STARTING AND DRIVING for Your Toyota Yaris 4 Door Second Generation (2006-2011)

2-4. Using other driving systems  
Canceling and resuming regular acceleration  
Cancel  
Push the lever towards you to  
cancel cruise control.  
The speed setting is also can-  
celed when the brakes are  
applied  
or  
the  
clutch  
2
depressed (manual transmis-  
sion).  
Resume  
To resume cruise control and  
return to the set speed, push  
the lever up.  
Cruise control can be set when  
The shift lever is in D or 3 (vehicles with an automatic transmission).  
Vehicle speed is above approximately 25 mph (40 km/h).  
Accelerating  
The vehicle can be accelerated normally.  
Automatic cruise control cancelation  
The set speed is automatically cancelled in any of the following situations.  
Actual vehicle speed falls more than 10 mph (16 km/h) below the preset  
vehicle speed.  
At this time, the memorized set speed is not retained.  
Actual vehicle speed is below 25 mph (40 km/h).  
If the cruise control indicator light flashes  
Press the ON-OFF button to turn the cruise control off, and then reactivate  
the system.  
If the cruise control speed cannot be set or if the cruise control cancels  
immediately after being activated, there may be a malfunction in the cruise  
control system. Have the vehicle inspected by your Toyota dealer.  
133  
2-4. Using other driving systems  
CAUTION  
To avoid operating the cruise control by mistake  
Keep the ON-OFF button off when not in use.  
Situations unsuitable for cruise control  
Do not use cruise control in any of the following situations.  
Doing so may result in control of the vehicle being lost and could cause seri-  
ous or fatal accident.  
In heavy traffic  
On roads with sharp bends  
On winding roads  
On slippery roads, such as those covered with rain, ice or snow  
On steep hills  
While driving with the cruise control on  
Vehicles with a manual transmission, do not shift to neutral without depress-  
ing the clutch pedal, as this may cause engine racing or overrevving.  
134  
2-4. Using other driving systems  
Driving assist systems  
To help enhance driving safety and performance, the following sys-  
tems operate automatically in response to various driving situations.  
Be aware, however, that these systems are supplementary and  
should not be relied upon too heavily when operating the vehicle.  
ABS (Anti-lock Brake System) (if equipped)  
Helps to prevent wheel lock when the brakes are applied suddenly, or if  
the brakes are applied while driving on a slippery road surface.  
2
EPS (Electric Power Steering)  
Employs an electric motor to reduce the amount of effort needed to turn  
the steering wheel.  
Sounds and vibrations caused by the ABS  
A sound may be heard from the engine compartment when the engine is  
started or just after the vehicle begins to move. This sound does not indi-  
cate that a malfunction has occurred in this system.  
Any of the following conditions may occur when the above systems are  
operating. None of these indicates that a malfunction has occurred.  
• Vibrations may be felt through the vehicle body and steering.  
• A motor sound may be heard after the vehicle comes to a stop.  
• The brake pedal may pulsate slightly after the ABS is activated.  
• The brake pedal may move down slightly after the ABS is activated.  
EPS operation sound  
When the steering wheel operates, a motor sound (whirring sound) may be  
heard.  
This does not indicate a malfunction.  
Reduced effectiveness of EPS  
The effectiveness of EPS is reduced to prevent the system from overheating  
when there is frequent steering input over an extended period of time. The  
steering wheel may feel heavy as a result. Should this occur, refrain from  
excessive steering input or stop the vehicle and turn the engine off. The sys-  
tem should return to normal within 10 minutes.  
135  
2-4. Using other driving systems  
CAUTION  
The ABS does not operate effectively when  
Tires with inadequate gripping ability are used (such as excessively worn  
tires on a snow covered road).  
The vehicle hydroplanes while driving at high speed on the wet or slick  
road.  
Stopping distance when the ABS is operating on the wet or slick roads  
The ABS is not designed to shorten the vehicle's stopping distance. Always  
maintain a safe distance from the vehicle in front of you in the following situ-  
ations.  
When driving on dirt, gravel or snow-covered roads  
When driving with tire chains  
When driving over bumps in the road  
When driving over roads with potholes or uneven roads  
Replacing tires  
Make sure that all tires are of the same size, brand, tread pattern and total  
load capacity. In addition, make sure that the tires are inflated to the appro-  
priate tire pressure level.  
The ABS will not function correctly if different tires are fitted on the vehicle.  
Contact your Toyota dealer for further information when replacing tires or  
wheels.  
Handling of tires and suspension  
Using tires with any kind of problem or modifying the suspension will affect  
the driving assist systems, and may cause the system to malfunction.  
136  
2-5. Driving information  
Cargo and luggage  
Take notice of the following information about storage precau-  
tions, cargo capacity and load.  
Stow cargo and luggage in the trunk whenever possible.  
Be sure all items are secured in place.  
Be careful to keep the vehicle level. Placing the weight as far for-  
ward as possible helps maintain vehicle balance.  
2
For better fuel economy, do not carry unnecessary weight.  
Capacity and distribution  
Cargo capacity depends on the total weight of the occupants.  
