Get Vehicle specifications Guide for Toyota Aygo SUV Second Generation (2015-2021)

469

Vehicle specifications

9

9-1. Specifications

Maintenance data

(fuel, oil level, etc.)...........470

Fuel information.................481

9-2. Customization

Customizable features.......483

9-3. Items to initialize

Items to initialize ................484

470

9-1. Specifications

Maintenance data (fuel, oil level, etc.)

Dimensions

Overall length

Overall width

3465 mm (136.4 in.)

1615 mm (63.6 in.)

1460 mm (57.5 in.)

Overall height*¹

Wheelbase

1480 mm (58.3 in.)*²

2340 mm (92.1 in.)

1425 mm (56.1 in.)

Front

Rear

1420 mm (55.9 in.)*²

Tread

1420 mm (55.9 in.)

Gross vehicle mass

1240 kg (2733 lb.)

Front

Rear

Maximum permissible

axle capacity

695 kg (1532 lb.)

*¹: Unladen vehicle

*²: Vehicles with raised vehicle height

471

9-1. Specifications

Vehicle identification number

The vehicle identification number (VIN) is the legal identifier for your

vehicle. This is the primary identification number for your Toyota. It is

used in registering the ownership of your vehicle.

This number is stamped under the

right-hand front seat.

 3-door models

This number is also on the manu-

facturer’s label on the right-hand

side center pillar.

 5-door models

This number is also on the manu-

facturer’s label on the right-hand

side rear pillar.

9

472

9-1. Specifications

Engine

Model

1KR-FE

Type

3-cylinder in line, 4-cycle, gasoline

71.0  84.0 mm (2.79  3.30 in.)

998 cm³(60.9 cu.in.)

Bore and stroke

Displacement

Valve clearance

(engine cold)

Intake: 0.145  0.235 mm (0.006  0.009 in.)

Exhaust: 0.275  0.365 mm (0.011  0.014 in.)

Drive belt tension

Automatic adjustment

Fuel

When you find these types of fuel label at the gas

station, use only the fuel with one of the following

labels.

Fuel type

EU area:

Unleaded gasoline conforming to European stan-

dard EN228 only

Except EU area:

Unleaded gasoline only

Research octane

number

95 or higher

Fuel tank capacity

(Reference)

35 L (9.2 gal., 7.7 Imp.gal.)

Lubrication system

Oil capacity

(Drain and refill  reference*)

With filter

2.8 L (3.0 qt., 2.5 Imp.qt.)

2.6 L (2.7 qt., 2.3 Imp.qt.)

Without filter

*: The engine oil capacity is a reference quantity to be used when changing

the engine oil. Warm up and turn off the engine, wait more than 5 minutes,

and check the oil level on the dipstick.

473

9-1. Specifications

■ Engine oil selection

“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota

recommends the use of approved “Toyota Genuine Motor Oil”.

Another motor oil of matching quality can also be used.

Oil grade:

0W-16:

API grade SN “Resource-Conserving” or SN PLUS “Resource-Con-

serving” multigrade engine oil

0W-20, 5W-30 and 10W-30:

API grade SL “Energy-Conserving”, SM “Energy-Conserving”, SN

“Resource-Conserving” or SN PLUS “Resource-Conserving”; or

ILSAC multigrade engine oil

15W-40:

API grade SL, SM, SN or SN PLUS multigrade engine oil

Recommended viscosity (SAE):

SAE 0W-16 is filled into your

Toyota vehicle at manufactur-

Preferred

ing, and the best choice for

good fuel economy and good

starting in cold weather.

If SAE 0W-16 oil is not avail-

able, SAE 0W-20 oil may be

used. However, it should be

replaced with SAE 0W-16 at the

next oil change.

Temperaturerange anticipated

If you use SAE 10W-30 or a

higher viscosity engine oil in

extremely low temperatures,

the engine may become difficult

to start, so SAE 0W-16, 0W-20

or 5W-30 engine oil is recom-

mended.

before next oil change

9

474

9-1. Specifications

Oil viscosity (0W-16 is explained here as an example):

ꢀ The 0W in 0W-16 indicates the characteristic of the oil which

allows cold startability. Oils with a lower value before the W allow

for easier starting of the engine in cold weather.

ꢀ The 16 in 0W-16 indicates the viscosity characteristic of the oil

when the oil is at high temperature. An oil with a higher viscosity

(one with a higher value) may be better suited if the vehicle is

operated at high speeds, or under extreme load conditions.

How to read oil container labels:

Either or both API registered marks are added to some oil contain-

ers to help you select the oil you should use.

