Get Instrument cluster -> Multi-information display Guide for Toyota Avalon 4 Door Fourth Generation (2013-2018)

82

2. Instrument cluster

Multi-information display

Display contents

The multi-information display presents the driver with a variety of driv-

ing-related data.

● Trip information (→P. 83)

Displays the following items:

• Distance to empty

• Average fuel economy

• Current fuel economy

• ECO Drive Level

• Turn-by-turn

navigation

(vehicles with a navigation

system)

● Settings (→P. 85)

● Warning messages and reminder messages (→P. 396)

● Automatically displayed when a malfunction occurs in one of the

vehicle’s systems or when a reminder message is required. The

display returns to the previous screen by pressing the “DISP” but-

ton. (→P. 83)

● Cruise control display (if equipped) (→P. 235)

● Dynamic radar cruise control display (if equipped) (→P. 222)

● LDA (Lane Departure Alert with steering control) display (if

equipped) (→P. 211)

● PCS (Pre-Collision System) display (if equipped) (→P. 198)

● Tire pressure warning system display (→P. 343)

83

2. Instrument cluster

Trip information

■ Switching the display

Items

displayed

can

be

switched by pressing the

“DISP” button.

2

■ Distance to empty

Displays the estimated maximum distance that can be driven with

the quantity of fuel remaining.

• This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

• When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

■ Digital speedometer

Displays the current vehicle speed.

■ Average fuel economy

Displays the average fuel consumption since the function was

reset.

• The function can be reset by pressing and holding the “DISP” button

when the average fuel consumption is displayed.

• Use the displayed average fuel consumption as a reference.

■ Current fuel economy

Displays the current rate of fuel consumption.

84

2. Instrument cluster

■ ECO Drive Level

Suggests Eco driving level

based on acceleration.

1

All green suggests the status

of the most Eco-friendly driv-

ing.

2

All blue suggests the status

of the least Eco-friendly driv-

ing.

■ Sway warning (if equipped)

Detects the sway of the vehicle within a lane, which is often associ-

ated with a decrease in the driver’s attention level, and displays the

decrease in attention using a segment display.

The fewer segments lit, the more the driver may need to rest.

This display is a part of the LDA (Lane Departure Alert with steering

control) system. The display is enabled when the operating conditions

of the vehicle sway warning are met. (→P. 211)

■ Turn-by-turn navigation (vehicles with a navigation system)

Displays information from the navigation system about the next turn

on the guidance route.

85

2. Instrument cluster

Setting up the displays

◆ Customizable items

■ Meter settings

Item

Settings

ON

Details

Select to enable/disable the digital

speedometer.

Digital Speed

OFF

English

Metric

ON

Units (vehicles without a

navigation system)

Select to change the units of mea-

sure displayed.

2

Turn-by-Turn

(vehicles

Select to enable/disable the Turn-

by-turn navigation.

with a navigation system)

OFF

Select to enable/disable the Eco

Driving Indicator Light.

ECO Indicator

ON

■

LDA (Lane Departure Alert with steering control) (if

equipped) (→P. 211)

The following LDA system settings can be changed:

Item

Settings

ON

Details

Select to enable/disable steering

wheel assistance.

Steering Assist

OFF

Standard

High

Select to set the warning sensitiv-

ity.

Sensitivity

Alert

ON

Select to enable/disable the vehi-

cle sway warning.

OFF

Standard

Low

Select to set the vehicle sway

warning sensitivity.

Sensitivity

High

86

2. Instrument cluster

◆ Changing the settings

1

While the vehicle is stopped,

press the “DISP” button until

the

“Settings”

screen

appears.

2

3

4

Press and hold the “DISP”

button while the “Settings”

screen is displayed.

Press the “DISP” button to

highlight the desired item.

Press and hold the “DISP”

button to change the setting.

87

2. Instrument cluster

5

To exit the “Settings” screen,

press the “DISP” button

repeatedly until “EXIT” is

highlighted and then press

and hold the “DISP” button.

If the Lane Departure settings

screen is displayed, press the

“DISP” button repeatedly until

“RETURN” is highlighted, then

press and hold the “DISP”

switch to return to the “Settings”

screen.

2

1

The display goes back to step

.

■System check display

After turning the engine switch to IGNITION ON mode, “SYSTEM CHECK” is

displayed while system operation is checked.

■Trip summary display

When the engine is turned off, drive infor-

mation data since the engine was started

is displayed for 3 seconds.

■Setting display automatic cancelation

In the following situations, setting display in which the settings can be

changed through the “DISP” button will automatically be turned off.

●When a warning message appears while the setting display is displayed

●When the vehicle begins to move while the setting display is displayed

■Tire inflation pressure

●It may take a few minutes to display the tire inflation pressure after the

engine switch is turned to IGNITION ON mode. It may also take a few

minutes to display the tire inflation pressure after inflation pressure has

been adjusted

●“---” may be displayed if the tire information cannot be determined due to

unfavorable radio wave conditions.

●Tire inflation pressure changes with temperature. The displayed values

may also be different from the values measured using a tire pressure

gauge.

88

2. Instrument cluster

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

WARNING

■The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal

information display. At extremely low temperatures, the information display

monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or injury.

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that

the vehicle is parked in a place with adequate ventilation. In a closed area

such as a garage, exhaust gases including harmful carbon monoxide (CO)

may collect and enter the vehicle. This may lead to death or a serious

health hazard.

NOTICE

■During setting up the display

To prevent battery discharge, ensure that the engine is running while setting

up the display features.

Instrument cluster -> Multi-information display for Your Toyota Avalon 4 Door Fourth Generation (2013-2018)

Related Topics

Popular Owner Manuals

Latest Owner Manuals