Get Instrument cluster Guide for Toyota Prius 4 Door Fourth Generation (2016-2022)

97

Instrument cluster

2

2.

Instrument cluster

Combination meter.............. 98

Warning lights and

indicators ........................ 107

Main display...................... 115

Multi-information

display............................. 122

Head-up display................ 155

Energy monitor/

consumption screen

(vehicles with 7-inch

display) ........................... 162

Energy monitor/

consumption screen

(vehicles with

11.6-inch display)............ 169

PRIUS_OM_OM47D44U_(U)

98

2. Instrument cluster

Combination meter

The large meter uses 2 liquid crystal displays to display informa-

tion such as the vehicle condition, driving status and fuel con-

sumption.

Combination meter layout

The units used on the display may differ depending on the target region.

1

Main display (P. 115)

The main display shows basic information related to driving, such as the

vehicle speed and remaining fuel amount.

2

Multi-information display (P. 122)

The multi-information display shows information which makes the vehicle

convenient-to-use, such as the hybrid system operation condition and fuel

consumption history. Also, the operation contents of the driving support

systems and the combination meter display settings can be changed by

switching to the settings screen.

3

Warning lights and indicators (P. 107)

The warning lights and indicators comes on or flashes to indicate problems

with the vehicle or to show the operation status of the vehicle’s systems.

4

Clock (P. 103)

PRIUS_OM_OM47D44U_(U)

99

2. Instrument cluster

Operations related to the combination meter

The meter control switches equipped on the steering wheel can be

used to switch the screen display and change settings related to func-

tions displayed on the screen.

1

Each time the button is

pressed, the mileage display

switches among odometer, trip

meters, etc., and the fuel con-

sumption information for each

distance switches as well.

( P. 117)

2

Pressing

,

or

performs such operations as

scrolling the screen*, switching

the contents of the display* and

moving the cursor.

3

4

This button is used to perform such operations as selecting the cur-

rent item or switching between on and off.

When pressed, the display returns to the previous screen.

*: On screens where the screen can be scrolled and the display can be

switched, marks are displayed to indicate the direction of operation (such

as

and

).

PRIUS_OM_OM47D44U_(U)

100

2. Instrument cluster

Instrument cluster light control

When the switches are pressed, the instrument cluster light changes

as follows.

The instrument cluster brightness levels that can be selected differ

depending on whether the tail lights are on and surrounding brightness lev-

els. (P. 104)

1

2

Darker

Brighter

When the switches are pressed,

the adjustment level check screen

^{(pop-up display}*) is displayed on

the main display.

When the instrument cluster light is

adjusted, the brightness of the

instrument

changes.

panel

light

also

*: A short time after the operation is completed, the pop-up display turns off.

Furthermore, the pop-up display can be turned on and off in the “Meter

Customize” settings. (P. 151)

PRIUS_OM_OM47D44U_(U)

101

2. Instrument cluster

Information automatically displayed

Some information will be displayed automatically according to power

switch operation, vehicle condition, etc.

■ When starting the hybrid system

When the hybrid system starts,

an opening animation is dis-

played on the 2 displays.

After the animation ends, the

screens switch to the normal

screen.

2

The opening animation will be

stopped in any of the following

situations.

• When the shift position is changed to other than P

• When the Simple Advanced Parking Guidance System (if equipped)

is turned on

■ After refueling

When the power switch is

turned to ON mode after refuel-

ing, the gasoline price setting

screen* is displayed on the

multi-information display.

After refueling, always set the

gasoline price so that the “Eco

Savings” function (P. 136) may

operate properly.

Settings related to the “Eco Savings” function can be changed in the

“Meter Customize” settings. (P. 151)

*: If the amount of fuel that the vehicle is refueled with is too small, this

screen may not be displayed. (P. 121)

■ When the driving assist systems are operating

When using driving assist systems such as the dynamic radar

cruise control with full-speed range* (P. 315) and LDA system*

(P. 304), information related to each system is automatically dis-

played on the multi-information display depending on the situation.

For details regarding the displayed information and the contents of the

display, refer to the explanation page of each system.

*: If equipped

PRIUS_OM_OM47D44U_(U)

102

2. Instrument cluster

■ When there is information to be notified about the vehicle

When a shift position is mistakenly selected or a problem occurs in

a vehicle system, a warning message (or image) is displayed on

the multi-information display.

When a warning message is displayed, follow the instructions displayed

on the display. (P. 591)

■ When stopping the hybrid system

From the time the hybrid system is started until it is turned off, the

driving time, distance traveled, average fuel consumption and Eco

score (P. 129, 146) result are displayed on the multi-information

display approximately every 30 seconds.

1

2

3

Driving time since hybrid sys-

tem started

Distance

traveled

since

hybrid system started

Average fuel consumption

after hybrid system started

4

5

Eco score result and advice

Score display for each Eco

score item (P. 129, 146)

PRIUS_OM_OM47D44U_(U)

103

2. Instrument cluster

Clock adjustment

To adjust the time, perform operations on the

of the multi-information display.

■ Adjusting the time

screen (P. 142)

1

Press

or

of the meter control switches on the steering

wheel and select

.

2

Press

or

of the meter control switches and select

.

3

4

Press

to display the cursor.

or of the

meter control switches to

adjust the cursor position,

and then press

or

to

change the setting.

When the 12-hour display is

selected, “12H” is displayed,

and when the 24-hour display is

selected, “24H” is displayed.

When adjusting minutes, operation automatically starts from 00 sec-

onds.

After changing the settings, press

to return to the previous screen.

PRIUS_OM_OM47D44U_(U)

104

2. Instrument cluster

■ Resetting the minutes display

1

Press

wheel and select

Press or

or

of the meter control switches on the steering

.

2

of the

meter control switches and

select

.

3

Press

.

The minutes display switches to “00”.*

*^{: e.g. 1:00 to 1:29} 1:00

1:30 to 1:59  2:00

■The meters and display illuminate when

The power switch is in ON mode.

■Adjusting the instrument cluster brightness (P. 100)

●The brightness levels that can be selected differ depending on whether the

tail lights are on and surrounding brightness levels, as shown in the table

below.

The tail lights are off

2 levels*

The tail lights are on

2 levels*

In a bright place

In a dark place

22 levels

*: 22 levels of the brightness are displayed on the setting screen. However,

the brightness setting will be the brightest when other than 1st level (the

darkest) is selected. If other than 1st or 22nd level is selected, when the

tail lights are turned on in a dark place, the instrument cluster brightness

setting will be the selected level.

●If the taillights are illuminated in a dark environment, the instrument cluster

light dims. However, when the brightness of the instrument cluster is set to

minimum or maximum (1st or 22nd level of the instrument cluster bright-

ness), even if the taillights are illuminated, the instrument cluster light will

not dim.

PRIUS_OM_OM47D44U_(U)

105

2. Instrument cluster

■When disconnecting and reconnecting 12-volt battery terminals

The settings of the clock will be reset.

■Calendar settings

If calendar recording is interrupted due to

replacement of the 12-volt battery or 12-

volt battery discharge, etc., when the

power switch is turned to ON mode after

maintenance, the calendar settings check

screen is automatically displayed on the

multi-information display.

2

●If date information is not set, the fuel

consumption record cannot be stored

correctly. When the calendar settings

check screen is displayed, make sure to

always set the settings. (P. 149)

●Until the calendar settings are set, the check screen is displayed every time

the power switch is turned to ON mode.

●After the calendar information is set, it can be changed in the “Meter Cus-

tomize” settings. (P. 151)

■When the menu screen on the navigation system is operated (vehicles

with 11.6-inch display)

A pop-up display of the menu screen icon

is displayed on the multi-information dis-

^play.*

*^{: The pop-up display on the navigation}

system can be turned off in the “Meter

Customize” settings. (P. 151)

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

■Pop-up display

Some functions, such as the driving mode select switch and air conditioning

system, are operation-linked and display pop-up screens on the multi-infor-

mation display. If the pop-up screens of these functions are not desired, they

can be turned off in the “Meter Customize” settings. (P. 151)

PRIUS_OM_OM47D44U_(U)

106

2. Instrument cluster

WARNING

■To prevent an accident

Do not place anything or attach a sticker

in front of the instrument cluster. The item

may obscure or obstruct the display, or

could reflect off the display, possibly

causing an accident.

