Get Car audio system and Air conditioning system -> Using your audio system: controls and features Guide for Toyota Celica 2 Door Sixth Generation (1993-1999)

CELICA

U

—Using your audio system:

controls and features

"Type 1

Details of specific buttons, controls, and

features are described in the alphabetical

listing that follows.

80

CELICA

U

1 2 3 4 5 6 (Preset buttons)

AM

(Reverse/Fast forward buttons)

Cassette Player

These buttons are used to preset and

tune in radio stations.

Push “AM” to switch the AM band. “AM”

will appear on the display.

Push the fast forward button to fast for-

ward a cassette tape. “FF” will appear on

the display. Push the reverse button to

rewind a tape. “REW” will appear on the

display.

To preset a station to a button: Tune in

the desired station (see “TUNE” button).

Push and hold down the button until you

hear a beepthis will set the station to

the button. The button number will appear

on the display.

If the audio system is off, you can turn

on the radio by pushing “AM”. Also, push

“AM” to switch from cassette or compact

disc operation to radio operation.

AUDIO CONTROL / MODE

To stop the tape while it is fast forward-

ing, push the fast forward button or

“TAPE”; to stop the tape while it is re-

winding, push the reverse button or

“TAPE”.

Manual tone adjustment function—

To tune in to a preset station: Push the

button for the station you want. The but-

ton number and station frequency will ap-

pear on the display.

This knob is used to adjust the tone

manually.

For low−pitch tone adjustment, push

If a tape side rewinds completely, the cas-

sette player will stop and then play that

same side. If a tape fast forwards com-

pletely, the cassette player will play the

other side of the tape, using the auto−re-

verse feature.

“AUDIO CONTROL

until “BAS” appears on the display. Then

turn the knob to suit your preference.

/

MODE” repeatedly

These systems can store one AM and two

FM stations for each button (The display

will show “AM”, “FM1” or “FM2” when you

push ”AM” or “FM”).

The display will show the range from

“BAS −5” to “BAS 5”.

(Eject button)

For high−pitch tone adjustment, push

“AUDIO CONTROL

Compact Disc Player

Push this button to eject a cassette.

/

MODE” repeatedly

If you want to fast forward or reverse

through a compact disc track, push and

hold in the fast forward or reverse button.

When you release the button, the compact

disc player will resume playing.

After you turn the ignition to “LOCK”, you

will be able to eject a cassette but you

will not be able to reinsert it.

until “TRE” appears on the display. Then

turn the knob to suit your preference.

The display will show the range from

“TRE −5” to “TRE 5”.

81

CELICA

U

Sound balance adjustment function—

CD (Compact Disc)

If “Err 2” appears on the display, it

indicates no disc is loaded inside the

magazine, insert a disc.

This knob is also to adjust the sound

balance between the front and rear, and

the right and left speakers.

Push “CD” to switch from radio or cas-

sette operation to compact disc operation.

If the audio system is off, you can turn

on the compact disc player by pushing

“CD”. In both cases, a disc must already

be loaded in the player.

If “Err 3” or “Err 4” on the display, it

indicates there is a trouble inside the sys-

tem. Eject the disc or magazine. Set the

disc or magazine again.

For front/rear adjustment, push “AUDIO

CONTROL / MODE” repeatedly until “FAd”

appears on the display. Then turn the

knob to adjust the front/rear balance.

When the audio is set into compact disc

operation, the display shows the track or,

track and disc number currently being

played. Each time you push “CD”, the

system changes between single disc play-

er and automatic changer.

If “OPEn” appears on the display, it

indicates the compact disc auto changer

lid is open. Close the compact disc auto

changer lid.

The display will show the range from “FAd

F7” to “FAd R7”.

For left/right adjustment, push “AUDIO

CONTROL / MODE” repeatedly until “BAL”

appears on the display. Then turn the

knob to adjust the left/right balance.

If the malfunction is not recovered, take

your vehicle to your Toyota dealer.

Your audio system shows six different dis-

play if the player malfunctions.

^DISC∨∧

The display will show the range from “BAL

L7” to “BAL R7”.

Compact disc auto changer only—

If “WAIT” appears on the display, it indi-

cates inside the player unit may be too

hot due to the very high ambient tempera-

ture. Remove the disc or magazine from

the player and allow the player to cool

down.

By using this button, you can select a

disc you wish to listen to.

