When the headlight switch is turned to the
first or second clickstop, the brightness of
the instrument cluster will be reduced
slightly unless the instrument panel light
control dial is turned fully on.
NOTICE
23p109b
23p110b
To prevent the battery from being dis-
charged, do not leave the switch on
longer than necessary when the hy-
brid system is not running.
Daytime running light system
High−Low beams—For high beams, turn
the headlights on and push the lever away
from you (position 1). Pull the lever to-
ward you (position 2) for low beams.
TURN SIGNALS
The headlights turn on at reduced intensi-
ty when the parking brake is released with
the hybrid system started, even with the
light switch in the “OFF” position.
To signal a turn, push the headlight/
turn signal lever up or down to position
1.
The headlight high beam indicator light
(blue light) on the instrument panel will
tell you that the high beams are on.
To turn on the other exterior lights and
instrument panel lights, twist the knob to
the position 1.
The hybrid system must be in the “IG−
ON” mode.
The lever automatically returns after you
make a turn, but you may have to return
it by hand after you change lanes.
Flashing the high beam headlights
(position 3)—Pull the lever all the way
back. The high beam headlights turn off
when you release the lever.
To turn off the daytime running light sys-
tem, twist the knob to the position 2 or
position 3 with the headlights on or turn
the hybrid system off.
To signal a lane change, move the lever
up or down to the pressure point (position
2) and hold it.
You can flash the high beam headlights
even with the knob turned to “OFF”.
111