1

API Service Symbol

Top portion: “API SERVICE SN”

means the oil quality designa-

tion by American Petroleum

Institute (API).

Center portion: “SAE 0W-16”

means the SAE viscosity grade.

Lower portion: “Resource-Con-

serving” means that the oil has

fuel-saving and environmental

protection capabilities.

2

ILSAC Certification Mark

The International Lubricant Specification Advisory Committee (ILSAC)

Certification Mark is displayed on the front of the container.

475

9-1. Specifications

Cooling system

0Q011,

^0Q021*

3.7 L (3.9 qt., 3.3 Imp.qt.)

Capacity

(Reference)

0Q090*

4.4 L (4.6 qt., 3.9 Imp.qt.)

Use either of the following:

ꢀ “Toyota Super Long Life Coolant”

ꢀ Similar high-quality ethylene glycol-based non-

silicate, non-amine, non-nitrite, and non-borate

coolant with long-life hybrid organic acid tech-

nology

Coolant type

Do not use plain water alone.

*: The identification code is indicated

at the locations shown in the illus-

tration.

On the back side

9

476

9-1. Specifications

Ignition system

Spark plug

Make

DENSO FC16HR-Q8

0.8 mm (0.031 in.)

Gap

NOTICE

■Iridium-tipped spark plugs

Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.

Electrical system

Battery

Open voltage* at

12.3 V or higher

If the specific voltage is lower than the stan-

dard value, charge the battery.

20C (68F):

⁽*: Voltage checked 20 minutes after the

engine and all the lights are turned off)

Charging rates

5 A max.

477

9-1. Specifications

Manual transmission (including front differential)

Gear oil capacity (Reference) 1.7 L (1.8 qt., 1.5 Imp.qt.)

“TOYOTA Genuine Manual Transmission

Gear Oil LV GL-4 75W” or equivalent

Gear oil type

NOTICE

■Manual transmission gear oil

●Please be aware that depending on the particular characteristics of the

gear oil used or the operating conditions, idle sound, shift feeling and/or

fuel efficiency may be different or affected and, in the worst case, damage

to the vehicle’s transmission. Toyota recommends to use “TOYOTA Genu-

ine Manual Transmission Gear Oil LV GL-4 75W” to achieve optimal per-

formance.

●Your Toyota vehicle is filled with “TOYOTA Genuine Manual Transmission

Gear Oil LV GL-4 75W” at the factory. Use Toyota approved “TOYOTA

Genuine Manual Transmission Gear Oil LV GL-4 75W” or an equivalent oil

of matching quality that satisfies the above specifications. Please contact

any authorized Toyota retailer or Toyota authorized repairer, or any reliable

repairer for further details.

Clutch

Clutch pedal wear reserve stroke

Remaining stroke

28  48 mm (1.1  1.9 in.)

38.1  62.1 mm (1.5  2.4 in.)

9

478

9-1. Specifications

Brakes

Left-hand

drive vehicles

94 mm (3.7 in.) Min.

93 mm (3.6 in.) Min.

Pedal clearance*¹

Pedal free play

Right-hand

drive vehicles

1  6 mm (0.04  0.24 in.)

5  8 clicks

Parking brake lever travel*²

Fluid type

SAE J1704 or FMVSS No. 116 DOT 4

*¹: Minimum pedal clearance when depressed with a force of 300 N (30.6 kgf,

67.4 lbf) while the engine is operating.

*²^{: Parking brake lever travel when pulled up with a force of 196 N (20 kgf,}

44 lbf).

Steering

Free play

Less than 30 mm (1.2 in.)

165/65R14 79T

Tires and wheels

 14-inch tires (type A)*

Tire size

Tire inflation pressure

(Recommended cold tire

inflation pressure)

Front: 230 kPa (2.3 kgf/cm²or bar, 33 psi)

Rear: 230 kPa (2.3 kgf/cm²or bar, 33 psi)

Wheel size

14  4 1/2J

Wheel bolt torque

103 N·m (10.5 kgf·m, 76 ft·lbf)

479

9-1. Specifications

 14-inch tires (type B)*

Tire size

165/65R14 79T

Tire inflation pressure

(Recommended cold tire

inflation pressure)

Front: 220 kPa (2.2 kgf/cm²or bar, 32 psi)

Rear: 220 kPa (2.2 kgf/cm²or bar, 32 psi)

Wheel size

14  4 1/2J

Wheel bolt torque

103 N·m (10.5 kgf·m, 76 ft·lbf)

 15-inch tires

Tire size

165/60R15 77H

Front: Vehicles without a Stop & Start system

230 kPa (2.3 kgf/cm²or bar, 33 psi)

