Get Vehiclespecifications Guide for Toyota Prius 4 Door Fifth Generation (2023-2026)

599

Vehicle specifications

9

9-1. Specifications

Maintenance data (fuel, oil

level, etc.).................. 600

Fuel information .......... 607

Tire information........... 609

9-2. Customization

Customizable features 618

9-3. Initialization

Items to initialize ......... 634

9

600

9-1. Specifications

9-1.Specifications

Maintenance data (fuel, oil level, etc.)

Dimensions and weights

Overall length

Overall width

181.1 in. (4599 mm)

70.2 in. (1782 mm)

 Vehicles with 17-inch tires

55.9 in. (1420 mm)

 Vehicles with 19-inch tires

*

Overall height

Wheelbase

56.3 in. (1430 mm)

108.3 in. (2750 mm)

61.5 in. (1563 mm)

Front

Rear

 Vehicles with 17-inch tires

Tread

62.17 in. (1579 mm)

 Vehicles with 19-inch tires

62.20 in. (1580 mm)

Vehicle capacity weight (Occupants +

luggage)

860 lb. (390 kg)

*

: Unladen vehicle

Seating capacity

5 (Front 2, Rear 3)

Vehicle identification

■ Vehicle identification num-

ber

the instrument panel.

The vehicle identification num-

ber (VIN) is the legal identifier

for your vehicle. This is the pri-

mary identification number for

your Toyota. It is used in regis-

tering the ownership of your

vehicle.

This number is on the top left of

This number is also stamped

601

9-1. Specifications

■ Engine number

under the right-hand front seat.

The engine number is stamped

on the engine block as shown.

This number is also on the Certi-

fication Regulation Label.

Engine

Model

2.0 L 4-cylinder (M20A-FXS)

Type

4-cylinder in line, 4-cycle, gasoline

3.17  3.84 in. (80.5  97.6 mm)

Bore and stroke

Displacement

Valve clearance

3

121.3 cu.in. (1987 cm )

Automatic adjustment

9

Fuel

Fuel type

Unleaded gasoline only

87 (Research Octane Number 91) or

higher

Octane Rating

Fuel tank capacity (Reference) 10.6 gal. (40 L, 8.8 Imp.gal.)

602

Electric motor (traction motor)

9-1. Specifications

Type

Permanent magnet synchronous motor

Maximum output

Maximum torque

120 kW

153.4 ft•lbf (208 N•m, 21.2 kgf•m)

Hybrid battery (traction battery)

Type

Lithium-ion battery

Voltage

3.7 V/cell

51.0 Ah

72 cells

266.4 V

Capacity

Quantity

Nominal voltage

Lubrication system

■ Oil capacity (Drain and refill  reference^*)

With filter

4.1 qt. (3.9 L, 3.4 Imp. qt.)

3.7 qt. (3.5 L, 3.1 Imp. qt.)

Without filter

*

: The engine oil capacity is a reference quantity to be used when changing

the engine oil. When actually adding the engine oil, make sure that the oil

level is between the low level mark and refill upper limit mark (P.506).

Warm up and turn off the hybrid system, wait about 5 minutes, and check

the oil level on the dipstick.

■ Engine oil selection

SAE 0W-16

“Toyota Genuine Motor Oil” is

used in your Toyota vehicle.

Use Toyota approved “Toyota

Genuine Motor Oil” or equiva-

lent to satisfy the following

grade and viscosity.

SAE 0W-16 is the best choice

for good fuel economy and good

starting in cold weather.

If SAE 0W-16 is not available,

SAE 0W-20 oil may be used.

However, it must be replaced

with SAE 0W-16 at the next oil

change.

Oil grade:

ILSAC GF-6B multigrade engine

oil

Recommended viscosity:

603

9-1. Specifications

oil when the oil is at high tem-

perature. An oil with a higher

viscosity (one with a higher

value) may be better suited if

the vehicle is operated at high

speeds, or under extreme

load conditions.

How to read oil container label:

API registered mark is added to

some oil containers to help you

select the oil you should use.

A

Outside temperature

Oil viscosity (0W-16 is explained

here as an example):

• The 0W in 0W-16 indicates

the characteristic of the oil

which allows cold startability.

Oils with a lower value before

the W allow for easier starting

of the engine in cold weather.

• The 16 in 0W-16 indicates the

viscosity characteristic of the

Cooling system

Gasoline engine 6.4 qt. (6.1 L, 5.4 Imp. qt.)

Power control unit 1.7 qt. (1.6 L, 1.4 Imp. qt.)

*

Capacity

Use either of the following:

 “Toyota Super Long Life Coolant”

 Similar high-quality ethylene gly-

col-based non-silicate, non-amine,

non-nitrite, and non-borate cool-

ant with long-life hybrid organic

acid technology

Coolant type

9

Do not use plain water alone.

*

: The coolant capacity is the quantity of reference.

If replacement is necessary, contact your Toyota dealer.

604

Ignition system (spark plug)

9-1. Specifications

Make

Gap

DENSO FC16HR-Q8

0.031 in. (0.8 mm)

NOTICE

■Iridium-tipped spark plugs

Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.

Electrical system (12-volt Battery)

12.0 V or higher

(Turn the power switch to OFF and turn on

Open voltage at 68°F (20°C): the high beam headlights for 30 seconds.)

If the voltage is lower than the standard

value, charge the battery.