■Caution for use while driving

For safety, avoid operating the meter control switch while driving as much

as possible, and do not look continuously at the multi-information display

while driving. Stop the vehicle and operate the meter control switch. Failure

to do so may cause a steering wheel operation error, resulting in an unex-

pected accident.

NOTICE

■The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal

information display. At extremely low temperatures, the information display

monitor may respond slowly, and display changes may be delayed.

PRIUS_OM_OM47D44U_(U)

107

2. Instrument cluster

Warning lights and indicators

The warning lights and indicators inform the driver of the status

of the vehicle’s various systems.

For the purpose of explanation, the following illustration dis-

plays all indicators and warning lights illuminated.

2

PRIUS_OM_OM47D44U_(U)

108

Warning lights

2. Instrument cluster

Warning lights inform the driver of malfunctions in any of the vehicle’s

systems.

Warning lights

Pages

P. 580

1

*

Brake system warning light (U.S.A.)

Brake system warning light (Canada)

(Red)

P. 580

P. 581

P. 582

Brake system warning light

(Yellow)

Charging system warning light

Low engine oil pressure warning light

Malfunction indicator lamp (U.S.A.)

Malfunction indicator lamp (Canada)

SRS warning light

ABS warning light (U.S.A.)

ABS warning light (Canada)

Electric power steering system warning light

(Red/yellow)

1,2

*

PCS warning light (if equipped)

Slip indicator light

1

*

1

*

High coolant temperature warning light

PRIUS_OM_OM47D44U_(U)

109

2. Instrument cluster

Warning lights

Pages

1, 3

*

PKSB OFF indicator (if equipped)

Open door warning light

P. 582

P. 583

Low fuel level warning light

2

Driver’s and front passenger’s seat belt

reminder light

Rear passengers’ seat belt reminder light

(U.S.A.)

Rear passengers’ seat belt reminder light

(Canada)

1

*

Master warning light

1

Tire pressure warning light

*¹: These lights turn on when the power switch is turned to ON mode to indi-

cate that a system check is being performed. They will turn off after the

hybrid system is on, or after a few seconds. There may be a malfunction in

a system if a light does not come on, or turn off. Have the vehicle

inspected by your Toyota dealer.

*²: The light flashes or illuminates to indicate a malfunction.

*³: The light flashes to indicate a malfunction.

PRIUS_OM_OM47D44U_(U)

110

Indicators

2. Instrument cluster

The indicators inform the driver of the operating state of the vehicle’s

various systems.

Indicators

Pages

P. 257

Turn signal indicator

Headlight indicator (U.S.A.)

Tail light indicator (Canada)

Parking brake indicator (U.S.A.)

Parking brake indicator (Canada)

Headlight high beam indicator

Fog light indicator (if equipped)

Security indicator

P. 259

P. 261

P. 258

P. 261

P. 269

P. 94

“READY” indicator

P. 241

P. 251

P. 409

P. 410

Shift position indicators

Slip indicator light

1, 2

1, 3

*

VSC OFF indicator

P. 326,

331

Cruise control indicator

PRIUS_OM_OM47D44U_(U)

111

2. Instrument cluster

Indicators

Pages

Dynamic radar cruise control indicator (if

equipped)

P. 315

P. 315,

331

Cruise control “SET” indicator

P. 261,

583

AFS OFF indicator (if equipped)

2

1, 3

*

PCS warning light (if equipped)

P. 296

P. 308

P. 309

P. 264

P. 445

P. 338

P. 350

P. 363

P. 378

P. 50

LDA indicator (if equipped)

Steering control indicator (if equipped)

Automatic High Beam indicator (if equipped)

Heated steering wheel indicator (if equipped)

“BSM” indicator (if equipped)

Intuitive parking assist indicator (if equipped)

PKSB OFF indicator (if equipped)

S-APGS indicator (if equipped)

1, 3

1

*

1

“AIR BAG ON/OFF” indicator (U.S.A.)

*

“AIR BAG ON/OFF” indicator (Canada)

P. 50

PRIUS_OM_OM47D44U_(U)

112

2. Instrument cluster

*¹: These lights turn on when the power switch is turned to ON mode to indi-

cate that a system check is being performed. They will turn off after the

hybrid system is on, or after a few seconds. There may be a malfunction in

a system if a light does not come on, or turn off. Have the vehicle

inspected by your Toyota dealer.

*²: The light flashes to indicate that the system is operating.

*³: The light comes on when the system is turned off.

PRIUS_OM_OM47D44U_(U)

113

2. Instrument cluster

Indicators and symbols displayed on the display

■ Main display and multi-information display

Indicators

Pages

EV drive mode indicator

P. 248

P. 336

P. 128

“ECO MODE” indicator

*

2

“PWR MODE” indicator

*

EV Indicator

*: The displayed indicator changes according to the current driving mode.

■ Multi-information display (symbol display*)

Symbol display

Smart key system

Pages

P. 241

P. 584

P. 311

P. 584

Brake Override System/Drive-Start Control/

Parking Support Brake function (if equipped)

LDA (Lane Departure Alert with steering con-

trol) (if equipped)

Low engine oil pressure warning

(Canada only)

*: These symbols are displayed along with a message. Also, the symbol dis-

plays listed here are only an example, and different symbols may be dis-

played according to the contents of the multi-information display.

PRIUS_OM_OM47D44U_(U)

114

2. Instrument cluster

■BSM (Blind Spot Monitor) outside rear view mirror indicators

(if equipped) (P. 338)

●Indicators are also displayed on the out-

side rear view mirrors.

●In order to confirm operation, the BSM

outside rear view mirror indicators illumi-

nate in the following situations:

• When the power switch is in ON

mode, the BSM function is enabled

on the

screen of the multi-infor-

mation display.

• When the BSM function is enabled on the

screen of the multi-infor-

mation display, the power switch is turned to ON mode.

If the system is functioning correctly, the BSM outside rear view mirror indi-

cators will turn off after a few seconds.

If the BSM outside rear view mirror indicators do not illuminate or do not

turn off, there may be a malfunction in the system.

If this occurs, have the vehicle inspected by your Toyota dealer.

WARNING

■If a safety system warning light does not come on

Should a safety system light such as the ABS and SRS warning light not

come on when you start the hybrid system, this could mean that these sys-

tems are not available to help protect you in an accident, which could result

in death or serious injury. Have the vehicle inspected by your Toyota dealer

immediately if this occurs.

NOTICE

■To prevent damage to the engine and its components

The engine may be overheating if the high coolant temperature warning

light comes on or flashes. In this case, immediately stop the vehicle in a

safe place, and check the engine after it has cooled completely. (P. 644)

PRIUS_OM_OM47D44U_(U)

115

2. Instrument cluster

Main display

The main display shows basic information, such as the vehicle

speed and remaining fuel amount. Also, the displayed informa-

tion can be switched according to user preference.

Display contents

2

Simple screen*

Split screen*

*^{: Refer to P. 119 for details on how to change the screen display.}

The units used on the display may differ depending on the target region.

PRIUS_OM_OM47D44U_(U)

116

2. Instrument cluster

1

Speedometer

Displays the vehicle speed

Fuel gauge

2

3

Displays the quantity of fuel remaining in the tank

Outside temperature

Displays the outside temperature within the range of -40°F (-40°C) to

122°F (50°C).

The temperature display flashes for approximately 10 seconds when the

outside temperature drops to approximately 37F (3C) or less, and then

stops flashing.

4

5

6

Mileage display (odometer/trip meters/driving range)

The possible driving range estimated from the mileage and current remain-

ing fuel amount can be displayed. (P. 117)

Average fuel consumption display

The average fuel consumption that is linked with the contents of the mile-

age display can be displayed. (P. 117)

Sub-screen

When split screen is selected for the main display, information such as the

Hybrid System Indicator and current fuel consumption can be displayed.

(P. 119)

PRIUS_OM_OM47D44U_(U)

117

2. Instrument cluster

Switching the mileage display and average fuel consumption

display

Each time

is pressed, the mileage display and fuel consumption

display change in the following order from 1 to 6.

1

Mileage display

2

Average fuel consumption dis-

play

After 1 to 6 are displayed, the dis-

plays return to 1.

2

Use the displayed average fuel

consumption as a reference.

PRIUS_OM_OM47D44U_(U)

118

2. Instrument cluster

1

2

Mileage display

Average fuel consumption display

Average fuel consumption since

last reset

ODO (Odometer)

Total mileage

1

Average fuel consumption since

^{last reset}*¹

TRIP A average fuel consumption

Average fuel consumption since

^{TRIP A was reset}*¹

TRIP A (Trip meter A)

2

3

^{Mileage since last reset}*¹

TRIP B average fuel consumption

Average fuel consumption since

^{TRIP B was reset}*¹

TRIP B (Trip meter B)

^{Mileage since last reset}*¹

Average fuel consumption after

hybrid system started

(Mileage since hybrid sys-

tem was started)

4

5

Average fuel consumption since

Mileage since hybrid system

^{hybrid system was started}*²

^started*²

(Distance to empty)

Approximate distance vehicle

can travel based on current

remaining fuel amount

Blank screen

6 Blank screen

*¹: If

is pressed and held while this item is displayed, the information is

reset.

*²: This item is reset each time the hybrid system starts.

PRIUS_OM_OM47D44U_(U)

119

2. Instrument cluster

Switching the display mode

Simple screen or split screen can be selected for the main display.

When split screen is selected, a variety of information can be displayed on

a sub-screen in addition to the contents of the simple screen.

■ Setting procedure

1

Select the “Meter Customize” settings (

) screen on the

screen of the multi-information display, and then press

(P. 149)

Press

Split Screen”.

.

2

or

of the meter control switches to select “Simple/

3

4

Press

to display the setting screen.

Press

or of the

meter control switches to

select a display mode.

5

Press

.

The contents of the main display switch to the selected display mode.

Press to return to the previous screen.

PRIUS_OM_OM47D44U_(U)

120

2. Instrument cluster

■ Switching contents displayed on the sub-screen

1

Press

or

of the

meter control switches and

select the sub-screen.

When the sub-screen is selected,

is displayed on the sub-

screen.

2

Press

or

of the meter control switches to select the dis-

play item.

One of the following 3 items can be displayed.

Display contents Detail

Hybrid System Indicator

A convenient Hybrid System Indicator is displayed.

Refer to P. 127 for details on how to read the Hybrid

System Indicator.

Current fuel consumption

The current fuel consumption during driving is dis-

played.

• The

mark indicates the value displayed in the

average fuel consumption display (P. 117).

Switching the average fuel consumption display

also changes the position of the

• When the average fuel consumption is reset, the

position of the mark is reset to 0.

mark.

Hybrid battery (traction battery) status

The same contents as the hybrid battery (traction

battery) status on the energy monitor are displayed.

(P. 126)

PRIUS_OM_OM47D44U_(U)

121

2. Instrument cluster

■Outside temperature display

●In the following situations, the correct outside temperature may not be dis-

played, or the display may take longer than normal to change.

• When stopped, or driving at low speeds (less than 12 mph [20 km/h])

• When the outside temperature has changed suddenly (at the entrance/

exit of a garage, tunnel, etc.)

●When “-” or “E” is displayed, the system may be malfunctioning.

Take your vehicle to your Toyota dealer.

■Distance to empty

●This distance is computed based on your average fuel consumption. As a

2

result, the actual distance that can be driven may differ from that displayed.

●When only a small amount of fuel is added to the tank, the display may not

be updated.

When refueling, turn the power switch off. If the vehicle is refueled without

turning the power switch off, the display may not be updated.

■Switching the driving mode (P. 336)

When the driving mode is switched, the

driving mode indicator changes and an

^animation* is displayed on the multi-infor-

mation display.

Also, the background color of the main

display, energy monitor (P. 125) and

Hybrid System Indicator (P. 127)

change as follows.

Driving modes

Normal mode

Power mode

Background color

Green

Red

Eco drive mode

Blue

*: The animation displayed when the driving mode is switched can be turned

off in the “Meter Customize” settings. (P. 151)

PRIUS_OM_OM47D44U_(U)

122

2. Instrument cluster

Multi-information display

A variety of information related to the vehicle can be displayed,

including the operation status of each system and data related

to Eco driving, and the settings of each system can be changed

according to user preference.

Display contents

Information related to each icon

on the upper portion of the multi-

information display can be dis-

played by operating the meter

control switches to select the icon.

Icons are displayed when pressing

or

of the meter control

switches and turn off shortly after

pressing the switch.

Screens linked with vehicle functions may be automatically displayed

according to the operation status of the corresponding functions.

PRIUS_OM_OM47D44U_(U)

123

2. Instrument cluster

Menu icons

Contents

Pages

P. 124

Drive information

The energy monitor that shows the operation

status of the hybrid system, or other informa-

tion such as fuel consumption is displayed.

Clock setting display

The clock settings can be changed.

P. 142

P. 143

P. 144

Navigation system-linked display*¹

The information related to the navigation sys-

tem is displayed.

2

Audio system-linked display*¹

The audio system settings can be changed.

Air conditioning system settings screen

The air conditioning system settings can be

changed.

Driving assist system information

The information related to driving assist sys-

tems such as the LDA (Lane Departure Alert

^{with steering control)}*¹and dynamic radar

^{cruise control with full-speed range}*¹is dis-

played.

P. 148

Warning message display*²

P. 148

P. 149

The warning messages are displayed.

Settings display

The settings of the vehicle functions, meter

display, etc. can be changed.

*¹: If equipped

*²: When there is a warning message that can be displayed, the color of

changes to amber.

PRIUS_OM_OM47D44U_(U)

124

Basic Operations

2. Instrument cluster

1

Press

or

of the meter control switches and select the icon

of the desired item.

The selected icon is highlighted and the display switches to the information

screen.

When split screen display is selected for the main display, the sub-screen

of the main display can also be selected. (P. 120)

2

3

Press

tents of the display.

Press on screens where it

or

of the meter control switches to switch the con-

is necessary to select or con-

firm an item.

On screens with tab displays,

pressing

play, and the screen display can be

changed by pressing or of

the meter control switches.

selects the tab dis-

Tab display

4

Press

to return to the previous screen.

Drive information

When

pressing

is selected, the following information can be displayed by

or of the meter control switches.

● Energy monitor (P. 125)

● Hybrid System Indicator (P. 127)

● “Fuel Consumption Record” (P. 131)

● “Drive Monitor” (P. 135)

● “Eco Savings” (P. 136)

● “Eco-Diary” (P. 139)

● AWD display (for AWD vehicles only) (P. 141)

PRIUS_OM_OM47D44U_(U)

125

2. Instrument cluster

◆ Energy monitor

The energy monitor can be used to check the vehicle drive status,

hybrid system operation status and energy regeneration status.

When energy is flowing, an arrow appears and a bright point of light

moves to show the direction of the flow of energy. When energy is

not flowing, the bright point of light is not displayed.

1

Gasoline engine

2

3

Electric motor

(traction motor)

2

Hybrid battery

(traction battery)

4

5

Tire

Bright point of light showing

the flow of energy

As an example, all arrows are shown in the illustration, but the actual con-

tents of the display will differ.

(Display example)

● When the hybrid battery (traction battery) is being charged, the

3

bright point of light moves towards

.

1

2

● During driving, the bright point of light moves from

or

(or

4

both depending on the situation) towards .*

● During driving, the image of the tires rotates.

*: The display may differ depending on the driving status.

PRIUS_OM_OM47D44U_(U)

126

2. Instrument cluster

■Hybrid battery (traction battery) status

●The display changes in 8 levels according to the remaining charge amount

of the hybrid battery (traction battery).

1

Low

2

High

●The hybrid battery (traction battery) status is also displayed on the following

screen, but the contents of the display are the same.

• Sub-screen of the main display (P. 120)

• Hybrid System Indicator (P. 127)

• Head-up display (if equipped) (P. 155)

●The charge amount of the hybrid battery (traction battery) is automatically

controlled by the hybrid system. For this reason, even if electricity is recov-

ered via the regenerative braking, or electricity is generated via the gasoline

engine, the displayed hybrid battery (traction battery) charge amount may

not reach the highest level (level 8). However, this does not indicate a mal-

function.

■Remaining charge amount warning of hybrid battery (traction battery)

●The buzzer sounds intermittently when the hybrid battery (traction battery)

remains without charging while the shift position is in N, or the remaining

charge amount drops below a certain level.

