’04 Corolla_U (L/O 0306)
Perform circling calibration just after
you have purchased your Toyota. And
then always perform circling calibration
after the battery has been removed, re-
placed or disconnected.
D Do not perform circling calibration of
the compass in
a
place where the
earth’s magnetic field is subject to in-
terference by artificial magnetic fields
(underground parking, under
a
steel
tower, between buildings, roof parking,
near a crossing, near a large vehicle,
etc.).
D During calibration, do not operate elec-
tric systems (moon roof, power win-
dows, etc.) as they may interfere with
the calibration.
CALIBRATING THE COMPASS (circling
calibration)
Drive the vehicle in a circle at 8 km/h (5
mph) or less. If there is not enough space
to drive in
a
circle, drive around the
Sometimes the direction display on the
compass may not change after a turn. To
rectify this, stop the vehicle and push and
hold the both personal light switches until
“C” appears on the display.
block.
After driving 1 to 3 circles in the above
method, calibration is completed when the
direction is shown on the display.
CAUTION
D When doing the circling calibration,
If “C” appears on the display because of
a drastic change in the magnetic field,
perform circling calibration.
If calibration cannot be performed because
of the magnetized vehicle etc., take your
vehicle to Toyota dealer.
be sure to secure
a
wide space,
and watch out for people and ve-
hicles in the neighborhood. Do not
violate any local traffic rules while
performing circling calibration.
D Do not adjust the display while the
vehicle is moving. Be sure to adjust
the display only when the vehicle is
stopped.
139
2004 COROLLA from Oct. ’03 Prod. (OM12859U)
English 
