Instruments and controls -> Warning lights, gauges and indicators for Your Vauxhall Astra 4 Door Seventh Generation (2016-2021)

98  
Instruments and controls  
Touch 12-24 Hr on the right side of the  
screen to select a time mode.  
Do not damage the outlets by using  
unsuitable plugs.  
Power outlets  
If 12-hour mode is selected, a third  
column for AM and PM setting is  
displayed. Select the desired option.  
Stop-start system 3 156.  
USB port  
Set date  
Select Set Date to enter the  
respective submenu.  
Notice  
If date information is automatically  
provided, this menu item is not  
available.  
Select Auto Set at the bottom of the  
screen. Activate either On - RDS or  
Off - Manual.  
If Off - Manual is selected, adjust the  
date by touching n or o.  
A 12 V power outlet is located in the  
centre console. With ignition off, this  
power outlet is deactivated.  
Do not exceed the maximum power  
consumption of 120 W.  
Depending on the infotainment  
system, one or two USB ports for  
charging devices are located in  
between the front seats. These ports  
have also a data connection to the  
Infotainment system. For further  
information, see Infotainment  
manual.  
Electrical accessories that are  
connected must comply with the  
electromagnetic compatibility  
requirements laid down in  
DIN VDE 40 839.  
Do not connect any current-delivering  
accessories, e.g. electrical charging  
devices or batteries.  
Clock display  
Select Clock Display to enter the  
respective submenu.  
To turn off the digital clock display in  
the menus, select Off.  
Instruments and controls  
99  
USB charging port  
Inductive charging  
9 Warning  
Inductive charging can affect the  
operation of implanted  
pacemakers or other medical  
devices. If applicable, seek  
medical advice before using the  
inductive charging device.  
9 Warning  
To charge a device, the ignition must  
be switched on.  
The charging slot is located below the  
front armrest.  
Remove any metal objects from  
the charging device before  
charging a mobile device, as these  
objects could become very hot.  
Two USB ports for charging devices  
only are located in the back of the  
centre console.  
To charge a mobile device:  
Each socket provides 2.1 A at 5 V.  
1. Remove all objects from the  
charging slot otherwise the  
system may not charge.  
2. Insert the mobile device with the  
display facing to the rear in the  
charging slot. Charging status is  
indicated in the Info display 0 and  
shows if mobile device is properly  
positioned.  
Notice  
The sockets must always be kept  
clean and dry.  
100  
Instruments and controls  
If 0 is not displayed, remove mobile  
device from the slot. Turn mobile  
device 180 degrees and wait three  
seconds before inserting mobile  
device again.  
PMA, Qi and A4WP compatible  
mobile devices can be charged  
inductively.  
On some mobile devices, a back  
cover with an integrated coil or a  
jacket may be required to use  
inductive charging.  
The mobile device must be smaller  
than 8 cm in width and 15 cm in length  
to fit into the charging device.  
Warning lights, gauges  
and indicators  
Instrument cluster  
Depending on the version, two  
instrument clusters are available:  
Baselevel  
Uplevel  
Uplevel instrument cluster can be  
displayed as Sport mode or Tour  
mode.  
A portable ashtray can be placed in  
the cupholders.  
Baselevel instrument cluster  
Protective cover for the mobile device  
could have impact on the inductive  
charging.  
Ashtrays  
Caution  
To be used only for ash and not for  
combustible rubbish.  
Instruments and controls  
101  
Uplevel instrument cluster, Sport mode  
102  
Instruments and controls  
Uplevel instrument cluster, Touring mode  
Instruments and controls  
103  
Overview  
b
k
m
Electronic Stability Control and  
Cruise control 3 113 / Adaptive  
Traction Control system 3 110  
cruise control 3 113  
O Turn lights 3 107  
C
A
7
Traction Control system off  
3 111  
Adaptive cruise control 3 113  
Vehicle detected ahead 3 113  
X
v
Seat belt reminder 3 107  
Airbag and belt tensioners  
3 108  
W Engine coolant temperature  
3 111  
Pedestrian detected ahead  
3 113  
V
Airbag deactivation 3 108  
! Preheating 3 111  
L
L
h
Speed limiter 3 113  
Traffic sign assistant 3 114  
Door open 3 114  
p Charging system 3 109  
AdBlue 3 111  
ù
Z Malfunction indicator light  
3 109  
Tyre pressure monitoring  
system 3 111  
w
R Brake and clutch system 3 109  
I Engine oil pressure 3 111  
Speedometer  
m
j
Electric parking brake 3 109  
Y
Low fuel 3 112  
Electric parking brake fault  
3 109  
d
Immobiliser 3 112  
8 Exterior light 3 112  
u Antilock brake system (ABS)  
3 110  
High beam 3 112  
C
f
f
R
E
a
a
High beam assist 3 112  
LED headlights 3 112  
Gear shifting 3 110  
Following distance 3 110  
Lane keep assist 3 110  
> Front fog lights 3 113  
ø
Rear fog light 3 113  
Electronic Stability Control off  
3 110  
Indicates vehicle speed.  