Vehicles with a Stop & Start system

240 kPa (2.4 kgf/cm²or bar, 35 psi)

Rear: 230 kPa (2.3 kgf/cm²or bar, 33 psi)

Tire inflation pressure

(Recommended cold tire

inflation pressure)

Wheel size

15  4 1/2J

Wheel bolt torque

103 N·m (10.5 kgf·m, 76 ft·lbf)

 Compact spare tires (if equipped)

Tire size

T125/70R15 95M, T125/70D15 95M

Tire inflation pressure

(Recommended cold tire 420 kPa (4.2 kgf/cm²or bar, 60 psi)

inflation pressure)

Wheel size

15  4B

Wheel bolt torque

103 N·m (10.5 kgf·m, 76 ft·lbf)

*: The tire inflation pressure is indi-

cated on the left-side center pillar.

9

480

9-1. Specifications

Light bulbs

W

55

19

21

16

21

5

Type

A

Headlights

Front fog lights*

B

Front turn signal lights

C

Stop lights

C

Exterior

Rear turn signal lights

Back-up light

D

E

Rear fog light

E

License plate lights

High mounted stoplight

Interior light

E

5

E

5

E

Interior

Luggage compartment light

5

F

A: HIR2 halogen bulbs

B: H16 halogen bulbs

C: Single end bulbs (clear)

D: Single end bulbs (amber)

E: Wedge base bulbs (clear)

F: Double end bulbs (clear)

*

481

9-1. Specifications

Fuel information

When you find these types of fuel label at the gas station, use

only the fuel with one of the following labels.

EU area:

You must only use unleaded gasoline conforming to European

standard EN228.

Select unleaded gasoline with a Research Octane Number of 95

or higher for optimum engine performance.

Except EU area:

You must only use unleaded gasoline.

Select unleaded gasoline with a Research Octane Number of 95

or higher for optimum engine performance.

■Use of ethanol blended gasoline in a gasoline engine

Toyota allows the use of ethanol blended gasoline where the ethanol content

is up to 10%. Make sure that the ethanol blended gasoline to be used has a

Research Octane Number that follows the above.

■If your engine knocks

●Consult any authorized Toyota retailer or Toyota authorized repairer, or any

reliable repairer.

●You may occasionally notice light knocking for a short time while accelerat-

ing or driving uphill. This is normal and there is no need for concern.

9

482

9-1. Specifications

NOTICE

■Notice on fuel quality

●Do not use improper fuels. If improper fuels are used, the engine will be

damaged.

●Do not use gasoline with metallic additives, for example manganese, iron

or lead, otherwise it may cause damage on your engine or emission con-

trol system.

●Do not add aftermarket fuel additives which contain metallic additives.

●EU area: Bioethanol fuel sold under names such as “E50” or “E85” and

fuel containing a large amount of ethanol should not be used. The use of

these fuels will damage the vehicle’s fuel system. In case of any doubt,

ask any authorized Toyota retailer or Toyota authorized repairer, or any

reliable repairer.

●Except EU area: Bioethanol fuel sold under names such as “E50” or “E85”

and fuel containing a large amount of ethanol should not be used. Your

vehicle can use gasoline mixed with 10% max ethanol. The use of fuel

with more than 10% ethanol content (E10) will damage the vehicle’s fuel

system. You must ensure that refueling is carried out only from a source

where fuel specification and quality can be guaranteed. In case of any

doubt, ask any authorized Toyota retailer or Toyota authorized repairer, or

any reliable repairer.

●Do not use the methanol blended gasoline such as M15, M85, M100.

The use of gasoline containing methanol may cause engine damage or

failure.

483

9-2. Customization

Customizable features

Your vehicle includes a variety of electronic features that can be

personalized to suit your preferences. Programming these pref-

erences requires specialized equipment and may be performed

by any authorized Toyota retailer or Toyota authorized repairer,

or any reliable repairer.

Default

setting

Customized

Item

Function

setting

Smart entry & start

Smart entry & start system

On

Off

system (P. 127)

*

Automatic light

control system

(P. 197)

Light sensor sensitivity

Standard

-2 to 2

*

9

484

9-3. Items to initialize

Items to initialize

The following item must be initialized for normal system opera-

tion after such cases as the battery being reconnected, or main-

tenance being performed on the vehicle:

Item

When to initialize

Reference

P. 372

Tire pressure warning

system*

When changing the tire size

*

Vehicle specifications for Your Toyota Aygo SUV Second Generation (2015-2021)

Related Topics

Popular Owner Manuals

Latest Owner Manuals