Instruments and controls for Your Vauxhall Combo Van Fifth Generation (2018-2026)

88  
Instruments and controls  
Engine oil level monitor ............. 99  
Service display .......................... 99  
Control indicators .................... 100  
Turn lights ................................ 100  
Seat belt reminder ................... 101  
Airbag and belt tensioners ....... 101  
Airbag deactivation .................. 102  
Charging system ..................... 102  
Malfunction indicator light ........ 102  
Service vehicle soon ............... 102  
Stop engine ............................. 102  
System check .......................... 103  
Brake and clutch system ......... 103  
Parking brake .......................... 103  
Electric parking brake .............. 103  
Electric parking brake fault ...... 103  
Antilock brake system (ABS) ... 104  
Gear shifting ............................ 104  
Overload indicator ................... 104  
Descent control system ........... 104  
Lane keep assist ..................... 104  
Electronic Stability Control and  
Autostop .................................. 106  
Exterior light ............................ 106  
High beam ............................... 106  
Low beam ................................ 106  
High beam assist ..................... 106  
LED headlights ........................ 106  
Front fog lights ......................... 106  
Rear fog light ........................... 107  
Rain sensor ............................. 107  
Cruise control .......................... 107  
Adaptive cruise control ............ 107  
Side blind spot alert ................. 107  
Active emergency braking ....... 107  
Speed limiter ........................... 107  
Door open ................................ 107  
Displays ..................................... 108  
Driver Information Centre ........ 108  
Info Display .............................. 110  
Head-up display ...................... 112  
Rear view display .................... 113  
Vehicle messages ...................... 114  
Warning chimes ....................... 114  
Instruments and  
controls  
Controls ....................................... 89  
Steering wheel adjustment ........ 89  
Steering wheel controls ............. 89  
Heated steering wheel ............... 89  
Horn ........................................... 90  
Windscreen wiper and washer . . 90  
Rear window wiper and  
washer ...................................... 92  
Outside temperature .................. 92  
Clock ......................................... 93  
Power outlets ............................. 93  
Inductive charging ..................... 94  
Cigarette lighter ......................... 95  
Ashtrays .................................... 96  
Warning lights, gauges and indi‐  
cators ........................................... 96  
Instrument cluster ...................... 96  
Speedometer ............................. 97  
Odometer .................................. 97  
Trip odometer ............................ 97  
Tachometer ............................... 98  
Fuel gauge ................................ 98  
Engine coolant temperature  
Traction Control system ......... 104  
Engine coolant temperature .... 104  
Preheating ............................... 105  
Exhaust filter ............................ 105  
AdBlue ..................................... 105  
Deflation detection system ...... 105  
Engine oil pressure .................. 105  
Low fuel ................................... 106  
Vehicle personalisation .............. 115  
Telematics services ................... 119  
Vauxhall Connect .................... 119  
gauge ....................................... 99  
Instruments and controls  
Heated steering wheel  
89  
Steering wheel controls  
Controls  
Steering wheel adjustment  
Cruise control and speed limiter are  
operated via the controls on the left  
side of the steering wheel.  
Additionally, adaptive cruise control  
can be set by using the controls on the  
left side of the steering wheel.  
Infotainment system can be operated  
via the controls on the right side of the  
steering wheel.  
Activate heating by pressing *.  
Activation is indicated by the LED in  
the button.  
Unlock lever, adjust steering wheel,  
then engage lever and ensure it is  
fully locked.  
Do not adjust steering wheel unless  
vehicle is stationary and steering  
wheel lock has been released.  
Heating is operational when the  
engine is running and during an  
Autostop.  
Stop-start system 3 147.  
Further information is available in the  
Infotainment manual.  
Driver assistance systems 3 167.  
90  
Instruments and controls  
To activate interval wiping mode the  
next time ignition is switched on,  
press the lever downwards to position  
OFF and back to INT.  
Horn  
Windscreen wiper and  
washer  
Windscreen wiper with adjustable  
wiper interval  
Adjustable wiper interval  
Press j.  
HI : fast  
Wiper lever in position INT.  
Turn the adjuster wheel to adjust the  
desired wipe interval.  
LO : slow  
INT : interval wiping  
OFF : off  
For a single wipe when the  
windscreen wiper is off, press the  
lever down to position 1x.  
Do not use if the windscreen is frozen.  
Switch off in car washes.  
Instruments and controls  
Windscreen washer  
91  
Windscreen wiper with rain sensor  
switched on, press the lever  
downwards to position OFF and back  
to AUTO.  
For a single wipe when the  
windscreen wiper is off, press the  
lever downwards to position 1x.  
Do not use if the windscreen is frozen.  
Switch off in car washes.  
Adjustable sensitivity of the rain  
sensor  
HI  
: fast  
Pull lever. Washer fluid is sprayed  
onto the windscreen and the wiper  
wipes a few times.  
LO  
: slow  
AUTO : automatic wiping with rain  
sensor  
Washer fluid 3 216.  
OFF : off  
In AUTO position, the rain sensor  
detects the amount of water on the  
windscreen and automatically  
regulates the frequency of the  
windscreen wiper. If ignition is  
switched off, automatic wiping mode  
is deactivated. To activate automatic  
wiping mode the next time ignition is  
Turn the adjuster wheel to adjust the  
sensitivity.  
Make sure the sensor is not blocked  
3 40, 3 10.  
Control indicator < 3 90.  
92  
Instruments and controls  
Activation or deactivation of this  
function can be changed in the  
Vehicle personalisation menu 3 115.  
Rear window wiper and  
washer  
Rear window wiper  
Outside temperature  
A drop in temperature is indicated  
immediately and a rise in temperature  
after a time delay.  
Rear window washer  
OFF : off  
Illustration shows an example.  
Push lever.  
INT : intermittent operation  
If outside temperature drops to 3 °C,  
a warning message is displayed in the  
Driver Information Centre.  
Washer fluid is sprayed onto the rear  
window and the wiper wipes a few  
times.  
Do not use if the rear window is  
frozen.  
Switch off in car washes.  
The rear window washer system is  
deactivated when the fluid level is  
low.  
9 Warning  
The rear window wiper comes on  
automatically when the windscreen  
wiper is switched on and reverse gear  
is engaged.  
The road surface may already be  
icy even though the display  
indicates a few degrees above 0  
°C.  
Washer fluid 3 216.  
Instruments and controls  
93  
Clock  
Date and time are shown in the Info  
Display.  
The adjustment of date and time is  
described in the Infotainment Manual.  
Info Display 3 110.  
Power outlets  
At the right side of the load  
compartment, another 12 V power  
outlet may be located.  
Do not exceed the maximum power  
consumption of 120 W.  
A 230 V power outlet may be located  
on the lower side of the centre  
console in the front passenger  
compartment.  
Do not exceed the maximum power  
consumption of 150 W.  
With ignition off, the power outlets are  
deactivated. Additionally the power  
outlets are deactivated in the event of  
low vehicle battery voltage.  
Electrical accessories that are  
connected must comply with the  
electromagnetic compatibility  
requirements laid down in  
DIN VDE 40 839.  
A 12 V power outlet is located behind  
the storage cover. Push cover  
upwards to open.  
Depending on the version, the 12 V  
power outlet may be freely  
accessible.  
94  
Instruments and controls  
Do not connect any current-delivering  
accessories, e.g. electrical charging  
devices or batteries.  
Do not damage the outlet by using  
unsuitable plugs.  
A further USB port may be located in  
the rear console.  
The USB ports are prepared for  
charging external devices and  
provide a data connection to the  
Infotainment system. For further  
information, see Infotainment  
manual.  
Stop-start system 3 147.  
USB ports  
Notice  
The sockets must always be kept  
clean and dry.  
Inductive charging  
A USB port may be located within the  
compartment located above the  
glovebox.  
9 Warning  
Inductive charging can affect the  
operation of implanted  
pacemakers or other medical  
devices. If applicable, seek  
medical advice before using the  
inductive charging device.  
A USB port is located in the  
instrument panel next to the Info  
Display.  
Instruments and controls  
Cigarette lighter  
95  
To charge a mobile device:  
9 Warning  
1. Remove all objects from the  
charging device.  
Remove any metal objects from  
the charging device before  
charging a mobile device, as these  
objects could become very hot.  
2. Place the mobile device with the  
display facing upwards on the  
charging device in the storage.  
Charging status is indicated in the  
LED: illuminates green, when mobile  
device is charging.  
Protective cover for the mobile device  
could have impact on the inductive  
charging.  
In the event that the mobile device is  
not charging properly, rotate it 180°  
and place it on the charging device  
again.  
The cigarette lighter is freely  
accessible.  
Depending on version, the cigarette  
lighter may be located behind the  
storage cover. Press cover to open.  
Press in cigarette lighter. It switches  
off automatically once the element is  
glowing. Pull out cigarette lighter.  
The portable device to be charged  
must be compatible with the Qi  
standard, either by design or by using  
a compatible holder or shell. The  
charging zone is identified by the Qi  
symbol.  
To charge a device, the ignition must  
be switched on.  
96  
Instruments and controls  
Ashtrays  
Z
Malfunction indicator light  
Warning lights, gauges  
and indicators  
3 102  
Caution  
C
Service vehicle soon 3 102  
Instrument cluster  
To be used only for ash and not for  
combustible rubbish.  
Y Stop engine 3 102  
Depending on the version, the Driver  
Information Centre may vary.  
J
System check 3 103  
R
Brake and clutch system  
3 103  
m, o Parking brake3 103  
Electric parking brake 3 103  
u
Antilock brake system (ABS)  
3 104  
R
Gear shifting 3 104  
Overview  
L
b
Lane keep assist 3 104  
O
X
Turn signal 3 100  
Electronic Stability Control  
and Traction Control system  
3 104  
A portable ashtray can be placed in  
the cupholders.  