(Cargo capacity) = (Total load capacity) (Total weight of occupants)  
Steps for Determining Correct Load Limit—  
(1)Locate the statement “The combined weight of occupants and  
cargo should never exceed XXX kg or XXX lbs.” on your vehicle’s  
placard.  
(2)Determine the combined weight of the driver and passengers that  
will be riding in your vehicle.  
(3)Subtract the combined weight of the driver and passengers from  
XXX kg or XXX lbs.  
(4)The resulting figure equals the available amount of cargo and lug-  
gage load capacity.  
For example, if the “XXX” amount equals 1400 lbs. and there will  
be five 150 lb passengers in your vehicle, the amount of available  
cargo and luggage load capacity is 650 lbs. (1400 750 (5 150)  
= 650 lbs.)  
(5)Determine the combined weight of luggage and cargo being  
loaded on the vehicle. That weight may not safely exceed the  
available cargo and luggage load capacity calculated in Step 4.  
137  
2-5. Driving information  
(6)If your vehicle will be towing a trailer, load from your trailer will be  
transferred to your vehicle. Consult this manual to determine how  
this reduces the available cargo and luggage load capacity of your  
vehicle.  
Except Canada:  
Toyota does not recommend towing a trailer with your vehicle. Your  
vehicle is not designed for trailer towing.  
Example on your vehicle  
Cargo capacity  
Total load capacity  
When 2 people with the combined weight of 366 lb. (166 kg) are  
riding in your vehicle, which has a total load capacity of 845 lb. (383  
kg), the available amount of cargo and luggage load capacity will be  
as follows:  
845 lb. 366 lb. = 479 lb. (383 kg 166 kg = 217 kg)  
In this condition, if 3 more passengers with the combined weight of  
388 lb. (176 kg) get on, the available cargo and luggage load will be  
reduced as follows:  
479 lb. 388 lb. = 91 lb. (217 kg 176 kg = 41 kg)  
As shown in the above example, if the number of occupants  
increases, the cargo and luggage load will be reduced by an amount  
that equals the increased weight due to the additional occupants. In  
other words, if an increase in the number of occupants causes an  
excess of the total load capacity (combined weight of occupants plus  
cargo and luggage load), you must reduce the cargo and luggage on  
your vehicle.  
138  
2-5. Driving information  
CAUTION  
Things that must not be carried in the trunk  
The following things may cause a fire if loaded in the trunk.  
Receptacles containing gasoline  
Aerosol cans  
Storage precautions  
Do not place anything on the package tray behind the rear seatback.  
Such items may be thrown about and possibly injure people in the  
vehicle during sudden braking or in an accident.  
2
Do not drive with objects on top of the instrument panel.  
They may interfere with the driver’s field of view or move during sharp  
acceleration or turning, thus impairing the driver’s control of the vehi-  
cle. In an accident they may injure the vehicle occupants.  
Secure all items in the occupant compartment, as they may shift and  
injure someone during an accident or sudden braking.  
Capacity and distribution  
Do not exceed the maximum axle weight rating or the total vehicle  
weight rating.  
Even if the total load of occupant’s weight and the cargo load is less  
than the total load capacity, do not apply the load unevenly. Improper  
loading may cause deterioration of steering or braking control which  
may cause death or serious injury.  
139  
2-5. Driving information  
Vehicle load limits  
Vehicle load limits include total load capacity, seating capacity,  
towing capacity and cargo capacity.  
Total load capacity: 845 lb. (383 kg)  
Total load capacity means the combined weight of occupants,  
cargo and luggage.  
Seating capacity: 5 occupants (Front 2, Rear 3)  
Seating capacity means the maximum number of occupants  
whose estimated average weight is 150 lb. (68 kg) per person.  
Even if the number of occupants are within the seating capacity,  
do not exceed the total load capacity.  
Towing capacity (Canada): 700 lb. (318 kg)  
Towing capacity means the maximum gross trailer weight (trailer  
weight plus its cargo weight) that your vehicle is able to tow.  
Towing capacity (except Canada):  
Toyota does not recommend towing a trailer with your vehicle.  
Cargo capacity  
Cargo capacity may increase or decrease depending on the  
weight and the number of occupants.  
Total load capacity and seating capacity  
These details are also described on the tire and loading information  
label. (P. 246)  
CAUTION  
Overloading the vehicle  
Do not overload the vehicle.  
It may not only cause damage to the tires, but also degrade steering and  
braking ability, resulting in an accident.  
140  
2-5. Driving information  
Winter driving tips  
Carry out the necessary preparations and inspections before driving  
the vehicle in winter. Always drive the vehicle in a manner appropri-  
ate to the prevailing weather conditions.  
Pre-winter preparations  
Use fluids that are appropriate to the prevailing outside tem-  
peratures.  
• Engine oil  
2
• Engine coolant  
• Washer fluid  
Have a service technician inspect the level and specific grav-  
ity of battery electrolyte.  
Have the vehicle fitted with four snow tires or purchase a set  
of tire chains for the front tires.  
Ensure that all tires are the same size and brand, and that chains  
match the size of the tires.  
Before driving the vehicle  
Perform the following according to the driving conditions.  
