Get Instrument cluster -> Drive monitor display Guide for Toyota Aygo SUV Third Generation (2022-2026)

105

2. Instrument cluster

Drive monitor display

Display contents

The drive monitor display presents the driver with a variety of driving-

related data including the current outside air temperature.

● Outside temperature display

(P. 375)

● Trip information (P. 105)

2

Displays driving range, fuel con-

sumption and other cruising related

information

● Instrument cluster light control

(P. 108)

● Shift position (vehicles with a multi-mode manual transmission)

Displays the selected shift position (P. 222)

● Speed limiter display (if equipped) (P. 269)

Trip information

■ Switching the display

Items

displayed

can

be

switched by pushing one of the

“DISP” buttons.

1

Forward

2

Backward

■ Odometer

Displays the total distance the vehicle has been driven.

AYGO_OM_Europe_OM9A012E

106

2. Instrument cluster

■ Trip meters “A” and “B”

Displays the distance the vehicle has been driven since the meter

was last reset. Trip meters “A” and “B” can be used to record and

display different distances independently.

Push and holding one of the “DISP” buttons will reset the trip meter that

is currently displayed.

■ Stop & Start system operation time (if equipped)

● Displays the amount of time the engine was stopped due to oper-

ation of the Stop & Start system during the current trip.

Vehicles without a smart entry & start system: From the engine switch in

the “ON” position to the engine switch in the “LOCK” position.

Vehicles with a smart entry & start system: From the engine switch in

IGNITION ON mode to the engine switch off.

● When the Stop & Start system is operating, the presently dis-

played screen is interrupted and the Stop & Start system opera-

tion time automatically displayed.

• Push one of the “DISP” buttons to return to the previous screen.

• The automatically displayed function of the Stop & Start system oper-

ation time activated or deactivated switch over method. (P. 108)

■ Stop & Start system total operation time (if equipped)

Displays the total amount of time that the engine has been stopped

due to operation of the Stop & Start system since the system was

last reset.

Push and hold one of the “DISP” buttons to reset.

■ Outside temperature (vehicles with a multi-mode manual

transmission)

Displays the outside temperature. (P. 375)

■ Current fuel consumption

Displays the current rate of fuel consumption.

AYGO_OM_Europe_OM9A012E

107

2. Instrument cluster

■ Average fuel consumption

Displays the average fuel consumption since the function was

reset.

• The function can be reset by pushing one of the “DISP” buttons for lon-

ger than 1 second when the average fuel consumption is displayed.

• Use the displayed average fuel consumption as a reference.

■ Driving range

Displays the estimated approximate distance that can be driven

with the quantity of fuel remaining.

• This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

2

• When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch to the “LOCK” position (vehicles

without a smart entry & start system) or off (vehicles with a smart entry

& start system). If the vehicle is refueled without turning the engine

switch to the “LOCK” position or off, the display may not be updated.

• The display shows “LoFUEL” when the remaining is very low.

■ Average vehicle speed

Displays the average vehicle speed since the function was reset.

The function can be reset by pushing one of the “DISP” button for longer

than 1 second when the average vehicle speed is displayed.

■ Instrument cluster light control

Displays the instrument cluster light control display.

• This screen is only displayed when the tail lights are on.

• The brightness of the instrument cluster light can be adjusted.

(P. 108)

AYGO_OM_Europe_OM9A012E

108

2. Instrument cluster

Stop & Start system operation time customization (if equipped)

The automatically displayed function of the Stop & Start system oper-

ation time can be activated or deactivated.

Push one of the “DISP” buttons and the Stop & Start system opera-

tion time is displayed, while the vehicle is stopped.

Push and hold the “DISP” buttons for 5 seconds.

Push the “DISP” buttons to

switch activate or deactivate.

1

Activated

2

Deactivated

The screen will change back to the

previous screen after 6 seconds or

by push and holding one of the

“DISP” buttons for 2 seconds.

Instrument cluster light control

Push the one of the “DISP” buttons and the instrument cluster light

control display while the tail lights is turned on and vehicle is

stopped.

Push and hold one of the “DISP” buttons until instrument cluster

light control display flashes.

Push one of the “DISP” buttons.

1

Brighter

2

Darker

The illumination level can be set by

push and holding one of the “DISP”

buttons, turning off the tail lights, or

automatically 6 seconds after the

last button push has elapsed.

AYGO_OM_Europe_OM9A012E

109

2. Instrument cluster

■When disconnecting and reconnecting battery terminals

The following information data will be reset:

●Trip meters “A” and “B”

●Stop & Start system total operation time (if equipped)

●Average fuel consumption

●Average vehicle speed

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

2

WARNING

■The information display at low temperatures (vehicles with a multi-

mode manual transmission)

Allow the interior of the vehicle to warm up before using the liquid crystal

information display. At extremely low temperatures, the information display

monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver's shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or serious injury.

■Cautions during setting up the display

As the engine needs to be operating during setting up the display, ensure

that the vehicle is parked in a place with adequate ventilation. In a closed

area such as a garage, exhaust gases including harmful carbon monoxide

(CO) may collect and enter the vehicle. This may lead to death or a serious

health hazard.

NOTICE

■The information display at low temperatures (vehicles with a manual

transmission)

Allow the interior of the vehicle to warm up before using the liquid crystal

information display. At extremely low temperatures, the information display

monitor may respond slowly, and display changes may be delayed.

AYGO_OM_Europe_OM9A012E

110

2. Instrument cluster

AYGO_OM_Europe_OM9A012E

Instrument cluster -> Drive monitor display for Your Toyota Aygo SUV Third Generation (2022-2026)

Related Topics

Instrument cluster

Popular Owner Manuals

Latest Owner Manuals