Get OPERATION OF INSTRUMENTS AND CONTROLS - Air conditioning system -> Controls Guide for Toyota Prius 4 Door First Generation (1997-2003)

Controls

1. Air intake selector

2. Air flow selector

3. Temperature selector

4. Fan speed selector

5. Air conditioning on−off buttons

27P001e

132

“AUTO” position (for fan speed)

If you want to return the setting to RE-

CIRCULATE mode, press the air intake

selector button once again.

For automatic operation of the air condi-

tioning, turn the fan speed selector knob

to “AUTO” position.

Press the “A/C” and “MAX” button for

dehumidified heating or cooling. This

setting clears the front view more

quickly.

In the automatic operation mode, the air

conditioning selects the most suitable fan

speed according to the temperature.

27p002

5. Windshield—Air flows mainly from the

You may use manual controls if you want

to select your own settings.

windshield vents.

Turning the air flow selector to the

windshield position turns on the defog-

ging function with the purpose of clear-

ing the front view.

Fan speed selector

Turn the knob to adjust the fan speed—to

the right to increase, to the left to de-

crease.

Air flow selector

This position allows the air intake to

select FRESH automatically. This is to

clean up the front view more quickly.

In automatic operation, you do not have

to adjust the fan speed unless you desire

another fan speed mode.

Turn the knob to select the vents used for

air flow.

If you want to return the setting to RE-

CIRCULATE mode, press the air intake

selector button once again.

1. Panel—Air flows mainly from the

Temperature selector

instrument panel vents.

Turn the knob to adjust the temperature

to the right to warm and then to the left

to cool.

2. Bi−level—Air flows from both the floor

For details about air flow selector settings,

see “Air flow selector settings” on page

136.

vents and the instrument panel vents.

3. Floor—Air flows mainly from the floor

vents.

4. Floor/Windshield—Air

flows

mainly

from the floor vents and windshield

vents.

This position allows the air intake to

select FRESH automatically. This is to

clean up the front view more quickly.

133

To prevent fogging up of the windshield,

the air intake mode may change automati-

cally to FRESH depending on the condi-

tion of the air conditioning system.

2−way air intake control

To improve fuel economy, “Fresh” mode

control changes when the air intake se-

lector is set in “Fresh” mode on the

following conditions:

27p003a

27p004b

D When the maximum heating is needed

with the air flow in “Floor” or “Floor/

Windshield”, fresh air flows in the up-

per compartment, while air is recircu-

lated in the lower compartment.

Air intake selector

Air conditioning on−off buttons

D When cooling is needed, both fresh

Press the button to select the air source.

To turn on the air conditioning, push

the “A/C” button.

and recirculate modes turns on.

1. Recirculate—Recirculates the air inside

the vehicle.

1. Turning off the air conditioning

2. Fresh—Draws outside air into the sys-

Push the “A/C” button to turn off the air

conditioning.

tem.

The air intake selector button is used to

switch the air intake FRESH mode that

draws outside air into the system and RE-

CIRCULATED mode that recirculates the

air inside vehicle.

2. Economical and environment−friendly

cooling

Usually use the air conditioning with the

“A/C” button on. If you push the button

again, the air conditioning turns off.

To turn the air source to RECIRCULATED

mode, press the button. The indicator will

come on. To turn the air source to FRESH

mode, press the button again. The indica-

tor will go off.

134

3. Powerful cooling and dehumidifying

For economical and environment−friend-

ly use

If the air conditioning does not work well

with the “A/C” button on, push the “MAX”

button. To cancel the “MAX” mode, push

the “MAX” button again. To turn off the air

conditioning, push the “A/C” button.

Usually, use the air conditioning with the

“A/C” button on (economical and environ-

ment−friendly cooling).

In this mode the gasoline engine starts

and stops automatically and good fuel

economy driving is achieved.

With the “MAX” button on, the gasoline

engine is frequently used.

The air conditioning may not turn on with

the selector lever in “N” position because

the gasoline engine cannot start.

To use the air conditioning in economi-

cal and environment−friendly way, we

recommend the following setting:

If the “A/C” button indicator flashes, there

is a problem in the air conditioning system

and the air conditioning automatically

shuts off. If this happens, take your ve-

hicle to your Toyota dealer for service.

1. Lower the setting temperature if you

feel a little hot with the “A/C” button

on.

2. If you feel still hot with the “A/C” but-

ton on, push the “MAX” button also.

After the compartment cools, turn off

the “MAX” mode only.

135

OPERATION OF INSTRUMENTS AND CONTROLS - Air conditioning system -> Controls for Your Toyota Prius 4 Door First Generation (1997-2003)

Related Topics

OPERATION OF INSTRUMENTS AND CONTROLS - Air conditioning system

Popular Owner Manuals

Latest Owner Manuals