Get Audio and hands-free phone systems Guide for Toyota Rav4 SUV Third Generation (2006-2012)

’07 Rav4_U (L/O 0701)

SECTION 1− 8

OPERATION OF INSTRUMENTS AND

CONTROLS

Audio and hands−free phone systems

Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170

Using your audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

AUX adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188

Audio remote controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

Rear seat entertainment system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

Audio/video system operating hints . . . . . . . . . . . . . . . . . . . . . . . . . . . 229

Hands−free phone system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236

169

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Reference

Type 1: AM·FM radio/compact disc player

(with compact disc changer controller)

Type 2−1: AM·FM radio/compact disc play-

er with changer

Type 2−2: AM·FM radio/compact disc play-

er with changer

170

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Using your audio system—

—Some basics

This section describes some of the basic

features on Toyota audio systems. Some

information may not pertain to your sys-

tem.

TONE AND BALANCE

Balance

For details about your system’s tone and

balance controls, see the description of

your own system.

A good balance of the left and right stereo

channels and of the front and rear sound

levels is also important.

Your audio system works when the ignition

key is in the “ACC” or “ON” position.

Keep in mind that if you are listening to

a stereo recording or broadcast, changing

the right/left balance will increase the vol-

ume of one group of sounds while de-

creasing the volume of other.

SRS

r

Type 1 and 2−1 audio systems utilize SRS

FOCUSr and SRS TruBassr audio

enhancement technologies, under license

from SRS Labs, Inc., in all mode except

AM radio mode.

TURNING THE SYSTEM ON AND OFF

Push “PWR·VOL” to turn the audio system

on and off.

YOUR RADIO ANTENNA

Push “AM”, “FM1”, “FM2” or “DISC·AUX”

to turn on that function without pushing

“PWR·VOL”. To turn on the compact disc

player, a compact disc must be loaded in

the player.

Your vehicle has a mast type antenna.

FOCUS, TruBass, SRS and

trademarks of SRS Labs, Inc.

FOCUS and TruBass technologies are

incorporated under license from SRS

Labs, Inc.

symbol are

To remove the antenna, carefully turn it

counterclockwise.

NOTICE

You can turn on compact disc player by

inserting a compact disc.

Tone

To prevent damage to the antenna,

make sure it is removed before driv-

ing your Toyota through an automatic

car wash.

You can turn off the compact disc player

by ejecting the compact disc. If the audio

system was previously off, then the entire

audio system will be turned off when you

eject the compact disc. If other function

was previously playing, it will come on

again.

How good an audio program sounds to

you is largely determined by the mix of

the treble, midrange (type 2−2) and bass

levels. In fact, different kinds of music

and vocal programs usually sound better

with different mixes of treble, midrange

and bass.

SWITCHING BETWEEN FUNCTIONS

Push “AM”, “FM1”, “FM2” or “DISC·AUX” if

the system is already on but you want to

switch from one function to other.

171

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

YOUR COMPACT DISC PLAYER (type 1)

When you insert a disc, gently push it in

with the label side up. The player will play

from track 1 through to the end of the

disc. Then it will play from track 1 again.

NOTICE

Never try to disassemble or oil any

part of the compact disc player. Do

not insert anything other than com-

pact discs into the slot.

The player is intended for use with 12 cm

(4.7 in.) discs only.

NOTICE

YOUR COMPACT DISC PLAYER WITH

CHANGER (type 2)

z Do not stack up two discs for in-

sertion, or it will cause damage to

the compact disc changer. Insert

only one compact disc into slot at

a time.

When you insert a disc, push the “LOAD”

button and gently push the disc in with

the label side up. This compact disc play-

er can store up to six discs. The player

will play from track 1 through to the end

of the disc. Then it will play from track

1 of the next disc.

z Never try to disassemble or oil any

part of the compact disc player. Do

not insert anything except a com-

pact disc into the slot.

The player is intended for use with 12 cm

(4.7 in.) discs only.

172

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Controls and features

"Type 1

Details of specific buttons, controls and

features are described in the alphabetical

list that follows.

173

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

1 2 3 4 5 6 (Preset buttons)

AM

ASL: The Automatic Sound Levelizer can

be turned on by turning the knob. In addi-

tion, turning the knob allows you to select

from LOW, MID, and HIGH volume and

tone settings. The ASL system automati-

cally adjusts volume and tone in accor-

dance with the driving speed. This helps

ensure an optimal listening experience

even if noise levels rise while driving.

These buttons are used to preset and

tune in radio stations.

Push the “AM” button to turn on the radio

and select the AM band. “AM” will appear

on the display.

To preset a station to a button: Tune in

the desired station. (See “TUNE·FILE” or

“SEEK/TRACK”.) Push and hold down the

button until you hear a beep—this will set

the station to the button. The button num-

ber will appear on the display.

AUDIO CONTROL (Tone and sound bal-

ance adjustment function)

Each

time

you push

the “AUDIO

CONTROL” knob, the mode changes. To

adjust the tone and balance, turn the

knob.

DISC·AUX (Compact disc)

To recall a preset station: Push the button

for the station you want. The button num-

ber and station frequency will appear on

the display.

Push the “DISC·AUX” button to play

compact disc.

a

BAS: Adjusts low−pitched tones. The dis-

play ranges from −5 to 5.

When the audio system is set into com-

pact disc operation, the display shows the

track, or track and disc number currently

being played.

TRE: Adjusts high−pitched tones. The dis-

play ranges from −5 to 5.

These systems can store one AM and two

FM stations for each button. (The display

will show “AM”, “FM1” or “FM2” when you

push “AM” or “FM1” or “FM2” button.)

FAD: Adjusts the sound balance between

the front and rear speakers. The display

ranges from F7 to R7.

To switch between CD and AUX (external

device) modes, press the “DISC·AUX” but-

ton. The AUX mode is only available when

AUX adapter is connected to the system.

When the AUX adapter is in use, “AUX”

will appear on the display.

(Eject button)

BAL: Adjusts the sound balance between

the right and left speakers. The display

ranges from L7 to R7.

Push the compact disc eject button to

eject a compact disc.

(Reverse/Fast−forward button)

Push and hold “

” (preset button 6) or

“

” (preset button 5) to fast forward or

reverse within a compact disc. When you

release the button, the compact disc play-

er will resume playing.

174

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Error messages

Ɲ DISC Ɯ

PWR·VOL (Power and Volume)

If the player malfunctions, your audio sys-

tem will display following error messages.

With compact disc changer only—

Push “PWR·VOL” to turn the audio system

on and off. Turn “PWR·VOL” to adjust the

volume.

Use these buttons to select the disc you

want to listen to.

“WAIT”: The compact disc player unit

may be too hot. Allow the player to cool

down.

RAND (Random)

Push “Ɲ” (preset button 3) or “Ɯ” (preset

button 4) until the number of the disc you

want to listen appears on the display.

Compact disc player

“ERROR 1”: The disc may be dirty, dam-

aged or inserted incorrectly (up−side

down). Clean the disc and re−insert it.

There are two random features—you can

either listen to the tracks on one compact

disc in random order, or listen to the

tracks on all the compact discs in the

magazine in random order.

FM1 FM2

Push the “FM1” or “FM2” button to turn on

the radio and select the FM band. “FM1”

or “FM2” will appear on the display. This

system allows you to set twelve FM sta-

tions, two for each of the preset button.

“NO DISC”: The compact disc changer of

separate unit is empty. Insert a disc.

“ERROR 3”: There is a problem inside

the system. Eject the disc or magazine.

Set the disc or magazine again.

To play the tracks on one disc in random

order:

Quickly push and release “RAND” (preset

FOLDER (Folder up/down)

button 1). “

” will appear on the

“ERROR 4”: Over−current. Ask your

Toyota dealer to inspect.

To skip up or down to a different folder:

Push either side of the “FOLDER” several

times until the number of the folder you

want to listen to appears on the display.

display and the player will perform the

tracks on the disc you are listening to in

random order. To turn off the random fea-

ture, push this button again.

“CD OPEN”: The compact disc changer

lid of separate unit is open. Close the

compact disc changer lid.

To jump to the first file in the first folder:

Push and hold the “Ɲ” side of the button

until you hear a beep.

With compact disc changer only—

If “NO MUSIC” appears on the display,

it indicates that a disc with no MP3/WMA

data has been inserted. Remove the disc

from the player and insert an MP3/WMA

data disc.

To play all the tracks in the magazine in

random order:

Push and hold “RAND” (preset button 1)

When playing a disc featuring both audio

data (CD−DA) and MP3/WMA files, audio

data (CD−DA) is played.

until you hear a beep. “

” will ap-

pear on the display and the player will

perform all the tracks on all the discs in

the magazine in random order. To turn off

the random feature, push this button

again.

If the malfunction still exists, take your

vehicle to your Toyota dealer.

175

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

MP3/WMA player

RPT (Repeat)

MP3/WMA player

There are two random playback features—

you can either listen to all of the files on

the compact discs in random order. You

can also listen to the files in a single

folder in random order.

Compact disc player

There are two repeat features—you can

repeat a signal file or an entire folder.

There are two repeat features—you can

either replay a disc track or a whole com-

pact disc.

Repeating a file:

Quickly push and release “RPT” (preset

button 2) while the file is playing.

Repeating a track:

Quickly push and release “RPT” (preset

button 2) while the track is playing.

To randomly play the files in

a

folder:

“

” will appear on the display. When

Quickly push and release “RAND” (preset

the file ends, it will repeat automatically.

This process will be continued until you

push the button again to turn off the re-

peat feature.

button 1). “

display.

” will appear on the

“

” will appear on the display. When

the track ends, it will automatically replay.

To turn off the repeat feature, push this

button again.

To randomly play all of the files on the

compact disc:

Push and hold “RAND” (preset button 1)

Repeating a folder:

Push and hold “RPT” (preset button 2)

With compact disc changer only—

until you hear

a

beep.

“

”

will

until you hear a beep. “

” will ap-

Repeating a disc:

Push and hold “RPT” (preset button 2)

until you hear a beep. “

pear on the display. The player will repeat

all the tracks on the disc you are listening

to. When the disc ends, the player will

automatically go back to the first track on

the disc and replay. To turn off the repeat

feature, push this button again.

appear on the display and the player will

play all of the files on the disc in random

order. To turn off the random playback

feature, push this button again.

pear on the display. The player will repeat

all of the files in the folder. When the last

file in the folder ends, the folder will re-

peat from the beginning. To turn off the

repeat feature, push this button again.

” will ap-

176

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

SCAN

Radio

Compact disc player

MP3/WMA player

There are two scan features—you can ei-

ther scan the tracks on a specific disc or

scan the first tracks of all the discs in the

magazine.

There are two scan features—you can ei-

ther scan the files in a folder on a specif-

ic disc or scan the first file of all the

folder.

You can either scan all the frequencies on

a band or scan only the preset stations

for that band.

Scanning the tracks on a disc:

Scanning the files on a folder:

To scan the preset stations:

Quickly push and release “SCAN”. “SCAN”

will appear on the display and the player

will scan up or down all the tracks on the

disc you are listening to. To stop scan-

ning, push this button again. If the player

scanned all the tracks on the disc, it will

stop scanning.

Quickly push and release “SCAN”. “SCAN”

will appear on the display and the player

will scan all the files in the folder you are

Push and hold “SCAN” until you hear a

beep. The radio will tune in the next pres-

et station up or down the band, stay there

for 5 seconds, and then move to the next

preset station. To stop scanning, push this

button again.

listening to. To select

a

file, push the

“SCAN” again. After all the tracks on the

disc have been scanned in one pass, nor-

mal play resumes.

To scan all the frequencies:

The discs in the compact disc changer

can be scanned up only.

Scanning the first file of all the folders:

Push “SCAN” until you hear

Quickly push and release “SCAN”. The

radio will find the next station up or down

the station band, stay there for 5 seconds,

and then scan again to the next station.

To stop scanning, push this button again.

a

beep.

“

SCAN” will appear on the display and

With compact disc changer only—

the player will scan the first file of the

next folder. To select a folder, push the

“SCAN” again. After all the folders have

been scanned in one pass, normal play

resumes.

Scanning the first tracks of all the discs

in the magazine:

Push “SCAN” until you hear

a

beep.

“

SCAN” will appear on the display and

the player will scan up or down the first

track of the next disc. To stop scanning,

push this button again. If the auto changer

has scanned all the discs, it will stop

scanning.

177

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

SEEK/TRACK (Seeking/Track up/down)

Radio

MP3/WMA player

TEXT

To file up or down to a different file:

Push either side of the “SEEK/TRACK”

several times until the file you want to

listen to appears on the display. If you

want to return to the beginning of the

current file, push the “Ɲ” side of the but-

ton one time, quickly.

Compact disc player

In the seek mode, the radio finds and

plays the next station up or down the

station band.

This button is used to change the display

for the compact disc that contains text

data.

To seek the next station, quickly push and

release “Ɯ” or “Ɲ” side of the

“SEEK/TRACK” button. Do this again to

find the station after that.

To change the display, quickly push and

release the “TEXT” button while the com-

pact disc is playing. The display changes

in the order from the elapsed time to disc

title to track title, then back to the

elapsed time.

To fast forward or reverse the disc:

If you want to fast forward or reverse the

disc, push and hold it until you hear a

beep. When you release the button, the

player will resume playing.

Compact disc player

Use this button to skip up or down to a

different track.

If this button is pushed while a compact

disc that does not contain text data is

playing, “NO TITLE” will appear on the

display.

ST (Stereo reception) display

Push “Ɯ” or “Ɲ” side of the “SEEK/

TRACK” button until the number of the

track you want to listen to appears on the

display. If you want to return to the begin-

ning of the current track, quickly push the

down side of the button one time.

Your radio automatically changes to stereo

reception when a stereo broadcast is re-

ceived. “ST” appears on the display. If the

signal becomes weak, the radio reduces

the amount of channel separation to prev-

ent the weak signal from creating noise.

If the signal becomes extremely weak, the

radio switches from stereo to mono recep-

tion.

If the entire disc or track title does not

appear on the display, push and hold the

button until you hear a beep. The rest of

the title will appear.

178

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

MP3/WMA player

This button is used to change the display

for the MP3/WMA file that contains text

data.

To change the display, quickly push and

release the “TEXT” button while the

MP3/WMA file is playing. The display

changes in the order from the elapsed

time to folder name to file name to album

title to track title to artist name, then back

to the elapsed time.

If this button is pushed while an

MP3/WMA file that does not contain text

data is playing, “NO TITLE” will appear on

the display.

If the entire text data is not displayed,

push and hold it until you hear a beep.

