INFORMATION BEFORE DRIVING YOUR TOYOTA -> Tire information for Your Toyota Yaris 4 Door Second Generation (2006-2011)

2-1. Driving procedures  
Parking brake  
Set the parking brake  
Fully set the parking brake  
while depressing the brake  
pedal.  
At this time, the indicator will  
come on.  
Except  
Canada  
Canada  
Release the parking brake  
Slightly raise the lever  
Press the button  
Lower it completely  
116  
2-1. Driving procedures  
NOTICE  
Before driving  
Fully release the parking brake.  
Driving the vehicle with the parking brake set will lead to brake components  
overheating, which may affect braking performance and increase brake  
wear.  
Parking brake engaged warning buzzer (P. 292)  
2
117  
2-2. Instrument cluster  
Gauges and meters  
Vehicles with tachometer  
The following gauges, meters  
and displays illuminate when  
the engine switch is in the ON  
position.  
Tachometer  
Displays the engine speed in  
revolutions per minute.  
Speedometer  
Displays the vehicle speed.  
Fuel gauge  
Displays the quantity of fuel  
remaining in the tank.  
Clock  
Indicates the time.  
118  
2-2. Instrument cluster  
Odometer/trip meter  
Odometer:  
Displays the total distance the vehicle has been driven.  
Trip meter:  
Displays the distance the vehicle has been driven since the meter was  
last reset. Trip meters A and B can be used to record and display differ-  
ent distances independently.  
ODO/TRIP button  
2
Switches between odometer and trip meter displays. Pushing and hold-  
ing the button will reset the trip meter when the trip meter is being dis-  
played.  
CLOCK button  
Adjusts the time.(P. 201)  
119  
2-2. Instrument cluster  
Vehicles without tachometer  
Speedometer  
Displays the vehicle speed.  
Fuel gauge  
Displays the quantity of fuel  
remaining in the tank.  
Clock  
Indicates the time.  
Odometer/trip meter  
Odometer:  
Displays the total distance the  
vehicle has been driven.  
Trip meter:  
Displays the distance the vehi-  
cle has been driven since the  
meter was last reset. Trip  
meters A and B can be used to  
record and display different  
distances independently.  
120  
2-2. Instrument cluster  
ODO/TRIP button  
Switches between odometer and trip meter displays. Pushing and hold-  
ing the button will reset the trip meter when the trip meter is being dis-  
played.  
CLOCK button  
Adjusts the time. (P. 201)  
2
Odometer and trip meter display button  
Pressing this button switches between odometer and trip meter dis-  
plays.  
Odometer  
*
Trip meter A  
*
Trip meter B  
*:Pushing and holding the button  
will reset the trip meter.  
Instrument panel light control  
The brightness of the instrument panel lights can be adjusted.  
Brighter  
Darker  
If the dial is turned up until a click  
is heard, the tachometer and  
speedometer will no longer be  
illuminated when the tail lights/  
head lights are turned on.  
121  
2-2. Instrument cluster  
NOTICE  
To prevent damage to the engine and its components  
Do not let the indicator needle of the tachometer enter the red zone, which  
indicates the maximum engine speed.  
The engine may be overheating if the high engine coolant temperature  
warning light comes on. In this case, immediately stop the vehicle in a safe  
place, and check the engine after it has cooled completely. (P. 320)  
122  
2-2. Instrument cluster  
Indicators and warning lights  
The indicator and warning lights on the instrument cluster and cen-  
ter panel inform the driver of the status of the vehicle’s various sys-  
tems.  
Instrument cluster (vehicles with tachometer)  
2
Instrument cluster (vehicles without tachometer)  
123  
2-2. Instrument cluster  
Center panel  
124  
2-2. Instrument cluster  
Indicators  
The indicators inform the driver of the operating state of the  
vehicle’s various systems.  
Low engine coolant  
temperature indicator  
Turn signal indicator  
(P. 115)  
Indicates the engine  
coolant temperature is  
cool.  
Headlight high beam  
indicator (P. 127)  
2
Headlight indicator  
(P. 127)  
Cruise control indicator  
(P. 132)  
(except  
Canada)  
(if equipped)  
Tail light indicator  
(P. 127)  
AIR BAG ON indicator  
(P. 78)  
(Canada)  
Front fog light indicator  
(P. 129)  
AIR BAG OFF indicator  
(P. 78)  
(if equipped)  
(Automatic transmission vehicles  
with tachometer)  
Shift position and shift range indica-  
tors (P. 112)  
(Automatic transmission vehicles  
without tachometer)  
Shift position and shift range indica-  
tors (P. 112)  
125  
2-2. Instrument cluster  
Warning lights  
Warning lights inform the driver of malfunctions in any of the  
vehicle’s systems. (P. 292)  
*
*
*
(Canada)  
*
*
*
*
*
*
*
(except  
Canada)  
(Canada  
-if equipped)  
(except  
Canada  
-if equipped)  
(except  
Canada)  
(Canada)  
*
*
(if equipped)  
(except  
Canada)  
*
(vehicles  
without  
(vehicles  
with tachom-  
(except  
Canada)  
tachometer) eter)  
*: These lights turn on when the engine switch is turned to the ON  
position to indicate that a system check is being performed. They will  
turn off after the engine is started, or after a few seconds. There may  
be a malfunction in a system if a light does not come on, or if the  
lights do not turn off. Have the vehicle inspected by your Toyota  
dealer.  
CAUTION  
If a safety system warning light does not come on  
Should a safety system light such as ABS and the SRS airbag warning light  
not come on when you start the engine, this could mean that these systems  
are not available to help protect you in an accident, which could result in  
death or serious injury. Have the vehicle inspected by your Toyota dealer  
immediately if this occurs.  
126