’07 Rav4_U (L/O 0701)
Power windows
OPERATING THE DRIVER’S WINDOW
Use the switch on the driver’s door.
If the power window does not operate
automatically or the jam protection
function does not operate correctly, you
should normalize the power window.
Normal operation: The window moves as
long as you hold the switch.
To normalize the power window:
To open: Lightly push down the switch.
To close: Lightly pull up the switch.
1. Push down the power window switch
and lower the windows fully.
Automatic operation: Push the switch
completely down or pull it completely up,
and then release it. The window will fully
open or close. To stop the window part-
way, lightly move the switch in the oppo-
site direction and then release it.
2. Pull up the switch until the windows
close and hold the switch for a second.
Make sure that the window open and
close automatically. If the power windows
cannot be operated properly, have it
checked by your Toyota dealer.
Jam protection function: During automat-
ic closing operation, the window stops and
opens half way if something gets caught
between the window and window frame.
The windows can be operated with the
switch on each door. The passengers’
windows can also be controlled by the
switches on the driver’s door.
CAUTION
D Never try jamming any part of your
body to activate the jam protection
function intentionally, as it could re-
sult in a death or serious injury.
If the window receives a strong impact,
this function may work even if nothing is
caught.
The power windows work when the ignition
switch is in the “ON” position.
Key off operation: If the either front door
is closed, they work for 45 seconds even
after the ignition switch is turned off. They
stop working when the either front door is
opened.
D The jam protection function may
not work if something gets caught
just before the window is fully
closed.
25
2007 RAV4 from Dec. ’06 Prod. (OM42662U)