The rest of the text data will appear.

TUNE·FILE (Tuning and File up/down)

Radio

Turn the “TUNE·FILE” knob clockwise to

step up the frequency. Turn the knob

counterclockwise to step down the fre-

quency.

MP3/WMA player

Turn the knob clockwise to file up. Turn

the knob counterclockwise to file down.

179

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

"Type 2−1

Details of specific buttons, controls and

features are described in the alphabetical

list that follows.

180

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

"Type 2−2

Details of specific buttons, controls and

features are described in the alphabetical

list that follows.

181

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

1 2 3 4 5 6 (Preset buttons)

To eject all discs at a time, press and

hold the eject button until you hear

beep. The last compact disc played before

pushing the button will be ejected first. If

the ejected disc is not removed for a long

time, the eject function will be cancelled.

FAD: Adjusts the sound balance between

the front and rear speakers. The display

ranges from F7 to R7.

a

These buttons are used to preset and

tune in radio stations.

BAL: Adjusts the sound balance between

the right and left speakers. The display

ranges from L7 to R7.

To preset a station to a button: Tune in

the desired station. (See “TUNE·FILE” or

“SEEK/TRACK”.) Push and hold down the

button until you hear a beep—this will set

the station to the button. The preset but-

ton number will appear on the display.

(Reverse/Fast−forward button)

ASL: The Automatic Sound Levelizer can

be turned on by turning the knob. In addi-

tion, turning the knob allows you to select

from LOW, MID, and HIGH volume and

tone settings. The ASL system automati-

cally adjusts volume and tone in accor-

dance with the driving speed. This helps

ensure an optimal listening experience

even if noise levels rise while driving.

Push and hold “

” (preset button 6) or

“

” (preset button 5) to fast forward or

To recall a preset station: Push the button

for the station you want. The preset but-

ton number and station frequency will ap-

pear on the display.

reverse within a compact disc. When you

release the button, the compact disc play-

er will resume playing.

AM

This radio can store one AM and two FM

stations for each button. (The display will

show “AM”, “FM1” or “FM2” when you

push “AM”, “FM1” or “FM2” button.)

Push the “AM” button to turn on the radio

and select the AM band. “AM” will appear

on the display.

Type 2−2—

BAS: Adjusts low−pitched tones. The dis-

play ranges from −5 to 5.

AUDIO CONTROL (Tone and sound bal-

ance adjustment function)

(Eject button)

MID: Adjusts mid−pitched tones. The dis-

play ranges from −5 to 5.

This button is used to eject one or all

compact discs.

Each

time

you push

the “AUDIO

CONTROL” knob, the mode changes. To

adjust the tone and balance, turn the

knob.

TRE: Adjusts high−pitched tones. The dis-

play ranges from −5 to 5.

To eject the current compact disc, push

and release the compact disc eject button.

FAD: Adjusts the sound balance between

the front and rear speakers. The display

ranges from F7 to R7.

To eject a specific disc, push “Ɲ” (preset

button 3) or “Ɯ” (preset button 4) until the

number of the disc you want to eject is

displayed. Push and release the eject but-

ton.

Type 2−1—

BAS: Adjusts low−pitched tones. The dis-

play ranges from −5 to 5.

BAL: Adjusts the sound balance between

the right and left speakers. The display

ranges from L7 to R7.

TRE: Adjusts high−pitched tones. The dis-

play ranges from −5 to 5.

182

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

ASL: The Automatic Sound Levelizer can

be turned on by turning the knob. The

ASL system automatically adjusts volume

and tone in accordance with ambient noise

levels. This helps ensure an optimal lis-

tening experience even when road, wind

or other ambient noise levels rise.

Vehicles with AUX adapter—

If “NO MUSIC” appears on the display,

it indicates that a disc with no MP3/WMA

data has been inserted. Remove the disc

from the player and insert an MP3/WMA

data disc.

To switch between CD, DVD, and AUX

(external device) modes, press the

“DISC·AUX” button. The AUX mode is only

available when AUX adapter is connected

to the system. When the AUX adapter is

in use, “AUX” will appear on the display.

If the malfunction still exists, take your

vehicle to your Toyota dealer.

RSE: Vehicles with a rear seat entertain-

ment system—See “Rear seat entertain-

ment system” on page 191 in this Section.

Error messages

Ɲ DISC Ɯ

If the player malfunctions, your audio sys-

tem will display following error messages.

Use these buttons to select a disc you

want to listen to.

DISC·AUX (Compact disc)

“WAIT”: The compact disc player unit

may be too hot. Allow the player to cool

down.

Push “Ɲ” (preset button 3) or “Ɯ” (preset

button 4) until the number of the disc you

want to listen to appears on the display.

Push the “DISC·AUX” button to play

compact disc.

a

When the audio system is set into com-

pact disc operation, the display shows the

track, or track and disc number currently

being played.

“ERROR 1”: The disc may be dirty, dam-

aged or inserted incorrectly (up−side

down). Clean the disc and re−insert it.

FM1 FM2

Push the “FM1” or “FM2” button to turn on

the radio and select the FM band. “FM1”

or “FM2” will appear on the display. This

system allows you to set twelve FM sta-

tions, two for each of the preset button.

“NO DISC”: The compact disc changer of

separate unit is empty. Insert a disc.

Vehicles with rear seat entertainment sys-

tem—

“ERROR 3”: There is a problem inside

the system. Eject the disc or magazine.

Set the disc or magazine again.

The “DISC·AUX” button may also be used

to operate the DVD player when a disc is

in

the

DVD

player.

Pressing

the

“ERROR 4”: Over−current. Ask your

Toyota dealer to inspect.

“DISC·AUX” button allows you to switch

between the CD player and the DVD play-

er. When the DVD player is in operation,

“RSE DVD” appears on the display.

“CD OPEN”: The compact disc changer

lid of separate unit is open. Close the

compact disc changer lid.

183

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

FOLDER (Folder up/down)

To load multiple compact discs, push and

RAND (Random)

hold the button (until you hear a beep

when the audio system is on). When the

indicators on both sides of the slot turn

green, insert the first compact disc. After

the disc is loaded, the shutter of the slot

will close. After a few seconds, the shut-

ter will automatically open again and the

indicators will turn green so the next disc

can be inserted. The same process can

be applied for loading the rest of the

discs. If the player is full of discs, “DISC

FULL” will appear on the display.

To skip up or down to a different folder:

Push either side of the “FOLDER” several

times until the number of the folder you

want to listen to appears on the display.

Compact disc player

There are two random features—you can

either listen to the tracks on one compact

disc in random order, or listen to the

tracks on all the compact discs in the

magazine in random order.

To jump to the first file in the first folder:

Push and hold the “Ɲ” side of the button

until you hear a beep.

To play the tracks on one disc in random

order:

Quickly push and release “RAND” (preset

When playing a disc featuring both audio

data (CD−DA) and MP3/WMA files, audio

data (CD−DA) is played.

button 1). “

” will appear on the

display and the player will perform the

tracks on the disc you are listening to in

random order. To turn off the random fea-

ture, push this button again.

LOAD

If no compact disc is inserted, the shutter

will close after 15 seconds.

This button is used to load the compact

discs in the compact disc player. This

player can store up to six discs.

PWR·VOL (Power and Volume)

To play all the tracks in the magazine in

random order:

Push and hold “RAND” (preset button 1)

Push “PWR·VOL” to turn the audio system

on and off. Turn “PWR·VOL” to adjust the

volume.

To load one compact disc only, quickly

push and release the button, then insert

a compact disc. After the disc is loaded,

the shutter of the slot will close.

until you hear a beep. “

” will ap-

pear on the display and the player will

perform all the tracks on all the discs in

the magazine in random order. To turn off

the random feature, push this button

again.

If no compact disc is inserted, the shutter

will close after 15 seconds.

184

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

MP3/WMA player

RPT (Repeat)

MP3/WMA player

There are two random playback features—

you can either listen to all of the files on

the compact discs in random order. You

can also listen to the files in a single

folder in random order.

Compact disc player

There are two repeat features—you can

repeat a signal file or an entire folder.

There are two repeat features—you can

either replay a disc track or a whole com-

pact disc.

Repeating a file:

Quickly push and release “RPT” (preset

button 2) while the file is playing.

Repeating a track:

Quickly push and release “RPT” (preset

button 2) while the track is playing.

To randomly play the files in

a

folder:

“

” will appear on the display. When

Quickly push and release “RAND” (preset

the file ends, it will repeat automatically.

This process will be continued until you

push the button again to turn off the re-

peat feature.

button 1). “

display.

” will appear on the

“

” will appear on the display. When

the track ends, it will automatically replay.

To turn off the repeat feature, push this

button again.

To randomly play all of the files on the

compact disc:

Push and hold “RAND” (preset button 1)

Repeating a folder:

Push and hold “RPT” (preset button 2)

Repeating a disc:

Push and hold “RPT” (preset button 2)

until you hear a beep. “

pear on the display. The player will repeat

all the tracks on the disc you are listening

to. When the disc ends, the player will

automatically go back to the first track on

the disc and replay. To turn off the repeat

feature, push this button again.

until you hear

a

beep.

“

”

will

until you hear a beep. “

” will ap-

appear on the display and the player will

play all of the files on the disc in random

order. To turn off the random playback

feature, push this button again.

pear on the display. The player will repeat

all of the files in the folder. When the last

file in the folder ends, the folder will re-

peat from the beginning. To turn off the

repeat feature, push this button again.

” will ap-

185

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

SCAN

Radio

Compact disc player

MP3/WMA player

There are two scan features—you can ei-

ther scan the tracks on a specific disc or

scan the first tracks of all the discs in the

magazine.

There are two scan features—you can ei-

ther scan the files in a folder on a specif-

ic disc or scan the first file of all the

folder.

You can either scan all the frequencies on

a band or scan only the preset stations

for that band.

Scanning the tracks on a disc:

Scanning the files on a folder:

To scan the preset stations:

Quickly push and release “SCAN”. “SCAN”

will appear on the display and the player

will scan up or down all the tracks on the

disc you are listening to. To stop scan-

ning, push this button again. If the player

scanned all the tracks on the disc, it will

stop scanning.

Quickly push and release “SCAN”. “SCAN”

will appear on the display and the player

will scan all the files in the folder you are

Push and hold “SCAN” until you hear a

beep. The radio will tune in the next pres-

et station up or down the band, stay there

for 5 seconds, and then move to the next

preset station. To stop scanning, push this

button again.

listening to. To select

a

file, push the

“SCAN” again. After all the tracks on the

disc have been scanned in one pass, nor-

mal play resumes.

To scan all the frequencies:

The discs in the compact disc changer of

separate unit can be scanned up only.

Scanning the first file of all the folders:

Push “SCAN” until you hear

Quickly push and release “SCAN”. The

radio will find the next station up or down

the station band, stay there for 5 seconds,

and then scan again to the next station.

To stop scanning, push this button again.

a

beep.

“

SCAN” will appear on the display and

Scanning the first tracks of all the discs

in the magazine:

Push “SCAN” until you hear

the player will scan the first file of the

next folder. To select a folder, push the

“SCAN” again. After all the folders have

been scanned in one pass, normal play

resumes.

a

beep.

“

SCAN” will appear on the display and

the player will scan up or down the first

track of the next disc. To stop scanning,

push this button again. If the auto changer

has scanned all the discs, it will stop

scanning.

The discs in the compact disc changer of

separate unit can be scanned up only.

186

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

SEEK/TRACK (Seeking/Track up/down)

Radio

MP3/WMA player

TEXT

To file up or down to a different file:

Push either side of the “SEEK/TRACK”

several times until the file you want to

listen to appears on the display. If you

want to return to the beginning of the

current file, push the “Ɲ” side of the but-

ton one time.

Compact disc player

In the seek mode, the radio finds and

plays the next station up or down the

station band.

This button is used to change the display

for the compact disc that contains text

data.

To seek the next station, quickly push and

release “Ɯ” or “Ɲ” side of the

“SEEK/TRACK” button. Do this again to

find the station after that.

To change the display, quickly push and

release the “TEXT” button while the com-

pact disc is playing. The display changes

in the order from the elapsed time to disc

title to track title, then back to the

elapsed time.

To fast forward or reverse the disc:

If you want to fast forward or reverse the

disc, push and hold it until you hear a

beep. When you release the button, the

player will resume playing.

Compact disc player

Use this button to skip up or down to a

different track.

If this button is pushed while a compact

disc that does not contain text data is

playing, “NO TITLE” will appear on the

display.

Vehicles with rear seat entertainment sys-

tem—

Push

“Ɯ”

or

“Ɲ”

side

of

the

“SEEK/TRACK” button until the number of

the track you want to listen to appears on

the display. If you want to return to the

beginning of the current track, quickly

push the down side of the button one

time.

While the rear DVD player is in operation,

the chapter or track can be changed by

pushing the “Ɯ” or “Ɲ” side of the

“SEEK·TRACK” button.

If the entire disc or track title does not

appear on the display, push and hold the

button until you hear a beep. The rest of

the title will appear.

ST (Stereo reception) display

Vehicles with rear seat entertainment sys-

tem—

Your radio automatically changes to stereo

reception when a stereo broadcast is re-

ceived. “ST” appears on the display. If the

signal becomes weak, the radio reduces

the amount of channel separation to prev-

ent the weak signal from creating noise.

If the signal becomes extremely weak, the

radio switches from stereo to mono recep-

tion.

While the rear DVD player is in operation,

the chapter or track can be changed by

pushing the “Ɯ” or “Ɲ” side of the

“SEEK·TRACK” button.

187

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

AUX adapter

MP3/WMA player

If you install an audio system other than

a genuine audio system, you will not be

able to use the AUX adapter.

This button is used to change the display

for the MP3/WMA file that contains text

data.

To change the display, quickly push and

release the “TEXT” button while the

MP3/WMA file is playing. The display

changes in the order from the elapsed

time to folder name to file name to disc

title to track title to artist name, then back

to the elapsed time.

If this button is pushed while an

MP3/WMA file that does not contain text

data is playing, “NO TITLE” will appear on

the display.

An AUX adapter is installed in the rear

console box.

If the entire text data is not displayed,

push and hold it until you hear a beep.

The rest of the text data will appear.

By inserting

a

mini plug into the AUX

adapter, you can listen to music from a

portable audio device through the vehicle’s

speaker system.

TUNE·FILE (Tuning and File up/down)

Radio

To use the AUX adapter, switch to the

AUX mode (external device mode) by

pressing the “DISC·AUX” button. When the

AUX adapter is in use, “AUX” will appear

on the display. To adjust the volume, turn

the “PWR·VOL” knob.

Turn the “TUNE·FILE” knob clockwise to

step up the frequency. Turn the knob

counterclockwise to step down the fre-

quency.

MP3/WMA player

When using a portable audio device con-

nected to the power outlet or cigarette

lighter, noise may occur during playback.

If this happens, use the power source of

the portable audio device.

Turn the knob clockwise to file up. Turn

the knob counterclockwise to file down.

188

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Audio remote controls

(steering switches)

“+ −” switch

“Ɯ Ɲ” switch

Push “+” side to increase the volume. The

volume continues to increase while the

switch is being pushed.

Radio

To select a preset station:

Quickly push and release the “Ɯ” or “Ɲ”

side of the switch. Do this again to select

the next preset station.

Push “−” side to decrease the volume.

The volume continues to decrease while

the switch is being pushed.

To seek a station:

“MODE” switch

Push and hold the “Ɯ” or “Ɲ” side of the

switch until you hear

a

beep. Do this

Push “MODE” switch to select an audio

mode. Each push changes the mode se-

quentially if the desired mode is ready to

use.

again to find the next station. If you push

the switch on either side during the seek

mode, seeking will be cancelled.

To step up or down the frequency, push

and hold the switch even after you hear

To turn the audio system on, push the

“MODE” switch.

Some parts of the audio system can be

adjusted using the switches on the steer-

ing wheel.

a

beep. When you release from the

To turn the audio system off, push and

hold the “MODE” switch until the system

turns off.

switch, the radio will begin seeking up or

down for a station. Do this again to find

the next station.

Details of the specific switches, controls,

and features are described below.

1. “+ −” switch

2. “MODE” switch

3. “Ɯ Ɲ” switch

189

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Compact disc player

MP3/WMA player

To select a desired track:

To select a desired file:

Quickly push and release the “Ɯ” or “Ɲ”

side of the switch until the track you want

to listen to is set. If you want to return

to the beginning of the current track, push

the “Ɲ” side of the switch once, quickly.

Quickly push and release the “Ɯ” or “Ɲ”

side of the switch until the file you want

to listen to is set. If you want to return

to the beginning of the current file, push

the “Ɲ” side of the switch once, quickly.

Vehicles with rear seat entertainment sys-

tem—

To select a desired folder:

Push and hold the “Ɯ” or “Ɲ” side of the

switch until you hear a beep. Repeat this

until the folder you want to listen to is

set.

While the rear DVD player is in operation,

the chapter or track can be changed by

pushing the “Ɯ” or “Ɲ” side of the switch.

Vehicles with rear seat entertainment sys-

tem—

With compact disc changer only—

To select a desired disc:

While the rear DVD player is in operation,

the file can be changed by pushing the

“Ɯ” or “Ɲ” side of the switch.

Push and hold the “Ɲ” or “Ɯ” side of the

switch until you hear a beep. Repeat this

until the disc you wish to listen to is set.

With compact disc changer only—

To select a desired disc:

Push and hold the “Ɯ” or “Ɲ” side of the

switch until you hear a beep. Repeat this

until the disc you want to listen to is set.

190

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Rear seat entertainment system—

The rear seat entertainment system con-

sists of the following components.

∗

1. Front audio system

2. DVD player

3. Rear seat entertainment system display

4. Rear seat entertainment system

controller

5. A/V input adapter

6. Power outlet (115 VAC)

∗

7. Audio remote control switches

8. Power outlet main switch

∗:

For details, see “—Controls and fea-

tures” on page 173 or “Audio remote con-

trols” on page 189 in this section.

191

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Display

The rear seat entertainment system is de-

signed for the rear passengers to enjoy

audio and DVD video separately from the

front audio system.

You can purchase a wireless headphone

at a Toyota dealer.

CAUTION

D Do not operate motor vehicle

The rear seat entertainment system can

be operated when the ignition key is in

the “ACC” or “ON” position.

a

while using headphones. Doing so

may cause an accident, resulting in

death or serious injury.

The rear passengers can enjoy DVD vid-

eo, audio CD, video CD, CD text, dts−CD

and MP3.

D With DVD player:

Conversational speech on some

DVDs is recorded at a low volume

to emphasize the impact of sound

effects. If you adjust the volume

assuming that the conversations

represent the maximum volume lev-

el that the DVD will play, you may

be startled by louder sound effects

or when you change to a different

audio source. Be sure to adjust the

volume with this in mind.

The rear seat entertainment system can

play DVD video, audio CD, video CD, CD

text, dts−CD or MP3 only when a disc is

loaded in the DVD player.

To open the display, push the lock release

button.

You can enjoy videos and sound when

your personal audio system is connected

to the A/V input adapter. For details, refer

to the manufacturer’s instructions.

You can enjoy the rear seat entertainment

system with a wireless headphone. The

wireless headphone can be used within

rear seat. If the signal becomes weak, the

headphone will mute. For details, refer to

the manufacturer’s instructions.

Make sure the volume is not in-

creased, before you turn on the

headphone.

With some wireless headphone generally

available in the market, it may be difficult

to catch sound properly. Toyota recom-

mends the use of Toyota genuine wireless

headphone.

192

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

NOTICE

z Benzene or alkaline solutions may

damage the coated surface of the

screen.

z To prevent the battery from being

discharged, do not turn on the rear

seat entertainment system longer

than necessary when the engine is

not running.

Pull the display down to an easily view-

able angle (between 90_ and 125_)

To close, push the display up until you

hear a click.

The illumination of the screen is automati-

cally turned off when the display is

closed. However, the rear seat entertain-

ment system is not turned off.

NOTICE

The screen should be cleaned with a

dry soft cloth. If the screen is pushed

by hand or wiped with a hard cloth,

the surface of the screen may be

scratched.

CAUTION

To reduce the chance of injury in

case of an accident or sudden stop

while driving, close the display when

it is not in use.

193

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Rear seat entertainment

system controller

The rear seat entertainment system can

be operated with the rear seat entertain-

ment system controller and buttons on the

DVD player unit. The system cannot be

operated by touching the switches on the

screen directly.

BEFORE USING THE CONTROLLER

(for new vehicle owners)

A battery is already set in the control-

ler with an insulating sheet, which pre-

vents the battery from being dis-

charged. Before using the controller,

remove the insulating sheet according

to the following procedure.

CAUTION

Do not disassemble or modify the

controller. It may cause an accident,

fire or electric shock.

NOTICE

1. Remove the cover of the controller

as shown.

Keep the controller away from direct

sunlight, high heat and high humidity.

These conditions could cause the

case to deform or the battery to ex-

plode or leak.

194

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

USING THE CONTROLLER

To use the rear seat entertainment sys-

tem controller, direct the signal output

portion of the controller to the signal

reception portion of the rear seat enter-

tainment system display.

The controller does not operate properly

when the signal reception portion of the

display is exposed to direct sunlight.

Block the display from direct sunlight.

CAUTION

To reduce the chance of injury in

case of an accident or a sudden stop

while driving, stow the controller in

the console box or front seat side

table when it is not in use.

2. Remove the insulating sheet.

195

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

NOTICE

Observe the followings, otherwise the

controller may be damaged.

z Do not drop or strongly knock the

controller against hard objects.

z Do not sit on or place heavy ob-

jects on the controller.

z Do not leave the controller exposed

to high temperatures (such as on

the instrument panel) for

time.

a

long

196

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Control buttons

"Controller

1. “DVD” button

This button turns on the DVD mode.

2. “VIDEO” button

This button causes the display to use

the video signal from an external video

device.

3. “OFF” button

This button turns off the rear seat en-

tertainment system.

4. Joystick

This joystick selects a control switch,

mode switch on the screen or the

menu for the disc.

5. “ENT” button

This button inputs the selected switch

or the selected menu for the disc.

6. “FOLDER

This button selects a desired folder.

7. “FOLDER ” button

This button selects a desired folder.

” button

8. “

” button

This button fast forwards

a

screen

when the DVD player is operated.

197

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

9. “ ” button

16. “ANGLE” button

REPLACING CONTROLLER BATTERY

For replacement, use 3 AA batteries.

This button selects the angle of the

screen when the DVD player is oper-

ated.

This button stops a screen when the

DVD player is operated.

CAUTION

10. “SET UP” button

17. “SEARCH” button

This button indicates the initial set up

screen when the DVD player is oper-

ated.

Special care should be taken to pre-

vent small children from swallowing

the removed battery or components.

This button indicates the title search

screen when the DVD player is oper-

ated.

11. “MENU” button

18. “TOP MENU” button

This button indicates the menu screen

for DVD video when the DVD player is

operated.

NOTICE

This button indicates the title selection

screen for DVD video when the DVD

player is operated.

z When replacing the battery, be care-

ful not to lose the components.

12. “AUDIO” button

19. “

” button

z Replace only with the same or

equivalent type recommended by a

Toyota dealer.

This button indicates the changing au-

dio screen when the DVD player is

operated.

This button reverse a screen when the

DVD player is operated.

z Dispose of used batteries according

to the local laws.

13. “SUB TITLE” button

20. “" ” button

This button indicates the changing sub-

title screen when the DVD player is

operated.

This button plays or pauses a screen

when the DVD player is operated.

21. “TRACK/CHAPTER

This button selects track/chapter.

22. “TRACK/CHAPTER ” button

” button

14. “DISPLAY” button

This button adjusts the color, tone,

contrast and brightness of the screen.

This button selects track/chapter.

23. “OPTION” button

15. “SIZE” button

This button changes the display mode

when the DVD player is operated.

This button indicates the control

switches on the screen when the DVD

player is operated.

198

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

NOTICE

z Be sure that the positive side and

negative side of the controller bat-

tery should be faced correctly.

z Do not replace the battery with wet

hands. Water may cause rust.

z Do not touch or move any compo-

nents inside of the controller, or it

may interfere with proper operation.

z Be careful not to bend the electrode

of the controller battery insertion.

z Close the battery case securely.

Replace the battery according to the fol-

lowing procedure:

2. Remove the discharged batteries and

put in the new batteries as shown.

Install the cover.

After replacing the battery, check that the

controller operates properly. If the control-

ler still does not operate properly, contact

your Toyota dealer.

1. Remove the cover of the controller as

shown.

199

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Turning the rear seat

entertainment system on and

off

—Operating the rear DVD

player using the front audio

system

While the rear DVD player is in operation,

the chapter or track can be changed by

pushing the “Ɯ” or “Ɲ” side of the

“SEEK/TRACK” button.

For details, see “—Controls and features”

on page 173 in this Section.

To turn on the system, push the “DVD”

button or “VIDEO” button.

To turn off the system, push the “OFF”

button.

When the “DVD” button is pushed, the

disc load screen changes to the DVD

player operation screen.

When the front audio system is turned off,

the rear audio system and the DVD player

will be turned off simultaneously.

When the “VIDEO” button is pushed, the

images and sounds from the personal au-

dio machine are output.

The “DVD” button is effective only when

a disc is inserted.

200

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Rear system lock

—DVD player

The audio system controls in the instru-

ment panel can be used to disable the

operation of the rear seat entertainment

system by rear seat passengers.

The DVD player can play audio CDs/

MP3 CDs, DVD video discs, CD texts,

dts−CDs and video CDs.

For appropriate discs for this player, see

“Audio/video system operating hints” on

page 229 in this Section.

Turning on the rear system lock prevents

small children from using the remote con-

troller or operation panel of the DVD play-

er unit to operate the rear seat entertain-

ment system during driving.

The DVD player works when the ignition

key is in the “ACC” or “ON” position.

To turn on the DVD player, a disc must

be loaded in the player.

Turn the audio system on. Push the

“AUDIO CONTROL” knob repeatedly until

“RSE” is displayed. Next, turn the “AUDIO

CONTROL” knob until “ON” is displayed,

and then push the “AUDIO CONTROL”

knob.

To turn off the player, eject the disc.

Error messages

If the player malfunctions, your audio sys-

tem will display following error messages.

When the rear system lock is on and any

button is pushed on the remote controller

or the operation panel, the screen shown

If “DISC CHECK” appears on the

screen: It indicates that the disc is dirty,

damaged or it was inserted upside down.

Clean the disc or insert it correctly.

above is displayed for approximately

seconds.

6

Even when the rear system lock is turned

on during play mode, the images and

sounds continue without interruption.

If “REGION CODE ERROR” appears on

the screen: It indicates that the DVD re-

gion code is not set properly.

The condition of the rear system lock is

maintained, even when the ignition switch

is turned off.

If “DVD ERROR” appears on the

screen: There is

a

problem inside the

player. Eject the disc. Set the disc again.

If the malfunction still exists, take your

vehicle to your Toyota dealer.

201

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

If a disc which is not playable is inserted,

8 cm (3 in.) compact disc singles

“DISC CHECK” will also appear on the

screen. For appropriate discs for this play-

er, see “Audio/video system operating

hints” on page 229 in this Section.

Your compact disc player needs an adap-

tor to play compact disc singles. Compact

disc singles are about 8 cm (3 in.) in

diameter−smaller than standard discs.

The player will play the track or chapter,

and it will play from the beginning of the

track or chapter again after it reaches the

end.

NOTICE

Never try to disassemble or oil any

part of the DVD player. Do not insert

anything other than a disc into the

slot.

INSERTING THE DISC

Insert a disc into the slot with the label

side up.

“DISC” indicator light turns on while the

disc is loaded.

If the label faces down, the disc cannot

be played. In this case, “DISC CHECK”

and disc number appear on the screen.

202

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—DVD player operation

switches

EJECTING THE DISC

Push the “ ” button.

The DVD player can be operated with the

controller buttons directly.

The player can also be operated with the

switches on the screen.

1. “DVD” button

To operate the switches on the screen,

select the switch by the joystick and push

the “ENT” button. You cannot select the

switches on the screen by touching them

directly.

2. “SET UP” button

3. “MENU” button

4. “AUDIO” button

5. “SUB TITLE” button

6. “ANGLE” button

When the switch is selected by the joys-

tick, the outline of the switch changes to

blue. Push the “ENT” button, and the

switch will be highlighted in green.

7. “SIZE” button

8. “SEARCH” button

9. “TOP MENU” button

10. “" ”, “ ”, “AA” and “""” buttons

203

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Top page (DVD video operation switch)

Top page (video CD)

TURNING THE OPERATION SWITCHES

ON AND OFF

To turn on the operation switches, push

the “OPTION” button on the controller.

Second page (DVD video operation

switch)

Second page (video CD)

204

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

There are operation switches on the “Page

1” and “Page 2” screens.

To change the screen, push the “Page 1”

or “Page 2” switch on the screen.

On the screen

If

“

”

appears on the screen when

you select a switch, it indicates that

the switch cannot work.

Controller

205

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—DVD player operation

To turn off the switches on the screen,

push the “OPTION” button on the control-

ler once again or push the “Hide Buttons”

on the screen.

NOTE: The playback condition of some

DVD video discs may be determined by

the DVD video software producer. This

DVD player plays discs as the software

producer intended. Therefore, some

functions may not work properly. Be

sure to read the instruction manual for

the DVD video disc separately provided.

For detailed information about DVD

video discs, see “—DVD video disc

information” on page 226 in this

Section.

CAUTION

Conversational speech on some DVDs

is recorded at a low volume to em-

phasize the impact of sound effects.

If you adjust the volume assuming

that the conversations represent the

maximum volume level available for

the DVD, you may be startled by

louder sound effects or when you

change to a different audio source.

Loud sounds may have a significant

impact on the human body or pose a

driving hazard. Keep this in mind

when you adjust the volume.

Precautions for DVD video discs

When recording on a DVD video, video

CD or audio tracks may not record in

some cases while the menu is displayed.

As audio will not play in this case, verify

that the video tracks are playing and then

activate playback.

The title/chapter number and playback

time display may not appear while playing

back certain DVD video discs.

206

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

TURNING THE MENU SCREEN FOR THE

DISC ON OR OFF

To turn on the menu screen for the disc,

push the “Top Menu” or the “Menu” switch

on the screen. You can also turn on the

menu screen by pushing the “MENU” or

“TOP MENU” button on the controller.

For the operation of the menu screen, see

the separate manual for the DVD disc.

You can select the menu for the disc by

the joystick and the “ENT” button on the

controller.

207

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

OPERATING THE “" ”,

“

”, “AA”

AND “""” SWITCHES/BUTTONS

“" ” switch/button: Push this switch/but-

ton to pause the disc or to cancel the

pause and return to normal playing.

“

”

switch/button: This switch/button

stops a screen when the DVD player is

operated.

“AA” and “""” switches/buttons: Push

and hold the “AA” or “""” switch/button

to fast forward or reverse. When you re-

lease the switch/button, the DVD player

will resume playing.

Push the “""” switch/button while paus-

ing, the DVD video plays the slow−motion

video replay.

208

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

SKIPPING TO THE PREDETERMINED

SCREEN

SELECTING THE TITLE

To display the searching title screen, push

the “Search” switch on the screen. You

can also display the screen by pushing

the “SEARCH” button on the controller.

To skip to the predetermined screen, push

the “Return” switch. The DVD player starts

playing from the beginning of the predeter-

mined screen.

For further details of the predetermined

screen, see the separate manual for the

DVD disc.

209

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

CHANGING THE SUBTITLE LANGUAGE

Push the “Sub Title” switch on the screen,

and then the changing subtitle language

screen will appear. You can also display

the screen by pushing the “SUB TITLE”

button on the controller.

Select the title number by using the

joystick and push the “ENT” button to

enter the number. The player starts play-

ing disc for that title number. The selected

title number will appear on the screen.

Push the “Back” switch to return to the

menu screen.

210

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

CHANGING AUDIO LANGUAGE

Push the “Audio” switch on the screen

and then the changing audio language

screen will appear. You can also display

the screen by pushing the “AUDIO” button

on the controller.

Each time you push the “Sub Title” switch,

another language stored on the disc is

selected.

To turn off the subtitles, push the “Hide

Buttons” switch.

Push the “Back” switch to return to the

previous screen.

The selected subtitle language will appear

on the screen.

211

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

CHANGING ANGLE SCREEN

Push the “Angle” switch on the screen,

and then the changing angle screen will

appear. You can also display the screen

by pushing the “ANGLE” button on the

controller.

Each time you push the “Audio” switch,

another language stored on the disc is

selected.

To turn off the audio language screen,

push the “Hide Buttons” switch.

Push the “Back” switch to return to the

previous screen.

The selected audio language will appear

on the screen.

212

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

CHANGING THE INITIAL SETTING

Push the “Set Up” switch on the screen,

and then the initial setting screen will ap-

pear. You can also display the screen by

pushing the “SET UP” button on the con-

troller. You can change the initial setting.

After the setting is done, the player plays

from the beginning of the chapter or the

track.

The angle can be selected for discs that

are multi−angle compatible when the “

”

mark appears on the screen. Each time

you push the “Angle” switch, the angle

changes. The angle number which you

can select will appear on the screen.

To turn off the screen, push the “Hide

Buttons” switch.

Push the “Back” switch to return to the

previous screen.

213

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Setup Menu screen

CHANGING THE AUDIO LANGUAGE

To select an audio language, use the joys-

tick to enter the appropriate 4−digit lan-

guage code. For details of the language

codes, see the language code list.

Push the “Audio Language” switch on the

“Setup Menu” and the “Select Audio

Lang.” screen appears.

There are initial setting switches on the

“Setup Menu” screen.

After you change the initial setting, push

the “Enter” switch. The initial setting

switch will be turned off and return to the

picture previously.

If a code which is not on the list is en-

tered and the “ENT” button is pushed, the

“Incorrect Code” screen will appear. Enter

the code of the language you want to hear

again.

Select the language you want to hear by

pushing the appropriate switch on the

screen.

To return to the “Setup Menu” screen,

push the “Back” switch.

When the “Default” switch is pushed, all

menus are initialized.

To return to the “Select Audio Lang.”

screen, push the “Back” switch.

If you cannot find the language you want

to hear, push the “Others” switch. The

“Enter Audio Lang. Code” screen will ap-

pear.

214

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

CHANGING THE SUBTITLE LANGUAGE

To enter the code of the language you

CHANGING THE DVD LANGUAGE

want to read, use the joystick to enter the

appropriate 4−digit language code. For de-

tails about the language codes, see the

language code list.

To display the “Select Subtitle Lang.”

screen, push the “Subtitle Language”

switch on the “Setup Menu” screen.

To display the “Select DVD Lang.” screen,

push the “DVD Language” switch on the

“Setup Menu” screen.

Select the language you want to read by

pushing the appropriate switch on the

screen.

Select the language you want to read on

the screen.

Push the “ENT” button on the controller.

If numbers which are not on the list are

entered and the “ENT” button is pushed,

the “Incorrect code” screen will appear.

Enter the language code you want to read

again.

To return to the “Setup Menu” screen,

push the “Back” switch.

To return to the “Setup Menu” screen,

push the “Back” switch.

If you cannot find a language you want to

read, push the “Others” switch. The “Enter

DVD Lang. Code” screen will appear.

If you cannot find the language you want

to read, push the “Others” switch. The

“Enter Subtitle Lang. Code” screen will

appear.

To return to the “Select Subtitle Lang.”

screen, push the “Back” switch on the

screen.

215

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

To enter the code of the language you

want to read, use the joystick to enter the

appropriate 4−digit language code. For de-

tails about the language codes, see the

language code list.

TURNING THE ANGLE MARK ON OR

OFF

SETTING

RESTRICTIONS

LEVEL

OF

VIEWER

The angle mark can be turned on for

discs that are multi−angle compatible.

You can restrict the play back screen by

setting the viewer restrictions. You can

prevent the restriction with a password.

Some discs do not supply a restriction.

Each time you push the “Angle Mark”

switch on the screen, the angle mark

turns on or off alternately.

Push the “ENT” button on the controller.

If numbers which are not on the list are

entered and the “ENT” button is pushed,

the “Incorrect code” screen will appear.

Enter the language code you want to read

again.

To set the level of viewer restriction, push

the “Parental Lock” switch on the “Setup

Menu” screen. The “Enter Personal Code”

screen will appear.

To return to the “Select DVD Lang.”

screen, push the “Back” switch on the

screen.

216

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

SETTING THE DISPLAY MODE

Pushing the “SIZE” button on the control-

ler causes the display modes to change

sequentially as follows:

Normal

Wide1

Wide2

Enter the password and push the “ENT”

button. The “Select Restriction Level”

screen will appear.

Push a parental level (1—8). The smaller

the level number, the stricter the age limit.

Push the “Back” switch to return to the

“Setup Menu” screen.

You cannot change the setting without in-

putting the password. When you forget or

change the password, push the “A” side

of the joystick ten times to initialize the

password.

To return to the “Setup Menu” screen,

push the “Back” switch.

217

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

LANGUAGE CODE LIST

0125

0126

0201

0205

0207

0208

0209

0214

0215

0218

0301

0315

0319

0325

0401

0426

0515

0520

0521

0601

0609

Aymara

0610

Fiji

Code

1001

0514

0618

0405

0920

0519

2608

1412

1620

1922

1821

1115

0512

0101

0102

0106

0113

0118

0119

Language

Japanese

English

French

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

0615

0625

0701

0704

0712

0714

0721

0801

0809

0818

0821

0825

0901

0905

0911

0914

0919

0923

1009

1023

Faroese

Frisian

Irish

Scots−Gaelic

Galician

Guarani

Gujarati

Hausa

German

Italian

Bislama

Bengali

Tibetan

Breton

Spanish

Chinese

Dutch

Hindi

Portuguese

Swedish

Russian

Korean

Catalan

Corsican

Czech

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Welsh

Greek

Danish

Afar

Bhutani

Esperanto

Estonian

Basque

Persian

Finnish

Abkhazian

Afrikaans

Amharic

Arabic

Indonesian

Icelandic

Hebrew

Yiddish

Assamese

Javanese

218

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

1101

1111

1112

1113

1114

1119

1121

1125

1201

1214

1215

1220

1222

1307

1309

1311

1312

1314

1315

1318

1319

Georgian

Kazakh

1320

1325

1401

1405

1415

1503

1513

1518

1601

1612

1619

1721

1813

1814

1815

1823

1901

1904

1907

1908

1909

Maltese

Burmese

Nauru

1911

1912

1913

1914

Slovak

Slovenian

Samoan

Shona

Greenlandic

Cambodian

Kannada

Kashmiri

Kurdish

Nepali

Norwegian

Occitan

1915

1917

1918

1919

1920

1921

1923

2001

2005

2007

2008

2009

2011

2012

2014

2015

2018

Somali

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swahili

Tamil

(Afan) Oromo

Oriya

Kirghiz

Latin

Punjabi

Lingala

Polish

Laothian

Lithuanian

Latvian

Pashto, Pushto

Quechua

Rhaeto−Romance

Kirundi

Telugu

Malagasy

Maori

Tajik

Romanian

Kinyarwanda

Sanskrit

Thai

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Tigrinya

Turkmen

Tagalog

Setswana

Tonga

Sindhi

Sangho

Serbo−Croatian

Sinhalese

Malay

Turkish

219

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

USING THE CONTROL SCREEN

2019

2020

2023

2111

2118

2126

2209

2215

2315

2408

2515

2621

Tsonga

Tatar

When playing a disc, push the “DVD” but-

ton on the controller. The status screen

will appear on the screen.

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapük

Wolof

Xhosa

Yoruba

Zulu

SELECTING THE CHAPTER/TRACK

To select the chapter/track, push the

“CHAPTER/TRACK

”

button

button on the

or

”

controller until the number of the

chapter/track you want to select appears

on the screen.

220

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—DVD player operation (video

CD/audio CD/CD text/MP3)

SELECTING THE DISC MENU NUMBER

(video CD only)

Enter the disc menu number by using the

OPERATING THE “" ”, “AA” AND

“""” SWITCHES (video CD only)

joystick and push the “ENT” button. The

player starts playing the disc from the

entered disc menu number. The entered

disc menu number will appear on the

screen.

Push the “Select Number” switch and then

the disc menu number search screen will

appear. You can also display the screen

by pushing the “SEARCH” button on the

controller.

“" ” switch: Push this switch to pause

the disc or to cancel the pause and return

to normal playing.

“AA” and “""” switches: Push this

switch to fast forward or reverse. If you

want to return to the beginning of the

current track, release the switch.

Push the “Back” switch to return to the

menu screen.

Video CD only—

Push the “""” switch/button while paus-

ing, the DVD video plays the slow−motion

video replay.

221

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

TURNING ON THE DISC MENU (video

CD only)

CHANGING MENU PAGE OR TRACK

(video CD only)

CHANGING

TRANSMISSION (video CD only)

A

MULTIPLEX

Push the “Return” switch to turn on the

menu screen for the disc.

Push the “Next Menu” or “Prev. Menu”

switch while the disc menu is displayed.

The next or previous page will appear on

the screen.

Push the “Main/Sub” switch to change a

multiplex transmission. The mode changes

from Main/Sub to Main to Sub and back

to Main/Sub by pushing the “Main/Sub”

switch.

For the operation of the menu screen, see

the manual for the video CD.

Push the “Next Menu” or “Prev. Menu”

switch while the player is playing video.

The next or previous track will be

searched and played.

222

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

CHANGING THE INITIAL SETTING (video

CD only)

USING THE CONTROL SCREEN

When playing a disc, push the “DVD” but-

ton on the controller. The control screen

will appear on the screen.

Push the “Set Up” switch on the screen

and then the initial setting screen will ap-

pear. You can also display the screen by

pushing the “SET UP” button on the con-

troller. You can change the initial setting.

(See “CHANGING THE INITIAL SETTING”

on page 213 in this Section for details.)

CD text only—

The disc title and track title will appear on

the screen when pushing the “DVD” but-

ton.

Details of the specific switches, controls

and features are described below.

After the setting is done, the player plays

from the beginning of the chapter or the

track.

1. “RPT” switch (audio CD and CD text)

Push the “RPT” switch while the track

is playing. When the track ends, it will

automatically replay. To turn off the re-

peat feature, push this switch again.

CD Text

2. “RAND” switch (audio CD and CD text)

Push the “RAND” switch. The player

will play the tracks on the disc in ran-

dom order. To turn off the random fea-

ture, push this switch again.

3. “SCAN” switch (audio CD and CD text)

Push the “SCAN” switch. The player

will scan all the tracks on the disc. To

stop scanning, push this switch again.

When the player has scanned all the

tracks on the disc, it will stop scan-

ning.

CD MP3

223

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Screen adjustment

MP3 only—

3. “SCAN” switch

You can adjust the color, contrast, tone

and brightness of the screen.

Folder and file names will appear on the

screen when the “DVD” button is pushed.

When the “SCAN” switch is pushed, all

the files in

a

current folder will be

Push the “DISPLAY” button on the control-

ler and the “Display” screen will appear.

scanned. Only the first 10 seconds of

each file are played sequentially until

all the files are scanned. When the

switch is pushed for at least 0.8 sec-

onds, the first 10 seconds of each ini-

tial file of all the folders in the disk will

be played sequentially until the entire

initial files are scanned. To stop scan-

ning, push the switch again.

The details of the specific switches, con-

trols, and features are described below.

The screen may turn purple to deflect the

sunlight. This is not a malfunction.

1. “RPT” switch

When the “RPT” switch is pushed while

a track is played, the track file will be

played repeatedly until the switch is

pushed again. When the switch is

pushed for at least 0.8 seconds, all the

files in a folder will be played repeat-

edly. To turn off repeat play mode,

push the switch again.

4. “FLD ” switch

When the switch is pushed, the initial

file of the next folder will be played.

2. “RAND” switch

5. “ FLD” switch

When the “RAND” switch is pushed,

the files in

a

current folder will be

When the switch is pushed, the initial

file of the previous folder will be

played.

played in random order. When the

switch is pushed for at least 0.8 sec-

onds, all the files in the disk will be

played in random. To turn off random

play mode, push the switch again.

6. “DETAIL” switch

When the switch is pushed while

a

track is played, the detailed file infor-

mation of the track will be displayed.

224

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Selecting the video mode

After adjusting the screen, push the “ENT”

button or “DISPLAY” button to return to

the previous screen.

Operate the joystick up and down to se-

lect Brightness, Contrast, Tone, or Color

and left and right to make adjustments.

The audio machine connected to the input

terminal adapter can be played in the

video mode.

To select the video mode, push the

“VIDEO” button on the controller.

+ or

− or “Red”

“Green”

Brightness

Contrast

Darkens

Brightens

Weakens

the

Strengthen

s the

contrast

Weakens

the tone

Strengthen

s the tone

Tone

Strengthen Strengthen

Color

s the red

s the green

color

225

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—DVD video disc information

DVD PLAYER AND DVD VIDEO DISCS

Marks shown on DVD video discs:

DVD VIDEO DISC GLOSSARY

This DVD player conforms to NTSC col-

or TV formats. DVD video discs con-

forming to other formats such as PAL

or SECAM cannot be used.

DVD video discs: Digital Versatile Disc

that holds video. DVD video discs have

adopted “MPEG2”, one of the world stan-

dards of digital compression technologies.

The picture data is compressed by 1/40

on average and stored. Variable rate en-

coded technology in which the volume of

data assigned to the picture is changed

depending on the picture format has also

been adopted. Audio data is stored using

PCM and Dolby digital, which enables

higher quality of sound. Furthermore, mul-

ti−angle and multi−language features will

also help you enjoy the more advanced

technology of DVD video.

Indicates NTSC format

of color TV.

Region codes: Some DVD video discs

have a region code indicating where you

can use. If the DVD video disc is not

labeled “ALL” or “1”, you cannot use it in

this DVD player. If you attempt to play an

inappropriate DVD video disc in this play-

er, “REGION CODE ERROR” appears on

the screen. Even if the DVD video disc

does not have a region code, in some

cases you cannot use it.

Indicates the number

of audio tracks.

Indicates the number

of language subtitles.

Viewer restrictions: This feature limits

what can be viewed in conformity with the

level of restrictions of the country. The

level of restrictions varies depending on

the DVD video disc. Some DVD video

discs cannot be played at all, or violent

scenes are skipped or replaced with other

scenes.

Indicates the number

of angles.

Indicates the screen

to be selected.

Wide screen: 16:9

Standard: 4:3

Level 1: DVD video discs for children can

be played.

Indicates regions in

which this video disc

can be played.

ALL: all countries

Number: region code

Level 2—7: DVD video discs for children

and G−rated movies can be played.

226

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—A/V input adapter

Level 8: All types of DVD video discs can

be played.

Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic”, and

the double−D symbol are trademarks of

Dolby Laboratories. Confidential unpub-

lished works.

The rear entertainment system plays vid-

eos and sound when an audio−video

equipment is connected to the A/V input

adapter. For details, refer to the manufac-

turer’s instructions.

Multi−angle feature: You can enjoy the

same scene at different angles.

Multi−language feature: You can select

the language of the subtitles and audio.

E1992−1997 Dolby Laboratories. All

rights reserved.

Region codes: Region codes are provided

on DVD players and DVD discs. If the

DVD video disc does not have the same

region code as the DVD player, you can-

not play the disc on the DVD player. For

region codes, see page 226.

“dts” is a trademark of Digital Theater

Systems, Inc.

Audio: This DVD player can play liner

PCM, Dolby digital, dts and MPEG audio

format DVD. Other decoded type cannot

be played.

Title and chapter: Video and audio pro-

grams stored on DVD video discs are di-

vided in parts by title and chapter.

Title: The largest unit of the video and

audio programs stored on DVD video

discs. Usually, one piece of a movie, one

album, or one audio program is assigned

as a title.

Chapter: A unit smaller than a title. A title

comprises plural chapters.

227

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Power outlet

To use the adapter, open the cover.

This power outlet is designed for use as

a power supply for the audio device con-

nected to the A/V input adapter.

To use the power outlet, push the main

switch on the instrument panel.

The A/V input adapter is composed of 3

input adapters.

An indicator light will illuminate to indicate

that the power outlet is ready for use.

The key must be in the “ON” position for

the power outlet to be used.

Yellow: Image input adapter

Red: Audio input adapter

White: Audio input adapter

Push the main switch once again to turn

the power outlet off. When the power out-

let is not in use, make sure that the main

switch is turned off.

The maximum capacity for this power out-

let is 115 VAC/100W. If you attempt to

use an appliance that requires more than

115 VAC or 100W, the protection circuit

will activate and cut the power supply.

The power supply will restart automatically

when you use an appliance that operates

within the 115 VAC/100W limits.

NOTICE

Close the cover when the A/V input

adapter is not in use. Inserting a for-

eign object other than the appropriate

plug may cause electrical failure or

short circuit.

228

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Audio/video system operating

hints

D Other appliances requiring an extremely

stable power supply: microcomputer−

controlled electric blankets, touch sen-

sor lamps, etc.

NOTICE

z To prevent the battery from being

discharged, do not use the power

outlet longer than necessary when

the engine is not running.

To ensure correct audio/video system

operation:

Certain electrical appliances may cause

radio noise.

z Be careful not to spill beverages

over the audio system.

z Close the power outlet lid when the

power outlet is not in use. Inserting

a foreign object other than the ap-

propriate plug that fits the outlet

may cause electrical failure or short

circuit.

z Do not put anything other than a

compact disc into the slot.

z Do not put anything other than a

DVD video, video CD, dts−CD or au-

dio CD into the DVD player.

z The use of a cellular phone inside

or near the vehicle may cause a

noise from the speakers of the au-

dio system which you are listening

to. However, this does not indicate

a malfunction.

The power outlet is not designed for

the following electric appliances even if

their power consumption is under 115

VAC/100W. These appliances may not

operate properly.

D Appliances with high initial peak watt-

age: cathode−ray tube type televisions,

compressor−driven refrigerators, electric

pumps, electric tools, etc.

RADIO RECEPTION

Usually,

a

problem with radio reception

does not mean there is a problem with

your radio—it is just the normal result of

conditions outside the vehicle.

D Measuring devices which process pre-

cise data: medical equipment, measur-

ing instruments, etc.

229

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

For example, nearby buildings and terrain

can interfere with FM reception. Power

lines or telephone wires can interfere with

AM signals. And of course, radio signals

have a limited range. The farther you are

from a station, the weaker its signal will

be. In addition, reception conditions

change constantly as your vehicle moves.

Station swapping—If the FM signal you

CARING FOR YOUR COMPACT DISC

PLAYER, DVD PLAYER AND DISCS

are listening to is interrupted or weak-

ened, and there is another strong station

nearby on the FM band, your radio may

tune in the second station until the origi-

nal signal can be picked up again.

D Extremely high temperatures can keep

your compact disc player and DVD

player from working. On hot days, use

the air conditioning to cool the vehicle

interior before you use the players.

AM

Fading—AM broadcasts are reflected by

the upper atmosphere–especially at night.

These reflected signals can interfere with

those received directly from the radio sta-

tion, causing the radio station to sound

alternately strong and weak.

D Bumpy roads or other vibrations may

make your compact disc player and

DVD player skip.

Here are some common reception prob-

lems that probably do not indicate a prob-

lem with your radio:

D If moisture gets into your compact disc

player and DVD player, the players

may not play even though they appear

to be working. Remove the disc from

the player and wait until it dries.

FM

Fading and drifting stations—Generally, the

effective range of FM is about 40 km (25

miles). Once outside this range, you may

notice fading and drifting, which increase

with the distance from the radio transmit-

ter. They are often accompanied by distor-

tion.

Station interference—When a reflected sig-

nal and a signal received directly from a

radio station are very nearly the same

frequency, they can interfere with each

other, making it difficult to hear the broad-

cast.

CAUTION

Compact disc players and DVD play-

ers use an invisible laser beam which

could cause hazardous radiation ex-

posure if directed outside the unit. Be

sure to operate the players correctly.

Multi−path—FM signals are reflective,

making it possible for two signals to reach

your antenna at the same time. If this

happens, the signals will cancel each oth-

Static—AM is easily affected by external

sources of electrical noise, such as high

tension power lines, lightening, or electri-

cal motors. This results in static.

er out, causing

loss of reception.

a

momentary flutter or

Static and fluttering—These occur when

signals are blocked by buildings, trees, or

other large objects. Increasing the bass

level may reduce static and fluttering.

230

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Compact disc player

DVD player

Audio CDs

DVD video

discs

D Use only compact discs marked as

shown above. The following products

may not be playable on your compact

disc player.

Video CDs

Special shaped discs

SACD

dts−CD

Copy−protected CD

CD−R (CD−Recordable)

CD−RW (CD−Re−writable)

CD−ROM

D Use only discs marked as shown

above. The following products may not

be playable on your DVD player.

SACD

Copy−protected CD

CD−R (CD−Recordable)

CD−RW (CD−Re−writable)

CD−ROM

DVD−R

DVD+R

DVD+RW

DVD−RW

DVD−ROM

DVD−RAM

Transparent/translucent discs

231

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

NOTICE

z Do not use special shaped, trans-

parent/translucent, low quality or la-

beled discs such as those shown in

the illustrations. The use of such

discs may damage the player or

changer, or it may be impossible to

eject the disc.

z This system is not designed for use

of Dual Disc. Do not use Dual Disc

because it may cause damage to

the player or changer.

Correct

Wrong

Low quality discs

D Handle the discs carefully, especially

when you are inserting them. Hold

them on the edge and do not bend

them. Avoid getting fingerprints on

them, particularly on the shiny side.

D Dirt, scratches, warping, pin holes, or

other disc damage could cause the

player to skip or to repeat a section of

a chapter or track. (To see a pin hole,

hold the disc up to the light.)

D Remove discs from the compact disc

player when you are not playing them.

Store them in their plastic cases away

from moisture, heat, and direct sun-

light.

Labeled discs

232

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

MP3/WMA FILES

D WMA files can contain a WMA tag that

is used in the same way as an ID3

tag. WMA tags carry information such

as track title, artist name.

D MP3 (MPEG Audio Layer 3) and WMA

(Windows Media Audio) are audio com-

pression standards.

D The emphasis function is available only

when playing MP3/WMA files recorded

at 32, 44.1 and 48 kHz. (The system

can play MP3 files with sampling fre-

quencies of 16, 22.05, and 24 kHz.

However, the emphasis function is not

available for files recorded at these fre-

quencies.)

D The MP3/WMA player can play MP3

and WMA files on CD−ROM, CD−R and

CD−RW discs.

The unit can play disc recordings com-

patible with ISO 9660 level 1 and level

2 and with the Romeo and Joliet file

system.

D When naming an MP3 or WMA file,

add the appropriate file extension (.mp3

or .wma).

D The sound quality of MP3/WMA files

generally improves with higher bit

rates. In order to achieve a reasonable

level of sound quality, discs recorded

with a bit rate of at least 128 kbps are

recommended.

To clean a disc: Wipe it with a soft, lint−

free cloth that has been dampened with

water. Wipe in a straight line from the

center to the edge of the disc (not in

circles). Dry it with another soft, lint−free

cloth. Do not use a conventional record

cleaner or anti−static device.

D The MP3/WMA player plays back files

with .mp3 or .wma file extensions as

MP3 or WMA files. To prevent noise

and playback errors, use the appropri-

ate file extensions.

Playable bit rates

MP3 files:

MPEG1 LAYER3—64 to 320 kbps

MPEG2 LSF LAYER3—64 to 160 kbps

WMA files:

Ver. 7, 8 CBR—48 to 192 kbps

Ver. 9 CBR—48 to 320 kbps

D Multi−session compatible CDs can also

be played.

D MP3 files are compatible with the ID3

Tag Ver. 1.0, Ver. 1.1, Ver. 2.2, and

Ver. 2.3 formats. The unit cannot dis-

play disc title, track title and artist

name in other formats.

233

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

D The MP3/WMA player does not play

back MP3/WMA files from discs record-

er using packet write data transfer

(UDF format). Discs should be re-

corded using “pre−mastering” software

rather than packet−write software.

CD−R and CD−RW discs

D CD−R/CD−RW discs that have not been

subject to the “finalizing process” (a

process that allows discs to be played

on a conventional CD player) cannot

be played.

001.mp3

002.wma

Folder 1

003.mp3

D M3u playlists are not compatible with

D It may not be possible to play

CD−R/CD−RW discs recorded on a mu-

sic CD recorder or a personal comput-

er because of disc characteristics,

scratches or dirt on the disc, or dirt,

condensation, etc. on the lens of the

unit.

Folder 2

004.mp3

005.wma

the audio player.

D MP3i (MP3 interactive) and MP3PRO

formats are not compatible with the au-

dio player.

Folder 3

006.mp3

D The MP3 player is compatible with

VBR (Variable Bit Rate).

D It may not be possible to play discs

recorded on a personal computer de-

pending on the application settings and

the environment. Record with the cor-

rect format. (For details, contact the

appropriate application manufacturers of

the applications.)

D The play order of the compact disc

with the structure shown on the left is

as follows:

D When playing back files recorded as

VBR (Variable Bit Rate) files, the play

time will not be correctly displayed if

fast−forward or reverse operations are

used.

D It is not possible to check folders that

do not include MP3/WMA files.

D CD−R/CD−RW discs may be damaged

by direct exposure to sunlight, high

temperatures or other storage condi-

tions. The unit may be unable to play

some damaged discs.

D MP3/WMA files in folders up to 8 lev-

els deep can be played. However, the

start of playback may be delayed when

using discs containing numerous levels

of folders. For this reason, we recom-

mend creating discs with no more than

two levels of folders.

D If you insert a CD−RW disc into the

MP3/WMA player, playback will begin

more slowly than with a conventional

CD or CD−R disc.

D It is possible to play up to 192 folders

or 255 files on one disc.

234

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

D Recordings on CD−R/CD−RW cannot

be played using the DDCD (Double

Density CD) system.

ISO 9660 format—

WMA—

This is the international standard for the

formatting of CD−ROM folders and files.

For the ISO 9660 format, there are two

levels of regulations.

WMA (Windows Media Audio) is an audio

compression format developed by

Microsoft. It compresses files into a size

smaller than that of MP3 files. The decod-

ing formats for WMA files are Ver. 7, 8,

and 9.

TERMS

Packet write—

Level 1:

This is a general term that describes the

process of writing data on−demand to

CD−R, etc., in the same way that data is

written to floppy or hard discs.

The file name is in 8.3 format (8 charac-

ter file names, with

extension. File names must be composed

of one−byte capital letters and numbers.

The “_” symbol may also be included.)

a

3

character file

ID3 Tag—

This is a method of embedding track−re-

lated information in an MP3 file. This em-

bedded information can include the track

title, the artist’s name, the album title, the

music genre, the year of production, com-

ments and other data. The contents can

be freely edited using software with ID3

tag editing functions. Although the tags

are restricted to the number of characters,

the information can be viewed when the

track is played back.

Level 2:

The file name can have up to 31 charac-

ters (including the separation mark “.” and

file extension). Each folder must contain

fewer than 8 hierarchies.

m3u—

Playlists created using “WINAMP” software

have a playlist file extension (.m3u).

MP3—

WMA Tag—

MP3 is an audio compression standard

determined by a working group (MPEG) of

the ISO (International Standard Organiza-

tion). MP3 compresses audio data to

about 1/10 the size of that on convention-

al discs.

WMA files can contain a WMA tag that is

used in the same way as an ID3 tag.

WMA tags carry information such as track

title, artist name.

235

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Hands−free phone system—

—Reference

Phone Setup (see page 242)

Security (see page 247)

D Delete Speed Dial

D Pair phone

D Set PIN

The registered speed dial can be de-

leted.

To use the hands−free system, you

need to register your phone in the sys-

tem.

The PIN can be set or changed.

D Phone book lock

D List names

The registered names can be checked.

D Set Speed Dial

The phone book can be locked.

D Phone book unlock

D Change name

The registered phone names can be

changed.

Speed dials can be set

The locked phone book can be un-

locked.

Redial (see page 259)

D Delete

System Setup (see page 251)

D Adjust Guidance Volume

Guidance volume can be adjusted.

D Initialize

Callback (see page 260)

The registered phones can be deleted.

D List phones

Making a phone call (see page 262)

Receiving a phone call (see page 264)

Talking on the phone (see page 265)

The registered phone names can be

checked.

Phone Book (see page 251)

D Add Entry

D Select phone

The registered phones can be selected.

D Set passkey

Phone numbers and voice tags can be

registered.

The passkey can be changed.

D Change Name

The registered names can be changed.

D Delete Entry

The registered names can be deleted.

236

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Some basics

This system supports Bluetoothr,

a

wireless system that allows you to

make or receive calls without taking

your hands from the steering wheel and

without using cables to connect the

phone and system.

The system may not function in the follow-

ing conditions and places:

D The cellular phone is turned off.

D The current position is outside the

communication area.

D The cellular phone is not connected.

D The cellular phone has a low battery.

The phone must be paired to the system

before using the hands−free feature. If

your cellular phone does not support

Bluetoothr, this system will not function.

D The cellular phone is located behind

the seat or in the glove box and con-

sole box.

CAUTION

D The cellular phone touches or is cov-

ered with metal materials.

While you are driving, do not use a

This system supports the following ser-

vice.

cellular

Bluetoothr phone.

phone

or

connect

the

D HFP (Hands Free Profile) Ver.1.0

D OPP (Object Push Profile) Ver.1.1

NOTICE

If your cellular phone does not support

HFP, you cannot enter the Bluetoothr

phone, and take OPP service individually.

Do not leave your cellular phone in

the car. The temperature indoor may

be high and damage the phone.

Bluetooth is

a

trademark owned by

Bluetooth SIG. Inc.

237

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

When transferring ownership of the ve-

hicle:

NOTE: This equipment has been

tested and found to comply with the

limits for Class digital device,

pursuant to part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

FCC ID: BABBT010A

IC ID: 2024B−BT010A

MADE IN CHINA

A

lot of personal data is registered

a

B

when you use the hands−free system.

When transferring ownership of the ve-

hicle, initialize the system.

This device complies with Part 15 of the

FCC Rules and RSS−210. Operation is

subject to the following two conditions:

(1) This device may not cause harmful

interference, and (2) This device must

accept any interference received, includ-

ing interference that may cause unde-

sired operation.

interference in

a

residential installa-

If you initialize it, the former state will

never come back again. Pay much atten-

tion when initializing the data.

tion. This equipment generates, uses

and can radiate radio frequency ener-

gy and, if not installed and used in

accordance with the instructions, may

cause harmful interference to radio

communications. However, there is no

guarantee that interference will not oc-

cur in a particular installation. If this

equipment does cause harmful inter-

ference to radio or television recep-

tion, which can be determined by turn-

ing the equipment off and on, the user

is encouraged to try to correct the

interference by one or more of the

following measures:

You can initialize the following data in the

system.

D Phone book data

D Dialed numbers and received calls

D Speed dial

CAUTION

D Bluetoothr phone data

D Security code

Changes or modifications not ex-

pressly approved by the party respon-

sible for compliance could void the

user’s authority to operate the equip-

ment.

−Reorient or relocate the receiving an-

tenna.

−Increase the separation between the

equipment and receiver.

−Connect the equipment into an outlet

on

a

circuit different from that to

which the receiver is connected.

−Consult the dealer or an experienced

radio/TV technician for help.

238

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Control and features

"Steering switches and microphone

1. Volume control switch

CAUTION: Radio Frequency Radiation

Exposure

To increase the volume: Push “+”.

To decrease the volume: Push “−”.

This equipment complies with FCC/IC

radiation exposure limits set forth for

uncontrolled equipment and meets the

FCC radio frequency (RF) Exposure

Guidelines in Supplement C to OET65

and RSS−102 of the IC radio frequen-

cy (RF) Exposure rules. This equip-

ment has very low levels of RF ener-

gy that it deemed to comply without

maximum permissive exposure evalua-

tion (MPE). But it is desirable that it

should be installed and operated with

at least 20 cm and more between the

radiator and person’s body (excluding

extremities: hands, wrists, feet and

legs).

When driving at 80 km/h (50 mph) or

more, the volume automatically increases

without switch adjustment. When your

speed falls below 70 km/h (43 mph), the

volume automatically returns to its original

level.

Voice guidance volume cannot be changed

by pushing the volume control switch on

the steering wheel.

2. Talk switch

Steering switches

Pushing the talk switch turns the hands−

free system on and initiates the speech

command system.

3. On−hook switch

Co−location: This transmitter must

not be co−located or operated in con-

junction with any other antenna or

transmitter.

When the hands−free system is on, push-

ing the on−hook switch turns the hands−

free system off.

Pushing and holding the talk switch ends

the speech command system.

4. Off−hook switch

Pushing the off−hook switch turns the

hands−free system on.

When receiving a call, pushing the off−

hook switch allows you to talk on the

phone.

Microphone

239

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

5. Microphone

The microphone is used when talking on

the phone or using the speech command

system.

240

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

"Audio unit

1. Display

Displays such items as the reception lev-

el, a party’s name and phone number. See

“DISPLAY” described on the following

page for further details about the display.

2. “AUDIO CONTROL” knob

Turning the “AUDIO CONTROL” knob dis-

plays the menu items, names, numbers,

etc. to be selected. To select an item,

push the “AUDIO CONTROL” knob. Due to

safety concerns, the “AUDIO CONTROL”

knob does not function while the vehicle

is in motion.

3. “TEXT” button

When the party’s name or phone number

is too long to be displayed, pushing and

holding the “TEXT” button displays the re-

maining characters.

4. Preset buttons

Pushing the preset button displays the

registered speed dial numbers.

241

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Phone Setup

2. Reception level display

The phone setup menu includes the fol-

lowing:

Displays the cellular phone reception lev-

els. This may not match the display on

the cellular phone. The reception level of

some cellular phones may not be dis-

played.

D Pair Phone

To use the hands−free system, you need

to register your phone in the system.

Once you have registered it, you can

make a hands−free call. Up to 6 phones

can be registered.

The number of bars is greater when the

signal received is stronger.

3. Message display

D Select Phone

Displays phone numbers, names, com-

ments, menu items, etc.

When the system connects to Bluetoothr,

the phone previously used is automatically

selected. Select a different phone if nec-

essary. Only the selected phone can be

used with the hands−free system.

DISPLAY

1. Bluetoothr display

D Change Name

Displays when a Bluetoothr connection is

made. If there is no display, the

Bluetoothr connection has not been made

and communication between the phone

and system is not possible. When using

the hands−free system, make sure that

[BT] is displayed. The display is updated

in real time.

The registered phone names can be

changed.

D List Phones

The registered phone names can be

checked.

The following can be performed during the

name playback:

D Select phone

D Change name

D Delete

242

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

D Set PassKey

To pair phones

[The phone is paired and ready for use.

Returning to the main menu.] is heard and

[Paired] is displayed.

The passkey can be changed. A 4 to 8

digit code can be input as a passkey.

1. Push the talk switch and say [Pair

phone], or turn the “AUDIO CONTROL”

knob until [Pair Phone] is displayed

and push the knob.

The system may not function in the follow-

ing cases:

D Delete

The registered phones can be deleted.

To enter the phone setup menu

[Pair. Push the talk switch and say

name for the phone.] is heard.

a

D If 6 phones have already been regis-

tered.

1. Push the off−hook switch to turn the

hands−free system on.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Record Name] is displayed, push the

knob and say the desired phone name.

D If the vehicle is moving.

D If the system cannot communicate with

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Setup] is displayed and push the knob.

the phone.

∗

: Passkey is a password required to reg-

[Push the talk switch and say confirm.

Otherwise, say go back.] is heard.

ister a phone to the system.

[Setup. Please push the talk switch and

say security, or phone setup.] is heard.

INFORMATION

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Phone Setup] is displayed and push

the knob.

D To use the hands−free system, you

need to register your phone in the

system. Once you have registered

it, you can make a hands−free call.

Up to 6 phones can be registered.

[XXX (desired phone name) Ready for

phone pairing. Please use the phone to

connect it to the hands−free system. The

passkey for the phone is....] is heard.

[Phone setup. Push the talk switch and

say pair phone, select phone, change

name, list phones, set passkey or delete.]

is heard.

D For the operation of the phone, see

the manual that comes with your

cellular phone.

After [HANDS FREE] is displayed, a pass-

∗

[XXX (phone name) already selected.] is

heard and the phone name is displayed.

key

is displayed and [Searching.] is

D The passkey can be changed. See

page 246 for changing the passkey.

heard.

If no phone has been registered, the sys-

tem may not function properly.

4. Input the displayed passkey into the

phone.

243

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

To select a phone

When the phone is selected by using

To change a name

the knob:

1. Push the talk switch and say [Select

phone], or turn the “AUDIO CONTROL”

knob until [Select Phone] is displayed

and push the knob.

1. Push the talk switch and say [Change

name], or turn the “AUDIO CONTROL”

knob until [Change Name] is displayed

and push the knob.

[XXX selected. Returning to the phone

setup.] is heard.

The system may not function in the follow-

ing cases:

[Select phone. Push the talk switch and

say the phone name or say list phones.]

is heard.

[Change name. Push the talk switch and

say the phone name to change.] is heard.

D If the phone is not found.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

the phone name that you want to

change is displayed and push the

knob.

D If the system does not recognize the

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

the desired phone name is displayed

and push the knob.

voice command.

When the phone is selected by a voice

command:

[XXX (phone name) Push the talk switch

and say confirm. Otherwise, say go back.]

is heard and the phone name is displayed.

Follow voice guidance instructions, or turn

the “AUDIO CONTROL” knob until [Con-

firm] is displayed and push the knob.

[XXX selected. Returning to the phone

setup.] is heard.

244

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

When the phone is selected by a voice

command:

When the phone is selected by using

the knob:

The system may not function in the follow-

ing cases:

[XXX (phone name) Push the talk switch

and say confirm. Otherwise, say go back.]

is heard and the phone name is displayed.

[XXX Push the talk switch and say con-

firm. Otherwise, say go back.] is heard

and the phone name is displayed.

D If no phone has been registered.

D If the system does not recognize the

voice command.

1. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

1. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

To list phones

1. Push the talk switch and say [List

phones], or turn the “AUDIO CON-

TROL” knob until [List Phones] is dis-

played and push the knob.

[Push the talk switch and say

name.] is heard.

a

new

[Push the talk switch and say

name.] is heard.

a

new

[List phones. To select a name, push the

talk switch during the name playback.] is

heard.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Record Name] is displayed, push the

knob and say the desired phone name.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Record Name] is displayed, push the

knob and say the desired phone name.

2. Follow voice guidance instructions.

[Push the talk switch and say select

phone, change name, or delete.] is heard.

[XXX Push the talk switch and say con-

firm. Otherwise, say go back.] is heard.

[XXX Push the talk switch and say con-

firm. Otherwise, say go back.] is heard.

Select one of the following:

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[Name changed. Returning to the phone

setup.] is heard and [Changed] is dis-

played.

[Name changed. Returning to the phone

setup.] is heard and [Changed] is dis-

played.

245

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Select phone

To set a passkey

When using the knob:

Push the talk switch and say [Select

phone], or turn the “AUDIO CONTROL”

knob until [Select Phone] is displayed and

push the knob.

1. Push the talk switch and say [Set

passkey], or turn the “AUDIO CON-

TROL” knob until [Set Passkey] is dis-

played and push the knob.

1. Turn the “AUDIO CONTROL” knob to

select

a

number. Push the “AUDIO

CONTROL” knob to set.

2. When the passkey is set, push the

“AUDIO CONTROL” knob.

For further details on selecting a phone,

see page 244.

[Set Passkey. The passkey is required for

the phone pairing process. Push the talk

switch and say a new passkey.] is heard

and passkey is displayed.

[Passkey changed. Returning to the phone

setup.] is heard.

Change name

Push the talk switch and say [Change

name], or turn the “AUDIO CONTROL”

knob until [Change Name] is displayed

and push the knob.

The system does not function in the fol-

lowing cases:

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob to

select a number.

D If the passkey has less than 4 digits.

D If the passkey has more than 8 digits.

When using a voice command:

For further details on changing a name,

see page 244.

[XXXX (new passkey) Push the talk switch

and say confirm. Otherwise, continue add-

ing numbers, or say go back or delete.]

is heard and the new passkey is dis-

played.

Delete

Push the talk switch and say [Delete], or

turn the “AUDIO CONTROL” knob until

[Delete] is displayed and push the knob.

Follow voice guidance instructions, or turn

For further details on deleting a phone,

see page 247.

the

“AUDIO

CONTROL”

knob

until

[Confirm] is displayed and push the knob.

If no phone has been registered, the sys-

tem may not function properly.

[Passkey changed. Returning to the phone

setup.] is heard.

246

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Security

To delete a phone

The system may not function in the follow-

ing cases:

The security menu includes the following:

1. Push the talk switch and say [Delete],

or turn the “AUDIO CONTROL” knob

until [Delete] is displayed and push the

knob.

D Set PIN (Personal Identification Num-

D If no phone has been registered.

ber)

D If the system does not recognize the

The PIN can be set or changed.

D Phone book lock

voice command.

[Delete. Push the talk switch and say the

phone name to delete.] is heard.

The phone book can be locked.

When the phone book is locked, the fol-

lowing functions cannot be used:

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

the phone name you want to delete is

displayed and push the knob.

D Dial by name

D Redial

When using a voice command:

D Callback

[XXX (desired phone name) Push the talk

switch and say confirm. Otherwise, say go

back.] is heard and the phone name is

displayed.

D Speed Dial

D PhoneBook

D Phone book unlock

The locked phone book can be unlocked.

Follow voice guidance instructions, or turn

the “AUDIO CONTROL” knob until [Con-

firm] is displayed and push the knob.

[Deleted. Returning to the phone setup.] is

heard and $[Deleted]$ is displayed.

When using the knob:

[Deleted. Returning to the phone setup.] is

heard and [Deleted] is displayed.

247

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

To enter the security menu

To set a PIN

When using a voice command:

1. Push the off−hook switch to turn the

hands−free system on.

Push the talk switch and say [Set PIN],

or turn the “AUDIO CONTROL” knob until

[Set PIN] is displayed and push the knob.

1. Push the talk switch and say a new

PIN number.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Setup] is displayed and push the knob.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[There is no PIN number set. Please reg-

ister a PIN number. Please push the talk

switch and say a four−digit PIN number.]

is heard.

[Setup. Please push the talk switch and

say security, or phone setup.] is heard.

[The PIN number has been set. Returning

to the security.] is heard and [Completed]

is displayed.

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Security] is displayed and push the

knob.

When using the knob:

1. Turn the “AUDIO CONTROL” knob to

[Security. Push the talk switch and say

set PIN, phone book lock, or phone book

unlock.] is heard.

select

a

number. Push the “AUDIO

CONTROL” knob to set.

2. Repeat the above procedure until the

entire four−digit number is set.

3. When the PIN is set, push the “AUDIO

CONTROL” knob.

4. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[The PIN number has been set. Returning

to the security.] is heard and [Completed]

is displayed.

248

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

If the PIN is to be changed:

To lock the phone book

When using a voice command:

[There is a PIN number in place. Push the

talk switch and say the correct PIN num-

ber.] is heard and [Current PIN?] is dis-

played.

1. Push the talk switch and say [Phone

book lock], or turn the “AUDIO CON-

TROL” knob until [Phbk Lock] is dis-

played and push the knob.

[XXXX (PIN number) Push the talk switch

and say confirm. Otherwise, say go back.]

is heard and PIN number is displayed.

Follow voice guidance instructions, or turn

1. Follow voice guidance instructions, or

use the “AUDIO CONTROL” knob to

input the current PIN number.

[There is a PIN number in place. Push the

talk switch and say the correct PIN num-

ber.] is heard and [Current PIN?] is dis-

played.

the

“AUDIO

CONTROL”

knob

until

[Confirm] is displayed and push the knob.

[PIN number accepted. The phone book is

now locked. Returning to the main menu.]

is heard and [Locked] is displayed.

[Please push the talk switch and say a

four−digit PIN number.] is heard.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob to

select a number.

2. Push the talk switch and say new PIN

number.

When using the knob:

1. Turn the “AUDIO CONTROL” knob to

[The PIN number has been set. Returning

to the security.] is heard and [Completed]

is displayed.

select

a

number. Push the “AUDIO

CONTROL” knob to set.

2. When the PIN number is set, push the

“AUDIO CONTROL” knob.

If the current number is not correct, the

system does not function properly.

[XXXX Push the talk switch and say con-

firm. Otherwise, say go back.] is heard

and PIN number is displayed.

INFORMATION

Do not forget your PIN. If you forget

the PIN, initialization will be neces-

sary. For details about initialization,

see page 251.

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[PIN number accepted. The phone book is

now locked. Returning to the main menu.]

is heard and [Locked] is displayed.

249

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

The system may not function in the follow-

ing cases:

When using a voice command:

The system may not function in the follow-

ing cases:

[XXXX (PIN number) Push the talk switch

and say confirm. Otherwise, say go back.]

is heard and the PIN number is displayed.

D If the current number is not correct.

D If the phone book has already been

locked.

Follow voice guidance instructions, or turn

unlocked.

the

“AUDIO

CONTROL”

knob

until

D If the PIN number does not exist.

INFORMATION

[Confirm] is displayed and push the knob.

To unlock the phone book

[PIN number accepted. The phone book is

now unlocked. Returning to the main

menu.] is heard and [Unlocked] is dis-

played.

A shortcut to each of the following

functions is available. Enter the

phone book menu, push the off−hook

switch, and say either of the follow-

ing:

1. Push the talk switch and say [Phone

book unlock], or turn the “AUDIO CON-

TROL” knob until [Phbk Unlock] is dis-

played and push the knob.

When using the knob:

[Phonebook unlock. There is a PIN num-

ber in place. Push the talk switch and say

the correct PIN number.] is heard and

[Current PIN?] is displayed.

D Phone book lock

1. Turn the “AUDIO CONTROL” knob to

select

a

number. Push the “AUDIO

D Phone book unlock

CONTROL” knob to set.

2. When the PIN number is set, push the

“AUDIO CONTROL” knob.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob to

select a number.

[XXXX Push the talk switch and say con-

firm. Otherwise, say go back.] is heard

and the PIN number is displayed.

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[PIN number accepted. The phone book is

now unlocked. Returning to the main

menu.] is heard and [Unlocked] is dis-

played.

250

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—System Setup

—Phone Book

The system setup menu includes the fol-

lowing:

To initialize

The phone book menu includes the follow-

ing:

1. Turn the “AUDIO CONTROL” knob until

[Initialize] is displayed and push the

knob.

D Adjust Guidance Volume

D Initialize

D Add Entry

Phone numbers and voice tags can be

registered.

[System initialization. This will erase all

user information in the hands free system;

including paired phones, phone book en-

tries, and call history. Select confirm to

initialize. Otherwise, select go back.] is

heard.

To enter the system setup menu

D Change Name

1. Push the off−hook switch to turn the

hands−free system on.

The registered names can be changed.

D Delete Entry

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Setup] is displayed and push the knob.

The registered names can be deleted.

D Delete Speed Dial

2. Turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

3. Turn the “AUDIO CONTROL” knob until

[System Setup] is displayed and push

the knob.

The registered speed dial can be deleted.

D List Names

[System initialization. This will erase all

user information in the hands free system;

including paired phones, phone book en-

tries, and call history. Select confirm to

initialize. Otherwise, select go back.] is

heard.

[System setup. Please select guidance

volume or initialize.] is heard.

The registered names can be checked.

D Set Speed Dial

To adjust the guidance volume

Speed dials can be set.

1. Turn the “AUDIO CONTROL” knob until

[Guidance Vol] is displayed and push

the knob.

Up to 20 numbers can be registered in

the phone book.

3. Turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[Guidance will be at this volume] is heard

and the present volume level is displayed.

[Initialized. Returning to the main menu.]

is heard.

2. Turn the “AUDIO CONTROL” knob to

adjust the volume and push the knob.

251

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

To enter the phone book menu

To add entry

(a) By Voice

1. Push the off−hook switch to turn the

hands−free system on.

The add entry includes the following:

(a) By Voice

1. Push the talk switch and say [By

voice], or turn the “AUDIO CONTROL”

knob until [By Voice] is displayed and

push the knob.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Phonebook] is displayed and push the

knob.

(b) By Phone

(c) Call History

[Voice entry. Push the talk switch and say

the number.] is heard.

(d) Manual Input

[Phone book. Please push the talk switch

and say add entry, change name, delete

entry, list names, set speed dial or delete

speed dial.] is heard.

2. Push the talk switch and say the dial

number that you want to register.

Push the talk switch and say [Add entry],

or turn the “AUDIO CONTROL” knob until

[Add Entry] is displayed and push the

knob.

[To store, push the talk switch and say

confirm. Otherwise, continue adding num-

bers, or say go back, or delete.] is heard

and number is displayed.

If the phone book is locked, the system

may not function properly.

[Add Entry. How will the number be en-

tered. Push the talk switch and say by

voice, by phone, or call history.] is heard.

3. Follow voice guidance instructions.

252

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

If [Confirm] is said, then input a voice

tag.

Confirm

(b) By Phone

Push the talk switch and say [Confirm], or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the knob.

1. Push the talk switch and say [By

phone], or turn the “AUDIO CONTROL”

knob until [By Phone] is displayed and

push the knob.

[Push the talk switch and say a name.] is

heard.

1. Push the talk switch and say the name

of the dial number that you want to

register.

[Returning to the phone book.] is heard.

[Phone entry. Prepare to send the informa-

tion from the phone. When ready, push

the talk switch and say confirm.] is heard.

Speed Dial

1. Push the talk switch and say [Set

speed dial], or turn the “AUDIO CON-

TROL” knob until [Speed Dial] is dis-

played and push the knob.

[XXXX (phone number) Push the talk

switch and say confirm. Otherwise, say go

back.] is heard.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[Set speed dial. Push the preset button to

assign to XXXX] is heard.

[Send the information at this time.] is

heard.

2. Push and hold the desired preset but-

ton.

[Stored. To register this as a speed dial

entry, push the talk switch and say set

speed dial. Otherwise, say confirm.] is

heard and [Stored] is displayed.

After the system has received the name

and phone number, [Push the talk switch

and say confirm. To select an alternate

number, say next or previous. Otherwise,

say go back.] is heard and the name and

phone number are displayed.

[preset... is now assigned. Returning to

the phone book.] is heard.

The system may not function in the follow-

ing cases:

3. Select one of the following:

D Confirm

D If the phone book is full.

3. Follow voice guidance instructions,

push the talk switch and say [Confirm],

or turn the “AUDIO CONTROL” knob

until the dial number that you want to

register is displayed and push the

knob.

D If the dial number has more than 24

D Speed Dial

digits.

Next, input a voice tag.

For further details, see page 252.

253

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

(c) Call History

Outgoing

(d) Manual Input

1. Push the talk switch and say [Call his-

tory], or turn the “AUDIO CONTROL”

knob until [Call History] is displayed

and push the knob.

1. Push the talk switch and say [Outgo-

ing], or turn the “AUDIO CONTROL”

knob until [Outgoing] is displayed and

push the knob.

1. Turn the “AUDIO CONTROL” knob until

[Manual Input] is displayed and push

the knob.

2. Turn the “AUDIO CONTROL” knob to

[Call history. Push the talk switch and say

incoming or outgoing.] is heard and [Call

History] is displayed.

[Most recent outgoing call was XXXX] is

heard and the outgoing number is dis-

played.

select

a

number. Push the “AUDIO

CONTROL” knob to set.

3. When the number is set, push the

“AUDIO CONTROL” knob.

2. Select one of the following:

D Incoming

[Push the talk switch and say confirm.

Otherwise, say previous, or go back.] is

heard.

Next, input a voice tag.

D Outgoing

For further details, see page 252.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

the dial number that you want to regis-

ter is displayed and push the knob.

Incoming

INFORMATION

1. Push the talk switch and say [Incom-

ing], or turn the “AUDIO CONTROL”

knob until [Incoming] is displayed and

push the knob.

D The system can recognize single

digits from zero to nine, #(pound),

*(star), and +(plus). Numbers that

are ten or greater are not recog-

nized.

Next, input a voice tag.

For further details, see page 252.

[Most recent incoming call was XXXX

(phone number)] is heard and the incom-

ing number is displayed.

D To speed up input, it is a good idea

to group all digits into a continuous

string. However, you can enter each

digit individually or group digits to-

gether in preferred string lengths.

[Push the talk switch and say confirm.

Otherwise, say previous, or go back.] is

heard.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

the dial number that you want to regis-

ter is displayed and push the knob.

The display corresponding to each op-

eration appears on the screen as fol-

lows:

Next, input a voice tag.

For further details, see page 252.

254

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

To list names

Input operation—

Display: [995]

The voice tags can be edited during the

name playback.

You say: [Nine, nine, five]

Repeating the above operation deletes

the last digits in reverse order of in-

put.

Voice output: [995 to store push the

talk switch and say confirm. Other-

wise, continue adding numbers, or

say go back, or delete.]

1. Push the talk switch and say [List

names], or turn the “AUDIO CONTROL”

knob until [List Names] is displayed

and push the knob.

Delete operation—

You say: [Delete]

Display: [995]

Voice output: [Deleted. Push the talk

switch and say the number.]

[List names. To select a name, push the

talk switch during the name playback.] is

heard.

You say: [Seven, three, four]

Voice output: [734 to store push the

talk switch and say confirm. Other-

wise, continue adding numbers, or

say go back, or delete.]

Display: [Delete]

2. Follow voice guidance instructions.

The display will return to the initial

screen that allows a number to be

input.

[XXXX selected.] is heard and [Selected]

is displayed.

Display: [995734]

If you push the off−hook switch during the

name playback, you can dial the number

of the selected name.

Repeat the above procedure until the

entire number that you want to regis-

ter is input.

Go back operation—

You say: [Go back]

Voice output: [Go back. The last num-

bers said have been removed. Push

the talk switch and say the number.]

255

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Editing the voice tags

The following can be performed:

D Dial

Delete Entry

To delete entry

Push the talk switch and say [Delete

entry], or turn the “AUDIO CONTROL”

knob until [Delete Entry] is displayed and

push the knob.

