2025-2026 Toyota bZ4X SUV Vehicle status information and indicators -> Gauges and meters User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Vehicle status information and indicators -> Gauges and meters for Your Toyota bZ4X SUV Second Generation (2025-2026)

152  
3-1. Instrument cluster  
Gauges and meters  
The meters display various drive information.  
Meter display  
Locations of gauges and meters  
The units of measure may differ depending on the intended destination of  
the vehicle.  
Multi-information display  
Presents the driver with a variety of vehicle data (P.155)  
Displays warning messages if a malfunction occurs (P.522)  
Display/hide for the multi-information display can be changed. (P.154)  
Outside temperature  
Displays the outside temperature within the range of -40°F (-40°C) to 140°F  
(60°C)  
Power meter (P.153)  
Displays EV system output or regeneration level  
Speedometer  
Displays the vehicle speed  
Clock (P.154)  
Shift position indicator (P.236)  
SOC (State of Charge) gauge  
Displays the amount of charge remaining in the traction battery.  
Owners Manual_USA_M42C01_en  
153  
3-1. Instrument cluster  
Driving range  
Displays driving range with remaining charge. (P.236)  
When the air conditioning system is operating,  
and the driving range  
with the air conditioning system on are displayed.  
Odometer and trip meter display (P.154)  
• When the temperature of the trac-  
tion batter is extremely high or  
extremely low  
Power meter  
Output restrictions reference dis-  
*2  
play  
3
In the following situations, the out-  
put is restricted, and the references  
for those restrictions are displayed  
in the power area.  
• When the traction battery has a  
low amount of charge and can no  
longer output power  
• When the temperature of the trac-  
tion batter is extremely high or  
extremely low  
Charge area  
*1  
:The meaning of “Regeneration”  
*1  
here means converting kinetic  
energy into electrical energy.  
Shows regeneration status.  
Regenerated energy will be used to  
charge the EV battery (traction bat-  
tery).  
*2  
:The actual restrictions may differ  
depending on the vehicle condi-  
tion.  
Power area  
Outside temperature display  
Displays the EV system output  
(acceleration force) while driving.  
In the following situations, the cor-  
rect outside temperature may not  
be displayed, or the display may  
take longer than normal to  
change:  
• When stopped, or driving at low  
speeds (less than 16 mph [25  
km/h])  
• When the outside temperature  
has changed suddenly (at the  
entrance/exit of a garage, tunnel,  
etc.)  
*1  
Regeneration restrictions refer-  
*2  
ence display  
In the following situations, regenera-  
tive braking is restricted, and the ref-  
erences for those restrictions are  
displayed in the charge area.  
• When the traction battery has a  
large amount of charge and can  
no longer be regenerated  
When “--” is displayed, the system  
may be malfunctioning. Take your  
Owners Manual_USA_M42C01_en  
154  
3-1. Instrument cluster  
vehicle to your Toyota dealer.  
Odometer and trip meter  
display  
When the outside temperature is  
approximately 37°F (3°C) or  
lower, the indicator  
will flash  
Display items  
Odometer  
for approximately 10 seconds,  
then stay on.  
Displays the total distance the vehi-  
cle has been driven.  
Liquid crystal display  
P.156  
Trip meter A/Trip meter B  
Customization  
Displays the distance the vehicle  
has been driven since the meter  
was last reset. Trip meters A and B  
can be used to record and display  
different distances independently.  
The gauges and meters can be cus-  
tomized in  
of the multi-informa-  
tion display. (P.566)  
WARNING  
Switching the display  
The information display at  
low temperatures  
The display switches each time  
the switch is pressed. Also,  
when the switch is continuously  
pressed during the trip meter  
display, the driving distance can  
be changed to “0”.  
Allow the interior of the vehicle to  
warm up before using the liquid  
crystal information display. At  
extremely low temperatures, the  
information display monitor may  
respond slowly, and display  
changes may be delayed.  
Switching the meter dis-  
play  
The multi-information display  
can be switched between dis-  
play and hidden.  
Adjusting the clock  
The clocks on the following can  
be adjusted on the audio system  
screen.  
Multi-information display  
Audio system screen  
For details, refer to “MULTIME-  
DIA OWNER’S MANUAL”.  
Owners Manual_USA_M42C01_en  

Related Topics

Popular Owner Manuals