settings

that can be changed

The settings of the following sys-

tems can be changed.

P.377

 LDW (Lane Departure Warning)

(if equipped)

■

●

Suspension of the settings display

 PCB (Pre-Collision Braking) (if

Some settings cannot be changed

while driving. When changing set-

tings, park the vehicle in a safe place.

equipped)

 BSD/RCTA (if equipped)

●

If a warning message is displayed,

operation of the settings display will

be suspended.

 RAB (Reverse Automatic Brak-

ing system) (if equipped)



(Sonar Audible Alarm) (if

equipped)

WARNING

■

Cautions during setting up the

display

 SRH (Steering Responsive

As the engine needs to be running

during setting up the display, ensure

that the vehicle is parked in a place

with adequate ventilation. In a closed

area such as a garage, exhaust

gases including harmful carbon mon-

oxide (CO) may collect and enter the

vehicle. This may lead to death or a

serious health hazard.

Headlight) (if quipped)

Settings display

■

Meter display settings that can

be changed

 Units (if equipped)

Select to change the units of measure

displayed.

NOTICE

■

While setting up the display

 Startup Scrn

To prevent battery discharge, ensure

that the engine is running while set-

ting up the display features.

Select to enable/disable the startup

screen when the engine switch is

turned to ON.

 GSI (if equipped)

Vehicle status information and indicators for Your Toyota 86 2 Door Second Generation (2022-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals