Get Beforedriving -> 4-6. Favorite settings Guide for Toyota Prius 4 Door Fifth Generation (2023-2026)

231

4-6. Favorite settings

4-6.Favorite settings

Driving position m em -

*

Enabling easier driver

entry and exit (power easy

access system)

ory

*

: If equipped

This feature automatically

adjusts the positions of the

driver’s seat to make enter-

ing and exiting the vehicle

easier or to suit your prefer-

ences.

When My Settings is turned

on:

When all of the following have

been performed, the driver’s

seat is automatically adjusted to

a position that allows driver to

enter and exit the vehicle easily.

Driving positions for the

registered drivers (3 pat-

terns) and guest (1 pattern)

can be registered in My Set-

tings.

4

 The shift position has been

shifted to P.

When electronic key assign-

ment is registered for My

Settings, the driving posi-

tion for each driver can be

recalled (memory recall

function).

 The power switch has been

turned to OFF.

 The driver’s seat belt has

been unfastened.

When any of the following has

been performed, the driver’s

seat automatically returns to its

original position.

When My Settings is turned

off:

Up to 2 different driving

positions can be recorded.

 The power switch has been

turned to ACC or ON.

Each electronic key can be

registered to recall your pre-

ferred driving position

 The driver’s seat belt has

been fastened.

(memory recall function).

For details about My Set-

tings, refer to P.235.

■Operation of the power easy

access system

●When exiting the vehicle, the

power easy access system may

not operate if the seat is already

close to the rearmost position, etc.

●If the seat position is adjusted

232

4-6. Favorite settings

during power easy access system

operation, the automatic operation

will stop. (The seat will change to

manual operation.)

ten.

●If the seat position is adjusted

during or after the power easy

access system operation when

the driver is exiting the vehicle, the

power easy access system will not

operate when entering the vehi-

cle.

■Jam protection function

■ Recall procedure

If a person or object interferes while

the seat is moving automatically, the

operation will stop.

1 Check that the shift position

is in P.

■Customization

2 Turn the power switch to ON.

The seat movement amount set-

tings of the power easy access sys-

tem can be customized.

(Customizable features: P.618)

3 Press one of the buttons for

the driving position you want

to recall until the buzzer

sounds.

Recording/recalling a

driving position

■ Recording procedure

1 Check that the shift position

is in P.

2 Turn the power switch to ON.

3 Adjust the driver’s seat to the

desired positions.

4 While pressing the “SET” but-

ton, or within 3 seconds after

the “SET” button is pressed,

press button “1” or “2” until

the buzzer sounds.

■To stop the position recall oper-

ation part-way through

Perform any of the following:

●Press the “SET” button.

●Press button “1” or “2”.

●Operate any of the seat adjust-

ment switches.

If the selected button has already

been preset, the previously

recorded position will be overwrit-

■Jam protection function

If a person or object interferes while

the seat is moving automatically, the

operation will stop.

233

4-6. Favorite settings

■Using the voice control system

(if equipped)

WARNING

■Seat adjustment caution

The following operations can be

performed using the voice control

system:

Take care during seat adjustment

so that the seat does not strike

the rear passenger or squeeze

your body against the steering

wheel.

●Driving position registration

●Recalling the driving position (can

be operated only when the shift

position is in P)

Registering/recalling/can-

celing a driving position

to an electronic key

For details regarding the voice con-

trol system, refer to the “MULTIME-

DIA OWNER’S MANUAL”.

■Seat positions that can be

memorized (P.209)

(memory recall function)

The adjusted positions other than

the position adjusted by lumbar sup-

port switch can be recorded.

■ When My Settings is turned

off

 Registering procedure

4

■Operating the driving position

memory after turning the power

switch to OFF

Record your driving position to

button “1” or “2” before perform-

ing the following:

Recorded seat positions can be

activated up to 180 seconds after

the driver’s door is opened and

another 60 seconds after it is closed

again.

Carry only the electronic key

you want to register, and then

close the driver’s door.

■In order to correctly use the

driving position memory func-

tion

If 2 or more electronic keys are

in the vehicle, the driving posi-

tion cannot be recorded prop-

erly.

If a seat position is already in the

furthest possible position and the

seat is operated in the same direc-

tion, the recorded position may be

slightly different when it is recalled.

1 Check that the shift position

is in P.

■When recalling the driving posi-

tion

2 Turn the power switch to ON.

Take care when recalling the driving

position so that the head restraint

does not touch the ceiling.

3 Recall the driving position

that you want to record.

■When the recorded seat posi-

4 While pressing the recalled

button, press and hold the

door lock switch (either lock

or unlock) until the buzzer

sounds.

tion cannot be recalled

The seat position may not be

recalled in some situations when the

seat position is recorded in a certain

range. For details, contact your

Toyota dealer.

