Corrosion Prevention -> Protecting from corrosion for Your Toyota Aurion 4 Door First Generation (2006-2012)

CORROSION PREVENTION AND APPEARANCE CARE  
Protecting your Toyota from  
corrosion  
Toyota, through the diligent research, design  
and use of the most advanced technology  
available, helps prevent corrosion and pro-  
vides you with the finest quality vehicle con-  
struction. Now, it is up to you. Proper care  
of your Toyota can help ensure long-term cor-  
rosion prevention.  
D If you drive on salted roads in the winter  
or if you live near the ocean, you should  
hose off the undercarriage at least once  
a month to minimise corrosion.  
D High pressure water or steam is effective  
for cleaning the vehicle’s underside and  
wheel housings. Pay particular attention  
to these areas as it is difficult to see all  
the mud and dirt. It will do more harm than  
good to simply wet the mud and debris  
without removing. The lower edge of  
doors, rocker panels and frame members  
have drain holes which should not be al-  
lowed to clog with dirt as trapped water  
in these areas can cause corrosion.  
The most common causes of corrosion to  
your vehicle are:  
D The accumulation of road salt, dirt and  
moisture in hard-to-reach areas under the  
vehicle.  
D Chipping of paint, or undercoating caused  
by minor accidents or by stones and gravel.  
Care is especially important if you live in  
particular areas or operate your vehicle  
under certain environmental conditions:  
NOTICE  
Vehicls with the sports body kit:  
D Road salt or dust control chemicals will  
accelerate corrosion, as will the presence  
of salt in the air near the sea-coast or in  
areas of industrial pollution.  
D Aid directing high pressure water  
or steam where the sports body kit  
parts meet the vehicle body parts.  
Doing so may damage the sports body  
kit parts.  
D High humidity accelerates corrosion es-  
pecially when temperatures range jst  
above the freezing point.  
D Wash the underside of the vehicle tho-  
D Wetness or dampness to certain arts of  
your vehicle for an extended period of  
time, may cause corrosion even though  
other parts of the vehicmay be dry.  
roughly when winter is over.  
See “Washing and waxing your Toyota” on  
page 239 in this Section for more tips.  
Check the condition of your vehicle’s  
paint and trim. If you find any chips or  
scratches in the paint, touch them up immedi-  
ately to prevent corrosion from starting. If the  
chips or scratches have gone through to bare  
metal, have a qualified body shop make the  
repair.  
D High ambient tempratures can cause  
corrosion to those components of the ve-  
hicle which do not dry quickly due to lack  
of proper ventilation.  
The above signifies the necessity to keep  
your vehicle, particularly the underside, as  
clean as possible and to repair any damage  
to paint or protective coatings as soon as  
possible.  
Check the interior of your vehicle. Water  
and dirt can accumulate under the floor mats  
and could cause corrosion. Occasionally  
check under the mats to make sure the area  
is dry. Be particularly careful when transport-  
ing chemicals, cleansers, fertilisers, salt,  
etc.; these should be transported in proper  
containers. If a spill or leak should occur, im-  
mediately clean and dry the area.  
To help prevent corrosion on your Toyota,  
follow these guidelines:  
Wash your vehicle frequently. It is, of  
course, necessary to keep your vehicle clean  
by regular washing, but to prevent corrosion,  
the following points should be observed:  
238