104  
Instruments and controls  
Baselevel instrument cluster  
Uplevel instrument cluster  
Odometer  
Select ; on main menu. Choose  
page Trip 1 or Trip 2 by pressing P  
or N on the steering wheel.  
Select Info page on main menu.  
Choose page Trip A or Trip B by  
pressing P or N on the steering  
wheel.  
Each trip odometer can be reset  
separately when ignition is on: select  
respective page, press >. Confirm  
reset by pressing Å.  
The total recorded distance is  
displayed in miles.  
Each trip odometer can be reset  
separately when ignition is on: select  
respective page, press Å on the  
steering wheel. Confirm by choosing  
Yes: when the confirmation message  
is displayed.  
Trip odometer  
The recorded distance since the last  
reset is displayed on the trip computer  
page.  
Trip odometer counts up to  
9,999 miles and then restarts at 0.  
Two trip odometer pages are  
selectable for different trips.  
Instruments and controls  
105  
For bi-fuel engines: In petrol mode,  
the control indicator r illuminates  
before the needle reaches the red  
area.  
Tachometer  
Fuel gauge  
Refuel immediately if r flashes.  
Never run the fuel tank dry.  
Because of the fuel remaining in the  
tank, the top-up quantity may be less  
than the specified fuel tank capacity.  
Engine coolant temperature  
gauge  
Displays the engine speed.  
Drive in a low engine speed range for  
each gear as much as possible.  
Displays the fuel level or gas content  
(CNG) in the tank depending on the  
current operation mode.  
The arrow indicates the vehicle side  
where the fuel filler flap is located.  
Caution  
For bi-fuel engines, the Driver  
Information Centre displays the fuel  
level for the fuel type which is  
currently not in operation. The fuel  
level for the fuel type which is  
currently in operation is shown in the  
fuel gauge.  
If the needle is in the red warning  
zone, the maximum permitted  
engine speed is exceeded. Engine  
at risk.  
Displays the coolant temperature.  
Control indicator r illuminates if the  
fuel quantity is low.  
106  
Instruments and controls  
50  
: engine operating  
temperature not yet  
reached  
This can be an additional engine oil  
and filter change or part of a regular  
service.  
central  
area  
130  
: normal operating  
temperature  
: temperature too high  
Caution  
If engine coolant temperature is  
too high, stop vehicle, switch off  
engine. Danger to engine. Check  
coolant level.  
On Midlevel display select the  
Settings Menu by pressing MENU on  
the indicator lever. Turn the adjuster  
wheel to select the Remaining Oil  
Life page.  
Service display  
The engine oil life system informs  
when to change the engine oil and  
filter. Based on driving conditions, the  
interval at which an engine oil and  
filter change will be indicated can vary  
considerably.  
The remaining oil life duration menu  
is displayed in the Driver Information  
Centre 3 114.  
When the system has calculated that  
engine oil life has been diminished,  
Change Engine Oil Soon appears in  
the Driver Information Centre. Have  
engine oil and filter changed by a  
workshop within one week or  
300 miles, whichever occurs first.  
Instruments and controls  
Illuminates briefly  
107  
On Uplevel display select Info Menu  
by pressing p on steering wheel.  
Press P to select Remaining Oil  
Life page.  
Remaining oil life duration is indicated  
in percentage.  
carried out by a workshop within one  
week or 300 miles, whichever occurs  
first.  
The parking lights are switched on.  
Service information 3 270.  
Flashes  
The turn lights or the hazard warning  
flashers are activated.  
Rapid flashing: failure of the turn  
lights or associated fuse, failure of the  
turn lights on the trailer.  
Bulb replacement 3 229.  
Fuses 3 240.  
Turn lights 3 135.  
Control indicators  
The control indicators described are  
not present in all vehicles. The  
description applies to all instrument  
versions. Depending on the  
Reset  
On Midlevel display press SET/CLR  
on the indicator lever for several  
seconds to reset. The ignition must be  
switched on but engine not running.  
On Uplevel display press > on  
steering wheel to open the subfolder.  
Select Reset and confirm by pressing  
9 for several seconds. The ignition  
must be switched on but engine not  
running.  
equipment, the position of the control  
indicators may vary. When the  
ignition is switched on, most control  
indicators will illuminate briefly as a  
functionality test.  