If the button could not be regis-

tered, the buzzer sounds continu-

234

4-6. Favorite settings

ously for approximately 3 seconds.

3 Turn the power switch to ON.

4 While pressing the “SET” but-

ton, press and hold the door

lock switch (either lock or

unlock) until the buzzer

sounds twice.

If the button could not be canceled,

the buzzer sounds continuously for

approximately 3 seconds.

■ When My Settings is turned

on (an individual is identi-

fied with an electronic key)

 Recall procedure

1 Make sure that the doors are

locked before recalling the

driving position. Carry the

electronic key that has been

registered to the driving posi-

tion, and then unlock and

open the driver’s door using

the smart key system or wire-

less remote control.

The driving positions can be

automatically recalled for each

registered driver by registering

electronic key assignments in

My Settings.

 Registering procedure

When the shift position is shifted to

P after driving the vehicle, the cur-

rent driving position will be

recorded.

The driver’s seat will move to a

position slightly behind the

recorded position in order to make

entering the vehicle easier.

 Recall procedure

If the driving position is in a position

that has already been recorded, the

driver’s seat will not move.

1 Carry only the electronic key

that has been assigned and

registered in My Settings,

and then unlock and open

the driver’s door using the

smart key system or wireless

remote control.

2 Turn the power switch to

ACC or ON, or fasten a seat

belt.

The driver’s seat will move to the

recorded position.

 Cancelation procedure

The driver’s seat will move to a

position slightly behind the

recorded position in order to make

entering the vehicle easier.

1 Carry only the key you want

to cancel and then close the

driver’s door.

If the driving position is in a position

that has already been recorded, the

driver’s seat will not move.

If 2 or more keys are in the vehicle,

the driving position cannot be can-

celed properly.

2 Turn the power switch to

ACC or ON.

2 Check that the shift position

is in P.

The driver’s seat will move to the

235

4-6. Favorite settings

recorded position.

My Settings

 Cancelation procedure

Initialize the driver registered set-

tings in My Settings.

Drivers are identified using

devices such as electronic

keys to store the driving

position and vehicle set-

tings for each. Then the

information can be recalled

the next time the vehicle is

driven.

For information on initializing driver

registered settings, refer to “MULTI-

MEDIA OWNER’S MANUAL”.

■Recalling the driving position

using the memory recall func-

tion

●Different driving positions can be

registered for each electronic key.

Therefore, the driving position that

is recalled may be different

depending on the key being car-

ried.

Authentication devices can

be assigned in advance to

drivers so that they can

drive using their preferred

settings.

4

●If the a door other than the driver’s

door is unlocked with the smart

key system, the driving position

cannot be recalled. In this case,

press the driving position button

which has been set.

Settings for 3 drivers can be

stored in My Settings.

For information on authenti-

cation devices registra-

tion/deletion, changing the

driver’s name, initializing

driver registered settings,

manually switching drivers

and deleting drivers regis-

tration, refer to the “MULTI-

MEDIA OWNER’S

■Jam protection function

If a person or object interferes while

the seat is moving automatically, the

operation will stop.

MANUAL”.

Types of assigned

authentication devices

An individual can be identified

using the following authentica-

tion devices.

 Electronic key

An individual is identified when the

smart key system detects their

electronic key. (P.203)

236

4-6. Favorite settings

recall.

 Digital Key (if equipped)

 Multimedia settings^*

An individual is identified when the

smart key system detects their Digi-

tal Key. (P.183)

When an individual is identified, the

multimedia system settings used

when the power switch was last

turned off are recalled.

 Bluetooth^®devices

An individual can be identified if the

®

 Vehicle settings^*(items that

can be set on the multi-infor-

mation display and Multime-

dia Display)

same Bluetooth device that was

used as a hands-free phone the

last time the vehicle was entered is

connected to the audio system.

If an individual is identified by

detecting an electronic key, identifi-

When an individual is identified, the

vehicle settings used when the

power switch was last turned off are

recalled.

®

cation by Bluetooth device will not

be performed.

®

*

Bluetooth is a registered trade-

mark of Bluetooth SIG, Inc.

: Some settings are excluded

Recalled functions

When an individual is identified

from an authentication device,

settings for the following func-

tions are recalled.

 Driving position (memory

recall function) (if equipped)

After an individual is identified, the

driving position that was set when

driving was last completed is

recalled when either of the follow-

ing operations is performed.

• Identification using electronic key:

The door is unlocked and opened

using the smart key system or

wireless remote control.

• Identification using Digital Key (if

equipped): The door is unlocked

and opened using the smart key

system.

Refer to P.232 for information on

driving position registration and

Beforedriving -> 4-6. Favorite settings for Your Toyota Prius 4 Door Fifth Generation (2023-2026)

Related Topics

Beforedriving

Popular Owner Manuals

Latest Owner Manuals