Charging rates (Slow charge) 5 A max.

Hybrid transmission

*

3.9 qt. (3.7 L, 3.2 Imp. qt.)

Fluid capacity

Fluid type

Toyota Genuine e-Transaxle fluid TE

*

: The fluid capacity is the quantity of reference.

If replacement is necessary, contact your Toyota dealer.

NOTICE

■Hybrid transmission fluid type

Using transmission fluid other than the above type may cause abnormal

noise or vibration, or ultimately damage the transmission of your vehicle.

Brakes

*1

5.2 in. (132 mm) Min.

Pedal clearance

Pedal free play

0.04  0.24 in. (1.0  6.0 mm)

605

9-1. Specifications

 Front

0.06 in. (1.5 mm)

 Rear

Brake pad wear limit

0.08 in. (2.0 mm)

When pushing the parking brake switch for

1 to 2 seconds: turns off

*2

Parking brake indicator

When pulling the parking brake switch for

1 to 2 seconds: comes on

FMVSS No.116 DOT 3 or SAE J1703

FMVSS No.116 DOT 4 or SAE J1704

Fluid type

*1

:Minimum pedal clearance when depressed with a force of 67.4 lbf (300

N, 30.6 kgf) while the hybrid system is operating.

When performing the brake pedal inspection, also be sure to check that the

brake system warning light is not illuminated when the hybrid system is

operating. (If the brake system warning light is illuminated, refer to P.555.)

*2

:Make sure to confirm that the brake system warning light (yellow) does

not illuminate. (If the brake system warning light illuminates, refer to

P.555.)

Steering

Free play

Less than 1.2 in. (30 mm)

Tires and wheels

 Vehicles with 17-inch tires

Tire size

195/60R17 90H

Front:

9

2

36 psi (250 kPa, 2.5 kgf/cm or bar)

Rear:

Tire inflation pressure (Recom-

mended cold tire inflation pres-

sure)

2

35 psi (240 kPa, 2.4 kgf/cm or bar)

Spare:

None

Wheel size

17  6 1/2J

Wheel nut torque

76 ft•lbf (103 N•m, 10.5 kgf•m)

606

9-1. Specifications

 Vehicles with 19-inch tires

Tire size

195/50R19 88H

Front:

2

35 psi (240 kPa, 2.4 kgf/cm or bar)

Rear:

2

33 psi (230 kPa, 2.3 kgf/cm or bar)

Spare:

None

Tire inflation pressure (Recom-

mended cold tire inflation pres-

sure)

Driving at high speeds (above 100 mph

[160 km/h]) (in countries where such

speeds are permitted by law):

2

Add 3 psi (20 kPa, 0.2 kgf/cm or bar) to

the front tires and rear tires.

Never exceed the maximum cold tire infla-

tion pressure indicated on the tire sidewall.

Wheel size

19  6 1/2J

Wheel nut torque

76 ft•lbf (103 N•m, 10.5 kgf•m)

607

9-1. Specifications

■Recommendation of the use of

low emissions gasoline

Fuel information

Gasolines containing oxygenates

such as ethers and ethanol, as well

as reformulated gasolines, are avail-

able in some cities. These fuels are

typically acceptable for use, provid-

ing they meet other fuel require-

ments.

You must only use unleaded

gasoline in your vehicle.

Select octane rating 87

(Research Octane Number

91) or higher. Use of

Toyota recommends these fuels,

since the formulations allow for

reduced vehicle emissions.

unleaded gasoline with an

octane rating lower than 87

may result in engine knock-

ing. Persistent knocking

can lead to engine damage.

■Non-recommendation of the

use of blended gasoline

●Use only gasoline containing up to

15% ethanol.

At minimum, the gasoline you

use should meet the specifica-

tions of ASTM D4814 in the

U.S.A..

DO NOT use any flex-fuel or gas-

oline that could contain more than

15% ethanol, including from any

pump labeled E30 (30% ethanol

A

B

), E50 (50% ethanol

), E85

■Gasoline quality

C

(85% ethanol

) (which are only

In very few cases, driveability prob-

lems may be caused by the brand of

gasoline you are using. If driveability

problems persist, try changing the

brand of gasoline. If this does not

correct the problem, consult your

Toyota dealer.

some examples of fuel containing

more than 15% ethanol).

■Recommendation of the use of

gasoline containing detergent

additives

●Toyota recommends the use of

gasoline that contains detergent

additives to avoid the build-up of

engine deposits.

●If you use gasohol in your vehicle,

be sure that it has an octane rat-

ing no lower than 87.

9

●All gasoline sold in the U.S.A. con-

tains minimum detergent additives

to clean and/or keep clean intake

systems, per EPA’s lowest addi-

tives concentration program.

●Toyota does not recommend the

use of gasoline containing metha-

nol.

■Non-recommendation of the

use of gasoline containing MMT

●Toyota strongly recommends the

use of Top Tier Detergent Gaso-

line. For more information on Top

Tier Detergent Gasoline and a list

Some gasoline contains an octane

enhancing additive called MMT

(Methylcyclopentadienyl Manga-

of marketers, please go to the offi- nese Tricarbonyl).

cial website www.toptiergas.com.

Toyota does not recommend the

use of gasoline that contains MMT.

608

9-1. Specifications

If fuel containing MMT is used, your

emission control system may be

adversely affected.

