Instruments and controls
87
●
●
green: regenerating energy
orange: combustion engine
operating (PHEV)
●
●
The green graph shows the
energy regenerated during
deceleration and braking phases
to recharge the high voltage
battery.
The blue graph shows the energy
consumed directly from the high
voltage battery.
The function can be activated in the
Info Display.
1. Press ?.
2. Touch a.
3. Select e-SAVE.
4. Select the distance for which
electrical is to be reserved or
reserve the whole capacity of the
high voltage battery.
●
blue: electric engine operating
Average consumption
This menu displays the average
power and fuel consumption during
the current trip. The current trip is
subdivided into time steps. For each
time step, the average consumption
is displayed. The time steps can be
modified.
1. Press ?.
2. Touch a.
3. Select Statistics.
4. Press + and - to modify the time
Fuel consumption
The orange graph shows the average
fuel consumption on the current trip in
litre per 100 miles and historical
values.
5. Press ON.
a illuminates in the Driver
Information Centre when the
function is activated.
e-SAVE function (PHEV)
This function allows to provide
electrical energy of the high voltage
battery for a later use, e.g. for driving
in areas restricted to electrical
vehicles. It is possible to reserve the
complete electrical energy of the
battery or a part of it.
steps.
Power consumption
The consumption of electrial power is
displayed in kWh/100 miles.
Notice
If the energy requested exceeds the
energy of the high voltage battery,
the combustion engine charges the
battery. This results in a loss of
performance and a higher fuel
consumption.
6. To use the reserved electrical
energy change to electric mode.
English 