Storage -> Load compartment for Your Vauxhall Astra 4 Door Seventh Generation (2016-2021)

72  
Storage  
The glovebox features a pen holder,  
a coin holder and an adapter for the  
locking wheel nuts.  
Storage compartments  
Storage  
The glovebox should be closed whilst  
9 Warning  
Storage compartments ................ 72  
Glovebox ................................... 72  
Cupholders ................................ 72  
Front storage ............................. 73  
Armrest storage ......................... 73  
Load compartment ....................... 74  
Load compartment cover ........... 80  
Rear floor storage cover ............ 81  
Lashing eyes ............................. 82  
Cargo management system ...... 83  
Safety net .................................. 85  
Warning triangle ........................ 87  
First aid kit ................................. 87  
driving.  
Do not store heavy or sharp  
objects in the storage  
Cupholders  
compartments. Otherwise, the  
storage compartment lid could  
open and vehicle occupants could  
be injured by objects being thrown  
around in the event of hard  
braking, a sudden change in  
direction or an accident.  
Glovebox  
Roof rack system ......................... 88  
Roof rack ................................... 88  
Loading information ..................... 89  
Cupholders are located in the centre  
console.  
Illustrations show different versions.  
Storage  
73  
A combined storage and mobile  
device compartment is located in the  
instrument panel center stack.  
Front storage  
Armrest storage  
Storage under the front armrest  
Depending on the version,  
cupholders are located under a cover  
in the centre console. Slide cover  
backwards.  
A storage compartment is located  
next to the steering wheel.  
Press button to fold up the armrest.  
The armrest must be in rearmost  
position.  
74  
Storage  
Load compartment extension  
(two-part rear seat backrest), 5-  
door Hatchback  
Load compartment  
Depending on the equipment, the  
rear seat backrest is divided into two  
or three parts. All parts can be folded  
down.  
Before folding rear seat backrests,  
execute the following if necessary:  
5-door hatchback: remove the  
load compartment cover 3 80.  
Sports Tourer: remove roller  
blind 3 80.  
Press and hold the catch to push  
the head restraints down 3 47.  
Remove the rear head restraints  
to have the backrests fully rest on  
the seat cushions 3 47.  
Take the seat belt out of the seat  
backrest guide and put it behind  
the retainer as shown in the  
illustration.  
To fold up, raise the backrests  
and guide them into an upright  
position until they engage  
audibly.  
Guide the seat belts of the outer  
seats through side supports to  
protect them against damage.  
When folding the backrests, pull  
the seat belts along with them.  
Pull the lever on one or both outer  
sides and fold down the  
backrests onto the seat cushion.  
Storage  
75  
The backrests are properly  
engaged when the red mark near  
the lever is no longer visible.  
Pull the loop and fold down the  
backrest of the centre seat.  
The seat belt of the centre seat could  
be blocked when the backrest is  
folded up too quickly. To unlock the  
retractor, push in the seat belt or pull  
it out by approx. 20 mm then release.  
Pull the lever on one or both outer  
sides and fold down the  
9 Warning  
backrests onto the seat cushion.  
When folding up, ensure that  
backrests are securely locked in  
position before driving. Failure to  
do so may result in personal injury  
or damage to the load or vehicle in  
the event of hard braking or a  
collision.  
Load compartment extension  
(three-part rear seat backrest), 5-  
door Hatchback  
9 Warning  
Take care when folding down the  
right outer seat backrest if the  
centre seat backrest is already  
folded down. Risk of injury due to  
bolt protruding from the inner side  
of the backrest.  
Fold up the rear armrest.  
76  
Storage  
Take the seat belt out of the seat  
backrest guide and put it behind  
the retainer as shown in the  
illustration.  
To fold up, raise the backrests  
and guide them into an upright  
position until they engage  
audibly.  
