Maintenance and care -> Wheels for Your Toyota bZ4X SUV Second Generation (2025-2026)

493  
7-3. Do-it-yourself maintenance  
Wheels  
WARNING  
When replacing wheels  
If a wheel is bent, cracked  
or heavily corroded, it  
should be replaced. Other-  
wise, the tire may separate  
from the wheel or cause a  
loss of handling control.  
Do not use wheels that are a dif-  
ferent size from those recom-  
mended in the Owner’s Manual,  
as this may result in a loss of  
handling control.  
Never use an inner tube in a  
leaking wheel which is designed  
for a tubeless tire. Doing so may  
result in an accident, causing  
death or serious injury.  
Wheel selection  
Wheel bolts  
When replacing wheels, care  
should be taken to ensure that  
they are equivalent to those  
removed in load capacity, diam-  
Observe the following precautions  
to reduce the risk of death or seri-  
ous injury:  
Do not over tighten.  
eter, rim width and inset*.  
Never use oil or grease on the  
wheel bolts. Oil and grease may  
cause the wheel bolts to be  
excessively tightened, leading  
to bolt or disc wheel damage. In  
addition, the oil or grease can  
cause the wheel bolts to loosen  
and the wheel may fall off, caus-  
ing a serious accident. Remove  
any oil or grease from the wheel  
bolts.  
Replacement wheels are avail-  
able at your Toyota dealer.  
*
: Conventionally referred to as off-  
set.  
Toyota does not recommend  
using the following:  
7
Wheels of different sizes or  
types  
If there are any cracks or defor-  
mations in the wheel bolts, or if  
the surface treatment becomes  
worn, have the wheel bolts  
replaced at your Toyota dealer.  
Failure to follow these precau-  
tions could cause the wheel  
bolts to loosen and the tire to fall  
off, resulting in death or serious  
injury.  
Used wheels  
Bent wheels that have been  
straightened  
When replacing wheels  
The wheels of your vehicle are  
equipped with tire pressure warning  
valves and transmitters that allow  
the tire pressure warning system to  
provide advance warning in the  
event of a loss in tire inflation pres-  
sure. Whenever wheels are  
Use of defective wheels pro-  
hibited  
Do not use cracked or deformed  
wheels.  
replaced, tire pressure warning  
valves and transmitters must be  
installed. (P.476)  
Doing so could cause the tire to  
leak air during driving, possibly  
causing an accident.  
Owners Manual_USA_M42C01_en  
494  
7-3. Do-it-yourself maintenance  
Air conditioning filter  
NOTICE  
Replacing tire pressure warn-  
ing valves and transmitters  
The air conditioning filter  
must be changed regularly  
to maintain air conditioning  
efficiency.  
Because tire repair or replace-  
ment may affect the tire pres-  
sure warning valves and  
transmitters, make sure to have  
tires serviced by your Toyota  
dealer or other qualified service  
shop. In addition, make sure to  
purchase your tire pressure  
warning valves and transmit-  
ters at your Toyota dealer.  
Removal method  
1 Turn the power switch off.  
Confirm that the charging connec-  
tor is not connected. Also, do not  
use the Remote Air Conditioning  
System during the procedure.  
Ensure that only genuine Toyota  
wheels are used on your vehi-  
cle.  
Tire pressure warning valves  
and transmitters may not work  
properly with non-genuine  
wheels.  
2 Open the front passenger’s  
door.  
By keeping the door open, unex-  
pected operation of the Remote Air  
Conditioning System can be pre-  
vent. (P.409)  
Aluminum wheel precau-  
tions  
3 While pressing the claw, hold  
Use only Toyota wheel bolts  
and wrenches designed for  
use with your aluminum  
wheels.  
handle  
and remove the  
panel.  
When rotating, repairing or  
changing your tires, check  
that the wheel bolts are still  
tight after driving 1000 miles  
(1600 km).  
Be careful not to damage the  
aluminum wheels when using  
tire chains.  
Use only Toyota genuine bal-  
ance weights or equivalent  
and a plastic or rubber ham-  
mer when balancing your  
wheels.  
Owners Manual_USA_M42C01_en