IGNITION SWITCH, TRANSMISSION AND PARKING BRAKE
When the traction control system is operat-
ing, the following conditions occur:
If the system failure warning comes on while
driving, the system does not work. However,
as conventional braking operates when ap-
plied, there is no problem to continue your
driving.
D The system controls the spinning of the
front wheels. At this time, the slip indica-
tor light blinks.
D You may feel vibration or noise in your
vehicle, caused by operation of the
brakes. This indicates the system is func-
tioning properly.
NOTICE
In the following cases, contact your
Toyota dealer:
The slip indicator light comes on for a few
seconds when the ignition switch is set to
ON.
D The warning light does not come on
after the ignition switch is set to ON.
D The warning light remains on after the
ignition switch is set to ON.
NOTICE
D The warning light comes on while
If the indicator light does not come on
when the ignition switch is set to ON,
contact your Toyota dealer.
driving.
SYSTEM FAILURE WARNING
(with multi-information display)
SYSTEM FAILURE WARNING (without
multi-information display)
The above message and master warning light
warn that there is a problem somewhere in
the vehicle stability control system or the
traction control system.
The VSC warning light warns that there is a
problem somewhere in the vehicle stability
control system or the traction control system.
If the system failure warning comes on while
driving, the system does not work. However,
as conventional braking operates when ap-
plied, there is no problem to continue your
driving.
The VSC warning light will come on when the
ignition switch is set to ON and will go off after
a few seconds.
128
English 
