Get Operation of each component -> Adjusting the seats Guide for Toyota Avanza SUV Third Generation (2022-2026)

131

3-3. Adjusting the seats

Front seats

Adjustment procedure

 Driver’s seat

3

 Passenger’s seat

Seat position adjustment switch

Vertical height adjustment

switch ( for passen-

ger’s seat)

1

4

5

6

Seatback angle adjustment

switch

2

Lumbar support adjustment

switch ( for passen-

ger’s seat)

Seat cushion (front) angle

adjustment switch (

for passenger’s seat)

3

Seat cushion length adjust-

ment switch ()

132

3-3. Adjusting the seats

■Power easy access system (vehicles with driving position memory)

The auto away/return function enables easy access by activating when the

driver attempts to enter or exit the vehicle.

●When the power switch has been turned to ON mode or the driver’s seat

belt has been fastened, the driver’s seat will move forward.

●When the power switch has been turned off and the driver’s seat belt has

been unfastened, the driver’s seat will move backward.

■Customization

Settings (e.g. driver’s seat movement when exiting the vehicle) can be

changed. (Customizable features: →P. 461)

WARNING

■When adjusting the seat position

●Take care when adjusting the seat position to ensure that other passen-

gers are not injured by the moving seat.

●Do not put your hands under the seat or near the moving parts to avoid

injury.

Fingers or hands may become jammed in the seat mechanism.

■Seat adjustment

To reduce the risk of sliding under the lap belt during a collision, do not

recline the seat more than necessary.

If the seat is too reclined, the lap belt may slide past the hips and apply

restraint forces directly to the abdomen, or your neck may contact the

shoulder belt, increasing the risk of death or serious injury in the event of an

accident.

Adjustments should not be made while driving as the seat may unexpect-

edly move and cause the driver to lose control of the vehicle.

■When adjusting the seat positions

Make sure to leave enough space around the feet so they do not get stuck.

133

3-3. Adjusting the seats

Driving position memory^∗

This feature automatically adjusts the driver’s seat and outside

rear view mirrors to make entering and exiting the vehicle easier

or to suit your preferences.

Power easy access system

The seat is automatically adjusted to allow the driver to enter and exit

the vehicle easily.

When all of the following have

been performed, the driver’s seat

is automatically adjusted to a

position that allows driver to enter

and exit the vehicle easily.

3

• The shift lever has been shifted

to P.

• The power switch has been

turned off.

• The driver’s seat belt has been unfastened.

When any of the following is performed, the driver’s seat automatically

returns to its original position.

• The power switch has been turned to ACCESSORY or ON mode.

• The driver’s seat belt has been fastened.

■Operation of the power easy access system

When exiting the vehicle, the power easy access system may not operate if

the seat is already close to the rearmost position, etc.

■Customization

The seat movement amount settings of the power easy access system can

be customized. (Customizable features: →P. 461)

∗:

134

3-3. Adjusting the seats

Driving position memory

Your preferred driving position (the position of the driver’s seat and

outside rear view mirrors) can be recorded and recalled by pressing a

button.

Two different driving positions can be recorded into memory.

■ Recording procedure

1

Check that the shift lever is in P.

2

Turn the power switch to ON mode.

3

Adjust the driver’s seat and outside rear view mirrors to the

desired positions.

4

While pressing the “SET”

button, or within 3 seconds

after the “SET” button is

pressed, press button “1” or

“2” until the signal beeps.

If the selected button has

already been preset, the previ-

ously recorded position will be

overwritten.

■ Recall procedure

1

Check that the shift lever is in P.

2

Turn the power switch to ON mode.

3

Press button “1” or “2” to

recall the desired position.

135

3-3. Adjusting the seats

■To stop the position recall operation part-way through

Perform any of the following:

●Press the “SET” button.

●Press button “1” or “2”.

●Adjust the seat using the switches (only cancels seat position recall).

■Seat positions that can be memorized (→P. 131)

The seat position, with the exception of the portions adjusted by the seat

cushion length switch and lumbar support switch, can be recorded.

