Get Other equipment -> Multi-information display Guide for Toyota Avalon 4 Door Second Generation (2000-2004)

’03 AVALON U (L/O 0206)

Multi−information display—

1. Outside temperature display

2. Clock

3. Compass

4. Calendar

5. Cruise information display

6. “LIGHT” button

7. “MODE” button

8. “RESET/ADJ” button

9. “DISPLAY” button

2003 AVALON (OM41401U)

186

’03 AVALON U (L/O 0206)

—Before using the

multi−information display

Operate the multi−information display

with the ignition switch on.

“LIGHT” button

This button is used to select the illumi-

nation pattern of the display.

When the ignition switch is turned to

“ON”, the last previously used mode dis-

played just before the ignition switch is

turned off will appear.

Every time you push the “LIGHT” button,

the display illuminates in the following or-

der.

If the electrical power source has been

disconnected from the multi−information

display, the display will automatically be

set to the initial mode.

1. All the parts of the display are illumi-

nated.

2. Clock, outside temperature display and

compass are illuminated.

When the instrument panel lights are

turned on, the brightness of the display

will be reduced.

3. Illumination is off.

“MODE” and “RESET/ADJ” buttons

These buttons are used to select the

item to be reset or adjusted.

Every time you push the “MODE” button,

the display toggles in the following order.

1. Hour

2. Minute

3. Year

4. Month

5. Day

6. English or metric unit selection of the

outside temperature display and cruise

information display

7. Compass deviation calibration (zone)

8. Compass circling calibration

2003 AVALON (OM41401U)

187

’03 AVALON U (L/O 0206)

—Clock

—Calendar

When the item desired to be corrected

appears, reset or adjust it by pushing the

“RESET/ADJ” button.

“DISPLAY” button

This button is used to toggle the func-

tions of the cruise information display.

Every time you push the “DISPLAY” but-

ton, the display toggles.

For

information display”.

more

details,

see

“—Cruise

CAUTION

The digital clock indicates the time.

The digital calendar indicates the date.

Do not adjust the display while the

vehicle is moving. Be sure to adjust

the display only when the vehicle is

stopped.

If the electrical power source has been

disconnected, the time display will auto-

matically be set to 1:00 a.m.

If the electrical power source has been

disconnected, the calendar display will au-

tomatically be set to “THU JAN 1”.

To reset the hour: Push the “MODE” but-

ton until the hour display appears and

blinks. Then push the “RESET/ADJ” but-

ton.

To reset the minutes: Push the “MODE”

button until the minute display appears

and blinks. Then push the “RESET/ADJ”

button.

To reset the year: Push the “MODE” but-

ton until the year display appears and

blinks. Then push the “RESET/ADJ” but-

ton. (After the year 2021 appears, the

number returns to 2002.)

To reset the month: Push the “MODE”

button until the month display appears and

blinks. Then push the “RESET/ADJ” but-

ton.

After resetting the clock, push the “MODE”

button until the display returns to normal

calendar mode.

To reset the day: Push the “MODE” button

until the day display appears and blinks.

Then push the “RESET/ADJ” button.

2003 AVALON (OM41401U)

188

’03 AVALON U (L/O 0206)

—Outside temperature display

—Cruise information display

After resetting the calendar, push the

“MODE” button until the display returns to

normal calendar mode.

The outside temperature display indi-

cates outside air temperatures.

To set the unit, push the “MODE” button

until the unit display appears and blinks.

Then push the “RESET/ADJ” button to se-

lect “_C” or “_F”. (At this time, cruise

information and air conditioning displays

also change.)

After setting the unit, push the “MODE”

button until the display returns to normal

calendar mode.

2003 AVALON (OM41401U)

189

’03 AVALON U (L/O 0206)

The cruise information display indicates

the following information.

1. Instantaneous fuel consumption

(“INST ECON”)

2. Average fuel consumption after re-

fueling

(“AVG ECON”)

1. Instantaneous fuel consumption

The instantaneous fuel consumption is

calculated and displayed based on driv-

ing distance and fuel consumption for

2 seconds with the engine running.

Average fuel consumption after refuel-

ing is calculated and displayed based

on total driving distance and total fuel

consumption with the engine running.

2. Average fuel consumption after refuel-

ing

3. Average vehicle speed

4. Driving range

The displayed value is updated every 2

seconds.

The displayed value is updated every 10

seconds.

5. Driving time

Note that an accurate figure may not be

shown in the following cases.

Every time you push the “DISPLAY” but-

ton, the display toggles through this infor-

mation.

To reset the calculations, push the

“RESET/ADJ” button.

D When the vehicle is stopped with the

engine running, the display will indicate

the extremely high fuel consumption.

The calculation is reset when the ignition

switch is turned off.

The displayed values in the cruise infor-

mation display indicate general driving

conditions. Accuracy varies with driving

habits and road conditions.

D When the vehicle is driving down a

long slope, applying the engine brake,

the display will indicate the extremely

low fuel consumption.

3. Average vehicle speed

(“AVG SPEED”)

Average vehicle speed is calculated and

displayed based on total driving dis-

tance and total driving time with the

engine running.

If the electrical power source has been

disconnected, the display will automatically

be set to instantaneous fuel consumption.

The calculation is reset when the ignition

switch is turned off.

To set the unit, push the “MODE” button

until the unit display appears and blinks.

Then push the “RESET/ADJ” button to se-

lect km/liter or mile/gallon. (At this time,

the outside temperature and air condition-

ing displays also change.)

The displayed value is updated every 10

seconds.

To reset the calculations, push the

“RESET/ADJ” button.

The calculation is reset when the ignition

switch is turned off.

After setting the unit, push the “MODE”

button until the display returns to normal

calendar mode.

2003 AVALON (OM41401U)

190

’03 AVALON U (L/O 0206)

—Compass

4. Driving range

(“FUEL RANGE”)

To reset the calculations, push the

“RESET/ADJ” button.

The distance the vehicle can travel with

the remaining fuel is calculated and

displayed based on the quantity of re-

maining fuel and past fuel consumption.

The calculation is reset when the ignition

switch is turned off.

The displayed value is updated every time

when the fuel equivalent for 1 km is con-

sumed.

Every time you refuel the vehicle, the

driving range calculation is automatically

reset.

The actual driving range varies with driv-

ing habits and road conditions. If fuel con-

sumption is good, the driving range will be

longer. If fuel consumption is poor, the

driving range will be shorter.

The compass indicates the direction

that the vehicle is heading. In the

above case, it shows that the vehicle is

heading south.

5. Driving time

(“TRIP TIME”)

Displays

Directions

N

NE

E

North

Northeast

East

The elapsed time after the engine starts

is displayed.

SE

S

SW

W

Southeast

South

Southwest

West

Northwest

When the engine is started, driving time

is counted from 0:00. Up to 99:59 (99

hours, 59 minutes) can be displayed.

When the driving time exceeds 99:59, the

counter returns to 0:00.

NW

2003 AVALON (OM41401U)

191

Other equipment -> Multi-information display for Your Toyota Avalon 4 Door Second Generation (2000-2004)

Related Topics

Other equipment

Popular Owner Manuals

Latest Owner Manuals