1. Push the talk switch and say [Delete

entry], or turn the “AUDIO CONTROL”

knob until [Delete Entry] is displayed

and push the knob.

D Change Name

D Delete Entry

For further details, see page 256.

[Delete entry. Push the talk switch and

say the name to delete.] is heard.

D Speed Dial

Speed dial

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

the name that you want to delete is

displayed and push the knob.

[Push the talk switch and say dial, change

name, delete entry, or set speed dial.] is

heard and [Selected] is displayed.

Push the talk switch and say [Set speed

dial], or turn the “AUDIO CONTROL” knob

until [Speed Dial] is displayed and push

the knob.

Dial

When using a voice command:

Push the talk switch and say [Dial], or

turn the “AUDIO CONTROL” knob until

[Dial] is displayed and push the knob.

For further details, see page 258.

[XXXX (name) Push the talk switch and

say confirm. Otherwise, say go back.] is

heard and the name is displayed.

Change Name

Follow voice guidance instructions, or turn

Push the talk switch and say [Change

name], or turn the “AUDIO CONTROL”

knob until [Change Name] is displayed

and push the knob.

the

“AUDIO

CONTROL”

knob

until

[Confirm] is displayed and push the knob.

[Deleted. Returning to the phone book.] is

heard and [Deleted] is displayed.

For further details, see page 257.

When using the knob:

[Deleted. Returning to the phone book.] is

heard and [Deleted] is displayed.

The system may not function in the follow-

ing cases:

D If no name has been registered.

D If the system does not recognize the

voice command.

256

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

To delete speed dial

To change name

When using a voice command:

1. Push the talk switch and say [Delete

speed dial], or turn the “AUDIO CON-

TROL” knob until [Del Spd Dial] is dis-

played and push the knob.

1. Push the talk switch and say [Change

name], or turn the “AUDIO CONTROL”

knob until [Change Name] is displayed

and push the knob.

[XXXX (phone number) Push the talk

switch and say confirm. Otherwise, say go

back.] is heard and the phone number is

displayed.

[Delete speed dial. Push the preset button

to delete from speed dial.] is heard.

[Change name. Push the talk switch and

say the name to change.] is heard.

1. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

2. Select the preset button that you want

to delete.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

the dial number that you want to

change is displayed and push the

knob.

[Push the talk switch and say

name.] is heard.

a

new

[To delete preset... push the talk switch

and say confirm. Otherwise, say go back.]

is heard.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Record Name] is displayed, push the

knob and say new name.

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[XXXX Push the talk switch and say con-

firm. Otherwise, say go back.] is heard.

[Deleted.] is heard and [Deleted] is dis-

played.

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[Returning to the phone book.] is heard.

The system may not function in the follow-

ing cases:

[Name changed. Returning to the phone

book.] is heard and [Changed] is dis-

played.

D If no speed dial has been registered.

D If the preset button has not been as-

signed.

257

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

When using the knob:

To set speed dial

When using a voice command:

[Push the talk switch and say

name.] is heard.

a

new

1. Push the talk switch and say [Set

Speed dial], or turn the “AUDIO CON-

TROL” knob until [Speed Dial] is dis-

played and push the knob.

[XXXX (phone number) To register this as

a speed dial entry, push the talk switch

and say confirm. Otherwise, say go back.]

is heard and the phone number is dis-

played.

1. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Record Name] is displayed, push the

knob and say new name.

[Set speed dial. Push the talk switch and

say a name.] is heard.

1. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[XXXX Push the talk switch and say con-

firm. Otherwise, say go back.] is heard.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

the dial number that you want to regis-

ter is displayed and push the knob.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[Push the preset button to assign to

XXXX] is heard.

2. Push and hold the desired preset but-

ton.

[Name changed. Returning to the phone

book.] is heard and [Changed] is dis-

played.

[preset... is now assigned. Returning to

the phone book.] is heard.

The system may not function in the follow-

ing cases:

When using the knob:

[Push the preset button to assign to

XXXX] is heard.

D If no name has been registered.

D If the system does not recognize the

Push and hold the desired preset button.

voice command.

[preset... is now assigned. Returning to

the phone book.] is heard.

The system may not function in the follow-

ing cases:

D If no name has been registered.

D If the system does not recognize the

voice command.

258

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Redial

The following can be performed:

Dial

INFORMATION

D Dial

Turn the “AUDIO CONTROL” knob until

the number that you want to dial is dis-

played and push the knob. After that, do

the one of the following:

A shortcut to each of the following

functions is available. Push the off−

hook switch and talk switch, and say

one of the following:

D Delete

D Store

To enter the redial

D Push the off−hook switch.

D Phone book add entry

1. Push the off−hook switch to turn the

hands−free system on.

D Push the talk switch and say [dial].

D Phone book change name

D Phone book delete entry

D Phone book delete speed dial

D Phone book list names

D Phone book set speed dial

D Turn the “AUDIO CONTROL” knob until

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Redial] is displayed and push the

knob.

[Dial] is displayed and push the knob.

Delete

1. Turn the “AUDIO CONTROL” knob until

the dial number that you want to delete

is displayed and push the knob.

[Redial. Most recent outgoing call was

XXXX (phone number)] is heard and out-

going history is displayed.

2. Push the talk switch and say [Delete],

or turn the “AUDIO CONTROL” knob

until [Delete] is displayed and push the

knob.

[Please push the off−hook switch to dial.

Otherwise, push the talk switch and say

dial, previous, go back, store, or delete.]

is heard.

[Delete. Push the talk switch and say con-

firm. Otherwise, say go back] is heard.

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[Deleted.] is heard.

259

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Callback

Store

The following can be performed:

INFORMATION

1. Turn the “AUDIO CONTROL” knob until

the dial number that you want to regis-

ter is displayed and push the knob.

D Dial

D Up to five outgoing calls can be

stored in the system.

D Delete

D Store

D When five outgoing calls are stored

in memory, the oldest outgoing call

is deleted to make room in memory

for new calls.

2. Push the talk switch and say [Store],

or turn the “AUDIO CONTROL” knob

until [Store] is displayed and push the

knob.

To enter the callback

1. Push the off−hook switch to turn the

hands−free system on.

D Only the latest outgoing call is

stored when the same telephone

number is dialed.

[Store. Push the talk switch and say con-

firm. Otherwise, say go back.] is heard.

2. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Callback] is displayed and push the

knob.

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

D A shortcut to “Redial” is available.

Push the off−hook switch and then

push the off−hook switch.

[Callback. Most recent incoming call was

XXXX (phone number)] is heard and in-

coming history is displayed.

Next, input a voice tag.

[Please push the off−hook switch to dial.

Otherwise, push the talk switch and say

dial, previous, go back, store, or delete.]

is heard.

For further details, see page 252.

The system may not function in the follow-

ing cases:

D If there is no outgoing history.

D If the phone book is locked.

260

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

Dial

Store

INFORMATION

Turn the “AUDIO CONTROL” knob until

the number that you want to dial is dis-

played and push the knob. After that, do

the one of the following:

1. Turn the “AUDIO CONTROL” knob until

the dial number that you want to regis-

ter is displayed and push the knob.

D Up to five incomming calls can be

stored in the system.

D When five incomming calls are

stored in memory, the oldest incom-

ming call is deleted to make room

in memory for new calls.

2. Push the talk switch and say [Store],

or turn the “AUDIO CONTROL” knob

until [Store] is displayed and push the

knob.

D Push the off−hook switch.

D Push the talk switch and say [Dial].

D Turn the “AUDIO CONTROL” knob until

[Store. Push the talk switch and say con-

firm. Otherwise, say go back.] is heard.

[Dial] is displayed and push the knob.

Delete

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

1. Turn the “AUDIO CONTROL” knob until

the dial number that you want to delete

is displayed and push the knob.

2. Push the talk switch and say [Delete],

or turn the “AUDIO CONTROL” knob

until [Delete] is displayed and push the

knob.

Next, input a voice tag.

For further details, see page 252.

The system may not function in the follow-

ing cases:

[Delete. Push the talk switch and say con-

firm. Otherwise, say go back] is heard.

D If there is no incoming history.

D If the phone book is locked.

3. Follow voice guidance instructions, or

turn the “AUDIO CONTROL” knob until

[Confirm] is displayed and push the

knob.

[Deleted.] is heard.

261

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Making a phone call

If the cellular phone is not registered, this

system cannot be used. See page 242 for

To speed dial

When using a voice command:

1. Push the preset button where the de-

sired number is set. The name or tele-

phone number is displayed.

[XXXX (phone number) Push the off−hook

switch to dial. Otherwise, push the talk

switch and say dial, or go back.] is heard.

After that, do the one of the following:

registering

a

cellular phone. Make sure

that [BT] is displayed and get the cellular

phone ready to use.

2. Push the off−hook switch to dial.

There are 3 ways to make a phone call

with this system.

D Push the off−hook switch.

To dial by Name

D Push the talk switch and say [Dial].

1. Push the talk switch and say [Dial by

name].

D Speed dial

D Turn the “AUDIO CONTROL” knob until

A phone call can be made with a preset

button in which a phone number is regis-

tered. See page 258 for setting the preset

buttons.

[Dial] is displayed and push the knob.

[Dial by name. Please push the talk

switch and say the stored name, or say

list names.] is heard and [Dial by Name]

is displayed.

When using the knob:

It calls the number.

D Dial by Name

The system may not function in the follow-

ing cases:

2. Push the talk switch and say the

phone name, or turn the “AUDIO CON-

TROL” knob until the name that you

want to dial is displayed and push the

knob.

The system dials the numbers correspond-

ing to the spoken names registered in the

system.

D If there is no number registered in the

preset button.

D Dial by Number

D If the system does not recognize the

voice command.

The system dials to the spoken numbers.

To make a phone call

Push the off−hook switch to turn the

hands−free system on.

262

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

To dial by Number

INFORMATION

1. Push the talk switch and say [Dial by

Number].

D The phone numbers registered in

the phone book can be retrieved.

D The system can recognize single

digits from zero to nine, #(pound),

*(star), and +(plus). Numbers that

are ten or greater are not recog-

nized.

[Dial by number. Please push the talk

switch and say the number.] is heard and

[Dial by Num] is displayed.

D The system does not recognize that

the voice tag is not registered in

the registered cellular phone. For

details about voice tags, see “To

add entry” on page 252.

2. Push talk switch and say the dial num-

ber.

D To speed up input, it is a good idea

to group all digits into a continuous

string. However, you can enter each

digit individually or group digits to-

gether in preferred string lengths.

[Push the off−hook switch to dial. Other-

wise, push the talk switch and say dial,

go back, or delete.] is heard.

D A shortcut to [Dial by name] is

available. Push the talk switch and

say [Dial XXX (name you want to

dial)].

To dial the number, do the one of the

following:

The display corresponding to each op-

eration appears on the screen as fol-

lows:

D Push the off−hook switch.

Input operation—

D Push the talk switch and say [Dial].

You say: [Nine, nine, five]

D Turn the “AUDIO CONTROL” knob until

[Dial] is displayed and push the knob.

Voice output: [995 push the off−hook

switch to dial. Otherwise, push the

talk switch and say dial, go back, or

delete.]

If the number exceeds 24 digits, the sys-

tem may not function properly.

Display: [995]

You say: [Seven, three, four]

Voice output: [734 push the off−hook

switch to dial. Otherwise, push the

talk switch and say dial, go back, or

delete.]

263

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Receiving a phone call

When receiving a phone call, a ring tone

is audible and the system changes into

the telephone mode.

Display: [995734]

Cancel operation—

Repeat the above procedure until the

entire number that you want to dial is

input.

Do either one of the following:

D Push the on−hook switch at anytime

during the operation.

When receiving a phone call, the display

is as follows. The display differs depend-

ing on whether or not the vehicle is in

motion.

Go back operation—

You say: [Go back]

D Push the talk switch and say [Can-

cel] after the beep at anytime dur-

ing the operation except while a call

is connected.

When the vehicle is stopped:

Number, name, or [Incoming] is displayed.

Voice output: [Go back, the last num-

bers entered have been removed.

Push the talk switch and continue

adding numbers otherwise say dial,

go back, or delete.]

When the vehicle is in motion:

[Incoming] is displayed.

Do either one of the following:

Display: [995]

D Pushing the off−hook switch allows you

Repeating the above operation deletes

the last digits in reverse order of in-

put.

to talk on the phone.

D Pushing the on−hook switch refuses

the call.

Delete operation—

You say: [Delete]

To adjust the ring volume, push “+” or “−”

on the steering volume controls. Volume

adjustment cannot be done using the au-

dio system.

Voice output: [Deleted. The entire

number to dial has been deleted.

Please push the talk switch and say

the number.]

Repeatedly pushing “−” on the steering

volume controls mutes the ring.

Display: [Dial by Num]

When receiving an international phone

call, the name of the party may not be

displayed correctly depending on the cellu-

lar phone.

The display will return to the initial

screen that allows a number to be

input.

264

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

—Talking on the phone

To transfer a call to the phone:

While talking on the phone, the display is

as follows. The display differs depending

on whether or not the vehicle is in motion.

To transfer a call from the phone:

The received call can be transferred from

the hands−free system to the cellular

phone that is connected to Bluetoothr. For

details, refer to the user’s guide for the

cellular phone.

Pushing the off−hook switch while talking

on the cellular phone that is connected to

Bluetoothr allows you to talk hands−free.

When the vehicle is stopped:

Number is displayed.

A call can also be transferred by pushing

the talk switch and say [Call transfer].

When the vehicle is in motion:

[Talking] is displayed.

To transfer a call to the phone:

When the call is finished, push the on−

hook switch.

The call can be transferred from the

hands−free system to the phone that is

connected to Bluetoothr. For details, refer

to the user’s guide for the cellular phone.

In the following situations, your voice may

not reach the party.

D Talk alternately with the other party on

the phone. If you talk at the same

time, the voice may not reach each

other. (It is not a malfunction.)

D Keep the volume of receiving voice

down. Otherwise, echo is coming up.

When you talk on the phone, speak

clearly towards the microphone.

D When driving on a rough road.

D When driving at high speeds.

D When the window is open.

D When the air conditioning vents face

the microphone.

D When the sound of the air conditioning

fan is loud.

The microphone can be muted by pushing

the talk switch and say [Mute].

265

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

’07 Rav4_U (L/O 0701)

266

2007 RAV4 from Dec. ’06 Prod. (OM42662U)

Audio and hands-free phone systems for Your Toyota Rav4 SUV Third Generation (2006-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals