Get Whentroublearises -> If the electronic key does not operate properly Guide for Toyota Corolla 4 Door Eleventh generation (2013-2017)

528

8-2. Steps to take in an emergency

If the electronic key does not operate properly

(vehicles w ith a smart key system)

If communication between the electronic key and vehicle is

interrupted (P. 115) or the electronic key cannot be used

because the battery is depleted, the smart key system and wire-

less remote control cannot be used. In such cases, the doors

can be opened and the engine can be started by following the

procedure below.

Locking and unlocking the doors

Use the mechanical key

(P. 93) in order to perform the

following operations:

Locks all the doors

1

Unlocks the door

2

Turning the key rearward

unlocks the driver’s door. Turn-

ing the key once again within 5

seconds unlocks the other

doors.

COROLLA_TMMMS_TMMC_U (OM12F00U)

529

8-2. Steps to take in an emergency

Starting the engine

1

Continuously variable transmission: Ensure that the shift lever is in

P and depress the brake pedal.

Manual transmission: Shift the shift lever to N and depress the

clutch pedal.

2

Touch the Toyota emblem side

of the electronic key to the

engine switch.

When the electronic key is

detected, a buzzer sounds and the

engine switch will turn to IGNITION

ON mode.

When the smart key system is

deactivated in customization set-

ting, the engine switch will turn to

ACCESSORY mode.

3

Vehicles with a drive monitor display: Firmly depress the brake

pedal (continuously variable transmission) or clutch pedal (manual

transmission) and check that the smart key system indicator light

(green) turns on.

Vehicles with a multi-information display: Firmly depress the brake

pedal (continuously variable transmission) or clutch pedal (manual

transmission) and check that

is shown on the multi-informa-

tion display.

4

Press the engine switch.

8

In the event that the engine still cannot be started, contact your Toyota

dealer.

COROLLA_TMMMS_TMMC_U (OM12F00U)

530

8-2. Steps to take in an emergency

■Stopping the engine

Shift the shift lever to P (continuously variable transmission) or N (manual

transmission) and press the engine switch as you normally do when stopping

the engine.

■Replacing the key battery

As the above procedure is a temporary measure, it is recommended that the

electronic key battery be replaced immediately when the battery is depleted.

(P. 463)

■Changing engine switch modes

Release the brake pedal (continuously variable transmission) or clutch pedal

(manual transmission) and press the engine switch in step

above.

3

The engine does not start and modes will be changed each time the switch is

pressed. (P. 166)

■When the electronic key does not work properly

●Make sure that the smart key system has not been deactivated in the cus-

tomization setting. If it is off, turn the function on.

(Customizable features P. 570)

●Check if battery-saving mode is set. If it is set, cancel the function.

(P. 114)

COROLLA_TMMMS_TMMC_U (OM12F00U)

Whentroublearises -> If the electronic key does not operate properly for Your Toyota Corolla 4 Door Eleventh generation (2013-2017)

Related Topics

Whentroublearises

Popular Owner Manuals

Latest Owner Manuals