Seats, restraints -> Rear seats for Your Vauxhall Astra 4 Door Seventh Generation (2016-2021)

54  
Seats, restraints  
the ignition is switched on. In addition,  
a message in the Driver Information  
Centre indicates the driver number,  
identified by the used key. If the  
ignition is switched on more than  
three subsequent times with the  
same key, the message will not be  
displayed again until another key is  
being used.  
To activate the easy exit function:  
for two seconds. Try recalling the  
memory position again. If the recall  
does not operate, consult a  
workshop.  
set selector lever to position P  
(automatic transmission)  
apply parking brake (manual  
transmission)  
Overload  
switch off ignition  
remove key from the ignition  
switch  
If the seat setting is electrically  
overloaded, the power supply is  
automatically cut-off for a short time.  
To stop recall movement, press one  
of the memory or power seat controls.  
Notice  
open the driver's door  
After an accident in which airbags  
have been deployed, the memory  
function for each position button will  
be deactivated.  
If the door is already open, switch off  
ignition to activate easy exit.  
To stop movement, press one of the  
memory or power seat controls.  
This function can be activated or  
deactivated in the vehicle  
personalisation.  
Select the relevant setting in the  
Vehicle menu in the Info Display.  
Info Display 3 120.  
Vehicle personalisation 3 123.  
Precondition is that Personalisation  
by Driver and Auto Memory Recall is  
activated in the personal settings of  
the Info Display.  
This function can be activated or  
deactivated in the vehicle  
personalisation.  
Select the relevant setting in the  
Vehicle menu in the Info Display.  
Info Display 3 120.  
Vehicle personalisation 3 123.  
Armrest  
Safety function  
Easy exit function  
If the driver's seat encounters  
resistance during movement, the  
recall may stop. After removing the  
obstruction, press and hold the  
appropriate memory position button  
For a convenient exit out of the  
vehicle, the power driver seat moves  
rearwards when vehicle is stationary.  
Seats, restraints  
55  
The armrest can be slid forwards by  
10 cm. Under the armrest there is a  
storage compartment.  
The seat heating will be reduced  
automatically from highest level to  
medium level after 30 minutes.  
The seat heating level being provided  
during the automatic operation is  
shown by heated seat indicator lights.  
Armrest storage 3 73.  
Seat heating is operational when  
engine is running and during an  
Autostop.  
If the passenger seat is unoccupied,  
the automatic seat heating feature will  
not activate the seat heating for that  
seat.  
Heating  
Stop-start system 3 156.  
The seat heating buttons can be  
pressed at any time to exit the  
automatic seat heating for the  
respective seat and control the seat  
heating manually instead.  
Automatic seat heating  
Depending on the equipment, the  
automatic seat heating can be  
enabled in the vehicle personalisation  
menu in the Info Display.  
Ventilating  
Vehicle personalisation 3 123.  
When enabled, the heating of the  
seats will be activated automatically  
at vehicle start. The activation is  
based on several parameters such as  
vehicle interior temperature, intensity  
and direction of the sun and  
Adjust heating to the desired setting  
by pressing ß for the respective seat  
one or more times. The control  
indicator in the button indicates the  
setting.  
Prolonged use of the highest setting  
for people with sensitive skin is not  
recommended.  
temperature setting of the electronic  
climate control system for the driver  
and passenger side.  
As the vehicle’s interior warms up, the  
seat heating level will be reduced  
automatically until it finally goes off.  
56  
Seats, restraints  
Adjust ventilating to the desired  
setting by pressing A for the  
respective seat one or more times.  
The control indicator in the button  
indicates the setting.  
After 10 minutes the massage  
function is switched off automatically.  
Rear seats  
Armrest  
Ventilated seats are operational when  
engine is running and during an  
Autostop.  
Stop-start system 3 156.  
Massage  
Fold armrest down.  
Press c to switch on the back  
massage function.  
To switch off, press c again.  
Seats, restraints  
57  
Seat belts are designed to be used by  
only one person at a time.  
Heating  
Seat belts  
Child restraint system 3 66.  
Periodically check all parts of the belt  
system for damage, soiling and  
proper functionality.  
Have damaged components replaced  
by a workshop. After an accident,  
have the belts and triggered belt  
pretensioners replaced by a  
workshop.  
Notice  
Make sure that the belts are not  
damaged by shoes or sharp-edged  
objects or are trapped. Prevent dirt  
from getting into the belt retractors.  
Activate seat heating by pressing ß  
for the respective rear outer seat.  
Activation is indicated by the LED in  
the button.  
Press ß once more to deactivate seat  
heating.  
Prolonged use for people with  
sensitive skin is not recommended.  
Seat heating is operational when  
engine is running and during an  
Autostop.  
The seat belts are locked during  
heavy acceleration or deceleration of  
the vehicle, holding the occupants in  
the seat position. Thereby the risk of  
injury is considerably reduced.  
Seat belt reminder  
Indicates seat belt status for front  
seats by control indicators X and k,  
or for rear seats by the symbol X in  
the Driver Information Centre 3 107.  
9 Warning  
Fasten seat belt before each trip.  
Belt force limiters  
Stress on the body is reduced by the  
gradual release of the belt during a  
collision.  
In the event of an accident, people  
not wearing seat belts endanger  
their fellow occupants and  
themselves.  
Stop-start system 3 156.