Machine Translated by Google
OTHER EQUIPMENT
264
Clock
Outdoor temperature display
(without combined display)
(without combined display)
By pressing the setting knob, the hour indicator will flash
and you can set the hour.
The displayed temperature range is from –30°C to 50°C.
The key must be in the "ON" position.
Press the setting knob until the desired hour is displayed.
If there is any abnormality in the connection of the
outdoor temperature sensor, "– –°C" will appear on the
display. If "– –°C" appears on the display, contact any
authorized Toyota dealer or service center, or another
properly qualified and equipped professional.
After 5 seconds or more without operating the knob, the
minute hand will flash. Then you can set the minutes.
Press the setting knob until the desired minute is displayed.
When the outside temperature drops below 3°C during
driving, the temperature display will flash for 5 seconds to
indicate that the outside temperature is low. However, if
the temperature is already 3°C or lower, the display will
not flash when the ignition is switched on.
After 10 seconds or more of no knob operation, the pointer
returns to normal display.
The key must be in the "ON" position.
If the power source has been disconnected from the
clock, the clock display will automatically be set to 12:00
(twelve o'clock).