Parts and tools
Here is a list of parts and tools you will
need to perform do−it−yourself mainte-
nance. Remember all Toyota parts are de-
signed in metric sizes, so your tools must
be metric.
CHECKING BRAKE FLUID
Parts (if level is low):
Tools:
ꢀ Funnel
ꢀ SAE J1703 or FMVSS No.116 DOT 3
REPLACING LIGHT BULBS
Parts:
brake fluid
Tools:
CHECKING THE ENGINE OIL LEVEL
Parts (if level is low):
ꢀ Bulb with same number and wattage
rating as original (See charts in “Re-
placing light bulbs–” on page 418.)
ꢀ Rag or paper towel
ꢀ Funnel (only for adding fluid)
ꢀ Engine oil ILSAC multigrade having vis-
Tools:
cosity proper for your climate
CHECKING 12 VOLT BATTERY CON-
DITION
ꢀ Screwdriver
Tools:
Tools:
ꢀ Rag or paper towel
ꢀ Funnel (only for adding oil)
CHECKING THE COOLANT LEVEL
Parts (if level is low):
ꢀ Warm water
ꢀ Baking soda
ꢀ Grease
ꢀ Conventional
wrench
(for
terminal
ꢀ “Toyota Super Long Life Coolant” or
similar high quality ethylene glycol
based non−silicate, non−amine, non−ni-
trite, and non−borate coolant with long−
life hybrid organic acid technology.
clamp bolts)
CHECKING AND REPLACING FUSES
Parts (if replacement is necessary):
ꢀ Fuse with same amperage rating as
“Toyota Super Long Life Coolant” is a
mixture of 50% coolant and 50% deion-
ized water (for the U.S.A.) or 55%
coolant and 45% deionized water (for
Canada).
original
ADDING WASHER FLUID
Parts:
ꢀ Water
Tools:
ꢀ Washer fluid containing antifreeze (for
ꢀ Funnel (only for adding coolant)
winter use)
397
English 