■When refueling with gasohol

Take care not to spill gasohol. It

can damage your vehicle’s paint.

The malfunction indicator lamp on

the instrument cluster may come on.

If this happens, contact your Toyota

dealer for service.

■Notice about fuel

P.86

■If your engine knocks

●Consult your Toyota dealer.

●You may occasionally notice light

knocking for a short time while

accelerating or driving uphill. This

is normal and there is no need for

concern.

NOTICE

■Notice on fuel quality

●Do not use improper fuels. If

improper fuels are used, the

engine will be damaged.

●Do not use leaded gasoline.

Leaded gasoline can cause

damage to your vehicle’s three-

way catalytic converters caus-

ing the emission control system

to malfunction.

●Do not use gasohol other than

the type previously stated.

Other gasohol may cause fuel

system damage or vehicle per-

formance problems.

●Using unleaded gasoline with

an octane number or rating

lower than the level previously

stated will cause persistent

heavy knocking.

At worst, this will lead to engine

damage.

■Fuel-related poor driveability

If poor driveability (poor hot start-

ing, vaporization, engine knock-

ing, etc.) is encountered after

using a different type of fuel, dis-

continue the use of that type of

fuel.

609

9-1. Specifications

Tire inform ation

Typical tire symbols

A

Tire size (P.610)

B

C

D

DOT and Tire Identification Number (TIN) (P.610)

Location of treadwear indicators (P.513)

Tire ply composition and materials

Plies are layers of rubber-coated parallel cords. Cords are the strands

which form the plies in a tire.

E

Radial tires or bias-ply tires

A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL” is a

bias-ply tire.

F

TUBELESS or TUBE TYPE

A tubeless tire does not have a tube and air is directly put into the tire. A

tube type tire has a tube inside the tire and the tube maintains the air pres-

sure.

9

G

Load limit at maximum cold tire inflation pressure (P.613)

H

Maximum cold tire inflation pressure (P.613)

This means the pressure to which a tire may be inflated.

I

Uniform tire quality grading

For details, see “Uniform Tire Quality Grading” that follows.

J

Summer tires or all season tires (P.514)

An all season tire has “M+S” on the sidewall. A tire not marked “M+S” is a

610

9-1. Specifications

summer tire.

 Type B

Typical DOT and Tire

Identification Number

(TIN)

 Type A

DOT symbol^*

A

B

Tire Identification Number

(TIN)

C

Tire manufacturer’s identifi-

cation mark

DOT symbol^*

A

B

Tire Identification Number

(TIN)

D

E

F

Manufacturer’s code

Manufacturing week

Manufacturing year

C

Tire manufacturer’s identifi-

cation mark

*

: The DOT symbol certifies that the

tire conforms to applicable Fed-

eral Motor Vehicle Safety Stan-

dards.

D

Tire size code

E

Manufacturer’s optional tire

type code (3 or 4 letters)

F

Manufacturing week

Tire size

G

Manufacturing year

*

■ Typical tire size information

: The DOT symbol certifies that the

tire conforms to applicable Fed-

eral Motor Vehicle Safety Stan-

dards.

The illustration indicates typical

tire size.

611

9-1. Specifications

A

Tire use

(P = Passenger car,

T = Temporary use)

Tire section names

B

C

Section width (millimeters)

Aspect ratio

(tire height to section width)

D

Tire construction code

(R = Radial, D = Diagonal)

E

F

Wheel diameter (inches)

A

Bead

Load index (2 digits or 3 dig-

its)

B

C

D

E

F

G

H

I

Sidewall

Shoulder

Tread

G

Speed symbol (alphabet with

one letter)

■ Tire dimensions

Belt

Inner liner

Reinforcing rubber

Carcass

Rim lines

Bead wires

Chafer

J

K

A

Section width

Uniform Tire Quality

Grading

B

Tire height

C

Wheel diameter

9

This information has been pre-

pared in accordance with regu-

lations issued by the National

Highway Traffic Safety Adminis-

tration of the U.S. Department of

Transportation.

It provides the purchasers

and/or prospective purchasers

of Toyota vehicles with informa-

tion on uniform tire quality grad-

612

9-1. Specifications

ing.

conditions on specified govern-

ment test surfaces of asphalt

and concrete.

Your Toyota dealer will help answer

any questions you may have as you

read this information.

A tire marked C may have poor

traction performance.

■ DOT quality grades

Warning: The traction grade

assigned to this tire is based on

braking (straight ahead) traction

tests and does not include corner-

ing (turning) traction.

All passenger vehicle tires must

conform to Federal Safety

Requirements in addition to

these grades. Quality grades

can be found where applicable

on the tire sidewall between

tread shoulder and maximum

section width.

■ Temperature A, B, C

The temperature grades are A

(the highest), B, and C, repre-

senting the tire’s resistance to

the generation of heat and its

ability to dissipate heat when

tested under controlled condi-

tions on a specified indoor labo-

ratory test wheel.

For example: Treadwear 200 Trac-

tion AA Temperature A

■ Treadwear

The treadwear grade is a com-

parative rating based on the

wear rate of the tire when tested

under controlled conditions on a

specified government test

course.

Sustained high temperature can

cause the material of the tire to

degenerate and reduce tire life, and

excessive temperature can lead to

sudden tire failure.

