2001-2005 Toyota Rav4 SUV Car audio system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Car audio system for Your Toyota Rav4 SUV Second Generation (2001-2005)

’03 Rav4_U (L/O 0208)  
SECTION 17  
OPERATION OF INSTRUMENTS AND  
CONTROLS  
Car audio system  
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110  
Using your audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110  
Car audio system operating hintsts . . . . . . . . . . . . . . . . . . . . . . . . . . . 122  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
109  
’03 Rav4_U (L/O 0208)  
Using your audio system—  
—Some basics  
Reference  
This section describes some of the basic  
features on Toyota audio systems. Some  
information may not pertain to your sys-  
tem.  
Your audio system works when the ignition  
key is in the “ACC” or “ON” position.  
TURNING THE SYSTEM ON AND OFF  
Push “PWR·VOL” to turn the audio system  
on and off.  
Push “AM”, “FM”, “FM1”, “FM2”, “TAPE” or  
“DISC” to turn on that function without  
pushing “PWR·VOL”. To turn on the cas-  
sette or compact disc player, a cassette  
or compact disc must be loaded in the  
player.  
Type 1: AM·FM radio/compact disc player  
(with compact disc changer controller)  
Type 2: AM·FM radio/cassette player/com-  
pact disc player (with compact disc  
changer controller)  
You can turn on each player by inserting  
a cassette tape or compact disc.  
You can turn off each player by ejecting  
the cassette tape or compact disc. If the  
audio system was previously off, then the  
entire audio system will be turned off  
when you eject the cassette tape or com-  
pact disc. If the another function was pre-  
viously playing, it will come on again.  
SWITCHING BETWEEN FUNCTIONS  
Push “AM”, “FM”, “FM1”, “FM2”, “TAPE” or  
“DISC” if the system is already on but you  
want to switch from one function to anoth-  
er.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
110  
’03 Rav4_U (L/O 0208)  
TONE AND BALANCE  
YOUR RADIO ANTENNA  
YOUR COMPACT DISC PLAYER  
For details about your system’s tone and  
balance controls, see the description of  
your own system.  
Your vehicle has a mast type antenna.  
When you insert a disc, gently push it in  
with the label side up. (The player will  
automatically eject a disc if the label side  
is down.) The player will play from track  
1 through the end of the disc. Then it will  
play from track 1 again.  
To remove the antenna, carefully turn it  
counterclockwise.  
Tone  
NOTICE  
How good an audio program sounds to  
you is largely determined by the mix of  
the treble, midrange and bass levels. In  
fact, different kinds of music and vocal  
programs usually sound better with differ-  
ent mixes of treble, midrange and bass.  
To prevent damage to the antenna,  
make sure it is removed before driv-  
ing your Toyota through an automatic  
car wash.  
NOTICE  
Never try to disassemble or oil any  
part of the compact disc player. Do  
not insert anything other than com-  
pact discs into the slot.  
Balance  
YOUR CASSETTE PLAYER  
A good balance of the left and right stereo  
channels and of the front and rear sound  
levels is also important.  
When you insert a cassette, the exposed  
tape should face to the right.  
The player is intended for use with 12 cm  
(4.7 in.) discs only.  
NOTICE  
Keep in mind that if you are listening to  
a stereo recording or broadcast, changing  
the right/left balance will increase the vol-  
ume of one group of sounds while de-  
creasing the volume of another.  
Do not oil any part of the player and  
do not insert anything other than cas-  
sette tapes into the slot, or the tape  
player may be damaged.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
111  
’03 Rav4_U (L/O 0208)  
—Controls and features  
"Type 1  
Details of specific buttons, controls and  
features are described in the alphabetical  
list that follows.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
112  
’03 Rav4_U (L/O 0208)  
1 2 3 4 5 6 (Preset buttons)  
DISC (Compact disc)  
(Reverse/Fast−forward button)  
These buttons are used to preset and  
tune in radio stations.  
Push the “DISC” button to play a compact  
disc.  
