STARTING AND DRIVING
How to start the engine—
—Cranking hold function (vehicles
with smart entry and start system)
Before starting the engine
1. Check the area around the vehicle before
entering it.
Once you press ENGINE START STOP but-
ton (engine switch) and release it, the crank-
ing hold function continues to crank the en-
gine until it starts.
2. Adjust seat position, seatback angle, seat
cushion height, head restraint height and
steering wheel angle and steering column
length.
The function stops cranking the engine after
about 25 seconds maximum if the engine has
not started yet. When you crank the engine
again, wait a few seconds and restart it.
3. Adjust the inside and outside rear view
mirrors.
If you press and hold the ENGINE START
STOP button, the function will keep cranking
for about 30 seconds maximum.
4. Lock all doors.
5. Fasten seatbelts.
200
English 
