Do-it-yourself maintenance -> Hood for Your Toyota Prius 4 Door Fourth Generation (2016-2022)

503  
6-3. Do-it-yourself maintenance  
Hood  
Release the lock from the inside of the vehicle to open the hood.  
1
Pull the hood lock release lever.  
The hood will pop up slightly.  
2
Pull the auxiliary catch lever to  
the left and lift the hood.  
6
3
Hold the hood open by inserting  
the supporting rod into the slot.  
PRIUS_OM_OM47D44U_(U)  
504  
6-3. Do-it-yourself maintenance  
WARNING  
When closing the hood  
When closing the hood, take extra care  
to prevent your fingers etc. from being  
caught.  
Pre-driving check  
Check that the hood is fully closed and locked.  
If the hood is not locked properly, it may open while the vehicle is in motion  
and cause an accident, which may result in death or serious injury.  
After installing the support rod into the slot  
Make sure the rod supports the hood securely from falling down on to your  
head or body.  
NOTICE  
When closing the hood  
Be sure to return the supporting rod to its clip before closing the hood. Clos-  
ing the hood without returning the support rod properly could cause the  
hood to bend.  
PRIUS_OM_OM47D44U_(U)