For example, a tire graded 150

would wear one and a half (1 - 1/2)

times as well on the government

course as a tire graded 100.

Grade C corresponds to a level of

performance which all passenger

car tires must meet under the Fed-

eral Motor Vehicle Safety Standard

No. 109.

The relative performance of tires

depends upon the actual conditions

of their use. Performance may dif-

fer significantly from the norm due

to variations in driving habits, ser-

vice practices and differences in

road characteristics and climate.

Grades B and A represent higher

levels of performance on the labo-

ratory test wheel than the minimum

required by law.

Warning: The temperature grades

of a tire assume that it is properly

inflated and not overloaded.

■ Traction AA, A, B, C

The traction grades, from high-

est to lowest, are AA, A, B and

C, and they represent the tire’s

ability to stop on wet pavement

as measured under controlled

Excessive speed, underinflation, or

excessive loading, either sepa-

rately or in combination, can cause

heat buildup and possible tire fail-

ure.

613

9-1. Specifications

Glossary of tire terminology

Tire related term

Meaning

Tire pressure when the vehicle has been parked

for three hours or more, or has not been driven

more than 1 mile or 1.5 km under that condition

Cold tire inflation pres-

sure

The maximum cold inflated pressure to which a

tire may be inflated, shown on the sidewall of

the tire

Maximum inflation pres-

sure

Recommended inflation Cold tire inflation pressure recommended by a

pressure

manufacturer

The combined weight (in excess of those stan-

dard items which may be replaced) of hybrid

transmission, power steering, power brakes,

power windows, power seats, radio and heater,

to the extent that these items are available as

factory-installed equipment (whether installed or

not)

Accessory weight

The weight of a motor vehicle with standard

equipment, including the maximum capacity of

fuel, oil and coolant, and if so equipped, air con-

ditioning and additional weight optional engine

Curb weight

The sum of:

(a) Curb weight

(b) Accessory weight

(c) Vehicle capacity weight

(d) Production options weight

Maximum loaded vehicle

weight

150 lb. (68 kg) times the number of occupants

*

Normal occupant weight

Occupant distribution

specified in the second column of Table 1 that

follows

9

Distribution of occupants in a vehicle as speci-

*

fied in the third column of Table 1 below

The combined weight of installed regular pro-

duction options weighing over 5 lb. (2.3 kg) in

excess of the standard items which they

Production options weight replace, not previously considered in curb

weight or accessory weight, including heavy

duty brakes, ride levelers, roof rack, heavy duty

battery, and special trim

614

9-1. Specifications

Tire related term

Meaning

A metal support for a tire or a tire and tube

assembly upon which the tire beads are seated

Rim

Rim diameter

(Wheel diameter)

Nominal diameter of the bead seat

Rim diameter and width

Rim size designation

The industry manufacturer’s designation for a

rim by style or code

Rim type designation

Rim width

Nominal distance between rim flanges

The rated cargo and luggage load plus 150 lb.

(68 kg) times the vehicle’s designated seating

capacity

Vehicle capacity weight

(Total load capacity)

The load on an individual tire that is determined

by distributing to each axle its share of the max-

imum loaded vehicle weight, and dividing by two

Vehicle maximum load on

the tire

The load on an individual tire that is determined

by distributing to each axle its share of curb

weight, accessory weight, and normal occupant

Vehicle normal load on

the tire

*

weight (distributed in accordance with Table 1

below), and dividing by two

The surface area of the rim not covered by the

inflated tire

Weather side

Bead

The part of the tire that is made of steel wires,

wrapped or reinforced by ply cords and that is

shaped to fit the rim

A breakdown of the bond between components

in the bead

Bead separation

A pneumatic tire in which the ply cords that

extend to the beads are laid at alternate angles

substantially less than 90 degrees to the center-

line of the tread

Bias ply tire

Carcass

The tire structure, except tread and sidewall

rubber which, when inflated, bears the load

The breaking away of pieces of the tread or

sidewall

Chunking

Cord

The strands forming the plies in the tire

615

9-1. Specifications

Tire related term

Cord separation

Meaning

The parting of cords from adjacent rubber com-

pounds

Any parting within the tread, sidewall, or inner-

liner of the tire extending to cord material

Cracking

A pneumatic tire with an inverted flange tire and

rim system in which the rim is designed with rim

flanges pointed radially inward and the tire is

designed to fit on the underside of the rim in a

manner that encloses the rim flanges inside the

air cavity of the tire

CT

A tire designed to operate at higher loads and at

higher inflation pressures than the correspond-

ing standard tire

Extra load tire

Groove

The space between two adjacent tread ribs

The layer(s) forming the inside surface of a

tubeless tire that contains the inflating medium

within the tire

Innerliner

The parting of the innerliner from cord material

in the carcass

Innerliner separation

(a)The sidewall that contains a whitewall, bears

white lettering, or bears manufacturer, brand,

and/or model name molding that is higher or

deeper than the same molding on the other

sidewall of the tire, or

Intended outboard side-

wall

(b)The outward facing sidewall of an asymmetri-

cal tire that has a particular side that must

always face outward when mounted on a vehi-

cle

9

A tire designated by its manufacturer as primar-

ily intended for use on lightweight trucks or mul-

tipurpose passenger vehicles

Light truck (LT) tire

The maximum load that a tire is rated to carry

for a given inflation pressure

Load rating

The load rating for a tire at the maximum per-

missible inflation pressure for that tire

Maximum load rating

Maximum permissible

inflation pressure

The maximum cold inflation pressure to which a

tire may be inflated

616

9-1. Specifications

Tire related term

Meaning

The rim on which a tire is fitted for physical

dimension requirements

Measuring rim

Any parting at any junction of tread, sidewall, or

innerliner that extends to cord material

Open splice

Outer diameter

The overall diameter of an inflated new tire

The linear distance between the exteriors of the

sidewalls of an inflated tire, including elevations

due to labeling, decorations, or protective bands

or ribs

Overall width

A tire intended for use on passenger cars, multi-

purpose passenger vehicles, and trucks, that

have a gross vehicle weight rating (GVWR) of

10,000 lb. or less.