If the remaining charge amount drops further, the buzzer sounds continu-

ously.

●When a warning message is shown on the multi-information display and the

buzzer sounds, follow the instructions displayed on the screen to perform

troubleshooting.

PRIUS_OM_OM47D44U_(U)

127

2. Instrument cluster

◆ Hybrid System Indicator

The display changes according to accelerator pedal operation and

displays the current driving status and energy regeneration status.

The Hybrid System Indicator can be displayed on the sub-screen of the

main display (P. 120) and the head-up display (if equipped)

(P. 155).

■ How to read the display

2

Multi-information

display

Sub-screen

Head-up display

(if equipped)

1

2

3

Charge area

Shows that energy is being recovered via the regenerative charging.

Eco area

Shows that the vehicle is being driven in an Eco-friendly manner.

Power area

Shows that an Eco-friendly driving range is being exceeded (during full

power driving etc.)

Hybrid Eco area*¹

4

Shows that gasoline engine power is not being used very often.

The gasoline engine will automatically stop and restart under various

conditions.

PRIUS_OM_OM47D44U_(U)

128

2. Instrument cluster

EV indicator*^{2, 3}

5

The EV indicator comes on when the vehicle is driven using only the

electric motor (traction motor) or the gasoline engine is stopped.

6

7

Hybrid battery (traction battery) status

P. 126

Eco score

P. 129

● By keeping the indicator within Eco area, more Eco-friendly driv-

ing can be achieved.

● Charge area indicates regeneration*⁴status. Regenerated

energy will be used to charge the hybrid battery (traction battery).

*¹: Not displayed on the sub-screen.

*²: Not displayed on the sub-screen or head-up display.

*³: The EV indicator function can be turned off in the “Meter Customize”

settings. (P. 151)

*⁴: When used in this manual, “regeneration” refers to the conversion of

energy created by the movement of the vehicle into electrical energy.

■ “ECO Accelerator Guidance”

A blue zone is displayed in the

Eco area which can be used as

a reference operation range for

using the accelerator pedal

according to driving conditions

such as starting off and cruis-

ing.

“ECO Accelerator Guidance”

The “ECO Accelerator Guid-

ance” display changes accord-

ing to the driving status, such as

when starting off or cruising.

It is easier to drive in an Eco-friendly manner by driving according to the

display showing the accelerator pedal operations and staying within the

“ECO Accelerator Guidance” range. (P. 225)

The “ECO Accelerator Guidance” function can be turned off in the

“Meter Customize” settings. (P. 151)

PRIUS_OM_OM47D44U_(U)

129

2. Instrument cluster

■ Eco score

The driving status for the following 3 situations are evaluated in 5

levels: Smooth start-off acceleration (“Eco-Start”), driving without

sudden acceleration (“Eco-Cruise”) and smooth stopping (“Eco-

Stop”). Each time the vehicle is stopped, a score result is displayed

out of a perfect score of 100 points.

1

Score result

2

3

4

“Eco-Start” status

“Eco-Cruise” status

“Eco-Stop” status

2

How to read the bar display:

Score

Low*

High

Bar display

*: For items not currently evaluated, the display reads 0.

● The Eco score is reset each time the vehicle starts off to start a new

evaluation.

● When the shift position is P, only the Eco score display area is

enlarged and displayed. When the shift position is shifted from P,

the display returns to normal.

● When the hybrid system stops, the current total score result and

advice on how to increase the score are displayed. (P. 102)

PRIUS_OM_OM47D44U_(U)

130

2. Instrument cluster

■When operation of each function stops

●The Hybrid System Indicator stops operating in the following situations.

• The “READY” indicator is not illuminated.

• The shift position is not D or B.

●The Eco score and “ECO Accelerator Guidance” stop operating in the fol-

lowing situations.

• The Hybrid System Indicator is not operating.

• Cruise control (if equipped) or dynamic radar cruise control with full-

speed range (if equipped) is being used.

■About the Eco score

●After starting off, Eco score display does not start until the vehicle speed

exceeds approximately 12 mph (20 km/h).

●In addition to the vehicle driving status, the Eco score also evaluates the air

conditioning system usage condition (P. 146). The score displayed when

the hybrid system stops is the total result of the driving status after the

hybrid system starts and the air conditioning usage condition.

■Predictive Efficient Drive (Predictive Deceleration Support) (vehicles

with 11.6-inch display)

When a predictive deceleration support point registered in the navigation sys-

tem is approached, the system turns off the Eco accelerator guide and

informs the driver of releasing the accelerator pedal early.

For details about Predictive Efficient Drive (Predictive Deceleration Support),

refer to “NAVIGATION SYSTEM OWNER’S MANUAL”.

PRIUS_OM_OM47D44U_(U)

131

2. Instrument cluster

◆ “Fuel Consumption Record”

The transitions of the average fuel consumption after the hybrid

system starts can be checked in such a unit as every 5 minutes or

every 1 mile (1.6 km)*¹or 1 km (0.6 mile)*²of driving. Also, it is

possible to check the average fuel consumption history for each

month by switching to the “Monthly” display.

*¹: When the unit is set to “MPH”

*²: When the unit is set to “km/h”

■ How to read the screen

2

The “5 min” display is shown as an example. However, the basic

method for how to read the screen is the same for each fuel con-

sumption history screen.

1

Current average fuel con-

sumption record (yellow dis-

play)*¹

When the recorded unit is

exceeded (every 5 min., every

2

1 mile [1.6 km]

or 1 km

*

[0.6 mile] ³, etc.) the currently

*

displayed

history

moves

towards the left side and the old-

est record is deleted.

2

3

Past average fuel consumption record (green display)

Tab display

Displays types of “Fuel Consumption Record”.

*¹: When displayed by “Monthly”, the average fuel consumption for the cur-

rent month is displayed.

*²: When the unit is set to “MPH”

*³: When the unit is set to “km/h”

PRIUS_OM_OM47D44U_(U)

132

2. Instrument cluster

■ Types of “Fuel Consumption Record”

 When the unit is set to “MPH”

Tab display

“5 min”

Recorded contents

Recorded range

Average fuel consumption

The past 30 minutes

1

of every 5 minutes

*

Average fuel consumption

The last 15 miles (24.1 km)

driven

“1 miles”

“5 miles”

“Monthly”

of every 1 mile (1.6 km)

1

driven

*

Average fuel consumption

The last 30 miles (48.3 km)

driven

of every 5 miles (8 km)

1

driven

*

Record of last 4 months and

the same month of the pre-

vious year

Average fuel consumption

2, 3

of this month

*

*¹: This record is reset each time the hybrid system stops.

*²: The maximum value of the graph can be switched in 3 levels (150 MPG,

100 MPG and 50 MPG) by operating the

or

of the meter control

switches while the “Monthly” tab display is selected.

*³: The “Monthly” record can be reset on the “Meter Customize” settings

screen. (P. 151)

PRIUS_OM_OM47D44U_(U)

133

2. Instrument cluster

 When the unit is set to “km/h”

Tab display

“5 min”

Recorded contents

Recorded range

Average fuel consumption

The past 30 minutes

^{of every 5 minutes}*¹

Average fuel consumption

of every 1 km (0.6 mile)

^driven*¹

The last 15 km (9.3 miles)

driven

“1 km”

Average fuel consumption

of every 5 km (3.1 miles)

^driven*¹

The last 30 km (18.6 miles)

driven

“5 km”

2

Record of last 4 months and

the same month of the pre-

vious year

Average fuel consumption

“Monthly”

^{of this month}*^{2, 3}

*¹: This record is reset each time the hybrid system stops.

*²: The maximum value of the graph can be switched in 3 levels (10 L/100 km,

6 L/100 km and 3 L/100 km) by operating the

or

of the meter con-

trol switches while the “Monthly” tab display is selected.

*³: The “Monthly” record can be reset on the “Meter Customize” settings

screen. (P. 151)

PRIUS_OM_OM47D44U_(U)

134

2. Instrument cluster

■ Switching the fuel consumption history screen

1

While the “Fuel Consumption Record” screen is displayed, press

.

The tab display is selected and it is possible to switch the contents of

the display.

2

Press

or

of the meter control switches to switch the con-

tents of the display.

Each time

is pressed, the display switches in the following order:

 When the unit is set to “MPH”

“5 min”, “1 miles”, “5 miles” and “Monthly”*. When

switches in the reverse order.

is pressed, it

 When the unit is set to “km/h”

“5 min”, “1 km”, “5 km” and “Monthly”*. When

in the reverse order.

is pressed, it switches

*: After “Monthly”, the display returns to “5 min”.

■Calendar settings

P. 153

PRIUS_OM_OM47D44U_(U)

135

2. Instrument cluster

◆ “Drive Monitor”

Displays information such as the driving time and average vehicle

speed, which are linked with the current mileage display. (P. 117)

1

Current contents of the dis-

play

Displayed information shows

which driving record the cur-

rently displayed contents are

based on.

2

3

4

“Elapsed Time”

“Average Speed”

“EV Driving Ratio”

For the displayed distance of the mileage display, the percent traveled

using only electric motor power is displayed.

Each time

is pressed, the mileage display (P. 117) switches

and the contents of the “Drive monitor” change as follows.

1

Mileage display

ODO

Contents of the “Drive monitor”

Information since last reset*¹

After Reset

TRIP A

Information based on driving record of

TRIP A

TRIP B

^{TRIP A}*²

Information based on driving record of

TRIP B

^{TRIP B}*²

Information since hybrid system was

After Start

^started*³

Blank screen

*¹: When the average fuel consumption is reset (P. 118), the “Drive monitor”

display is also reset.

*²: When the trip meter is reset (P. 118), the “Drive monitor” display is also

reset.

*³: This item is reset each time the hybrid system starts.

PRIUS_OM_OM47D44U_(U)

136

◆ “Eco Savings”

2. Instrument cluster

“Gasoline Price”*¹and “COMP. Consumption” information is regis-

tered in the “Meter Customize” settings (P. 151), making it possi-

ble to display 2 types of information related to gasoline fuel

consumption.

 “SAVINGS”

If information about the vehicle used to compare fuel consumption

(“COMP. Consumption”) is entered, when the fuel consumption of

this vehicle according to the mileage of the trip meter*²is greater

than that of the comparison vehicle, an estimation*³of the amount

of the fuel cost savings is displayed.

 “FUEL COST”

If information about the vehicle used to compare fuel consumption

(“COMP. Consumption”) is not entered, an estimation*³of the

amount of fuel cost savings is displayed according to the mileage of

the trip meter*².

*¹: “Gasoline Price” is information necessary to display the “SAVINGS”

and “FUEL COST” records.

*²: The display can be switched from the mileage history to the history by

month. (P. 138)

*³: The displayed amount is only an estimate, and may differ from the

actual amount.

PRIUS_OM_OM47D44U_(U)

137

2. Instrument cluster

■ How to read the display

“SAVINGS” display

“FUEL COST” display

2

1

Trip meter distance traveled*

2

3

4

5

Estimate of fuel consumption saved for displayed distance trav-

eled*

Estimate of fuel expenses necessary to drive currently displayed

distance*

Estimate of fuel expenses to drive currently displayed distance

(your vehicle)*

Estimate of fuel expenses to drive currently displayed distance

(comparison vehicle)*

*^{: When the trip meter is reset (}P. 118), the “Eco Savings” record is also

reset.

PRIUS_OM_OM47D44U_(U)

138

2. Instrument cluster

■ Checking monthly record

The display can be switched to “TRIP” or “Monthly” by pressing

with the tab display selected, and then pressing

meter control switches.

or

of the

Using the “Monthly” display, the

monthly records for “SAVINGS”

and “FUEL COST” can be

checked.

The records for the past 5

months can be displayed by

operating

of the meter con-

trol switches with the “Monthly”

tab display selected.

To reset the “Monthly” contents, perform “History Reset” in the “Meter

Customize” settings (P. 151).

PRIUS_OM_OM47D44U_(U)

139

2. Instrument cluster

◆ “Eco-Diary”

The distance traveled and average fuel consumption history can be

displayed in a table according to day (“Daily”) or month (“Monthly”)

units.

■ How to read the display

“Daily” display

“Monthly” display

2

1

2

3

4

5

Record of the day/month

Date/month of stored information

Total distance traveled for the day/month

Average fuel consumption of the day/month

Tab display

The display can be switched between “Daily” and “Monthly” by pressing

to enter the select condition, and then operating

meter control switches.

or

of the

PRIUS_OM_OM47D44U_(U)

140

2. Instrument cluster

■ Checking history

When each screen is selected, past records from the following

ranges can be displayed by pressing

trol switches.

or

of the meter con-

Displayed screen

“Daily”

Displayed information

Stored information

Up to 32 reports

(8 screens)

4 reports

Up to 24 reports

(6 screens)

“Monthly”

● If the above number of records is exceeded, the oldest informa-

tion is deleted.

● To reset the history, perform “History Reset” in the “Meter Cus-

tomize” settings (P. 151). (“Daily” and “Monthly” information

can be reset independently.)

■Calendar settings

P. 153

PRIUS_OM_OM47D44U_(U)

141

2. Instrument cluster

◆ AWD display (for AWD vehicles only)

Displays the drive status of each wheel in 6 steps from 0 to 5.

1

Front-left wheel drive status

Front-right wheel drive status

Rear-left wheel drive status

Rear-right wheel drive status

2

3

4

2

How to read the drive status display:

Drive status

Not being driven

Maximum drive power

Indicators

■About drive status display

●Indicates the drive status of each wheel by the number of bars based on the

driving conditions and AWD system.

●When the drive power to each wheel is large, the number of bars increases,

and when the drive power is small the number of bars decreases.

●When the number of bars to the rear wheels is small, the system determines

that stable driving is being performed and the AWD function is suppressed

to increase fuel economy.

PRIUS_OM_OM47D44U_(U)

142

2. Instrument cluster

Clock setting display

The clock settings can be

changed.

Item

Setting result

Adjusts the clock.

(P. 103)

Sets the minutes to

“00”. (P. 104)

PRIUS_OM_OM47D44U_(U)

143

2. Instrument cluster

Navigation system-linked display (if equipped)

Displays a compass linked with

the navigation system. Also, when

the navigation system is perform-

ing intersection guidance during

destination guidance, the inter-

section guidance is also displayed

on the multi-information display.

2

The illustration is only an example

and may differ from the actual

screen.

For details on how to set the destination and switch the map direction,

refer to “NAVIGATION SYSTEM OWNER’S MANUAL”.

Audio system-linked display (if equipped)

The information about the cur-

rently selected audio source is

displayed.

The illustration is only an example

and may differ from the actual

screen.

To switch the audio source, press

to display the audio source

selection screen, press

or

of the meter control switches and

select the desired audio source,

and then press

.

To stop audio source selection, press

screen.

on the audio source selection

PRIUS_OM_OM47D44U_(U)

144

2. Instrument cluster

Air conditioning system settings screen

The condition of the air conditioning system settings can be checked

on the screen and the air conditioning system settings can be

changed using the meter control switches.

On the air conditioning settings screen, press

trol switches to switch the contents of the display.

or

of the meter con-

For details regarding the air conditioning system function, refer to P. 424, 434.

■ Screen display and setting items that can be changed

PRIUS_OM_OM47D44U_(U)

145

2. Instrument cluster

Settings

P. 146

Item

Eco score

(A/C score)

1

2

Temperature

setting

Changes according to operation of the meter control

^switches*¹

Outside air and

recirculated air

modes

3

(Outside air mode)

(Recirculated air mode)

1 to 7

Fan speed

4

5

2

“CLIMATE

CONTROL”

“NORMAL”

“ECO”

“On (Driver

“On (Fr Seat

S-FLOW mode

“Off (All seat)”

6

^Priority)”*²

^Only)”*²

*¹: “LO” is displayed if the temperature is adjusted to the lowest setting, and

“HI” is displayed if the temperature is adjusted to the highest setting.

*²: The selectable modes differ depending on whether a passenger is present.

(P. 426, 436)

■ Adjusting the settings

1

Press

to display the cursor.

2

3

Press

or of the meter control switches to select the

desired item to set.

Press or of the meter control switches to select the set-

ting item or setting value.

The air conditioning system cannot be stopped by performing opera-

tions on the air conditioning settings screen. Please use the air condi-

tioning switch or navigation system to stop the air conditioning system.

*

*: Vehicles with 11.6-inch display only

PRIUS_OM_OM47D44U_(U)

146

2. Instrument cluster

■ Eco score (A/C score)

The current air conditioning system usage status is evaluated in 5

levels to determine whether it is Eco-friendly.

The evaluation changes according to the air conditioning system

usage status. When the power switch is turned off, the current total

driving score*¹and advice*²related to using the air conditioning

system are displayed. (P. 102)

Low score*³

1

2

High score

Avoiding excessive use of the

air conditioning system and

using the air conditioning sys-

tem at the appropriate setting

according to the ambient tem-

perature and number of passen-

gers and with the S-FLOW

mode

(

)

and “CLIMATE

CONTROL” will result in a high

evaluation.

*¹: The Eco score (A/C score) is not evaluated for approximately 1 minute

after the power switch is turned to ON mode.

*²: This advice may not be displayed depending on the situation.

*³: For items not evaluated with an Eco score (A/C score), the display

PRIUS_OM_OM47D44U_(U)

147

2. Instrument cluster

■Operating switches of the air conditioning system operation panel

●When the air conditioning system

switches are operated to change the air

conditioning settings while a screen

other than the air conditioning system

settings screen is displayed on the multi-

information display, a pop-up display for

the air conditioning settings contents is

displayed. However, air conditioning

system settings cannot be changed on

the pop-up display.

2

●The pop-up display function that displays when the air conditioning settings

are changed using the air conditioning system switches can be turned off in

the “Meter Customize” settings. (P. 151)

■Eco score (A/C score)

●The setting status of the following air conditioning system functions are

reflected in the score.

• Temperature setting

• Fan speed setting

• Outside air and recirculated air modes

• “A/C” button

• S-FLOW mode

• “CLIMATE CONTROL”

●The Eco score (A/C score) is evaluated according to the ambient tempera-

ture and cabin temperature. Accordingly, even if the same settings are

always used for the air conditioning system, the evaluation will change

according to such factors as the season and weather.

●When the air conditioning system is not being used or the airflow mode is

set to

or

, the Eco score (A/C score) is not evaluated. (While the

air conditioning system is not evaluated, its usage status is not reflected in

the total Eco score result.)

●The Eco score (A/C score) is a function that helps select an air conditioning

system setting which reduces fuel consumption, not a function that satisfies

both comfortability and low fuel consumption.

PRIUS_OM_OM47D44U_(U)

148

2. Instrument cluster

Driving assist system information

The operation status of driving

support system such as the LDA

(Lane Departure Alert with steer-

ing control) (if equipped) and

dynamic radar cruise control with

full-speed range (if equipped) and

warning information are dis-

played.

For details regarding the driving

support functions, refer to the page

for the corresponding function.

Warning message display

The warning messages that have

been displayed since the power

switch was turned to ON mode

can be checked.

When multiple warning messages

have been displayed, the display

can be switched by pressing

or

of the meter control switches.

Warning messages that have been currently cleared and some warning

messages are not displayed. Also, when there are no warning messages

that can be checked, the display indicates that there are no messages.

PRIUS_OM_OM47D44U_(U)

149

2. Instrument cluster

Settings display

The operation contents of the driving support systems and settings

related to the combination meter display can be changed.

Driving support systems such as the PCS (Pre-Collision System) (if

equipped) and Blind Spot Monitor (if equipped) is turned on and off by sim-

ply pressing

. Make sure not to cancel the systems accidentally.

■ Setting procedure

2

1

Press

wheel and select

Press or

or

of the meter control switches on the steering

.

2

of the meter control switches and select the

item to change, and then press

.

If the function is turned on and

off or the sensitivity, etc. is

changed on the setting screen,

the setting is changed each time

the

is pressed.

For functions that allow opera-

tion contents, display contents,

etc., of a function to be selected,

the setting screen is displayed.

3

When the setting screen is displayed, select the setting or

desired value (time, etc.) with the meter control switches.*^{1, 2}

For selectable operation con-

tents and setting values, select

the desired setting or value, and

then press

.

To stop the selection, press

.

When the setting check screen

is displayed, select proceed or

cancel and press

.

*¹: Depending on the items, a subsequent setting screen may be displayed

after selecting an item.

*²: For items which set the adjustment level or time, after the item is set,

the setting screen remains displayed until

is pressed.

PRIUS_OM_OM47D44U_(U)

150

■ Settings table

2. Instrument cluster

Item

Settings

“On”

Setting result

Turns the LDA system steering control

function on and off. (P. 314)

*

“Off”

“High”

“Standard”

“On”

Switches the LDA system lane deviation

sensitivity. (P. 314)

Turns the PCS (Pre-Collision System) on

and off. (P. 296)

“Off”

Far

Switches the PCS (Pre-Collision System)

warning timing. (P. 296)

*

Middle

Near

“On”

Turns the Intuitive parking assist on and off.

(P. 350)

*

“Off”

“On”

Turns the Parking Support Brake function

on and off. (P. 363)

“Off”

“On”

Turns the Blind Spot Monitor on and off.

(P. 339)

“Off”

“On”

Turns the LDA system vehicle sway warn-

ing on and off. (P. 314)

“Off”

“High”

“Standard”

“Low”

Height

Brightness

“km/h”

“MPH”

Switches the LDA system vehicle sway

warning sensitivity. (P. 314)

*

Changes the display position and bright-

ness of the head-up display. (P. 157)

Switches the speed unit used by the screen

display.

“Meter Customize” settings: P. 151

“Vehicle Settings” settings: P. 678

*: If equipped

PRIUS_OM_OM47D44U_(U)

151

2. Instrument cluster

■ “Meter Customize” settings (

)

Item

Settings

Setting result

“Simple”

“Simple/Split

Screen”

Switches the display mode of

the main display. (P. 119)

“Split”

“Yes”

“No”

“Screen

Turns the multi-information dis-

play off.

^OFF”*¹

“On”

“ECO Acceler-

ator Guidance”

Turns the “ECO Accelerator

Guidance” on and off.

2

“HV System

Indicator”

(P. 127)

“Off”

“On”

“Off”

“On”

“Off”

“On”

“Off”

“On”

“Off”

“On”

“Off”

“EV Indicator

Light On/Off”

Turns the EV indicator on and

off.

“Navigation”*²

“Instrument

Panel Light”

“Gasoline

Price”

“Climate

Settings”

Turns the pop-up display of the

selected item on the multi-

information display on and off.

“Pop-up Display

On/Off”

“Cruise

Control

Operation

Display”

“On”

“Off”

“On”

“Off”

“On”

“Off”

“On”

“Off”

“HUD

^Settings”*²

“Driving Mode

Select”

“Multimedia

^Menu”*²

“Off”

“Speed

Switches the operation con-

tents of the speed limit func-

tion.

^Limit”*^{2, 3}

(P. 159)

“Only Display”

“With Caution”

PRIUS_OM_OM47D44U_(U)

152

2. Instrument cluster

Item

Settings

Setting result

“English” (English)

“Français” (French)

“Español” (Spanish)

Month/Day/Year*⁴

Day/Month/Year*⁵

“Gasoline Price”

Switches the language dis-

played on the screen.

“Language”

Changes the date used to

record fuel consumption data.

“Calendar”

“Eco Savings”

(P. 136)

Registers data used to calcu-

late and record “Eco Savings”.

“COMP. Consumption”

Deletes data of “Fuel Con-

sumption Record (Monthly)”.

(P. 131)

“Yes”

“Monthly Fuel

Consumption”

“No”

“Yes”

“Eco Savings

Deletes data of “Eco Savings

(Monthly)”

(Monthly)”. (P. 136)

“No”

“History

Reset”

“Yes”

“Eco-Diary

Deletes data of “Eco-Diary

(Daily)”

(Daily)”. (P. 139)

“No”

“Yes”

“Eco-Diary

Deletes data of “Eco-Diary

(Monthly)”

(Monthly)”. (P. 139)

“No”

“Yes”

“No”

Returns the combination meter

settings to their initial settings.

“Initialization”

*¹: When the screen is turned off, pressing

again.

displays the setting screen

*²: If equipped

*³: U.S.A. only

*⁴: Except for Canada

*⁵: For Canada

PRIUS_OM_OM47D44U_(U)

153

2. Instrument cluster

■Setting items

●“Meter Customize” and “Vehicle Settings” setting items are not selectable

during driving and cannot be operated.

