Rear view monitor system
Clock
The rear view monitor system assists
the driver by displaying an image of
the rear of the vehicle while backing
up. The displayed image on the screen
is a horizontally reversed mirror image
of the inside rear view mirror.
CAUTION
ꢀ Never depend on the rear view
monitor system entirely when back-
ing up. Always make sure your in-
tended path is clear.
28p009d
To display the rear view image on the
screen, place the selector lever in the
“R” position when the “IG−ON” mode is
enabled.
Use caution just as you would when
backing up any vehicle.
ꢀ Never back up while looking only at
the screen. The image on the
screen is different from actual con-
ditions. Depicted distances between
objects and flat surfaces will differ
from actual distances. If you back
up while looking only at the screen,
you may hit a vehicle, a person or
an object. When backing up, be
sure to check behind and all around
the vehicle visually and with mir-
rors before proceeding.
If you move the selector lever out of the
“R” position, the screen returns to the
previous screen. Operating another func-
tion of the navigation system will display
another screen.
The digital clock indicates the time.
The hybrid system must be in “ACC” or
“IG−ON”.
The rear view monitor system is a supple-
ment device intended to assist back up.
When backing up, be sure to check be-
hind and all around the vehicle visually.
To set the hour: Push the “H” button.
To set the minutes: Push the “M” button.
If the electrical power source has been
disconnected from the clock, the time dis-
play will automatically be set to 1:00.
ꢀ Do not use the system when the
back door is not completely closed.
When the instrument panel lights are
turned on, the brightness of the time indi-
cator will be reduced.
302
English 