Push and hold “  
” (preset button 6) or  
” (preset button 5) to fast forward or  
To preset a station to a button: Tune in  
the desired station. (See “TUNE” or  
“SEEK”.) Push and hold down the button  
until you hear a beep—this will set the  
station to the button. The button number  
will appear on the display.  
When the audio system is set into com-  
pact disc operation, the display shows the  
track, or track and disc number currently  
being played.  
reverse within a compact disc. When you  
release the button, the compact disc play-  
er will resume playing.  
AM  
Error messages  
Push the “AM” button to turn on the radio  
and select the AM band. “AM” will appear  
on the display.  
If the player malfunctions, your audio sys-  
tem will display one of the following error  
messages.  
To recall a preset station: Push the button  
for the station you want. The button num-  
ber and station frequency will appear on  
the display.  
AUDIO CONTROL (Tone and sound bal-  
ance adjustment function)  
“WAIT”: The compact disc player unit  
may be too hot. Allow the player to cool  
down.  
These systems can store one AM and two  
FM stations for each button. (The display  
will show “AM”, “FM1” or “FM2” when you  
push “AM”, “FM1” or “FM2” button.)  
Each  
time  
you push  
the “AUDIO  
CONTROL” knob, the mode changes. To  
adjust the tone and balance, turn the  
knob.  
“ERROR 1”: The disc may be dirty, dam-  
aged or inserted incorrectly (up−side  
down). Clean the disc and re−insert it.  
BAS: Adjusts low−pitched tones. The dis-  
play ranges from −5 to 5.  
(Eject button)  
“NO DISC”: The compact disc changer of  
separate unit is empty. Insert a disc.  
Push the compact disc eject button to  
eject a compact disc.  
TRE: Adjusts high−pitched tones. The dis-  
play ranges from −5 to 5.  
“ERROR 3”: There is a problem inside  
the system. Eject the disc or magazine.  
Set the disc or magazine again.  
FAD: Adjusts the sound balance between  
the front and rear speakers. The display  
ranges from F7 to R7.  
“ERROR 4”: Over−current. Ask your  
Toyota dealer to inspect.  
BAL: Adjusts the sound balance between  
the right and left speakers. The display  
ranges from L7 to R7.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
113  
’03 Rav4_U (L/O 0208)  
“CD OPEN”: The compact disc changer  
lid of separate unit is open. Close the  
compact disc changer lid.  
RAND (Random)  
RPT (Repeat)  
There are two random features—you can  
either listen to the tracks on one compact  
disc in random order, or listen to the  
tracks on all the compact discs in the  
magazine in random order.  
There are two repeat features—You can  
either replay a disc track or a whole com-  
pact disc.  
If the malfunction still exists, take your  
vehicle to your Toyota dealer.  
Repeating a track:  
Quickly push and release “RPT” (preset  
button 2) while the track is playing.  
Ɲ DISC Ɯ  
To play the tracks on one disc in random  
order:  
Quickly push and release “RAND” (preset  
With compact disc changer only—  
” will appear on the display. When  
Use these buttons to select a disc you  
want to listen to.  
the track ends, it will automatically replay.  
To turn off the repeat feature, push this  
button again.  
button 1). “  
” will appear on the  
Push “Ɲ” (preset button 3) or “Ɯ” (preset  
button 4) until the number of the disc you  
want to listen appears on the display.  
display and the player will perform the  
tracks on the disc you are listening to in  
random order. To turn off the random fea-  
ture, push this button again.  
With compact disc changer only—  
Repeating a disc:  
Push and hold “RPT” (preset button 2)  
FM1 FM2  
With compact disc changer only—  
Push the “FM1” or “FM2” button to turn on  
the radio and select the FM band. “FM1”  
or “FM2” will appear on the display. This  
system allows you to set twelve FM sta-  
tions, two for each of the preset button.  
until you hear a beep. “  
” will ap-  
To play all the tracks in the magazine in  
random order:  
Push and hold “RAND” (preset button 1)  
pear on the display. The player will repeat  
all the tracks on the disc you are listening  
to. When the disc ends, the player will  
automatically go back to the top track of  
the disc and replay. To turn off the repeat  
feature, push this button again.  
until you hear a beep. “  
” will ap-  
PWR·VOL (Power and Volume)  
pear on the display and the player will  
perform all the tracks on all the discs in  
the magazine in random order. To turn off  
the random feature, push this button  
again.  
Push “PWR·VOL” to turn the audio system  
on and off. Turn “PWR·VOL” to adjust the  
volume.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
114  
’03 Rav4_U (L/O 0208)  
SCAN  
Radio  
Compact disc player  
SEEK/TRACK (Seeking/Track up/down)  
There are two scan features—you can ei-  
ther scan the tracks on a specific disc or  
scan the first tracks of all the discs in the  
magazine.  
Radio  
You can either scan all the frequencies on  
a band or scan only the preset stations  
for that band.  
In the seek mode, the radio finds and  
plays the next station up or down the  
station band.  
Scanning the tracks on a disc:  
To scan the preset stations:  
To seek the next station, quickly push and  
release “Ɯ” or “Ɲ” side of the “SEEK/  
TRACK” button. Do this again to find the  
station after that.  
Quickly push and release the “SCAN” but-  
ton. “SCAN” will appear on the display  
and the player will scan all the tracks on  
the disc you are listening to. To stop  
scanning, push this button again. If the  
player scanned all the tracks on the disc,  
it will stop scanning.  
Push and hold the “SCAN” button until  
you hear a beep. The radio will tune in  
the next preset station up the band, stay  
there for 5 seconds, and then move to the  
next preset station. To stop scanning,  
push this button again.  
Compact disc player  
Use this button to skip up or down to a  
different track.  
To scan all the frequencies:  
With compact disc changer only—  
Push “Ɯ” or “Ɲ” side of the “SEEK/  
TRACK” button until the number of the  
track you want to listen to appears on the  
display. If you want to return to the begin-  
ning of the current track, quickly push the  
down side of the button one time.  
Quickly push and release the “SCAN” but-  
ton. The radio will find the next station up  
the station band, stay there for 5 seconds,  
and then scan again to the next station.  
To stop scanning, push this button again.  
Scanning the first tracks of all the discs  
in the magazine:  
Push the “SCAN” button until you hear a  
beep. “ ·SCAN” will appear on the dis-  
play and the player will scan the first  
track of the next disc. To stop scanning,  
push this button again. If the player has  
scanned all the discs, it will stop scan-  
ning.  
ST (Stereo reception) display  
Your radio automatically changes to stereo  
reception when a stereo broadcast is re-  
ceived. “ST” appears on the display. If the  
signal becomes weak, the radio reduces  
the amount of channel separation to prev-  
ent the weak signal from creating noise.  
If the signal becomes extremely weak, the  
radio switches from stereo to mono recep-  
tion.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
115  
’03 Rav4_U (L/O 0208)  
TEXT  
This button is used to change the display  
for the compact disc that contains text  
data.  
To change the display, quickly push and  
release the “TEXT” button while the com-  
pact disc is playing. The display changes  
in the order from the elapsed time to disc  
title to track title, then back to the  
elapsed time.  
If this button is pushed while a compact  
disc that does not contain text data is  
playing, “NO TITLE” will appear on the  
display.  
If the entire disc or track title does not  
appear on the display, push and hold the  
button until you hear a beep. The rest of  
the title will appear.  
TUNE (Tuning)  
Turn the “TUNE” knob clockwise to step  
up the frequency. Turn the knob counter-  
clockwise to step down the frequency.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
116  
’03 Rav4_U (L/O 0208)  
"Type 2  
Details of specific buttons, controls and  
features are described in the alphabetical  
list that follows.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
117  
’03 Rav4_U (L/O 0208)  
1 2 3 4 5 6 (Preset buttons)  
Compact disc player  
Push and hold “ ” (preset button 6) or  
” (preset button 5) to fast forward or  
reverse within a compact disc. When you  
release the button, the compact disc play-  
er will resume playing.  