Push the either side of the button until the

number of the disc you want to listen to

appears on the display.

If “Err 1” appears on the display, it

indicates the disc is dirty, damaged, or it

was inserted up−side down. Clean the

disc or insert it correctly.

82

CELICA

U

FM

RAND (Random)

∗

Dolbyr

B NR

Push “FM” to switch the FM band. “FM1”

or “FM2” will appear on the display. This

system allow you to set twelve FM sta-

tions, two for each button.

There are two random features—you can

either listen to the tracks on all the com-

pact discs in the magazine in random or-

der, or only listen to the tracks on a

specific compact disc in random order.

If you are listening to a tape that was

recorded with Dolbyr B Noise Reduction,

push the button marked with the double−D

symbol. The double−D symbol will appear

on the display. Push the button again to

turn off Dolbyr B NR.

If the audio system is off, you can turn

on the radio by pushing “FM”. Also, push

“FM” to switch from cassette or compact

disc operation to radio operation.

Random playing for the tracks on a disc:

Quickly push and release “RAND”. “RAND”

will appear on the display and the disc

you are listening to in random order. If

you hear a beep, you held the button too

long, and the player will play all the

tracks in the magazine in random order.

To turn off the random feature, push the

“RAND” a second time.

The Dolby NR mode reduces tape noise

by about 10 dB. For best sound reproduc-

tion, play your tapes with this button on

or off according to the mode used for

recording the tape.

PROG (Program)

Push ”PROG” to select the other side of

a

cassette tape. The display indicates

∗

: Dolby noise reduction manufactured under license from

which side is currently selected (” ” indi-

Dolby Laboratories Licensing Corporation. ”DOLBY” and the

cates top side,

side).

”

indicates bottom

double D symbol

are trademarks of Dolby Laboratories

Licensing Corporation.

Compact disc auto changer only—

Auto−reverse feature: After the cassette

player reaches the end of a tape side, it

automatically reverses and begins to play

the other side. This is true whether the

cassette was playing or fast forwarding.

Random playing for all the tracks in the

magazine:

Push and hold “RAND” until you hear a

beep. “D·RAND” will appear on the dis-

play and the player will perform all the

tracks on all the discs in the magazine in

random order. To turn off the random fea-

ture, push “RAND” a second time.

83

CELICA

U

RPT (Repeat)

SCAN

Radio

Compact disc player

There are two repeat features—you can

either replay a disc track or a whole com-

pact disc.

There are two scan features—you can ei-

ther scan the tracks on a specific disc or

scan the first tracks of all the discs in the

magazine.

You can either scan all the frequencies on

a band or scan only the preset stations

for that band.

Repeating a track:

Quickly push and release “RPT” while the

track is playing. “RPT” will appear on the

display. If you hear a beep, you held the

button too long, and the player will repeat

the whole disc. When the track ends, it

will automatically be replayed. This pro-

cess will be continued until you push the

button again to turn off the repeat feature.

Scanning for the tracks on a disc:

To scan all the frequencies:

Quickly push and release “SCAN”. “SCAN”

will appear on the display and the player

will scan all the tracks on the disc you

are listening to. If you hear a beep, you

held the button too long, and the player

will scan the first tracks of all the discs

in the magazine. To select a track, push

the “SCAN” a second time. If the player

scanned all the tracks on the disc, it will

stop scanning.

Quickly push and release “SCAN”. If you

hear a beep, you held the button too long,

and the radio will scan the preset sta-

tions. The radio will find the next station

up the station band, stay there for a few

seconds, and then scan again. To select

a station, push “SCAN” a second time.

Compact disc auto changer only—

To scan the preset stations:

Repeating a disc:

Push and hold “SCAN” until you hear a

beep. The radio will tune in the next pres-

et station up the band, stay there for a

few seconds, and then move to the next

preset station. To select a station, push

“SCAN” a second time.

Push and hold “RPT” until you hear a

beep. “D·RPT” will appear on the display.

The player will repeat all the tracks on the

disc you are listening to. When the disc

ends, the player will automatically go back

to the top track of the disc and replay.

This process will be continued until you

push the button again to turn off the re-

peat feature.

Compact disc auto changer only—

Scanning for the first tracks of all the

discs in the magazine:

Push and hold “SCAN” until you hear a

beep. “D·SCAN” will appear on the display

and the player will perform the first track

of the next disc. To select a disc, push

the “SCAN” a second time. If the player

has scanned all the discs, it will stop

scanning.

