Ignition Switch, Transmission and Parking Brake -> Ignition switch with steering lock for Your Toyota Celica 2 Door Seventh Generation (2000-2006)

’04MY CELICA U (L/O 0308)  
Ignition switch with steering  
lock  
“LOCK”—Engine is off and the steering  
wheel is locked. The key can be re-  
moved only at this position.  
You must push in the key to turn the key  
from “ACC” to the “LOCK” position. On  
vehicles with an automatic transmission,  
the selector lever must be in the “P” posi-  
tion before pushing the key.  
When starting the engine, the key may  
seem stuck at the “LOCK” position. To  
free it, first be sure the key is pushed all  
the way in, and then rock the steering  
wheel slightly while turning the key gently.  
“START”—Starter motor on. The key  
will return to the “ON” position when  
released.  
CAUTION  
For manual transmission:  
For starting tips, see Section 3.  
Never remove the key when the ve-  
hicle is moving, as this will lock the  
steering wheel and result in loss of  
steering control.  
“ON”—Engine on and all accessories  
on.  
This is the normal driving position.  
“ACC”—Accessories such as the radio  
operate, but the engine is off.  
NOTICE  
If you leave the key in the “ACC” or  
“LOCK” position and open the driver’s  
door, a buzzer will remind you to remove  
the key.  
Do not leave the key in the “ON”  
position if the engine is not running.  
The battery will discharge and the  
ignition could be damaged.  
90  
2004 CELICA from Aug. ’03 Prod. (OM20823U)