Passenger car tire

Ply

A layer of rubber-coated parallel cords

A parting of rubber compound between adjacent

plies

Ply separation

A mechanical device made of rubber, chemi-

cals, fabric and steel or other materials, that,

when mounted on an automotive wheel, pro-

vides the traction and contains the gas or fluid

that sustains the load

Pneumatic tire

A pneumatic tire in which the ply cords that

extend to the beads are laid at substantially 90

degrees to the centerline of the tread

Radial ply tire

Reinforced tire

Section width

A tire designed to operate at higher loads and at

higher inflation pressures than the correspond-

ing standard tire

The linear distance between the exteriors of the

sidewalls of an inflated tire, excluding elevations

due to labeling, decoration, or protective bands

That portion of a tire between the tread and

bead

Sidewall

The parting of the rubber compound from the

cord material in the sidewall

Sidewall separation

617

9-1. Specifications

Tire related term

Meaning

A tire that attains a traction index equal to or

greater than 110, compared to the ASTM E-

1136 Standard Reference Test Tire, when using

the snow traction test as described in ASTM F-

1805-00, Standard Test Method for Single

Wheel Driving Traction in a Straight Line on

Snow-and Ice-Covered Surfaces, and which is

Snow tire

marked with an Alpine Symbol ( ) on at least

one sidewall

The rim on which a tire is fitted for testing, and

may be any rim listed as appropriate for use

with that tire

Test rim

Tread

That portion of a tire that comes into contact

with the road

A tread section running circumferentially around

a tire

Tread rib

Tread separation

Pulling away of the tread from the tire carcass

The projections within the principal grooves

designed to give a visual indication of the

degrees of wear of the tread

Treadwear indicators

(TWI)

The fixture used to hold the wheel and tire

assembly securely during testing

Wheel-holding fixture

*

: Table 1  Occupant loading and distribution for vehicle normal load for

various designated seating capacities

Designated seating

capacity, Number of

occupants

Occupant distribution in

a normally loaded vehi-

cle

Vehicle normal load,

Number of occupants

9

2 through 4

2

3

2 in front

2 in front, 1 in second

seat

5 through 10

2 in front, 1 in second

seat, 1 in third seat, 1 in

fourth seat

11 through 15

16 through 20

5

7

2 in front, 2 in second

seat, 2 in third seat, 1 in

fourth seat

618

9-2. Customization

9-2.Customization

2 Select

on the Multimedia

Display, and then select

“Advanced Park”.

Customizable features

Your vehicle includes a vari-

ety of electronic features

that can be personalized to

your preferences. The set-

tings of these features can

be changed by using the

multi-information display,

the Multimedia Display or at

your Toyota dealer.

■ Changing by using the

multi-information display

Use the meter control switches

to change settings. (P.162)

1 Operate the meter control

switch to select

(P.166)

.

2 Operate the meter control

switches to select the desired

item to be customized.

Some of the customizable

features are changed in

conjunction with the set-

tings of My Settings.

(P.235)

3 According to the display,

select the desired setting.

To go back to the previous screen

or exit the customize mode, press

Customizing vehicle fea-

tures

.

■ Changing by using the Mul-

■During customization

timedia Display

Stop the vehicle in a safe place,

apply the parking brake, and shift

the shift position to P. Also, to pre-

vent 12-volt battery discharge, leave

the hybrid system operating while

customizing the features.

 Except for Advanced Park

1 Select

on the main menu.

2 Select “Vehicle customize”

on the sub menu.

WARNING

3 Select the item to change the

■During customization

settings of from the list.

As the hybrid system needs to be

operating during customization,

ensure that the vehicle is parked

in a place with adequate ventila-

tion. In a closed area such as a

garage, exhaust gases including

harmful carbon monoxide (CO)

may collect and enter the vehicle.

This may lead to death or a seri-

ous health hazard.

Various setting can be changed.

Refer to the list of settings that can

be changed for details.

For functions that can be turned

on/off, select

(OFF).

(ON)/

 For Advanced Park (if

equipped)

1 Press the Advanced Park

main switch.

619

9-2. Customization

NOTICE

■During customization

To prevent 12-volt battery dis-

charge, ensure that the hybrid

system is operating while custom-

izing features.

Customizable features

Some function settings are changed simultaneously with other func-

tions being customized. Contact your Toyota dealer for further

details.

A

Settings that can be changed using the Multimedia Display

B

Settings that can be changed using the multi-information display

C

Settings that can be changed by your Toyota dealer

Definition of symbols: O = Available,  = Not available

■ Predictive efficient drive^*1(P.81)

Customized

Function

Default setting

A

B

C

setting

Predictive efficient drive

On

Off

O



*1

*2

:Vehicles with navigation system

*2

:This function can only be used in the mainland U.S.A. It cannot be used

in other states and territories, including Alaska and Hawaii.

■ Charging system (P.103, 119, 108)

Customized

setting

Function

Default setting

MAX

A

B

C

9

Charging current

8A



O



Auto Lock &

Unlock

Connector lock

Auto Lock



O



OFF

Off

“Battery Heater”

“Battery Cooler”

On



O



Off

620

9-2. Customization

■ Gauges, meters and multi-information display (P.155, 161)

Customized

setting

*1

Function

Default setting

English

A

B

C

Canadian

French

*2

Language



O



Mexican Span-

ish

km (km/L,

km/kWh)

miles (MPG

US,

miles/kWh)

*4

*3

Units

O



km (L/100km,

km/kWh)

Hybrid System Indicator

On

Off



O



*2

EV indicator

EV Energy

remaining

EV Distance

remaining

EV Drive Information



O



Eco Guidance (ECO Acceler-

*2

ator Guidance)

On

Off

Trip Average

Tank Average

Fuel Economy

Total Average



O



Power Consumption

Total Average Trip Average



O



Audio system linked dis-

*2

play

On

Off

*2

Drive information type

Trip

Total

Average

Speed

Drive information items (first

*2

item)

Distance



O



Total Time

Average

Speed

Drive information items (sec-

*2

ond item)

Total Time

Drive Info



Distance

Charging

Schedule

*2

Trip Summary



O

*2

Pop-up display

On

Off



*5

Calendar



 O

621

9-2. Customization

Customized

setting

*1

Function

Default settings

Default setting

A

B

C



O



On (when the

vehicle is

stopped)

Convenience Services (Sug-

*2

gestion function)

*6

On

O



O

Off

*1

*2

:For details about each function: P.166

:This setting changes in accordance with My Settings.

*3

*4

*5

:The setting can be changed on “General” of

:The default setting varies according to country.

.

:This can only be set if GPS calibration of clock is turned off in the Multi-

media Display settings.

*6

:The setting can be changed on “Notifications” of

.

■ Door lock (P.185, 587)

Customized

setting

Function

Default setting

A

B

C

Driver’s door

unlocked in

one step, all

doors

unlocked in

two step

All doors

unlocked in

one step

Unlocking using a mechani-

cal key



O

Off

Shift position

linked door

locking opera-

tion

Automatic door locking func-

*

Speed linked

door locking

operation

O



O

tion

9

Off

Shift position

linked door

unlocking

Driver’s door

linked door

unlocking

Automatic door unlocking

*

function

operation

*

: This setting changes in accordance with My Settings.

622

9-2. Customization

■ Rear seat reminder (P.188)

Customized

setting

Function

Default setting

A

B

C

Rear seat reminder func-

*

On

Off



O



tion

*

: This setting changes in accordance with My Settings.

■ Smart key system and wireless remote control (P.185, 191,

203)

Customized

setting

Function

Default setting

Standard

On

A

B

C

Operating signal (Buzz-

*

Desired volume O



O

ers)

Operation signal (Emer-

*

Off

O



O

gency flashers)

Time elapsed before auto-

matic door lock function is

activated if door is not

opened after being

Off

30 seconds

60 seconds



120 seconds

Off

*

unlocked

Open door warning

buzzer (When locking the

vehicle)

On



O

*

: This setting changes in accordance with My Settings.

■ Smart key system (P.185, 191, 203)

Customized

setting

Function

Default setting

A

B

C

*1

Smart door unlocking

Smart key system

Driver’s door

On

All the doors

Off

O



O



Time elapsed before

unlocking all the door

when gripping and holding

Off

2 seconds

1.5 seconds

2.5 seconds



O

*2

the driver’s door handle

Number of consecutive

door lock operations

As many as

desired

2 times

On



O

Power switch illumination

Off

623

9-2. Customization

:This setting changes in accordance with My Settings.

*1

*2

:This setting can be changed when the smart door unlocking setting is set

to Driver’s door.

■ Wireless remote control (P.180, 185, 191)

Customized

setting

Function

Default setting

A

B

C

Driver’s door

unlocked in one

All doors

step, all doors unlocked in one

*

Unlocking operation

O



O

unlocked in two

step

Locking operation when

*

On

Off

O



O

door opened

The function that activates

the

switch of the

On (Unlocking

all the door)

wireless remote control

when locking the door

(P.194)

On (Unlocking

back door only)

Theft deterrent panic

mode

On

Off

*

: This setting changes in accordance with My Settings.

■ Power back door^*1(P.194)

Customized

setting

Function

Default setting

A

B

C

Power back door operations

On

Off

Soft



O



Operation buzzer volume

Opening angle

Loud



O



Normal

1 to 4

9

5

*2

User setting

One short

press

switch of the wireless

remote control operation

Press and hold



O

Push twice

Off

624

9-2. Customization

Customized

setting

Function

Default setting

On

A

B

C

Power back door open oper-

ation when the back door

opener switch is pressed

Off



O

Back door closing assist

On

Off



O

Close & lock (walk away)

function

*1

:If equipped

*2

:The open position is set by the power back door switch. (P.202)

■ Enabling easier driver entry and exit (power easy access sys-

tem) ^*1(P.231)

Customized

setting

Function

Default setting

A

B

C

Driver’s seat slide move-

ment when exiting the

*2

vehicle

Off

Full

O



O

Partial

*1

:If equipped

*2

:This setting changes in accordance with My Settings.