Also, the settings screen is temporarily canceled in the following situations.

• A warning message is displayed.

• The vehicle starts off.

●Settings for functions not equipped to the vehicle are not displayed.

●When a function is turned off, the related settings for that function are not

selectable.

■Calendar settings

2

●Calendar settings contents are linked to the recorded information of “Fuel

Consumption Record (Monthly)” (P. 131) and “Eco-Diary” (P. 139).

When the calendar date is changed, each record is processed as follows:

“Fuel Consumption

Contents of date

Record (Monthly)”

record

“Eco-Diary” record

change

Date changed to future

date

Not cleared*

Cleared

Not cleared*

All cleared

Date changed to before

last month

Date changed to earlier

date within current

month

Only “Daily” data

cleared

Not cleared

*: Month/date information not recorded is set to “0” or “0.0”.

●When the recorded contents of “Fuel Consumption Record (Monthly)” are

changed due to changing the calendar settings, the “Monthly” information of

“Eco Savings” (P. 136) is also changed.

PRIUS_OM_OM47D44U_(U)

154

2. Instrument cluster

WARNING

■Cautions while setting up the display

As the hybrid system needs to be operating during setting up the display,

ensure that the vehicle is parked in a place with adequate ventilation. In a

closed area such as a garage, exhaust gases including harmful carbon

monoxide (CO) may collect and enter the vehicle. This may lead to death or

a serious health hazard.

NOTICE

■While setting up the display

To prevent 12-volt battery discharge, ensure that the hybrid system is oper-

ating while setting up the display features.

PRIUS_OM_OM47D44U_(U)

155

2. Instrument cluster

Head-up display^

The head-up display can display the current vehicle speed and

Hybrid System Indicator in front of the driver. Also, it can display

various types of information to assist the driver.

Operation switches and display contents

2

The units used on the display may differ depending on the target region.

1

Meter control switches

These switches are used when adjusting the display position and bright-

ness of the head-up display. (P. 157)

2

3

4

“HUD” (Head-up display) switch (P. 156)

Vehicle speed display

Cruise control display

Dynamic radar cruise control (if equipped):

Displays the set speed and approach warning display. (P. 315)

Cruise control (if equipped):

Displays the set speed only. (P. 331)

5

Hybrid System Indicator (P. 127)

: If equipped

PRIUS_OM_OM47D44U_(U)

156

2. Instrument cluster

6

Insert display (P. 158)

This display inserts information from each driving support system accord-

ing to driving conditions.

7

Route guidance display (vehicles with navigation system)

(P. 159)

This display is automatically shown when the navigation system is per-

forming route guidance.

“HUD” (Head-up display) switch

The “HUD” switch can be used to turn the head-up display on and off,

or switch the display contents.

■ When the head-up display is off

Pressing the “HUD” switch

turns the head-up display on

and starts the display.

The indicator light on the “HUD”

switch comes on.

The display position and bright-

ness adjustment screen is auto-

matically displayed on the multi-

information display. (P. 157)

■ When the head-up display is on

Display items can be switched by pressing the “HUD” switch.

1

2

Vehicle speed display and

cruise control display*

Vehicle speed display and

Hybrid System Indicator*

Refer to P. 127 for details of the

Hybrid System Indicator.

3

No display (head-up display

is off)

The indicator light on the “HUD”

switch turns off.

*: When the insert display of each

driving support system is dis-

played, the display is temporar-

ily turned off.

PRIUS_OM_OM47D44U_(U)

157

2. Instrument cluster

Display position and brightness adjustment

In order to improve the visibility of the head-up display, the display

position and brightness can be adjusted.

1

Displaying the adjustment screen on the multi-information display.

When the head-up display is on:

Select

on the

screen of the multi-information dis-

play, and then press

. (P. 149)

2

When the head-up display is off:

When the “HUD” switch is pressed, the adjustment screen for the

head-up display automatically displays.*¹

If an adjustment operation is not performed for approximately 6 seconds*²,

the multi-information display automatically returns to the previous screen.

2

Adjusting the display position and brightness by operating the

meter control switches.

When

or

is pressed, the

position of the head-up display

changes.

When

or

is pressed, the

brightness of the head-up display

changes.

When the

is pressed, the multi-

information display returns to the

previous screen.

*¹: This function can be turned off. (P. 151)

*²: The adjustment screen may suddenly be canceled if it is interrupted by a

warning message shown on the display.

PRIUS_OM_OM47D44U_(U)

158

Insert display

2. Instrument cluster

■ Insert displays of the driving support systems

Insert displays are linked with the operation of the following sys-

tems and used to show some of the information shown on the multi-

information display on the head-up display.

System

Displayed information

Pre-collision warning

PCS (Pre-Collision System)* (P. 292)

Lane departure alert function

display

LDA (Lane Departure Alert with steering Hands off steering wheel warn-

^control)* (P. 304)

ing

Vehicle sway warning function

display

Dynamic radar cruise control with full-

^{speed range}* (P. 315)

Approach warning display

Parking Support Brake function*

Operation display

(symbol display)

(P. 361)

*: If equipped

■ Master warning light insert display

When the master warning light

(P. 583) is illuminated or

flashing, an insert display is

shown on the head-up display

to inform the driver.

When the master warning light

is illuminated or flashing, check

the message displayed on the

multi-information display and

perform the corresponding trou-

bleshooting procedure.

(P. 591)

PRIUS_OM_OM47D44U_(U)

159

2. Instrument cluster

Route guidance display (vehicles with navigation system)

When the navigation system route guidance is set, convenient route

guidance is displayed.

When approaching an intersec-

tion, the shape of the intersection

and the remaining distance to the

intersection*¹are displayed.

Once the vehicle is within a fixed

distance from the intersection, an

arrow animation*^{2, 3}is displayed

to inform the driver of which direc-

tion to proceed in.

2

*¹: While the animation is displayed, the remaining distance to the intersec-

tion is hidden.

*²: When the distance unit of the navigation system is “km” or “mile”, the ani-

mation does not display.

*³: If the vehicle is stopped while the animation is displayed, the arrow

begins flashing.

The route guidance display can be switched on and off as necessary.

(P. 678)

Speed limit display (if equipped) (U.S.A. only)

Displays the speed limit for the

current road.

The speed limit display settings can be changed. (P. 151)

PRIUS_OM_OM47D44U_(U)

160

2. Instrument cluster

■Enabling/disabling of the head-up display

When the head-up display is turned off with the “HUD” switch, it is not dis-

played until the “HUD” switch is used to turn the head-up display on again.

(Operation of the head-up display is not linked with the power switch.)

■Display brightness

●The brightness of the head-up display is automatically adjusted according to

the operation status of the headlights (on/off) and the brightness of the sur-

roundings.

●When the brightness of the head-up display is adjusted to a certain level or

higher, the display automatically dims when the vehicle is stopped. Once the

vehicle starts off and the vehicle speed reaches approximately 3.1 mph

(5 km/h) or more, the display automatically returns to its previous bright-

ness.

■Vehicle speed display

In extremely cold environments, the display of the speedometer and the vehi-

cle speed of the head-up display may slightly differ.

■Head-up display

The head-up display may seem dark and hard to see when viewed through

sunglasses, especially polarized sunglasses.

■When the 12-volt battery is disconnected

The customize settings of the head-up display will be reset.

■Route guidance display (vehicles with navigation system)

The route guidance is not displayed on both the head-up display and multi-

information display simultaneously. When the route guidance is displayed on

the head-up display, the multi-information display does not display the route

guidance even if the navigation system-linked display (P. 143) is selected

on the multi-information display.

PRIUS_OM_OM47D44U_(U)

161

2. Instrument cluster

WARNING

■Before using the head-up display

●Check that the position and brightness of the head-up display image does

not interfere with safe driving. Incorrect adjustment of the image’s position

or brightness may obstruct the driver’s view and lead to an accident,

resulting in death or serious injury.

●Do not continuously look at the head-up display while driving as you may

fail to see pedestrians, objects on the road, etc. ahead of the vehicle.

2

NOTICE

■To prevent damage to components

●Do not place any drinks near the head-

up display projector. If the projector gets

wet, electrical malfunctions may result.

Display projector

●Do not place anything on or put stickers

onto the head-up display projector.

Doing so could interrupt head-up dis-

play indications.

●Do not touch the inside of the head-up

display projector or thrust sharp edges

or the like into the projector.

Doing so could cause mechanical mal-

functions.

PRIUS_OM_OM47D44U_(U)

162

2. Instrument cluster

Energy monitor/consumption screen

(vehicles with 7-inch display)

You can view the status of your vehicle on the multi-information

display and the audio system screen*.

*: For multimedia system

◆ Multi-information display

P. 122

◆ Audio system screen

Display the energy monitor, trip information or history screen.

1

Press the “MENU” button.

2

Select “Info” on the “Menu” screen.

3

Select “ECO” on the “Information” screen.

PRIUS_OM_OM47D44U_(U)

163

2. Instrument cluster

Energy monitor

If a screen other than “Energy monitor” is displayed, select “Energy”.

 2WD models

Audio system screen

When the vehicle is powered by

the electric motor (traction

motor)

2

When the vehicle is powered by

both the gasoline engine and

the electric motor (traction

motor)

When the vehicle is powered by

the gasoline engine

PRIUS_OM_OM47D44U_(U)

164

2. Instrument cluster

Audio system screen

When the vehicle is charging

the hybrid battery (traction bat-

tery)

When there is no energy flow

Low

Full

Hybrid battery (traction battery)

status

These images are examples only, and may vary slightly from actual

conditions.

PRIUS_OM_OM47D44U_(U)

165

2. Instrument cluster

Audio system screen

 AWD models

When the vehicle is powered by

the electric motor (traction

motor)

2

When the vehicle is powered by

both the gasoline engine and

the electric motor (traction

motor)

When the vehicle is powered by

the gasoline engine

PRIUS_OM_OM47D44U_(U)

166

2. Instrument cluster

Audio system screen

When the vehicle is charging

the hybrid battery (traction bat-

tery)

When there is no energy flow

Low

Full

Hybrid battery (traction battery)

status

These images are examples only, and may vary slightly from actual

conditions.

PRIUS_OM_OM47D44U_(U)

167

2. Instrument cluster

Fuel consumption

■ Trip information

If a screen other than “Trip information” is displayed, select “Trip

information”.

1

Fuel consumption in the past

15 minutes

2

Regenerated energy in the

past 15 minutes

2

One

symbol indicates 30 Wh.

Up to 5 symbols are shown.

Current fuel consumption

3

4

Resetting the consumption

data

5

6

7

Average vehicle speed since the hybrid system was started

Elapsed time since the hybrid system was started

Cruising range

Average fuel consumption for the past 15 minutes is divided by

color into past averages and averages attained since the power

switch was last turned to ON mode. Use the displayed average fuel

consumption as a reference.

The image is an example only, and may vary slightly from actual

conditions.

PRIUS_OM_OM47D44U_(U)

168

■ History

If a screen other than “History” is displayed, select “History”.

2. Instrument cluster

1

Best recorded fuel consump-

tion

2

3

Latest fuel consumption

Previous fuel consumption

record

Displays the daily average fuel

consumption. (Instead of the

date, “Trip 1” through “Trip 5” will

be displayed.)

4

5

Updating the latest fuel consumption data

Resetting the history data

The average fuel consumption history is divided by color into past

averages and the average fuel consumption since the last updated.

Use the displayed average fuel consumption as a reference.

The image is an example only, and may vary slightly from actual

conditions.

■Updating the history data

Update the latest fuel consumption by selecting “Clip” to measure the current

fuel consumption again.

■Resetting the data

The fuel consumption data can be deleted by selecting “Clear”.

■Cruising range

Displays the estimated maximum distance that can be driven with the quan-

tity of fuel remaining.

This distance is computed based on your average fuel consumption. As a

result, the actual distance that can be driven may differ from that displayed.

PRIUS_OM_OM47D44U_(U)

169

2. Instrument cluster

Energy monitor/consumption screen

(vehicles with 11.6-inch display)

You can view the status of your vehicle on the multi-information

display and the audio system screen*.

*: For navigation system

◆ Multi-information display

P. 122

2

◆ Audio system screen

■ Display the energy monitor, trip information or past record

screen

1

Press the “MENU” button.

2

Select “Info” on the screen

3

Display the “Energy monitor”,

“Trip information” or “Past

record” screen.

1

“Energy Monitor”:

Select “Energy” on the

screen.

2

“Trip Information” or “Past

Record” screen:

Select “Past Record” on

the screen.

“Trip Information” or “Past Record” screen will be displayed.

Press the “HOME” button and select “Info” on the screen. You can

select “Energy” and “Past Record”.

PRIUS_OM_OM47D44U_(U)

170

2. Instrument cluster

■ Display the power consumption of the air conditioner

1

Display “Energy Monitor” screen.

2

Select

on the upper right screen.

When you select the “”, and close the screen.

How to read the energy monitor

■ Function summary

The energy monitor can be used to check the vehicle drive status,

hybrid system operation status and energy regeneration status.

■ Flow of energy and display details

When energy is flowing, an arrow appears and a bright point of light

moves to show the direction of the flow of energy. When energy is

not flowing, the bright point of light are not displayed.

● The display when the engine is operating is in blue while the

engine is being warmed up and yellow afterwards.

● The arrow from the engine to the motor and tires is displayed in

red.

● The arrow indicating energy consumption is displayed in yellow

and the arrow indicating energy regeneration or charging is dis-

played in green. Also, the hybrid battery (traction battery)

changes color accordingly.

● There are icons

,

on the lower side of the

screen. The screen switches to each point of view when you

select it.

● When you select

, this screen is displayed in the lower half of

the screen, it will be displayed together with the navigation

screen.

● These images are examples only, and may vary slightly from

actual conditions.

PRIUS_OM_OM47D44U_(U)

171

2. Instrument cluster

When the vehicle is powered by

both the gasoline engine and the

electric motor (traction motor)

When the vehicle is powered by the

electric motor (traction motor)

2

When the vehicle is powered by the

gasoline engine

When there is no energy flow

PRIUS_OM_OM47D44U_(U)

172

2. Instrument cluster

When the vehicle is charging the hybrid battery (traction battery)

Hybrid battery (traction battery) sta-

tus

Air Conditioning System use*

Low

Full

*: When the air conditioning compressor is not operating, an arrow does not

appear and the bright point of light are not displayed.

PRIUS_OM_OM47D44U_(U)

173

2. Instrument cluster

Fuel consumption

■ Trip information

If the “Trip Information” screen does not appear, select “Trip Infor-

mation”.

1

Previous fuel consumption

per minute

2

3

Current fuel consumption

Reset the trip information

data

2

4

Regenerated energy in the

past 15 minutes

One

Wh.

symbol indicates 30

Up to 5 symbols are shown.

5

6

7

8

“Past Record” screen appears

Cruising range

Elapsed time

Average vehicle speed

Average fuel consumption for the past 15 minutes is divided by color

into past averages and averages attained since the power switch was

last turned to ON mode. Use the displayed average fuel consumption as

a reference.

The image is an example only, and may vary slightly from actual condi-

tions.

PRIUS_OM_OM47D44U_(U)

174

■ Past record

2. Instrument cluster

1

Best recorded fuel consump-

tion

2

3

4

Average fuel consumption

Current fuel consumption

Previous fuel consumption

record

5

6

7

Reset the past record data

Update the past record data

“Trip Information” screen appears

The image is an example only, and may vary slightly from actual

conditions.

■Resetting the data

●Selecting “Clear” on the “Trip Information” screen will reset the trip informa-

tion data.

●Selecting “Clear” on the “Past Record” screen will reset the past record

data.

■Updating the past record data

Selecting “Update” on the “Past Record” screen will update the past record

data.

Also, the average fuel consumption displayed in the multi-information display

will be reset at the same time.

■Cruising range

Displays the estimated maximum distance that can be driven with the quan-

tity of fuel remaining.

This distance is computed based on your average fuel consumption. As a

result, the actual distance that can be driven may differ from that displayed.

PRIUS_OM_OM47D44U_(U)

Instrument cluster for Your Toyota Prius 4 Door Fourth Generation (2016-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals