When driving -> Headlight switch for Your Toyota Prius 4 Door Third Generation (2010-2015)

2-3. Operat ing t he light s and w indshield w ipers  
Headlight sw itch  
The headlights can be operated manually or automatically.  
Turning the end of the lever turns on the lights as follows:  
Type A  
The headlights, park-  
(if equipped)ing lights and so on  
turn on and off auto-  
matically (when the  
“POWER” switch is  
in ON mode).  
The side marker,  
parking, tail, license  
plate and instrument  
panel lights turn on.  
The headlights and  
all the lights listed  
above turn on.  
The daytime running  
lights turn off.  
250  
2-3. Operating the lights and windshield wipers  
Type B  
The lights (except  
daytime  
running  
lights) turn off.  
The side marker,  
parking, tail, license  
plate and instrument  
panel lights turn on.  
2
The headlights and  
all the lights listed  
above turn on.  
The headlights, park-  
ing lights and so on  
turn on and off auto-  
matically (when the  
“POWER” switch is  
in ON mode).  
251  
2-3. Operating the lights and windshield wipers  
Type C  
The daytime running  
lights turn on.  
The side marker,  
parking, tail, license  
plate, daytime run-  
ning lights and instru-  
ment panel lights turn  
on.  
The headlights and  
all the lights listed  
above (except day-  
time running lights)  
turn on.  
The headlights, park-  
ing lights, daytime  
running lights and so  
on turn on and off  
automatically (when  
the “POWER” switch  
is in ON mode).  
252  
2-3. Operating the lights and windshield wipers  
Turning on the high beam headlights  
With the headlights on, push  
the lever away from you to  
turn on the high beams.  
Pull the lever toward you to the  
center position to turn the high  
beams off.  
2
Pull the lever toward you and  
release it to flash the high  
beams once.  
You can flash the high beams  
with the headlights on or off.  
Daytime running light system  
For the U.S.A.: To make your vehicle more visible to other drivers, the  
daytime running lights turn on automatically whenever the hybrid system  
is started and the parking brake is released.  
Daytime running lights can be turned off by operating the switch. (if  
equipped)  
For Canada: To make your vehicle more visible to other drivers, the day-  
time running lights turn on automatically (at a reduced intensity) whenever  
the hybrid system is started and the parking brake is released. Daytime  
running lights are not designed for use at night.  
For Canada: Compared to turning on the headlights, the daytime running  
light system offers greater durability and consumes less electricity, so it  
can help improve fuel economy.  
253  
2-3. Operating the lights and windshield wipers  
Headlight control sensor (if equipped)  
The sensor may not function properly if  
an object is placed on the sensor, or any-  
thing that blocks the sensor is affixed to  
the windshield.  
Doing so interferes with the sensor  
detecting the level of ambient light and  
may cause the automatic headlight sys-  
tem to malfunction.  
ITO23P105  
Air conditioning operation may also be  
interrupted.  
Automatic light off system  
When the headlights come on: The headlights and tail lights turn off 30  
seconds after a door is opened and closed if the “POWER” switch is  
turned to ACCESSORY mode or turned off. (The lights turn off immedi-  
ately if  
on the key is pressed after all the doors are locked.)  
When only the tail lights come on: The tail lights turn off automatically if  
the “POWER” switch is turned to ACCESSORY mode or turned off and  
the driver’s door is opened.  
To turn the lights on again, turn the “POWER” switch to ON mode, or turn the  
light switch off once and then back to  
or  
.
254  
2-3. Operating the lights and windshield wipers  
Automatic headlight leveling system (if equipped)  
The level of the headlights is automatically adjusted according to the number  
of passengers and the loading condition of the vehicle to ensure that the  
headlights do not interfere with other road users.  
Customization  
Settings (e.g. light sensor sensitivity) can be changed.  
(Customizable features P. 590)  
2
NOTICE  
To prevent 12-volt battery discharge  
Do not leave the lights on longer than necessary when the hybrid system is  
off.  
255