■ Power windows (P.228)

Customized

setting

Function

Default setting

A

B

C

Mechanical key linked

operation (open)

Off

On



O

Mechanical key linked

operation (close)



O

Wireless remote control

linked operation (open)

Wireless remote control

linked operation signal

(buzzer)

On

Off



O

625

9-2. Customization

■ Power switch (P.254)

Function

Customized setting

A

B

C

ACC customization

Enabling/Disabling ACC

mode

On/Off

O



O

■ Regeneration Boost (P.260)

Customized

Function

Default setting

A

B

C

setting

Medium

High

Deceleration (regenera-

tive braking force)

Low

On



O



Deceleration Memory

Off

■ Reverse warning buzzer (P.256)

Customized

setting

Function

Default setting

Off

A

B

C

Signal (buzzer) when the

shift position is in R

On



O

■ Automatic light control system (P.269)

Customized

setting

Function

Default setting

On

A

B

C

*1, 2

Daytime running lights

Off

Brighter

Bright

O



O

*1

Light sensor sensitivity

Normal

O



O

Dark

9

Darker

Off

Time elapsed before

headlights automatically

turn off after doors are

30 seconds

On

60 seconds

90 seconds

O



O

*1

closed

Windshield wiper linked

headlight illumination

Off



*1

*2

:This setting changes in accordance with My Settings.

:Except for Canada

626

9-2. Customization

■ Driver monitor^*1(P.292)

Function

Customized setting

A

B

O

C

*2

Warning function

ON/OFF



*2

DMC Recording

*1

:If equipped

*2

:This setting changes in accordance with My Settings.

■ Pre-Collision System (P.293)

Function

Customized setting

A

B

O

C

Pre-Collision System

ON/OFF



*

Warning timing

Later/Default/Earlier

*

: This setting changes in accordance with My Settings.

■ Lane Change Assist^*1(P.310)

Function

Customized setting

ON/OFF

A

B

C

*2

Lane Change Assist



O



*1

:If equipped

*2

:This setting changes in accordance with My Settings.

■ Lane Departure Alert system (P.313)

Function

Customized setting

A

B

C

Lane Departure Alert sys-

*

ON/OFF



O



tem

*

Alert timing

Default/Earlier



O



*

Alert options

Vibration/Audible

*

: This setting changes in accordance with My Settings.

■ Driver break suggestion (P.313)

Function

Customized setting

ON/OFF

A

B

C

Driver break suggestion



O



627

9-2. Customization

■ Proactive Driving Assist (P.320)

Function

Customized setting

ON/OFF

A

B

C

Proactive Driving Assist

*



O



(PDA)

*

Support sensitivity

Low/Mid/High

ON/OFF



O



*

Steering Assist (SA)

*

Deceleration Assist (DA)

Obstacle Anticipation

ON/OFF



O



*

Assist (OAA)

*

: This setting changes in accordance with My Settings.

■ Front Cross Traffic Alert^*1(P.326)

Function

Customized setting

A

B

O

C

Front Cross Traffic Alert

ON/OFF



*2

Alert timing

Later/Default/Earlier

*1

:If equipped

*2

:This setting changes in accordance with My Settings.

■ Road Sign Assist^*1(P.329)

Function Customized setting

A

B

C

*2

Road Sign Assist

ON/OFF



O



Excess speed notification

*2

method

None/Visual/Visual & Audible



O



Other notifications

*2

method

None/Visual/Visual & Audible

9

Excess speed notification 5 mph (10 km/h) / 3 mph (5 km/h)

*2

level

/ 1 mph (2 km/h)

*1

:If equipped

*2

:This setting changes in accordance with My Settings.

628

9-2. Customization

■ Dynamic Radar Cruise Control (P.331)

Function

Customized setting

A

B

O

C

*

Extended Resume Time

ON/OFF

High/Mid/Low

ON/OFF



*

Acceleration setting

*

Guide message

*

Curve speed reduction

High/Mid/Low/OFF

*

: This setting changes in accordance with My Settings.

■ Traffic Jam Assist^*1(P.348)

Function

Customized setting

ON/OFF

A

B

C

*2

Traffic Jam Assist



O



Driver Monitor Camera

*2

Recording

ON/OFF



O



*1

:If equipped

*2

:This setting changes in accordance with My Settings.

■ BSM (Blind Spot Monitor)^*1(P.354)

Function

Customized setting

A

B

C

BSM (Blind Spot Monitor)

Outside rear view mirror

*2

indicator brightness

On/Off



O



Dim/Bright



O



Alert timing for presence

of approaching vehicle

*2

(sensitivity)

Late/Intermediate/Early

On/Off



O



*2

Buzzer warning

*1

:If equipped

*2

:This setting changes in accordance with My Settings.

■ Safe Exit Assist^*1(P.359)

Function

Customized setting

On/Off

A

B

C

Safe Exit Assist



O



629

9-2. Customization

Function

Customized setting

A

B

O

C

Outside rear view mirrors

*2

display

On/Off



*2

Detection sensitivity

Low/Mid/High

*1

:If equipped

*2

:This setting changes in accordance with My Settings.