(Program)  
Push “ ” (preset button 4) to select  
the other side of a cassette tape. The  
display indicates which side is currently  
These buttons are used to preset and  
tune in radio stations.  
To preset a station to a button: Tune in  
the desired station. (See “TUNE” or  
“SEEK”.) Push and hold down the button  
until you hear a beep—this will set the  
station to the button. The button number  
will appear on the display.  
selected (“ ” indicates the top side, “  
indicates the bottom side).  
AM  
Auto−reverse feature: After the cassette  
player reaches the end of a tape side, it  
automatically reverses and begins to play  
the other side. This is true whether the  
cassette was playing or fast forwarding.  
Push the “AM” button to turn on the radio  
and select the AM band. “AM” will appear  
on the display.  
To recall a preset station: Push the button  
for the station you want. The button num-  
ber and station frequency will appear on  
the display.  
AUDIO CONTROL (Tone and sound bal-  
ance adjustment function)  
(Reverse/Fast−forward button)  
Cassette player  
Each  
time  
you push  
the “AUDIO  
These systems can store one AM and two  
FM stations for each button. (The display  
will show “AM”, “FM1” or “FM2” when you  
push “AM” or “FM” button.)  
CONTROL” knob, the mode changes. To  
adjust the tone and balance, turn the  
knob.  
Push “  
ward a cassette tape. “FF” will appear on  
the display. Push “ ” (preset button 5)  
” (preset button 6) to fast−for-  
BAS: Adjusts low−pitched tones. The dis-  
play ranges from −5 to 5.  
(Eject button)  
to rewind a tape. “REW” will appear on  
the display.  
Push the cassette tape eject button to  
eject a cassette. Push the compact disc  
eject button to eject a compact disc.  
TRE: Adjusts high−pitched tones. The dis-  
play ranges from −5 to 5.  
To stop the tape while it is fast−forward-  
ing, push “  
” or “TAPE” button. To stop  
FAD: Adjusts the sound balance between  
the front and rear speakers. The display  
ranges from F7 to R7.  
the tape while it is rewinding, push “  
or “TAPE” button.  
BAL: Adjusts the sound balance between  
the right and left speakers. The display  
ranges from L7 to R7.  
If a tape rewinds completely, the cassette  
player will stop and then play that same  
side. If a tape fast−forwards completely,  
the cassette will play the other side of the  
tape using the auto−reverse feature.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
118  
’03 Rav4_U (L/O 0208)  
DISC (Compact disc)  
If the malfunction still exists, take your  
FM  
vehicle to your Toyota dealer.  
Push the “DISC” button to play a compact  
disc.  
Push the “FM” button to turn on the radio  
and select the FM band. “FM1” or “FM2”  
will appear on the display. This system  
allows you to set twelve FM stations, two  
for each of the preset button.  
Ɲ DISC Ɯ  
When the audio system is set into com-  
pact disc operation, the display shows the  
track, or track and disc number currently  
being played.  
With compact disc changer only—  
Use these buttons to select the disc you  
want to listen to.  
PWR·VOL (Power and Volume)  
Push “Ɲ” (preset button 3) or “Ɯ” (preset  
button 4) until the number of the disc you  
want to listen appears on the display.  
Error messages  
Push “PWR·VOL” to turn the audio system  
on and off. Turn “PWR·VOL” to adjust the  
volume.  
If the player malfunctions, your audio sys-  
tem will display one of the six following  
error messages.  
Dolbyr  
B NR  
RAND (Random)  
If you are listening to a tape that was  
recorded with Dolbyr B Noise Reduction,  
“WAIT”: The compact disc player unit  
may be too hot. Allow the player to cool  
down.  
There are two random features—you can  
either listen to the tracks on one compact  
disc in random order, or listen to the  
tracks on all the compact discs in the  
magazine in random order.  
push “ ” (preset button 3). “  
appear on the display. Push the button  
again to turn off Dolbyr B NR.  
” will  
“ERROR 1”: The disc may be dirty, dam-  
aged or inserted incorrectly (up−side  
down). Clean the disc and re−insert it.  
The Dolby NR mode reduces tape noise  
by about 10 dB. For best sound reproduc-  
tion, play your tapes with this button on  
or off according to the mode used to re-  
cord the tape.  
To play the tracks on one disc in random  
order:  
Quickly push and release “RAND” (preset  
“NO DISC”: The compact disc changer of  
separate unit is empty. Insert a disc.  
button 1). “  
” will appear on the  
“ERROR 3”: There is a problem inside  
the system. Eject the disc or magazine.  
Set the disc or magazine again.  
display and the player will perform the  
tracks on the disc you are listening to in  
random order. To turn off the random fea-  
ture, push this button again.  
: Dolby noise reduction manufactured under license from  
Dolby Laboratories Licensing Corporation. “DOLBY” and the  
double D symbol  
are trademarks of Dolby Laboratories  
Licensing Corporation.  
“ERROR 4”: Over−current. Ask your  
Toyota dealer to inspect.  
“CD OPEN”: The compact disc changer  
lid of separate unit is open. Close the  
compact disc changer lid.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
119  
’03 Rav4_U (L/O 0208)  
With compact disc changer only—  
Compact disc player  
SCAN  
To play all the tracks in the magazine in  
random order:  
Push and hold “RAND” (preset button 1)  
There are two repeat features—You can  
either replay a disc track or a whole com-  
pact disc.  
Radio  
You can either scan all the frequencies on  
a band or scan only the preset stations  
for that band.  
until you hear a beep. “  
” will ap-  
Repeating a track:  
pear on the display and the player will  
perform all the tracks on all the discs in  
the magazine in random order. To turn off  
the random feature, push this button  
again.  
Quickly push and release “RPT” (preset  
button 2) while the track is playing.  
To scan the preset stations:  
Push and hold the “SCAN” button until  
you hear a beep. The radio will tune in  
the next preset station up the band, stay  
there for 5 seconds, and then move to the  
next preset station. To stop scanning,  
push this button again.  
” will appear on the display. When  
the track ends, it will automatically replay.  
To turn off the repeat feature, push this  
button again.  
RPT (Repeat)  
Cassette player  
With compact disc changer only—  
To scan all the frequencies:  
Push “RPT” (preset button 2) while the  
Repeating a disc:  
Quickly push and release the “SCAN” but-  
ton. The radio will find the next station up  
the station band, stay there for 5 seconds,  
and then scan again to the next station.  
To stop scanning, push this button again.  
Push and hold “RPT” (preset button 2)  
track is playing. “  
” will appear on  
the display. When the track ends, it will  
automatically rewind and replay. To turn  
off the repeat feature, push this button  
again.  
until you hear a beep. “  
” will ap-  
pear on the display. The player will repeat  
all the tracks on the disc you are listening  
to. When the disc ends, the player will  
automatically go back to the top track of  
the disc and replay. To turn off the repeat  
feature, push this button again.  
There must be at least 3 seconds of blank  
space between tracks in order for the re-  
peat feature to work correctly.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
120  
’03 Rav4_U (L/O 0208)  
Compact disc player  
SEEK/TRACK (Seeking/Track up/down)  
Compact disc player  
There are two scan features—you can ei-  
ther scan the tracks on a specific disc or  
scan the first tracks of all the discs in the  
magazine.  
Radio  
Use this button to skip up or down to a  
different track.  
In the seek mode, the radio finds and  
plays the next station up or down the  
station band.  
Push “Ɯ” or “Ɲ” side of the “SEEK/  
TRACK” button until the number of the  
track you want to listen to appears on the  
display. If you want to return to the begin-  
ning of the current track, quickly push the  
down side of the button one time.  
Scanning the tracks on a disc:  
To seek the next station, quickly push and  
release “Ɯ” or “Ɲ” side of the “SEEK/  
TRACK” button. Do this again to find the  
station after that.  
Quickly push and release the “SCAN” but-  
ton. “SCAN” will appear on the display  
and the player will scan all the tracks on  
the disc you are listening to. To stop  
scanning, push this button again. If the  
player scanned all the tracks on the disc,  
it will stop scanning.  
ST (Stereo reception) display  
Cassette Player  
Your radio automatically changes to stereo  
reception when a stereo broadcast is re-  
ceived. “ST” appears on the display. If the  
signal becomes weak, the radio reduces  
the amount of channel separation to prev-  
ent the weak signal from creating noise.  
If the signal becomes extremely weak, the  
radio switches from stereo to mono recep-  
tion.  
Use this button to skip up or down to  
locate a song or recording.  
With compact disc changer only—  
You can select up to nine recordings (in-  
cluding current one).  
Scanning the first tracks of all the discs  
in the magazine:  
Push the “SCAN” button until you hear a  
beep. “ ·SCAN” will appear on the dis-  
play and the player will scan the first  
track of the next disc. To stop scanning,  
push this button again. If the player has  
scanned all the discs, it will stop scan-  
ning.  
A blank space of at least 3 seconds is  
considered to be a start of a recording.  
When a beginning of a tape is reached,  
the player automatically resumes play.  
TAPE  
When the end of the tape is reached, the  
player automatically reverses sides and  
resumes normal play.  
Push the “TAPE” button to play a cassette  
tape.  
In addition, the feature may not work well  
with some spoken word, live, or classical  
recordings.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
121  
’03 Rav4_U (L/O 0208)  
Car audio system operating  
hints  
TEXT  
Here are some common reception prob-  
lems that probably do not indicate a prob-  
lem with your radio:  
NOTICE  
This button is used to change the display  
for the compact disc that contains text  
data.  
To ensure correct audio system op-  
erations:  
FM  
z Be careful not to spill beverages  
over the audio system.  
To change the display, quickly push and  
release the “TEXT” button while the com-  
pact disc is playing. The display changes  
in the order from the elapsed time to disc  
title to track title, then back to the  
elapsed time.  
Fading and drifting stations—Generally, the  
effective range of FM is about 40 km (25  
miles). Once outside this range, you may  
notice fading and drifting, which increase  
with the distance from the radio transmit-  
ter. They are often accompanied by distor-  
tion.  
z Do not put anything other than a  
cassette tape or Compact Disc into  
the slot.  
z The use of a cellular phone inside  
or near the vehicle may cause a  
noise from the speakers of the au-  
dio system which you are listening  
to. However, this does not indicate  
a malfunction.  
If this button is pushed while a compact  
disc that does not contain text data is  
playing, “NO TITLE” will appear on the  
display.  
Multi−path—FM signals are reflective,  
making it possible for two signals to reach  
your antenna at the same time. If this  
happens, the signals will cancel each oth-  
If the entire disc or track title does not  
appear on the display, push and hold the  
button until you hear a beep. The rest of  
the title will appear.  
er out, causing  
loss of reception.  
a
momentary flutter or  
RADIO RECEPTION  
Static and fluttering—These occur when  
signals are blocked by buildings, trees, or  
other large objects. Increasing the bass  
level may reduce static and fluttering.  
Usually,  
a
problem with radio reception  
TUNE (Tuning)  
does not mean there is a problem with  
your radio—it is just the normal result of  
conditions outside the vehicle.  
Turn the “TUNE” knob clockwise to step  
up the frequency. Turn the knob counter-  
clockwise to step down the frequency.  
Station swapping—If the FM signal you  
are listening to is interrupted or weak-  
ened, and there is another strong station  
nearby on the FM band, your radio may  
tune in the second station until the origi-  
nal signal can be picked up again.  
For example, nearby buildings and terrain  
can interfere with FM reception. Power  
lines or telephone wires can interfere with  
AM signals. And of course, radio signals  
have a limited range. The farther you are  
from a station, the weaker its signal will  
be. In addition, reception conditions  
change constantly as your vehicle moves.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
122  
’03 Rav4_U (L/O 0208)  
AM  
Use high−quality cassettes.  
