When trouble arises -> Essential information for Your Toyota 86 2 Door Second Generation (2022-2025)

7-1. Essential information  
326  
7-1.Essential information  
Emergency flashers  
If your vehicle has to be  
stopped in an emer-  
gency  
The emergency flashers are  
used to warn other drivers  
when the vehicle has to be  
stopped on the road due to a  
breakdown, etc.  
Only in an emergency, such as  
if it becomes impossible to  
stop the vehicle in the normal  
way, stop the vehicle using the  
following procedure:  
Operating instructions  
Press the switch.  
Stopping the vehicle  
All the turn signal lights will flash.  
1 Steadily step on the brake pedal  
To turn them off, press the switch once  
again.  
with both feet and firmly depress  
it.  
Do not pump the brake pedal repeat-  
edly as this will increase the effort  
required to slow the vehicle.  
2 Shift the shift lever to N.  
If the shift lever is shifted to N  
3 After slowing down, stop the  
vehicle in a safe place by the  
road.  
4 Stop the engine.  
Emergency flashers  
If the emergency flashers are used for a  
long time while the engine is not operat-  
ing, the battery may discharge.  
If the shift lever cannot be shifted  
to N  
3 Keep depressing the brake  
pedal with both feet to reduce  
vehicle speed as much as possi-  
ble.  
4 To stop the engine, press and  
hold the engine switch for 2 con-  
secutive seconds or more, or  
7-1. Essential information  
327  
press it briefly 3 times or more in  
succession.  
If the vehicle is sub-  
merged or water on the  
road is rising  
This vehicle is not designed to  
be able to drive on roads that  
are deeply flooded with water.  
Do not drive on roads where  
the roads may be submerged  
or the water may be rising. It is  
dangerous to remain in the  
vehicle, if it anticipated that the  
vehicle will be flooded or set a  
drift. Remain calm and follow  
the following.  
5 Stop the vehicle in a safe place  
by the road.  
WARNING  
If the engine has to be turned off  
while driving  
If the door can be opened, open  
Power assist for the brakes and steer-  
ing wheel will be lost, making the  
brake pedal harder to depress and  
the steering wheel heavier to turn.  
Decelerate as much as possible  
before turning off the engine.  
the door and exit the vehicle.  
If the door cannot be opened,  
open the window using the  
power window switch and ensure  
an escape route.  
If the window can be opened,  
exit the vehicle through the win-  
dow.  
7
If the door and window cannot be  
opened due to the rising water,  
remain calm, wait until the water  
level inside the vehicle rises to  
the point that the water pressure  
inside of the vehicle equals the  
water pressure outside of the  
vehicle and then open the door  
after waiting for the rising water  
to enter the vehicle, and exit the  
vehicle. When the outside water  
level exceeds half the height of  
the door, the door cannot be  
opened from the inside due to  
7-1. Essential information  
water pressure.  
Water level exceeds the floor  
328  
When the water level exceeds the floor  
and time has passed, the electrical  
equipment will get damaged, the power  
windows will not operate, the engine  
stop, and the vehicle may not be able to  
get moving.  
Using an emergency escape ham-  
mer*  
Laminated glass is used in the wind-  
shield on this vehicle.  
Laminated glass cannot be shattered  
with an emergency hammer*.  
Tempered glass is used in the windows  
on this vehicle.  
*: Contact any authorized Toyota retailer  
or Toyota authorized repairer, or any  
reliable repairer, or aftermarket acces-  
sory manufacturer for further informa-  
tion about an emergency hammer.  
WARNING  
Caution while driving  
Do not drive on roads where the  
roads may be submerged or the water  
may be rising. Otherwise the vehicle  
may be damaged and cannot move,  
as well as become flooded and set a  
drift, which may lead to death.