Machine Translated by Google
USER MAINTENANCE: Electrical components
392
Refilling the washer fluid
If the new fuse blows immediately after replacement, the
problem is in the electrical system.
Have the system repaired as soon as possible by any
authorized Toyota dealer or service center, or another
properly qualified and equipped professional.
WARNING
Never use a fuse with a higher current rating or
any other object in place of the fuse, as this could
result in significant damage and the possibility of
a fire.
If none of the washers are working, the washer tank
may be empty. Top up the washer fluid.
Loosen the tank cap. Hold your finger on the hole in the
middle and lift the cap. Check the liquid level in the tube
attached to the cap. If the fluid level is extremely low,
add washer fluid.
You can use ordinary water for the washers. However,
in areas where temperatures frequently drop below
freezing, use a washer fluid containing antifreeze. You
can get this product from any authorized dealer or Toyota
service center or from another properly qualified and
equipped specialist. Follow the manufacturer's instructions
when mixing the solution with water.
NOTICE
Do not use engine cooling antifreeze or any other
substitute as this could damage the vehicle's
paintwork.
English 