9 Warning  
When folding up, ensure that  
backrests are securely locked in  
position before driving. Failure to  
do so may result in personal injury  
or damage to the load or vehicle in  
the event of hard braking or a  
collision.  
Guide the seat belts of the outer  
seats through side supports to  
protect them against damage.  
When folding the backrests, pull  
the seat belts along with them.  
The backrests are properly  
engaged when the red mark on  
both sides near the lever are no  
longer visible.  
The seat belt of the centre seat could  
be blocked when the backrest is  
folded up too quickly. To unlock the  
retractor, push in the seat belt or pull  
it out by approx. 20 mm then release.  
Storage  
77  
Load compartment extension  
(two-part rear seat backrest),  
Sports Tourer  
The backrests are properly  
Pull the lever on one or both outer  
sides and fold down the  
engaged when the red mark on  
both sides near the lever are no  
longer visible.  
backrests onto the seat cushion.  
To fold up, raise the backrests  
and guide them into an upright  
position until they engage  
audibly.  
Insert latch plates of the outer  
seat belts into side holder to  
protect the belts against damage,  
see illustration.  
9 Warning  
When folding up, ensure that  
backrests are securely locked in  
position before driving. Failure to  
do so may result in personal injury  
or damage to the load or vehicle in  
the event of hard braking or a  
collision.  
78  
Storage  
Insert latch plates of the outer  
seat belts into side holder to  
protect the belts against damage,  
see illustration.  
Pull the loop and fold down the  
backrest of the centre seat.  
The seat belt of the centre seat could  
be blocked when the backrest is  
folded up too quickly. To unlock the  
retractor, push in the seat belt or pull  
it out by approx. 20 mm then release.  
Pull the lever on one or both outer  
sides and fold down the  
backrests onto the seat cushion.  
Load compartment extension  
(three-part rear seat backrest),  
Sports Tourer  
9 Warning  
Fold up the rear centre armrest.  
Take care when folding down the  
right outer seat backrest if the  
centre seat backrest is already  
folded down. Risk of injury due to  
bolt protruding from the inner side  
of the backrest.  
Storage  
79  
Ensure that nothing is attached to  
the rear seats or located on the  
seat cushion.  
9 Warning  
When folding up, ensure that  
backrests are securely locked in  
position before driving. Failure to  
do so may result in personal injury  
or damage to the load or vehicle in  
the event of hard braking or a  
collision.  
To fold up, raise the backrests  
and guide them into an upright  
position until they engage  
audibly.  
Alternatively fold seat backrests  
from the load compartment: pull  
switch on left or right sidewall of  
the load compartment to fold the  
corresponding part of the rear  
seat backrest.  
9 Warning  
The backrests are properly  
engaged when the red mark on  
the levers on both sides are no  
longer visible.  
Take care when operating the rear  
backrests from the load  
compartment. The backrest is  
folded with considerable power.  
Risk of injury, particularly to  
children.  
The seat belt of the centre seat could  
be blocked when the backrest is  
folded up too quickly. To unlock the  
retractor, push in the seat belt or pull  
it out by approx. 20 mm then release.  
80  
Storage  
Opening roller blind  
Load compartment cover  
Do not place any objects on the cover.  
5-door hatchback  
Removing cover  
Lift cover at the rear.  
Remove the cover.  
Pull the roller blind handle to the rear  
and downwards. It rolls up  
automatically.  
Fitting cover  
Engage cover in side guides and fold  
downwards. Attach retaining straps to  
tailgate.  
Unhook retaining straps from tailgate.  
Sports Tourer  
Closing roller blind  
Pull the roller blind using the handle  
towards the rear and upwards until it  
engages in the sideward retainers.  
Storage  
81  
Removing roller blind  
Rear floor storage cover  
Rear floor cover  
5-door Hatchback  
All engine versions, except CNG: The  
removed roller blind can be stored  
under the rear floor cover as shown in  
the illustration. Insert the left side of  
the rolled up cover first in the front  
right recess, pull the lever up and  
insert the right side in the front left  
recess.  
Open the roller blind.  
Pull the lever on the right side up and  
hold it. Lift the roller blind first on the  
right side and remove from retainers.  
The rear floor cover can be removed.  
Raise cover at the rear and slightly  
rotate at one side before removing.  
Rear floor storage cover 3 81.  
Installing roller blind  
Insert the left side of the roller blind in  
recess, then pull lever up.  
Hold and insert the right side of the  
roller blind in recess and engage.  
82  
Storage  
Sports Tourer  
Set up the folded cover upright behind  
the rear seat backrests.  
Lashing eyes  
The lashing eyes are designed to  
secure items against slippage, e.g.  
using lashing straps or luggage net.  
5-door Hatchback  
First remove the rear floor storage  
cover to get access to the lashing  
eyes.  
On vehicles equipped with tyre repair  
kit, the front lashing eyes are located  
underneath the rear floor cover  
behind the rear seats. To get access  
to the lashing eyes, open the  
Pull the handle and fold the rear part  
of the cover forward.  
perforated parts of the cover by using  
the screwdriver.  
Vehicle tools 3 246.  
Stick the screwdriver through the  
cover as shown in the illustration and  
fold up the perforated part of the  
cover.  
Fold up the lashing eyes by using the  
screwdriver.  
On vehicles equipped with a spare  
wheel, the front lashing eyes are  
located at the sidewalls.  
Storage  
83  
service box  
strap set  
Sports Tourer  
Variable partition net  
The components are fitted in rails on  
both side panels using adapters and  
hooks.  
Installation of adapters in the rails  
Front and rear lashing eyes are  
located at the sidewalls. Fold up the  
lashing eyes to use and fold down  
when not required.  
Insert adapters into the required  
position in the rails. Stick together the  
halves of the net rods.  
To install, push rods together a little  
and insert into the relevant openings  
in the adapters.  
To remove, press the net rods  
together and remove from the  
adapters.  
Cargo management system  
Fold open the handle plate, insert the  
adapter into the upper and lower  
groove of the rail and move to the  
required position. Turn the handle  
plate upwards to lock the adapter. To  
remove, turn the handle plate down  
and move out of the rail.  
The FlexOrganizer is a flexible  
system for dividing up the load  
compartment.  
The system consists of:  
adapters  
mesh pockets  
hooks  
84  
Storage  
Net pocket  
Installation of hooks in the rails  
Service box  
Insert adapters into the required  
position in the rails. The net pocket  
can be suspended from the adapters.  
Insert the hook in the desired position  
first in the upper groove of the rail and  
then press in the lower groove. To  
remove, first pull out of the upper  
groove.  
Install two hooks in the upper rail.  
Insert the upper brackets of the box  
from above into the hooks.  
Storage  
85  
Alternatively install both hooks in the  
lower rail. Plug in the lower brackets  
of the box from above into the lower  
hooks.  
and engage rod of net at one  
side, compress rod and suspend  
and engage at the other side.  
Safety net  
The safety net is available on the  
Sports Tourer and can be installed  
behind the rear seats or, if the rear  
seat backrests are folded, behind the  
front seats.  
Strap set  
Passengers must not be transported  
behind the safety net.  
Installation  
Behind the rear seats  
Attach the hooks of safety net  
straps in loops underneath the  
rear floor cover behind the rear  
seats. To get access to the loops,  
open the perforated parts in the  
floor cover on both sides by using  
the screwdriver and fold up the  
loops. Attach the hooks to the  
loops.  
Insert the adapters of the strap set in  
a rail. Make sure that the belt is not  
twisted.  
The strap set has two locks to open.  
The belt can be tightened.  
There are installation openings  
on both sides in the roof frame  
above the rear seats: suspend  
Tension both straps by pulling at  
the loose end.  
Rear seat backrests must be  
raised up.