Seat belt reminder  
Seat belt reminder on front seats  
X for driver's seat illuminates or  
flashes red in the instrument cluster.  
The control indicator colours mean:  
red  
: danger, important reminder  
yellow : warning, information, fault  
green : confirmation of activation  
blue : confirmation of activation  
white : confirmation of activation  
The system must be reset every time  
the engine oil is changed to allow  
proper functionality. Seek the  
assistance of a workshop.  
See all control indicators on different  
instrument clusters 3 100.  
Next service  
A message appears in the Driver  
Information Centre, when  
maintenance of the vehicle is  
required. Have maintenance work  
Turn lights  
O illuminates or flashes green.  
108  
Instruments and controls  
workshop. The airbags and belt  
pretensioners may fail to trigger in the  
event of an accident.  
Deployment of the belt pretensioners  
or airbags is indicated by continuous  
illumination of v.  
k for front passenger seat illuminates  
or flashes red in the roof console,  
when seat is occupied.  
Seat belt status on rear seats  
(vehicles with Uplevel display)  
X illuminates green or grey or flashes  
yellow in the Driver Information  
Centre, after having started the  
engine.  
Illuminates  
After the ignition has been switched  
on until the seat belt has been  
fastened.  
9 Warning  
Illuminates grey  
Seat belt is unfastened.  
Flashes  
Have the cause of the fault  
remedied immediately by a  
workshop.  
After having started the engine for a  
maximum of 100 seconds until the  
seat belt has been fastened.  
Illuminates green  
Seat belt has been fastened.  
Flashes yellow  
Belt pretensioners 3 57.  
Airbag system 3 59.  
Seat belt status on rear seats  
(vehicles with Midlevel display)  
Fastened seat belt has been  
unfastened.  
Fastening the seat belt 3 58.  
X illuminates or flashes white or grey  
in the Driver Information Centre, after  
having started the engine.  
Airbag deactivation  
Airbag and belt tensioners  
v illuminates red.  
Illuminates white  
Seat belt is unfastened.  
When the ignition is switched on, the  
control indicator illuminates for  
approx. 4 seconds. If it does not  
illuminate, does not go out after  
four seconds or illuminates whilst  
driving, there is a fault in the airbag  
system. Seek the assistance of a  
Illuminates grey  
Seat belt has been fastened.  
V illuminates yellow.  
The front passenger airbag is  
activated.  
Flashes white or grey  
Fastened seat belt has been  
unfastened.  
* illuminates yellow.  
Fastening the seat belt 3 58.  
Instruments and controls  
109  
The front passenger airbag is  
deactivated.  
Airbag deactivation 3 64.  
Illuminates when the engine is  
running  
Fault in the emission control system.  
The permitted emission limits may be  
exceeded.  
The cleaning process of the exhaust  
filter is potentially not possible.  
Seek the assistance of a workshop  
immediately.  
9 Warning  
Stop. Do not continue your  
journey. Consult a workshop.  
Charging system  
p illuminates red.  
Illuminates when the ignition is  
switched on and extinguishes shortly  
after the engine starts.  
Illuminates when the manual parking  
brake is applied and ignition is  
switched on 3 170.  
Electric parking brake  
Flashes when the engine is  
running  
Fault that could lead to catalytic  
converter damage. Ease up on the  
accelerator until the flashing stops.  
Seek the assistance of a workshop  
immediately.  
Illuminates when the engine is  
running  
m illuminates or flashes red.  
Illuminates  
Stop, switch off engine. Vehicle  
battery is not charging. Engine  
cooling may be interrupted. The  
brake servo unit may cease to be  
effective. Seek the assistance of a  
workshop.  
Electric parking brake is applied  
3 170.  
Flashes  
Electric parking brake is not fully  
applied or released. Depress the  
brake pedal and attempt to reset the  
system by first releasing then  
applying the electric parking brake. If  
m remains flashing, do not drive and  
seek the assistance of a workshop.  
Brake and clutch system  
R illuminates red.  
The brake and clutch fluid level is too  
low, when manual parking brake is  
not applied 3 226.  
Malfunction indicator light  
Z illuminates or flashes yellow.  
Illuminates when the ignition is  
switched on and extinguishes shortly  
after the engine starts.  
Electric parking brake fault  
j illuminates or flashes yellow.  
110  
Instruments and controls  
If the control indicator does not go out  
after a few seconds, or if it illuminates  
while driving, there is a fault in the  
ABS. The brake system remains  
operational but without ABS  
regulation.  
Illuminates  
Electric parking brake is operating  
with degraded performance 3 170.  
Illuminates green  
The system is switched on and ready  
to operate.  
Illuminates yellow  
The system approaches a detected  
lane marking without using the turn  
lights in that direction.  
Flashes  
Electric parking brake is in service  
mode. Stop vehicle, apply and  
release the electric parking brake to  
reset.  
Antilock brake system 3 169.  
Gear shifting  
Flashes yellow  
The system recognizes that the lane  
is departed significantly.  
R or S with the number of a higher or  
lower gear is indicated, when up- or  
downshifting is recommended for fuel  
saving reasons.  
9 Warning  
Have the cause of the fault  
remedied immediately by a  
workshop. Avoid parking on  
inclines until the cause of the fault  
has been remedied.  
Lane keep assist 3 209.  
Following distance  
Electronic Stability Control  
off  
E indicates the following distance  
setting of the alert timing sensitivity  
for the forward collision alert using  
filled distance bars.  
n illuminates yellow.  
The system is deactivated.  
Antilock brake system  
(ABS)  
u illuminates yellow.  
Illuminates for a few seconds after the  
ignition is switched on. The system is  
ready for operation when the control  
indicator extinguishes.  
Forward collision alert 3 186.  
Electronic Stability Control  
and Traction Control system  
b illuminates or flashes yellow.  
Lane keep assist  
a illuminates green or yellow, or  
flashes yellow.  
Instruments and controls  
111  
AdBlue 3 162.  
Illuminates  
Illuminates when the engine is  
running  
Stop, switch off engine.  
A fault in the system is present.  
Continued driving is possible. Driving  
stability, however, may deteriorate  
depending on road surface  
conditions.  
Tyre pressure monitoring  
system  
w illuminates or flashes yellow.  
Caution  
Coolant temperature too high.  
Have the cause of the fault remedied  
Illuminates  
Tyre pressure loss. Stop immediately  
and check tyre pressure.  
by a workshop.  
Check coolant level immediately  
3 225.  
Flashes  
If there is sufficient coolant, consult a  
workshop.  
The system is actively engaged.  
Engine output may be reduced and  
the vehicle may be braked  
Flashes  
Fault in system or tyre without  
pressure sensor mounted (e.g. spare  
wheel). After 60 to 90 seconds the  
control indicator illuminates  
automatically to a small degree.  
Preheating  
! illuminates yellow.  
Preheating of Diesel engine is  
activated. Only activates when  
outside temperature is low. Start the  
engine when control indicator  
extinguishes.  
Electronic Stability Control 3 173.  
Traction Control system 3 172.  
continuously. Consult a workshop.  
Engine oil pressure  
I illuminates red.  
Illuminates when the ignition is  
switched on and extinguishes shortly  
after the engine starts.  
Traction Control system off  
k illuminates yellow.  
The system is deactivated.  
AdBlue  
Engine coolant temperature  
W illuminates red.  
Y flashes yellow.  
AdBlue level is low. Refill AdBlue  
soon to avoid prevention of the  
engine start.  
112  
Instruments and controls  
Keep engine turned off and let the  
vehicle be towed to a workshop  
3 224.  
The exterior lights are on 3 129.  
Illuminates when the engine is  
running  
High beam  
C illuminates blue.  
Illuminated when high beam is on or  
during headlight flash 3 132.  
Caution  
Low fuel  
Y illuminates or flashes yellow.  
Engine lubrication may be  
interrupted. This may result in  
damage to the engine and/or  
locking of the drive wheels.  
Illuminates  
Level in fuel tank is too low.  
High beam assist  
f illuminates green.  
1. Select neutral gear.  
Flashes  
Fuel used up. Refuel immediately.  
Never run the tank dry.  
The high beam assist is activated  
3 130.  
2. Move out of the flow of traffic as  
quickly as possible without  
impeding other vehicles.  
LED headlights  
Refuelling 3 213.  
Catalytic converter 3 162.  
Bleeding the diesel fuel system  
3 228.  
3. Switch off ignition.  
f illuminates or flashes yellow.  
9 Warning  
Illuminates  
Fault in the system.  
Seek the assistance of a workshop.  
When the engine is off,  
considerably more force is needed  
to brake and steer.  
During an Autostop, the brake  
servo unit will still be operational.  
Do not remove key until vehicle is  
stationary, otherwise the steering  
wheel lock could engage  
unexpectedly.  
Immobiliser  
d flashes yellow.  
Flashes  
System is switched to symmetrical  
low beam.  
Fault in the immobiliser system. The  
engine cannot be started.  
Exterior light  
8 illuminates green.