274
Technical data
Information on identification label:
1 : manufacturer
Specifications in the vehicle
documents always have priority over
those given in this manual.
Identification plate
2 : type approval number
3 : vehicle identification number
4 : permissible gross vehicle weight
rating in kg
Engine identification
The technical data tables use the
engine identifier code. The engine
data table additionally shows the
engineering code.
5 : permissible gross train weight
in kg
6 : maximum permissible front axle
load in kg
Engine data 3 278.
7 : maximum permissible rear axle
load in kg
To identify the respective engine,
refer to the EEC Certificate of
Conformity provided with your vehicle
or other national registration
documents.
The Certificate of Conformity shows
the engine identifier code, other
national publications may show the
engineering code. Check piston
displacement and engine power to
identify the respective engine.
8 : vehicle-specific or country-
specific data
The identification plate is located on
the front left or right door frame.
The combined total of front and rear
axle loads must not exceed the
permissible gross vehicle weight.
Vehicle's kerb weight depends on the
specification of the vehicle, e.g.
optional equipment and accessories.
Refer to the EEC Certificate of
Conformity provided with your vehicle
or other national registration
documents.
The technical data is determined in
accordance with European
Community standards. We reserve
the right to make modifications.
English 