Do not try to forcibly open a window, scrape an outside rear  
view mirror surface or move a wiper or outside rear view mir-  
ror that is frozen. Pour warm water over the frozen area to  
melt the ice. Wipe away the water immediately to prevent it  
from freezing.  
To ensure proper operation of the climate control system fan,  
remove any snow that has accumulated on the air inlet vents  
in front of the windshield.  
Remove any ice that has accumulated on the vehicle chassis.  
Periodically check for and remove any excess ice or snow  
that may have accumulated in the wheel well or on the  
brakes.  
141  
2-5. Driving information  
When driving the vehicle  
Accelerate the vehicle slowly and drive at a reduced speed suit-  
able to road conditions.  
When parking the vehicle  
Park the vehicle and move the shift lever to P (automatic trans-  
mission) or to 1 or R (manual transmission) without setting the  
parking brake. The parking brake may freeze up, preventing it  
from being released.  
Regulations on the use of snow chains  
Regulations regarding the use of tire chains vary according to loca-  
tion and type of road. Always check local regulations before install-  
ing chains.  
Use SAE Class “S” type radial tire chains, with the exception of  
radial cable chains or V-bar type chains.  
• Install the chains on the front tires.  
• Refer to the explanation that comes with the tire chains for  
installation instructions.  
Retighten the chains after driving 1/4 - 1/2 mile (0.5 - 1.0 km).  
Snow chain installation  
Observe the following precautions when installing and removing chains.  
Install and remove tire chains in a safe location.  
Install tire chains on the front tires only. Do not install tire chains on the  
rear tires.  
Install the tire chains on front tires as tightly as possible.  
Install tire chains following the instructions provided in the accompanying  
instructions.  
If wheel ornaments are used, they will be scratched by the chain band,  
so remove the ornaments before putting on the chains. (P. 305)  
142  
2-5. Driving information  
CAUTION  
Driving with snow tires  
Observe the following precautions to reduce the risk of accidents.  
Failing to do so may result in a loss of vehicle control and cause death or  
serious injury.  
Use tires of the size specified for your vehicle.  
Maintain the recommended level of air pressure.  
2
Do not drive in excess of 75 mph (120 km/h) regardless of the type of  
snow tires being used.  
Snow tires should be installed on all wheels.  
Driving with snow chains  
Observe the following precautions to reduce the risk of accidents.  
Failing to do so may result in the vehicle being unable to be driven safely,  
and may cause death or serious injury.  
Do not drive in excess of the speed limit specified for the tire chains being  
used or 30 mph (50 km/h), whichever is lower.  
Avoid driving on bumpy road surfaces or over potholes.  
Avoid sudden turns and braking.  
Slow down sufficiently before entering a curve to ensure that vehicle con-  
trol is maintained.  
NOTICE  
Repairing or replacing snow tires  
Request repairs of and obtain replacement snow tires from Toyota dealers or  
legitimate tire retailers.  
This is because the removal and attachment of snow tires affects the opera-  
tion of the tire pressure warning valves and transmitters.  
Fitting tire chains  
The tire pressure warning valves and transmitters may not function correctly  
when tire chains are fitted.  
143  
2-5. Driving information  
Trailer towing (except Canada)  
Toyota does not recommend towing a trailer with your vehicle. Toy-  
ota also does not recommend the installation of a tow hitch or the  
use of a tow hitch carrier of a wheelchair, scooter, bicycle, etc. Your  
Toyota is not designed for trailer towing or for the use of tow hitch  
mounted carriers.  
144  
2-5. Driving information  
Trailer towing (Canada)  
Your vehicle is designed primarily as a passenger-carrying vehicle,  
thus towing a trailer will have an adverse effect on handling, perfor-  
mance, braking, durability, and fuel consumption. For your safety  
and the safety of others, do not overload the vehicle or trailer.  
Toyota warranties do not apply to damage or malfunction caused by  
towing a trailer for commercial purposes.  
Weight limits  
2
Confirm the total trailer weight, gross vehicle weight, gross axle  
weight and trailer tongue load are all within the limits.  
Gross vehicle weight  
The gross vehicle weight must not exceed the Gross Vehicle  
Weight Rating (GVWR) indicated on the Certification Label. The  
gross vehicle weight is the sum of weights of the unloaded vehi-  
cle, driver, passengers, luggage, hitch, and the trailer tongue  
load. It also includes the weight of any special equipment  
installed on your vehicle.  
Gross axle weight  
The load on either the front or rear axle resulting from distribu-  
tion of the gross vehicle weight on both axles must not exceed  
the Gross Axle Weight Rating (GAWR) listed on the Certification  
Label.  
Certification label  
145  
2-5. Driving information  
Trailer tongue load  
The trailer cargo load should be distributed so that the tongue  
load is 9 to 11% of the total trailer weight, not exceeding the  
maximum 70 lb. (32 kg) (Tongue load / Total trailer weight 100  
= 9 to 11%)  
The total trailer weight and tongue load can be measured with  
platform scales found at a highway weighing station, building  
supply company, trucking company, junk yard, etc.  
Total trailer weight  
Tongue load  
146