CARING FOR YOUR COMPACT DISC  
PLAYER AND DISCS  
Fading—AM broadcasts are reflected by  
the upper atmosphere–especially at night.  
These reflected signals can interfere with  
those received directly from the radio sta-  
tion, causing the radio station to sound  
alternately strong and weak.  
D Low−quality cassette tapes can cause  
many problems, including poor sound,  
D Your compact disc player is intended  
inconsistent  
playing  
speed,  
and  
for use with 12 cm (4.7 in.) discs only.  
constant auto−reversing. They can also  
get stuck or tangled in the cassette  
player.  
D Extremely high temperatures can keep  
your compact disc player from working.  
On hot days, use the air conditioning  
to cool the vehicle interior before you  
listen to a disc.  
Station interference—When a reflected sig-  
nal and a signal received directly from a  
radio station are very nearly the same  
frequency, they can interfere with each  
other, making it difficult to hear the broad-  
cast.  
D Do not use a cassette if it has been  
damaged or tangled or if its label is  
peeling off.  
D Bumpy roads or other vibrations may  
D Do not leave a cassette in the player  
if you are not listening to it, especially  
if it is hot outside.  
make your compact disc player skip.  
D If moisture gets into your compact disc  
player, you may not hear any sound  
even though your compact disc player  
appears to be working. Remove the  
disc from the player and wait until it  
dries.  
Static—AM is easily affected by external  
sources of electrical noise, such as high  
tension power lines, lightening, or electri-  
cal motors. This results in static.  
D Store cassettes in their cases and out  
of direct sunlight.  
D Avoid using cassettes with a total play-  
ing time longer than 100 minutes (50  
minutes per side). The tape used in  
these cassettes is thin and could get  
stuck or tangled in the cassette player.  
CARING FOR YOUR CASSETTE PLAYER  
AND TAPES  
CAUTION  
For the best performance for your cas-  
sette player and tapes:  
Compact disc players use an invisible  
laser beam which could cause hazard-  
ous radiation exposure if directed  
outside the unit. Be sure to operate  
the player correctly.  
Clean the tape head and other parts regu-  
larly.  
D A dirty tape head or tape path can  
decrease sound quality and tangle your  
cassette tapes. The easiest way to  
clean them is by using a cleaning tape.  
(A wet type is recommended.)  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
123  
’03 Rav4_U (L/O 0208)  
Special shaped discs  
Labeled discs  
D Use only compact discs marked as  
shown above. The following products  
may not be playable on your compact  
disc player.  
NOTICE  
To prevent damage to the player or  
changer, do not use special shaped,  
low quality or labeled discs such as  
those shown in the illustrations.  
Copy−protected CD  
CD−R (CD−Recordable)  
CD−RW (CD−Re−writable)  
CD−ROM  
Low quality discs  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
124  
’03 Rav4_U (L/O 0208)  
Correct  
Wrong  
D Handle compact discs carefully, espe-  
cially when you are inserting them.  
Hold them on the edge and do not  
bend them. Avoid getting fingerprints  
on them, particularly on the shiny side.  
To clean a compact disc: Wipe it with a  
soft, lint−free cloth that has been damp-  
ened with water. Wipe in a straight line  
from the center to the edge of the disc  
(not in circles). Dry it with another soft,  
lint−free cloth. Do not use a conventional  
record cleaner or anti−static device.  
D Dirt, scrapes, warping, pin holes, or  
other disc damage could cause the  
player to skip or to repeat a section of  
a track. (To see a pin hole, hold the  
disc up to the light.)  
D Remove discs from the compact disc  
player when you are not listening to  
them. Store them in their plastic cases  
away from moisture, heat, and direct  
sunlight.  
2003 RAV4 from Aug. ’02 Prod. (OM42517U)  
125  

Related Topics

Popular Owner Manuals