Get Audio System -> CD player operation Guide for Toyota Aurion 4 Door First Generation (2006-2012)

AUDIO SYSTEM

—CD player operation

To stop on a station, or to cancel “SCAN”,

press “SCAN” [12] again.

For information on general features of your

audio system, see “Audio system—Basic

operation” on page 140 of this Section.

To scan only those stations stored under

preset buttons “1” [5] through ”6” [10], press

and hold “SCAN” [12] until a beep is heard.

NOTICE

To stop on a station, or to cancel “SCAN”,

press “SCAN” [12] again.

Never try to disassemble or oil any part

of the compact disc player. Do not insert

anything except a compact disc into the

slot.

PRESETTING STATIONS

Favourite radio stations can be stored at the

6 preset buttons “1” [5] through “6” [10]. Each

button can store one AM and two FM stations.

TURNING ON THE COMPACT DISC

PLAYER

Manually presetting stations

If the audio system is OFF, you can turn ON

the compact disc player by pressing “DISC”

[4]. A disc must already be loaded in the

player.

1. Tune to a radio station of your choice.

2. Press and hold a preset button until you

hear a beep. The station is now set to this

button.

If the audio system is OFF, pressing

“POWER VOLUME” [1] will turn the CD

player ON if the compact disc function was

selected prior to the audio system being

turned OFF.

Selecting a preset station

1. Select preset memory group, AM, FM1 or

FM2. See “SELECTING THE BAND” on

page 142 for more information.

Press “DISC” [4] to switch from radio oper-

ation to compact disc operation.

2. Press the preset button for the station you

want. The button number and frequency

will appear on the display.

LOADING A CD

Insert a disc into the slot [16] by gently push-

ing it in with the label side up. (The player

will automatically eject a disc if the label side

is down).

The compact disc player will play from track

1 through to the end of the disc. Then it will

play from track 1 again.

EJECTING A CD

Press the eject button [13] to eject a CD.

To eject a specific CD (type 2), first select

the appropriate disc using the “ DISC” [7]

or “ DISC” [8] buttons.

After you set the ignition to LOCK, you can

eject a CD but you cannot reinsert one.

EJECTING ALL CDS (TYPE 2)

Press and hold the eject button [13] until you

hear a beep to eject all CDs. The last disc

played before pressing the button will be

ejected first.

143

AUDIO SYSTEM

SELECTING A DISC (WITH CD CHANGER)

Press “SEEK TRACK ” [11] to move back-

ward through the program to the desired

track. For example, press [11] three times to

skip back three tracks from the track that is

currently playing.

To select a specific CD press the “ DISC”

[7] or “ DISC” [8] buttons.

REPEATING A TRACK

Quickly press “2” [6] to repeat the track play-

DISC UP AND DISC DOWN (WITH CD

CHANGER)

ing. “

” will appear on the display.

The track will continue to be repeated until

you press [6] again.

Press “DISC ” [8] or “DISC ” [7] to ad-

vance to the desired disc in the magazine.

The selected disc number will appear on the

display.

REPEATING A DISC (WITH CD CHANGER)

Press and hold “2” [6] until you hear a beep

FAST REVERSE

to repeat the disc playing. “

pear on the display.

” will ap-

Press and hold “5

” [9] until you hear a

beep to fast reverse through the track.

RANDOMLY PLAYING THE TRACKS

Release [9] to stop fast-reverse and play the

track from that point.

Quickly press “1” [5] to randomly play the

tracks on the CD. “

the display.

” will appear on

FAST FORWARD

Press [5] once more to cancel.

Press and hold “6

” [10] until a beep is

heard to fast forward through the track.

RANDOMLY PLAYING THE CD MAGAZINE

(WITH CD CHANGER)

Release [10] to stop fast forward and play the

track from that point.

Press and hold “1” [5] until you hear a beep

to randomly play the tracks on the CD maga-

TEXT DATA

zine. “

” will appear on the display.

Press “TEXT” [17] to change the display for

a compact disc that contains text data.

Press [5] once more to cancel.

SCANNING TRACKS

If the entire title does not display, press and

hold [17] until you hear a beep. The remaining

text is then displayed.

Quickly press “SCAN” [12] to scan each track

on a CD. “SCAN” will appear on the display.

If this button is pressed while a compact disc

that does not contain text data is being played

’NO TITLE” will be displayed.

Press “SCAN” [12] once more to cancel.

SCANNING FIRST TRACK OF CDS IN

MAGAZINE (WITH CD CHANGER)

LOAD MULTIPLE DISCS (TYPE 2)

Press and hold “SCAN” [12] until you hear

a beep to scan the first track on each CD in

Type 2 compact disc players can load up to

six discs.

the magazine. “ SCAN” will appear on the

display.

To load only one disc, quickly press the

“LOAD” button [18]. When the indicators on

both sides of the slot turn green, insert the

compact disc.

Press “SCAN” [12] once more to cancel.

TRACK UP AND TRACK DOWN

Press “SEEK TRACK ” [11] to advance

through the program to the desired track. For

example, press [11] three times to skip three

tracks ahead of the track that is currently

playing.

After the disc is loaded, the shutter of the slot

will close. If no compact disc is inserted, the

shutter will close after 15 seconds.

To load multiple compact discs, press and

hold the button until you hear a beep. When

144

AUDIO SYSTEM

—MP3/WMA player operation

the indicators on both sides of the slot turn

green, insert the first compact disc.

For information on general features of your

audio system, see “Audio system—Basic

operation” on page 140 of this Section.

After the disc is loaded, the shutter of the slot

will close. After a few seconds, the shutter

will automatically open again and the indica-

tors will turn green and the next disc can be

inserted. The same process can be applied

for loading the rest of the discs.

MANUALLY SELECTING FILES

Turn the “TUNE FILE” [2] knob clockwise to

file up and the knob anti-clockwise to file

down.

CHANGING FOLDERS

If the player is full of discs, “DISC FULL” will

appear on the display. If no compact disc is

inserted, the shutter will close after 15 sec-

onds.

To skip up and down to a different folder press

“FOLDER ” or “FOLDER ” [15] until the

number of the folder you want to listen to is

displayed.

ERROR MESSAGES

To jump to the first folder, press and hold the

“” side of the button until you hear a beep.

If the player malfunctions, your audio system

will display following error messages.

RANDOMLY PLAYING FILES IN A FOLDER

“WAIT”: The compact disc player unit may be

too hot. Allow the player to cool down.

Quickly press “1” [5] to randomly play the

“ERROR 1”: The disc may be dirty, damaged

or inserted incorrectly (up-side down). Clean

the disc and re-insert it.

files in a folder. “

display.

” will appear on the

Press [5] once more to cancel.

“NO DISC”:

separate compact disc

RANDOMLY PLAYING ALL FILES ON A

DISC

changer is empty. Insert a disc.

“ERROR 3”: There is a problem inside the

system.

Press and hold “1” [5] until you hear a beep

to randomly play the files on the CD.

“ERROR 4”: Over-current. Ask your Toyota

dealer to inspect.

“

” will appear on the display.

Press [5] once more to cancel.

REPEATING A FILE

“CD OPEN”: The compact disc changer lid

of separate unit is open. Close the compact

disc changer lid.

Quickly press “2“ [6] to repeat the file playing.

If “NO MUSIC” appears on the display, it indi-

cates that a disc with no MP3/WMA data has

been inserted. Remove the disc from the

player and insert an MP3/WMA data disc.

“

” will appear on the display.

The file will continue to be repeated until you

press [6] again.

REPEATING A FOLDER

If the malfunction still exists, take your vehi-

cle to your Toyota dealer.

Press and hold “2” [6] until you hear a beep

to repeat the files in the current folder play-

ing. “

” will appear on the display.

FILE UP AND FILE DOWN

Press “SEEK TRACK ” [11] to advance to

the desired file. For example, press [11] three

times to skip file tracks ahead of the file that

is currently playing.

145

Audio System -> CD player operation for Your Toyota Aurion 4 Door First Generation (2006-2012)

Related Topics

Audio System

Popular Owner Manuals

Latest Owner Manuals