■Operating the driving position memory after turning the power switch off

Recorded seat positions can be activated up to 180 seconds after the driver’s

door is opened and another 60 seconds after it is closed again.

■In order to correctly use the driving position memory function

3

If a seat position is already in the furthest possible position and the seat is

operated in the same direction, the recorded position may be slightly different

when it is recalled.

136

3-3. Adjusting the seats

Memory recall function

Each electronic key can be registered to recall your preferred driving

position.

■ Registering procedure

Record your driving position to button “1” or “2” before performing

the following:

Carrying only the key to which you want to link the driving position,

shift the shift lever to P and then close the driver’s door.

If 2 or more keys are in the vehicle, the driving position cannot be

linked properly.

1

Turn the power switch to ON mode and recall the position which

you want to link.

2

While pressing the button to

recall the position, press the

driver’s door lock switch

(either lock or unlock) until

the signal beeps.

The driving position is recalled

when the driver’s door is

unlocked using the entry func-

tion or wireless remote control

and the driver’s door is opened.

■ Recall procedure

1

Carry the electronic key that has been registered to the driving

position, and then unlock and open the driver’s door using the

smart key system or wireless remote control.

The driving position will move to the recorded position. However, the

seat will move to a position slightly behind the recorded position in order

to make entering the vehicle easier.

If the driving position is in a position that has already been recorded, the

seat and outside rear view mirrors will not move.

2

Turn the power switch to ACCESSORY or ON mode, or fasten a

seat belt.

The seat will move to the recorded position.

137

3-3. Adjusting the seats

■ Cancelation procedure

Carry only the key to which you want to cancel the linked door

unlock operation.

If 2 or more keys are in the vehicle, the driving position cannot be

canceled properly.

1

Turn the power switch to ON mode.

2

While pressing the “SET” button, press the driver’s door lock

switch (either lock or unlock) until the signal beeps.

■Recalling the driving position using the memory recall function

●Different driving positions can be registered for each electronic key. There-

fore, the driving position that is recalled may be different depending on the

key being carried.

3

●If a door other than the driver’s door is unlocked with the smart key system,

the driving position cannot be recalled. In this case, press the driving posi-

tion button which has been set.

■Customization

The unlock door settings of the memory recall function can be customized.

(Customizable features: →P. 461)

WARNING

■Seat adjustment caution

Take care during seat adjustment so that the seat does not strike the rear

passenger or squeeze your body against the steering wheel.

138

3-3. Adjusting the seats

Head restraints

Head restraints are provided for all seats.

Front seats

Vertical adjustment

Up

1

Pull the head restraints up.

Down

2

Push the head restraint down while

pressing the lock release button.

Lock release button

Rear seats (except center seat)

Up

1

Pull the head restraints up.

Down

2

Push the head restraint down while

pressing the lock release button.

Lock release button

139

3-3. Adjusting the seats

■Removing the head restraints (except rear center seat)

Pull the head restraint up while pressing

the lock release button.

Lock release button

■Installing the head restraints

 Front seats

Align the head restraint with the installa-

tion holes and push it down to the lock

position.

3

Press and hold the lock release button

when lowering the head restraint.

Lock release button

 Rear seats (except center seat)

Align the head restraint with the installa-

tion holes and push it down to the lowest

lock position while pressing the lock

release button.

Lock release button

■Adjusting the height of the head restraints (except rear center seat)

Make sure that the head restraints are

adjusted so that the center of the head

restraint is closest to the top of your ears.

■Adjusting the rear seat head restraint (except center seat)

Always raise the head restraint one level from the stowed position when

using.

140

3-3. Adjusting the seats

WARNING

■Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to

do so may result in death or serious injury.

●Use the head restraints designed for each respective seat.

●Adjust the head restraints to the correct position at all times.

●After adjusting the head restraints, push down on them and make sure

they are locked in position.

●Do not drive with the head restraints removed.

Operation of each component -> Adjusting the seats for Your Toyota Avanza SUV Third Generation (2022-2026)

Related Topics

Operation of each component

Popular Owner Manuals

Latest Owner Manuals