84

CELICA

U

ST (Stereo reception) display

TUNE

Your radio automatically changes to stereo

reception when a stereo broadcast is re-

ceived. “ST” appears on the display. If the

signal becomes weak, the radio reduces

the amount of channel separation to prev-

ent the weak signal from creating noise.

If the signal becomes extremely weak, the

radio switches from stereo to mono recep-

tion.

Tuning

Your Toyota has an electronic tuning radio

(ETR). Push and release the “∧” (up) or

“∨” (down) side of “TUNE” to step up or

down the station band. (If you hear

beep, you held the button too long and

the radio will go into the seek mode.)

a

Seeking

In the seek mode, the radio finds and

plays the next station up or down the

station band.

TAPE

Push “TAPE” to switch from radio or com-

pact disc operation to cassette operation.

If the audio system is off, you can turn

on the cassette player by pushing “TAPE”.

In both cases, a cassette must already be

loaded in the player.

To seek a station, push and hold the “∧”

or “∨” side of “TUNE” until you hear a

beep. Do this again to find another sta-

tion.

VOL/PWR (Volume/Power)

TRACK

(Track

up/down

button):

Compact disc player

Push “VOL/PWR” to turn the audio system

on and off. Turn “VOL/PWR” to adjust the

volume.

By using this button, you can skip up or

down to a different track.

Push either side of the track button until

the number of the track you want to listen

to appears on the display. If you want to

return the beginning of the current track,

push the down side of the button one

time, quickly.

85

CELICA

U

"Type 2

Details of specific buttons, controls, and

features are described in the alphabetical

listing that follows.

86

CELICA

U

1 2 3 4 5 6 (Preset buttons)

AUDIO CONTROL / MODE

(Reverse/Fast forward buttons)

These buttons are used to preset and

tune in radio stations.

Manual tone adjustment function—

If you want to fast forward or reverse

through a compact disc track, push and

hold in the fast forward or reverse button.

When you release the button, the compact

disc player will resume playing.

This knob is used to adjust the tone

manually.

To preset a station to a button: Tune in

the desired station (see “TUNE” button).

Push and hold down the button until you

hear a beepthis will set the station to

the button. The button number will appear

on the display.

For low−pitch tone adjustment, push

“AUDIO CONTROL

/

MODE” repeatedly

until “BAS” appears on the display. Then

turn the knob to suit your preference.

AM FM

Push “AM FM” to switch between the AM

and FM bands. “AM”, “FM1” or “FM2” will

appear on the display. These systems al-

low you to set twelve FM stations, two for

each button.

The display will show the range from

“BAS −5” to “BAS 5”.

To tune in to a preset station: Push the

button for the station you want. The but-

ton number and station frequency will ap-

pear on the display.

With middle−pitch tone—

For middle−pitch tone adjustment, push

“AUDIO CONTROL

/

MODE” repeatedly

If the audio system is off, you can turn

on the radio by pushing “AM FM”. Also,

push “AM FM” to switch from compact disc

operation to radio operation.

These systems can store one AM and two

FM stations for each button (The display

will show “AM”, “FM1” or “FM2” when you

push “AM·FM”).

until “MId” appears on the display. Then

turn the knob to suit your preference.

The display will show the range from

“MId −5” to “MId 5”.

(Eject button)

For high−pitch tone adjustment, push

Push this button to eject a compact disc.

“AUDIO CONTROL

/

MODE” repeatedly

until “TRE” appears on the display. Then

turn the knob to suit your preference.

After you turn the ignition to “LOCK”, you

will be able to eject a disc but you will

not be able to reinsert it.

The display will show the range from

“TRE −5” to “TRE 5”.

87

CELICA

U

Sound balance adjustment function—

CD (Compact Disc)

If “Err 2” appears on the display, it

indicates no disc is loaded inside the

magazine, insert a disc.

This knob is also to adjust the sound

balance between the front and rear, and

the right and left speakers.

Push “CD” to switch from radio operation

to compact disc operation. If the audio

system is off, you can turn on the com-

pact disc player by pushing “CD”. In both

cases, a disc must already be loaded in

the player.

If “Err 3” or “Err 4” on the display, it

indicates there is a trouble inside the sys-

tem. Eject the disc or magazine. Set the

disc or magazine again.

