’04MY CELICA U (L/O 0308)
Headlight beam level control
Loading condition
Dial position
Driver only
0
Driver +
front passenger
0
Full passengers
(including driver)
1.5
Full passengers
(including driver) +
full luggage loading
2.5
4
Driver + full luggage
loading
TURN SIGNALS
To adjust the headlight beam level, turn
the dial.
To signal a turn, push the headlight/
turn signal lever up or down to position
1.
The following list shows examples of prop-
er dial settings. For loading conditions oth-
er than those listed, adjust the dial posi-
tion so that the beam level is the same
as the one obtained according to the list
when only the driver is in the vehicle. The
higher the number of the dial position, the
lower the headlight beam level.
The key must be in the “ON” position.
The lever automatically returns after you
make a turn, but you may have to return
it by hand after you change lanes.
To signal a lane change, move the lever
up or down to the pressure point (position
2) and hold it.
Always keep the headlight beam at the
proper level, or your headlights may
dazzle other road users.
If the turn signal indicator lights (green
lights) on the instrument panel flash faster
than normal, a front or rear turn signal
bulb is burned out.
72
2004 CELICA from Aug. ’03 Prod. (OM20823U)
English 