■ Intuitive parking assist (P.363)

Customized

setting

Function

Default setting

On

A

B

C

Intuitive parking assist

Off



O



Buzzer volume of Intuitive

parking assist when oper-

*1

ating

Level1

Level2



O



O

Level3

Distance from which the

front center sensors start

detection

*2

Standard

Near

O

Distance from which the

rear center sensors start

detection

*2

Near

Distance from which the

corner sensors start

detection



O

*1

*3

:The sound volume is linked among the intuitive parking assist, RCTA ,

*3

and RCD .

*2

:For vehicles with panoramic view monitor, the setting can be changed on

the panoramic view monitor settings screen. For details, refer to “MULTI-

MEDIA OWNER’S MANUAL”. A setting changed at a Toyota dealer can-

not be further changed on the panoramic view monitor settings screen.

9

*3

:If equipped

■ RCTA (Rear Cross Traffic Alert) function^*3(P.373)

Function

Customized setting

On/Off

A

B

C

RCTA (Rear Cross Traffic

Alert)



O



Buzzer volume of RCTA

*1, 2

when operating

Level1/Level2/Level3



O



630

9-2. Customization

*1

:This setting changes in accordance with My Settings.

*2

:The sound volume is linked among the intuitive parking assist, RCTA,

*3

and RCD .

*3

:If equipped

■ RCD (Rear Camera Detection) function^*(P.378)

Customized

setting

Function

Default setting

On

A

B

C

RCD (Rear Camera

Detection) function

Off



O



*

: If equipped

■ PKSB (Parking Support Brake)^*(P.382)

Customized

setting

Function

Default setting

On

A

B

C

PKSB (Parking Support

Brake) function

Off



O

*

: If equipped

■ Toyota Teammate Advanced Park^*(P.395)

Customized

setting

Function

Remote Park

Default setting

On

A

B

C

Off

Slow

O



Vehicle speed during

operation

Standard

O



Fast

Distance to objects

Standard

Parallel

Far

O



Preferred parking method

Perpendicular

Preferred parking direc-

tion

Forward

Right

Left

Reverse

Left

O



Preferred exit direction

(perpendicular)

Preferred exit direction

(parallel)

Right

Camera view when park-

ing

Standard

Wide

O



Camera view when exiting

Standard

631

9-2. Customization

Customized

setting

Function

Default setting

0 (Centered)

A

B

C

-3 (Inward) to

O

Parking path adjustment



+3 (Outward)

Slightly narrow

Road width adjustment

Standard

O



Narrow

-3 (Rearward)

to +3 (Front-

ward)

Park position adjustment

(forward)

0 (Centered)

O

-3 (Rearward)

to +3 (Front-

ward)

Park position adjustment

(reverse)

0 (Centered)



3.9 in. (10 cm)

7.9 in. (20 cm)

11.8 in. (30 cm)

15.7 in. (40 cm)

Rear accessory setting

Off

O



Clear registered parking

space

-

*

: If equipped

■ Driving mode select switch (P.422)

Customized

setting

Function

Default setting

Normal

A

B

C

Sport

Eco

Powertrain control in cus-

tom mode

O



Steering wheel control in

custom mode

Normal

Sport

Eco

O



9

Air conditioning operation

in custom mode

■ Automatic air conditioning system (P.434)

Customized

setting

Function

Default setting

On

A

B

C

*

A/C auto switch operation

Off

O



O

*

: This setting changes in accordance with My Settings.

632

9-2. Customization

■ Illumination (P.446)

Customized

setting

Function

Default setting

15 seconds

A

B

C

Off

Time elapsed before the

*1

interior lights turn off

7.5 seconds

30 seconds

O



O

Operation after the power

switch is turned off

On

Off



O

Operation when the doors

are unlocked

Operation when you

approach the vehicle with

the electronic key on your

person

On

Off



O

*2

Footwell lights

On

Off



O

Instrument panel orna-

*2

ment lights

*2,

Illumination notification

3

On

Off



O

*1

:This setting changes in accordance with My Settings.

:If equipped

*2

*3

:If the instrument panel ornament lights is set to Off, this setting will also

be set to Off.

ting will not be reflected on the

■Vehicle customization

Multimedia Display until the power

switch is turned off and then

turned back to ON.

●When the smart key system is off,

the entry unlock function cannot

be customized.

●When the doors remain closed

after unlocking the doors and the

timer activated automatic door

lock function activates, signals will

be generated in accordance with

the operation buzzer volume and

operational signal (Emergency

flashers) function settings.

●Some settings can be changed

using a switch or the Multimedia

Display. If a setting is changed

using a switch, the changed set-

633

9-3. Initialization

9-3.Initialization

Items to initialize

The following items must be initialized for normal system

operation after such cases as the battery being reconnected,

or maintenance being performed on the vehicle:

List of the items to initialize

Item

When to initialize

Reference

P.199

• After reconnecting or chang-

ing the battery

• After changing a fuse

*

Power back door

Power windows

When functioning abnormally

P.228

P.495

Maintenance required

reminder message

• After the maintenance is

performed

After the maintenance is per-

formed

Oil maintenance

P.506

*

: If equipped

9

634

9-3. Initialization

Vehiclespecifications for Your Toyota Prius 4 Door Fifth Generation (2023-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals