Occupant restraint systems -> Flattening seatbacks for Your Toyota Rav4 SUV Third Generation (2006-2012)

’07 Rav4_U (L/O 0701)  
Flattening seatbacks  
(manual seat)  
When returning seats to their original  
position, observe the following pre-  
cautions in order to prevent death or  
serious injury in a collision or sud-  
den stop:  
CAUTION  
When stowing or returning the seat,  
observe the following precautions in  
order to prevent death or serious in-  
jury:  
D Make sure the seat is securely  
locked by pushing forward and rear-  
ward on the top of the seatback or  
by trying to pull up the edge of the  
bottom cushion. Failure to do so  
will prevent the seat belt from oper-  
ating properly.  
D Make sure the seat is free of people  
or luggage. Then, hold the seat and  
slowly move it. Otherwise, people  
may be injured or luggage may be  
damaged if the seat hits them.  
D Be careful not to get your hands or  
feet pinched in the seat.  
D Make sure the seat belts are not  
twisted or caught in the seatback  
and are arranged in their proper  
position and are ready to use.  
1. Hold the center of the lever and pull  
it up. Then slide the rear/second  
seats fully backward and pull it for-  
ward slightly until it locks.  
D Do not stow and return the seats  
when you are inside the vehicle in  
order to prevent pinching your  
hands or feet in the seat. Be sure  
to stow and return the seats from  
outside the vehicle.  
48  
2007 RAV4 from Dec. ’06 Prod. (OM42662U)  
’07 Rav4_U (L/O 0701)  
CAUTION  
D Do not allow passengers to ride on  
the flattened seat while driving; use  
the seat in the normal position.  
D After returning the seat to its origi-  
nal position, try pushing the seat  
and seatback forward and rearward  
to make sure it is secured in place.  
Be certain to replace head restraint.  
2. Remove the front head restraint.  
Hold the center of the lever and pull  
it up. Then slide the front seat fur-  
ther forward than the front−most  
lock position.  
3. Pull the seatback angle adjusting le-  
ver up to unlock and push down the  
seatback.  
When returning the seatback to the up-  
right position, be careful not to make  
yourself hit by the seatback which will  
bound with considerable spring force.  
After returning the seat to its original  
position, be certain to replace the head  
restraint.  
49  
2007 RAV4 from Dec. ’06 Prod. (OM42662U)  
’07 Rav4_U (L/O 0701)  
—Flattening seatbacks  
(power seat)  
1. Hold the center of the lever and pull  
it up. Then slide the rear/second  
seats fully backward and pull it for-  
ward slightly until it locks.  
2. Remove the front head restraint.  
3. Move the seatback angle adjusting  
switch backward to flatten the seat-  
back.  
Push the seat position adjusting  
switch forward to slide the seat to  
the front−most position.  
After returning the seat to its original  
position, be certain to replace the head  
restraint.  
50  
2007 RAV4 from Dec. ’06 Prod. (OM42662U)  
’07 Rav4_U (L/O 0701)  
Armrest  
Head restraints  
CAUTION  
D Do not allow passengers to ride on  
the flattened seat while driving; use  
the seat in the normal position.  
D After putting back the seat, try  
pushing the seat and seatback for-  
ward and rearward to make sure it  
is secured in place. Be certain to  
replace the head restraint.  
Front seats  
To use the armrest, lower the center  
head restraint. Pull the strap and pull  
the armrest down.  
NOTICE  
To prevent damage to the armrest,  
avoid putting heavy loads on it.  
Rear/second seats  
51  
2007 RAV4 from Dec. ’06 Prod. (OM42662U)