Before driving -> Opening, closing the windows for Your Toyota bZ4X SUV First Generation (2022-2024)

212  
4-5. Opening, closing the windows  
window frame while the side window  
4-5.Opening, closing the windows  
Power windows  
is closing, side window movement is  
stopped and the side window is  
opened slightly.  
Opening and closing the  
power windows  
Catch protection function  
If an object becomes caught  
between the door and side window  
while the side window is opening,  
side window movement is stopped.  
The power windows can be  
opened and closed using the  
switches.  
When the power window cannot  
be opened or closed  
Operating the switch moves the  
side windows as follows:  
When the jam protection function or  
catch protection function operates  
unusually and the side window can-  
not be opened and closed, perform  
the following operations with the  
power window switch of that door.  
Stop the vehicle. With the power  
switch in ON, within 4 seconds of  
the jam protection function or  
catch protection function activat-  
ing, continuously operate the  
power window switch in the one-  
touch closing direction or one-  
touch opening direction so that the  
side window can be opened and  
closed.  
1 Closing  
2 One-touch closing*  
3 Opening  
If the side window cannot be  
opened and closed even when  
performing the above operations,  
perform the following procedure  
for function initialization.  
4 One-touch opening*  
*
: To stop the side window partway,  
operate the switch in the opposite  
direction.  
1 Turn the power switch to ON.  
2 Pull and hold the power window  
switch in the one-touch closing  
direction and completely close  
the side window.  
The power windows can be  
operated when  
3 Release the power window  
switch for a moment, resume  
pulling the switch in the one-  
touch closing direction, and hold  
it there for approximately 6 sec-  
onds or more.  
The power switch is in ON.  
Operating the power windows  
after turning the EV system off  
The power windows can be oper-  
ated for approximately 45 seconds  
even after the power switch is  
turned to ACC or OFF. They cannot,  
however, be operated once either  
front door is opened.  
4 Press and hold the power win-  
dow switch in the one-touch  
opening direction. After the side  
window is completely opened,  
continue holding the switch for  
an additional 1 second or more.  
Jam protection function  
If an object becomes jammed  
between the side window and the  
Owner's Manual_USA_M42G23_en  
213  
4-5. Opening, closing the windows  
WARNING  
5 Release the power window  
switch for a moment, resume  
pushing the switch in the one-  
touch opening direction, and  
hold it there for approximately 4  
seconds or more.  
Observe the following precau-  
tions.  
Failing to do so may result in  
death or serious injury.  
6 Pull and hold the power window  
switch in the one-touch closing  
direction again. After the side  
window is completely closed,  
continue holding the switch for a  
further 1 second or more.  
Closing the power windows  
The driver is responsible for all  
the power window operations,  
including the operation for the  
passengers. In order to prevent  
accidental operation, especially  
by a child, do not let a child  
operate the power windows. It is  
possible for children and other  
passengers to have body parts  
caught in the power window.  
Also, when riding with a child, it  
is recommended to use the win-  
dow lock switch. (P.214)  
If you release the switch while the  
side window is moving, start again  
from the beginning.  
If the side window reverses and  
cannot be fully closed or opened,  
have the vehicle inspected by your  
Toyota dealer.  
Door lock linked power window  
operation  
4
Check to make sure that all pas-  
sengers do not have any part of  
their body in a position where it  
could be caught when a power  
window is being operated.  
The power windows can be  
opened and closed using the  
*
mechanical key. (P.542)  
The power windows can be  
opened using the wireless remote  
*
control. (P.167)  
The alarm may be triggered if the  
alarm is set and the power window  
is closed using the door lock  
linked power window operation  
function. (P.69)  
*
: These settings must be custom-  
ized at your Toyota dealer.  
When using the wireless remote  
control or mechanical key and  
operating the power windows,  
operate the power window after  
checking to make sure that  
there is no possibility of any  
passenger having any of their  
body parts caught in the side  
window. Also, do not let a child  
operate the power window by  
the wireless remote control or  
mechanical key. It is possible for  
children and other passengers  
to get caught in the power win-  
dow.  
Power window open reminder  
function  
The buzzer sounds and a message  
is shown on the multi-information  
display when the power switch is  
turned to OFF and the driver’s door  
is opened with the power windows  
open.  
Customization  
Some functions can be customized.  
(Customizable features: P.573)  
Owner's Manual_USA_M42G23_en  
214  
4-5. Opening, closing the windows  
locked.  
WARNING  
The passenger windows can still be  
When exiting the vehicle, turn  
the power switch to OFF, carry  
the key and exit the vehicle  
along with the child. There may  
be accidental operation, due to  
mischief, etc., that may possibly  
lead to an accident.  
opened and closed using the  
driver’s switch even if the lock  
switch is on.  
Jam protection function  
Never use any part of your body  
to intentionally activate the jam  
protection function.  
The jam protection function may  
not work if something gets  
jammed just before the side  
window is fully closed. Be care-  
ful not to get any part of your  
body jammed in the side win-  
dow.  
The window lock switch can be  
operated when  
The power switch is in ON.  
Catch protection function  
When the 12-volt battery is dis-  
connected  
Never use any part of your body  
or clothing to intentionally acti-  
vate the catch protection func-  
tion.  
The window lock switch is disabled.  
If necessary, press the window lock  
switch after reconnecting the 12-volt  
battery.  
The catch protection function  
may not work if something gets  
caught just before the side win-  
dow is fully opened. Be careful  
not to get any part of your body  
or clothing caught in the side  
window.  
Preventing accidental  
operation (window lock  
switch)  
This function can be used to  
prevent children from acciden-  
tally opening or closing a pas-  
senger window.  
Press the switch.  
The indicator  
will come on and  
the passenger windows will be  
Owner's Manual_USA_M42G23_en