QUICK REFERENCE -> In transit for Your Toyota Supra 2 Door Fifth Generation (2020-2025)

26  
In transit  
2-1. QUICK REFERENCE  
Parking brake  
Setting  
Driving  
Pull the switch.  
Drive-ready state  
The LED on the switch  
and the indicator light in  
the instrument cluster  
are illuminated.  
Switching on drive-ready  
state  
Releasing  
With drive-ready state  
switched on:  
Press the switch while  
the brake is pressed or  
selector lever position  
P is set.  
1 Depress the brake pedal.  
2 Press the Start/Stop button.  
Switching off drive-ready  
state  
The LED and indicator light go  
out.  
1 Engage selector lever posi-  
tion P with the vehicle  
stopped.  
The parking brake is released.  
Automatic transmission  
2 Press the Start/Stop button.  
The engine is switched off.  
Engaging selector lever  
position D, N, R  
3 Set the parking brake.  
Auto Start/Stop function  
The Auto Start/Stop function  
switches the engine off automat-  
ically while stationary to save  
fuel. The engine starts automati-  
cally under the following precon-  
ditions:  
• By releasing the brake pedal.  
• Drive mode D.  
• Neutral N.  
• Reverse R.  
Supra Owner's Manual_U (from Jul. '20 Prod.)  
27  
2-1. QUICK REFERENCE  
With the driver's safety belt fas-  
tened, briefly push the selector  
lever in the desired direction,  
past a resistance point, if  
needed. The selector lever  
returns to the center position in  
each case.  
To prevent the vehicle from  
creeping after you select a drive  
mode or reverse, maintain pres-  
sure on the brake pedal until  
you are ready to start.  
Press button P.  
2
Automatic transmission,  
manual mode  
A selector lever lock prevents  
the inadvertent shifting to selec-  
tor lever position R or the inad-  
vertent shifting from selector  
lever position P.  
Engage selector lever position R  
only when the vehicle is station-  
ary.  
Activate the manual mode:  
Releasing the selector lever  
lock  
Press the selector lever to the  
left from selector lever position  
D.  
Manual mode:  
To shift down: press the  
selector lever forward.  
To shift up: pull the selector  
lever rearwards.  
End the manual mode:  
Push the selector lever to the  
right.  
Press the button.  
Engaging P  
Engage selector lever position P  
only when the vehicle is station-  
ary.  
Supra Owner's Manual_U (from Jul. '20 Prod.)  
28  
2-1. QUICK REFERENCE  
3 Lane change to the left  
(movethe lever partway and  
release it)  
High beams, headlight  
flasher, turn signal  
The left hand signals will flash 3  
times.  
High beams, headlight  
flasher  
4 Left turn  
Lights and lighting  
Light functions  
Symbol  
Function  
Lights off.  
Daytime running lights.  
Push the lever forward or pull it  
backward.  
• High beams on, arrow 1. The  
high beams light up when the  
low beams are switched on.  
• High beams off/headlight  
flasher, arrow 2.  
Parking lights.  
Automatic headlight  
control.  
Turn signal  
Low beams.  
1
2
Instrument lighting.  
Right roadside parking  
light.  
3
4
Left roadside parking  
light.  
1 Right turn  
2 Lane change to the right  
(movethe lever partway and  
release it)  
Washer/wiper system  
The wipers can be operated in  
the standby state.  
The right hand signals will flash 3  
times.  
Supra Owner's Manual_U (from Jul. '20 Prod.)  
29  
2-1. QUICK REFERENCE  
Switching the wipers on/off  
and brief wipe  
Rain sensor  
Activating/deactivating  
Switching on  
2
To activate: press the lever up  
Press the lever up until the  
desired position is reached.  
• Resting position of the wipers:  
position 0.  
once from its standard position,  
arrow 1.  
To deactivate: press the lever  
back into the standard position.  
• Rain sensor: position 1.  
• Normal wiper speed: position  
2.  
Adjusting the sensitivity  
• Fast wiper speed: position 3.  
Brief wipe and switching off  
Turn the thumbwheel on the  
wiper lever.  
Cleaning the windshield  
Press the lever down.  
• Switching off: press the lever  
down until it reaches its stan-  
dard position (position 0).  
• Brief wipe: press the lever  
down from the standard posi-  
tion (position 0).  
Supra Owner's Manual_U (from Jul. '20 Prod.)  
30  
2-1. QUICK REFERENCE  
Pull the wiper lever towards you.  
Button  
Function  
Climate control  
Seat heating.  
Button  
Function  
Climate control opera-  
tion.  
Temperature.  
Air flow, manual.  
Recirculated-air mode.  
Maximum cooling.  
Refueling  
Refueling  
Fuel cap  
1 Press the rear edge of the  
AUTO program.  
fuel filler flap to open it.  
Air distribution, manual.  
Switching off.  
2 Turn the fuel cap counter-  
Defrost and defog the  
windshield.  
clockwise.  
3 Place the fuel cap in the  
bracket attached to the fuel  
filler flap.  
Rear window defroster.  
Gasoline  
For the best fuel efficiency, the  
Supra Owner's Manual_U (from Jul. '20 Prod.)  
31  
2-1. QUICK REFERENCE  
Cleaning the wheels  
gasoline should be sulfur-free or  
very low in sulfur content.  
The friction during hard braking  
may produce brake dust and  
make the rims dirty. Brake dust  
can be removed by cleaning the  
rims. Toyota recommends using  
vehicle care and cleaning prod-  
ucts from Toyota.  
Fuels that are marked on the  
gas pump as containing metal  
must not be used. P.293  
Wheels and tires  
Tire inflation pressure speci-  
fications  
2
Electronic oil measure-  
ment  
The tire inflation pressure speci-  
fications can be found in the tire  
inflation pressure table in the  
printed Owner's Manual.  
Functional requirements  
Depending on the previous dis-  
plays, the status display  
appears when the engine is run-  
ning or after the vehicle has  
been driven for at least 30 min-  
utes.  
After correcting the tire infla-  
tion pressure  
With Tire Pressure Monitor  
TPM:  
The corrected tire inflation pres-  
sures are applied automatically.  
Make sure that the correct tire  
settings have been made.  
Displaying the engine oil  
level  
Via Toyota Supra Command:  
With tires that cannot be found  
in the tire pressure values on  
the Control Display, reset the  
Tire Pressure Monitor TPM.  
1 "My Vehicle"  
2 "Vehicle status"  
3
"Engine oil level"  
Different messages appear on  
the Control Display depending  
on the engine oil level. Pay  
attention to these messages.  
Checking the tire inflation  
pressure  
Regularly check the tire inflation  
pressure and correct it as  
needed:  
Adding engine oil  
• At least twice a month.  
• Before embarking on an  
extended trip.  
General information  
Safely park the vehicle and  
Supra Owner's Manual_U (from Jul. '20 Prod.)  
32  
2-1. QUICK REFERENCE  
switch off drive-ready state  
before adding engine oil.  
Roadside assistance  
Via Toyota Supra Command:  
1 "Toyota Supra Connect"  
Adding  
2 "Toyota Supra Assistance"  
3 "Roadside assistance"  
A voice connection is established.  
Toyota Supra Connect  
Concierge  
The Concierge offers informa-  
tion on events, gas stations or  
hotels, and provides phone  
numbers and addresses. Many  
hotels can be booked directly by  
the Concierge.  
Only add engine oil when the  
message is displayed in the  
instrument cluster.  
Observe the quantity to be  
added in the message.  
Take care not to add too much  
engine oil.  
Via Toyota Supra Command:  
1 "Toyota Supra Connect"  
2 "Toyota Supra Assistance"  
3 "Concierge"  
Observe recommended engine  
oil types, see page 297.  
A voice connection to the Con-  
cierge is established.  
Providing assistance  
Hazard warning flashers  
Remote maintenance  
Remote maintenance are ser-  
vices that help to maintain vehi-  
cle mobility.  
Remote maintenance can com-  
prise the following services:  
• Roadside assistance.  
• Battery guard.  
The button is located in the cen-  
ter console.  
Supra Owner's Manual_U (from Jul. '20 Prod.)  
33  
2-1. QUICK REFERENCE  
When taking a nap in the vehicle  
After driving  
When parking  
is unavoidable, park the vehicle in  
a safe place, turn the engine  
switch off, and if possible, sleep in  
the passenger seat. If the engine  
is left running, the accelerator  
pedal may be depressed or selec-  
tor lever may be operated unin-  
tentionally, possibly leading to an  
accident. Also, if the engine is run  
at a high speed for a long time,  
the exhaust system and engine  
may become extremely hot, pos-  
sibly causing to a fire.  
When leaving the vehicle, turn  
the engine switch off, apply the  
parking brake and lock the  
doors.  
2
WARNING  
Be careful when parking, as to not  
park the vehicle near flammable  
materials.  
When parking, stop the vehicle  
in a safe and appropriate park-  
ing area, operate the “P” (park-  
ing) switch on the selector lever  
and turn the engine switch off.  
WARNING  
Do not park the vehicle near flam-  
mable materials, such as dry  
grass, leaves, paper, oil, etc. If  
these kinds of material touch a  
part of the exhaust system, it may  
cause a fire.  
When taking a nap in the vehicle,  
make sure to turn the engine  
switch off.  
Supra Owner's Manual_U (from Jul. '20 Prod.)  
34  
2-1. QUICK REFERENCE  
Supra Owner's Manual_U (from Jul. '20 Prod.)