For front/rear adjustment, push “AUDIO

CONTROL / MODE” repeatedly until “FAd”

appears on the display. Then turn the

knob to adjust the front/rear balance.

When the audio is set into compact disc

operation, the display shows the track or,

track and disc number currently being

played. Each time you push “CD”, the

system changes between built−in single

disc player and automatic changer.

If “OPEn” appears on the display, it

indicates the compact disc auto changer

lid is open. Close the compact disc auto

changer lid.

The display will show the range from “FAd

F7” to “FAd R7”.

For left/right adjustment, push “AUDIO

CONTROL / MODE” repeatedly until “BAL”

appears on the display. Then turn the

knob to adjust the left/right balance.

If the malfunction is not recovered, take

your vehicle to your Toyota dealer.

Your audio system shows six different dis-

play if the player malfunctions.

^DISC∨∧

The display will show the range from “BAL

L7” to “BAL R7”.

Compact disc auto changer only—

If “WAIT” appears on the display, it indi-

cates inside the player unit may be too

hot due to the very high ambient tempera-

ture. Remove the disc or magazine from

the player and allow the player to cool

down.

By using this button, you can select a

disc you wish to listen to.

Push the either side of the button until the

number of the disc you want to listen to

appears on the display.

If “Err 1” appears on the display, it

indicates the disc is dirty, damaged, or it

was inserted up−side down. Clean the

disc or insert it correctly.

PWR/VOL (Power/Volume)

Push “PWR/VOL” to turn the audio system

on and off. Turn “PWR/VOL” to adjust the

volume.

88

CELICA

U

RAND (Random)

RPT (Repeat)

SCAN

Radio

There are two random features—you can

either listen to the tracks on all the com-

pact discs in the magazine in random or-

der, or only listen to the tracks on a

specific compact disc in random order.

There are two repeat features—you can

either replay a disc track or a whole com-

pact disc.

You can either scan all the frequencies on

a band or scan only the preset stations

for that band.

Repeating a track:

Quickly push and release “RPT” while the

track is playing. “RPT” will appear on the

display. If you hear a beep, you held the

button too long, and the player will repeat

the whole disc. When the track ends, it

will automatically be replayed. This pro-

cess will be continued until you push the

button again to turn off the repeat feature.

To scan all the frequencies:

Random playing for the tracks on a disc:

Quickly push and release “RAND”. “RAND”

will appear on the display and the disc

you are listening to in random order. If

you hear a beep, you held the button too

long, and the player will play all the

tracks in the magazine in random order.

To turn off the random feature, push the

“RAND” a second time.

Quickly push and release “SCAN”. If you

hear a beep, you held the button too long,

and the radio will scan the preset sta-

tions. The radio will find the next station

up the station band, stay there for a few

seconds, and then scan again. To select

a station, push “SCAN” a second time.

Compact disc auto changer only—

To scan the preset stations:

Repeating a disc:

Push and hold “SCAN” until you hear a

beep. The radio will tune in the next pres-

et station up the band, stay there for a

few seconds, and then move to the next

preset station. To select a station, push

“SCAN” a second time.

Compact disc auto changer only—

Push and hold “RPT” until you hear a

beep. “D·RPT” will appear on the display.

The player will repeat all the tracks on the

disc you are listening to. When the disc

ends, the player will automatically go back

to the top track of the disc and replay.

This process will be continued until you

push the button again to turn off the re-

peat feature.

Random playing for all the tracks in the

magazine:

Push and hold “RAND” until you hear a

beep. “D·RAND” will appear on the dis-

play and the player will perform all the

tracks on all the discs in the magazine in

random order. To turn off the random fea-

ture, push “RAND” a second time.

89

CELICA

U

Compact disc player

ST (Stereo reception) display

TUNE (Tuning)

Tuning

There are two scan features—you can ei-

ther scan the tracks on a specific disc or

scan the first tracks of all the discs in the

magazine.

Your radio automatically changes to stereo

reception when a stereo broadcast is re-

ceived. “ST” appears on the display. If the

signal becomes weak, the radio reduces

the amount of channel separation to prev-

ent the weak signal from creating noise.

If the signal becomes extremely weak, the

radio switches from stereo to mono recep-

tion.

Your Toyota has an electronic tuning radio

(ETR). Push and release the “∧” (up) or

“∨” (down) side of “TUNE” to step up or

down the station band. (If you hear

beep, you held the button too long and

the radio will go into the seek mode.)

Scanning for the tracks on a disc:

a

Quickly push and release “SCAN”. “SCAN”

will appear on the display and the player

will scan all the tracks on the disc you

are listening to. If you hear a beep, you

held the button too long, and the player

will scan the first tracks of all the discs

in the magazine. To select a track, push

the “SCAN” a second time. If the player

scanned all the tracks on the disc, it will

stop scanning.

Seeking

In the seek mode, the radio finds and

plays the next station up or down the

station band.

TRACK

(Track

up/down

button):

Compact disc player

By using this button, you can skip up or

down to a different track.

To seek a station, push and hold the “∧”

or “∨” side of “TUNE” until you hear a

beep. Do this again to find another sta-

tion.

Push either side of the track button until

the number of the track you want to listen

to appears on the display. If you want to

return the beginning of the current track,

push the down side of the button one

time, quickly.

Compact disc auto changer only—

Scanning for the first tracks of all the

discs in the magazine:

Push and hold “SCAN” until you hear a

beep. “D·SCAN” will appear on the display

and the player will perform the first track

of the next disc. To select a disc, push

the “SCAN” a second time. If the player

has scanned all the discs, it will stop

scanning.

90

CELICA

U

"Type 3

Details of specific buttons, controls, and

features are described in the alphabetical

listing that follows.

91

CELICA

U

1 2 3 4 5 6 (Preset buttons)

AM FM

(Reverse/Fast forward buttons)

Cassette Player

These buttons are used to preset and

tune in radio stations.

Push “AM FM” to switch between the AM

and FM bands.”AM”, “FM1” or “FM2” will

appear on the display. These systems al-

low you to set twelve FM stations, two for

each button.

Push the fast forward button to fast for-

ward a cassette tape. “FF” will appear on

the display. Push the reverse button to

rewind a tape. “REW” will appear on the

display.

To preset a station to a button: Tune in

the desired station (see “TUNE” or “SEEK”

button). Push and hold down the button

until you hear a beepthis will set the

station to the button. The button number

will appear on the display.

If the audio system is off, you can turn

on the radio by pushing “AM FM”. Also,

push “AM FM” to switch from cassette or

compact disc operation to radio operation.

To stop the tape while it is fast forward-

ing, push the fast forward button or

“TAPE”; to stop the tape while it is re-

winding, push the reverse button or

“TAPE”.

To tune in to a preset station: Push the

button for the station you want. The but-

ton number and station frequency will ap-

pear on the display.

AUDIO CONTROL / MODE

Manual tone adjustment function—

This knob is used to adjust the tone

manually.

If a tape side rewinds completely, the cas-

sette player will stop and then play that

same side. If a tape fast forwards com-

pletely, the cassette player will play the

other side of the tape, using the auto−re-

verse feature.

These systems can store one AM and two

FM stations for each button (The display

will show “AM”, “FM1” or “FM2” when you

push “AM·FM”).

For low−pitch tone adjustment, push

“AUDIO CONTROL

until “BAS” appears on the display. Then

turn the knob to suit your preference.

/

MODE” repeatedly

(Eject button)

Compact Disc Player

Push the cassette tape eject button to

eject a cassette. Push the compact disc

eject button to eject a compact disc.

The display will show the range from

“BAS −5” to “BAS 5”.

If you want to fast forward or reverse

through a compact disc track, push and

hold in the fast forward or reverse button.

When you release the button, the compact

disc player will resume playing.

For middle−pitch tone adjustment, push

After you turn the ignition to “LOCK”, you

will be able to eject a cassette or disc but

you will not be able to reinsert it.

“AUDIO CONTROL

/

MODE” repeatedly

until “MId” appears on the display. Then

turn the knob to suit your preference.

The display will show the range from

“MId −5” to “MId 5”.

92

CELICA

U

For high−pitch tone adjustment, push

“AUDIO CONTROL MODE” repeatedly

until “TRE” appears on the display. Then

turn the knob to suit your preference.

CD (Compact Disc)

If “Err 2” appears on the display, it

indicates no disc is loaded inside the

magazine, insert a disc.

/

Push “CD” to switch from radio or cas-

sette operation to compact disc operation.

If the audio system is off, you can turn

on the compact disc player by pushing

“CD”. In both cases, a disc must already

be loaded in the player.

If “Err 3” or “Err 4” on the display, it

indicates there is a trouble inside the sys-

tem. Eject the disc or magazine. Set the

disc or magazine again.

The display will show the range from

“TRE −5” to “TRE 5”.

Sound balance adjustment function—

When the audio is set into compact disc

operation, the display shows the track or,

track and disc number currently being

played. Each time you push “CD”, the

system changes between built−in single

disc player and automatic changer.

If “OPEn” appears on the display, it

indicates the compact disc auto changer

lid is open. Close the compact disc auto

changer lid.

This knob is also to adjust the sound

balance between the front and rear, and

the right and left speakers.

For front/rear adjustment, push “AUDIO

CONTROL / MODE” repeatedly until “FAd”

appears on the display. Then turn the

knob to adjust the front/rear balance.

If the malfunction is not recovered, take

your vehicle to your Toyota dealer.

Your audio system shows six different dis-

play if the player malfunctions.

^DISC∨∧

The display will show the range from “FAd

F7” to “FAd R7”.

Compact disc auto changer only—

If “WAIT” appears on the display, it indi-

cates inside the player unit may be too

hot due to the very high ambient tempera-

ture. Remove the disc or magazine from

the player and allow the player to cool

down.

By using this button, you can select a

disc you wish to listen to.

For left/right adjustment, push “AUDIO

CONTROL / MODE” repeatedly until “BAL”

appears on the display. Then turn the

knob to adjust the left/right balance.

Push the either side of the button until the

number of the disc you want to listen to

appears on the display.

The display will show the range from “BAL

L7” to “BAL R7”.

If “Err 1” appears on the display, it

indicates the disc is dirty, damaged, or it

was inserted up−side down. Clean the

disc or insert it correctly.

93

CELICA

U

PROG (Program)

Random playing for the tracks on a disc:

Quickly push and release “RAND”. “RAND”

will appear on the display and the disc

you are listening to in random order. If

you hear a beep, you held the button too

long, and the player will play all the

tracks in the magazine in random order.

To turn off the random feature, push the

“RAND” a second time.

∗

Dolbyr

B NR

Push “PROG” to select the other side of

If you are listening to a tape that was

recorded with Dolbyr B Noise Reduction,

push the button marked with the double−D

symbol. The double−D symbol will appear

on the display. Push the button again to

turn off Dolbyr B NR.

a

cassette tape. The display indicates

which side is currently selected (“ ” indi-

cates top side,

side).

“

”

indicates bottom

Auto−reverse feature: After the cassette

player reaches the end of a tape side, it

automatically reverses and begins to play

the other side. This is true whether the

cassette was playing or fast forwarding.

The Dolby NR mode reduces tape noise

by about 10 dB. For best sound reproduc-

tion, play your tapes with this button on

or off according to the mode used for

recording the tape.

Compact disc auto changer only—

Random playing for all the tracks in the

magazine:

PWR·VOL (Power·Volume)

Push and hold “RAND” until you hear a

beep. “D·RAND” will appear on the dis-

play and the player will perform all the

tracks on all the discs in the magazine in

random order. To turn off the random fea-

ture, push “RAND” a second time.

∗

: Dolby noise reduction manufactured under license from

Dolby Laboratories Licensing Corporation. ”DOLBY” and the

Push “PWR·VOL” to turn the audio system

on and off. Turn “PWR·VOL” to adjust the

volume.

double D symbol

Licensing Corporation.

are trademarks of Dolby Laboratories

MTL (Metal) Display

RAND (Random)

If a metal or chrome equivalent cassette

tape is put in the cassette player, the

player will automatically adapt to it and

“MTL” will appear on the display.

There are two random features—you can

either listen to the tracks on all the com-

pact discs in the magazine in random or-

der, or only listen to the tracks on a

specific compact disc in random order.

RPT (Repeat)

Cassette Player

Push “RPT” while the track is playing.

“RPT” will appear on the display. When

the track ends, it will automatically be

rewound and replayed. This process will

be continued until you push the button

again to turn off the repeat feature.

There must be at least 3 seconds of blank

space between tracks in order for the re-

peat feature to work correctly.

94

CELICA

U

Compact Disc Player

SCAN

Radio

Compact disc player

There are two repeat features—you can

either replay a disc track or a whole com-

pact disc.

There are two scan features—you can ei-

ther scan the tracks on a specific disc or

scan the first tracks of all the discs in the

magazine.

You can either scan all the frequencies on

a band or scan only the preset stations

for that band.

Repeating a track:

Quickly push and release “RPT” while the

track is playing. “RPT” will appear on the

display. If you hear a beep, you held the

button too long, and the player will repeat

the whole disc. When the track ends, it

will automatically be replayed. This pro-

cess will be continued until you push the

button again to turn off the repeat feature.

Scanning for the tracks on a disc:

To scan all the frequencies:

Quickly push and release “SCAN”. “SCAN”

will appear on the display and the player

will scan all the tracks on the disc you

are listening to. If you hear a beep, you

held the button too long, and the player

will scan the first tracks of all the discs

in the magazine. To select a track, push

the “SCAN” a second time. If the player

scanned all the tracks on the disc, it will

stop scanning.

Quickly push and release “SCAN”. If you

hear a beep, you held the button too long,

and the radio will scan the preset sta-

tions. The radio will find the next station

up the station band, stay there for a few

seconds, and then scan again. To select

a station, push “SCAN” a second time.

Compact disc auto changer only—

To scan the preset stations:

Repeating a disc:

Push and hold “SCAN” until you hear a

beep. The radio will tune in the next pres-

et station up the band, stay there for a

few seconds, and then move to the next

preset station. To select a station, push

“SCAN” a second time.

Push and hold “RPT” until you hear a

beep. “D·RPT” will appear on the display.

The player will repeat all the tracks on the

disc you are listening to. When the disc

ends, the player will automatically go back

to the top track of the disc and replay.

This process will be continued until you

push the button again to turn off the re-

peat feature.

Compact disc auto changer only—

Scanning for the first tracks of all the

discs in the magazine:

Push “SCAN” until you hear

a

beep.

“D·SCAN” will appear on the display and

the player will perform the first track of

the next disc. To select a disc, push the

“SCAN” a second time. If the player has

scanned all the discs, it will stop scan-

ning.

95

CELICA

U

SEEK (Seeking)

Radio

When counting the number of tracks you

want to rewind, remember to count the

current track as well. For example, if you

want to rewind to a song that is two be-

fore the song you are listening to, push

on the down side of the button until “REW

3” appears on the display.

SKIP

The skip feature allows you to fast for-

ward past long stretches of blank tape.

This is especially useful at the end of

cassettes.

In the seek mode, the radio finds and

plays the next station up or down the

station band.

Push “SKIP”. “SKIP” will appear on the

display. The cassette player will keep

track of how much blank space it plays.

Any time it has played about 10 seconds

of blank tape, it will automatically fast

forward to the next track and begin to

play.

To seek a station, push and hold the “∧”

or “∨” side of “SEEK” until you hear a

beep. Do this again to find another sta-

tion.

If you have pushed the track button more

than you wanted to, push the other side

of the button. The track number will be

reduced.

Cassette Player

By using this button, you can skip up or

down to a different track.

The track number you select is not valid

if it is higher than the number of tracks

remaining on the current cassette side.

Push the button a second time to turn off

the skip feature.

You can skip up to nine tracks at a time.

D After the beginning of the tape is

reached, the player will automatically

start playing the same side.

Push the up or down side of the button.

“FF 1” or “REW 1” will appear on the

display.

ST (Stereo reception) display

Your radio automatically changes to stereo

reception when a stereo broadcast is re-

ceived. “ST” appears on the display. If the

signal becomes weak, the radio reduces

the amount of channel separation to prev-

ent the weak signal from creating noise.

If the signal becomes extremely weak, the

radio switches from stereo to mono recep-

tion.

D After the end of the tape is reached,

the player will automatically reverse

sides and start playing the other side.

Next, push either side of the track button

until the number on the display reaches

the number of tracks you want to skip. If

you push the button ten times, the skip

feature will be turned off.

There must be at least 3 seconds of blank

space between tracks for the track button

to work correctly. In addition, the feature

may not work well with some spoken

word, live, or classical recordings.

96

Car audio system and Air conditioning system -> Using your audio system: controls and features for Your Toyota Celica 2 Door Sixth Generation (1993-1999)

Related Topics

Car audio system and Air conditioning system

Popular Owner Manuals

Latest Owner Manuals