Seat belt reminder 3 101  
v
Airbag and belt tensioners  
3 101  
!
%
Y
Preheating 3 105  
Exhaust filter 3 105  
AdBlue 3 105  
V
Airbag deactivation 3 102  
Charging system 3 102  
p
Instruments and controls  
Driver Information Centre  
97  
Ø
Deflation detection system  
3 105  
Active emergency braking  
3 179  
w
h
I
Engine oil pressure 3 105  
Door open 3 107  
&
Y o Low fuel 3 106  
Overload indicator 3 104  
W o Engine coolant temperature  
high 3 104  
Speedometer  
D
Autostop 3 106  
8
9
C
f
ò
>
ø
<
Exterior light 3 106  
Low beam 3 106  
High beam 3 106  
High beam assist 3 106  
Trip odometer  
The recorded distance since the last  
reset is displayed in the Driver  
Information Centre.  
Descent control system  
3 104  
Front fog lights3 106  
Rear fog light 3 107  
Rain sensor 3 107  
Indicates vehicle speed.  
Odometer  
B
m
ß
Side blind spot alert 3 107  
Cruise control 3 107  
Speed limiter 3 107  
The total recorded distance is  
displayed in miles.  
98  
Instruments and controls  
The trip / fuel information menu  
provides additionally two trip counter  
3 108.  
Caution  
If the needle is beyond the red  
marker, the maximum permitted  
engine speed is exceeded. Engine  
at risk.  
Tachometer  
Fuel gauge  
Monochrome display  
Trip odometer counts up to  
9,999.9 miles without automatic  
reset.  
Press L for 2 seconds to reset trip  
odometer.  
Displays the engine speed.  
Drive in a low engine speed range for  
each gear as much as possible.  
Colour display  
Trip odometer counts up to  
1,999.9 miles and resets then  
automatically.  
Press L for 2 seconds to reset trip  
odometer.  
Displays the fuel level.  
Control indicator o illuminates if the  
fuel level is low.  
A red marker indicates the beginning  
of the warning zone of excessive  
revolutions. For Diesel engines, the  
warning zone starts at 5000  
revolutions per minute. For petrol  
engines, the warning zone starts at  
7000 revolutions per minute.  
Never run the fuel tank dry.  
Because of the fuel remaining in the  
tank, the top-up quantity may be less  
than the specified fuel tank capacity.  
Instruments and controls  
Service display  
99  
Engine coolant temperature  
gauge  
Caution  
The service system informs when to  
change the engine oil and filter or a  
vehicle service is required. Based on  
driving conditions, the interval at  
which an engine oil and filter change  
is required can vary considerably.  
If engine coolant temperature is  
too high, stop vehicle, switch off  
engine. Danger to engine. Check  
coolant level.  
Service information 3 251.  
Engine oil level monitor  
A required service due is displayed in  
the Driver Information Centre for  
seven seconds after switching on the  
ignition.  
The state of the engine oil level is  
displayed in the Driver Information  
Centre for a few seconds following  
the service information after switching  
on the ignition.  
If no service is required for the next  
1800 miles or more no service  
A proper state of engine oil level is  
indicated by the message Oil level  
correct.  
If engine oil level is low, I flashes  
and Oil level incorrect is indicated,  
accompanied by C. Confirm  
engine oil level by using the oil  
dipstick and top up engine oil  
respectively.  
information appears in the display.  
Displays the coolant temperature.  
If service is required within the next  
1800 miles, the remaining distance or  
time duration is indicated for several  
seconds. Simultaneously C  
50 : engine operating temperature  
not yet reached  
90 : normal operating temperature  
130 : temperature too high  
illuminates permanently as reminder.  
Control indicator o illuminates if  
coolant temperature is too high.  
Switch off engine immediately.  
If service is required in less than  
600 miles, C flashes and then  
illuminates permanently. Remaining  
distance or time duration is indicated  
for several seconds.  
Engine oil 3 214.  
A fault of measurement is indicated  
by the message Oil level  
measurement invalid. Check engine  
oil level manually by using the  
dipstick.  
Overdued service is indicated by a  
message in the Driver Information  
Centre which indicates the overdued  
100  
Instruments and controls  
distance. C flashes and then  
illuminates permanently until service  
is executed.  
ignition is switched on, most control  
indicators will illuminate briefly as a  
functionality test.  
Retrieving service information  
The control indicator colours mean:  
Reset of service interval  
red  
: danger, important reminder  
After each service, the service  
indicator must be reset to ensure  
proper functionality. It is  
yellow : warning, information, fault  
green : confirmation of activation  
blue : confirmation of activation  
white : confirmation of activation  
recommended to seek the assistance  
of a workshop.  
See all control indicators on different  
instrument clusters 3 96.  
If service is executed by yourself,  
operate as following:  
switch off ignition  
press and hold button CHECK  
switch on ignition, the distance  
indication begins a countdown  
when the display indicates =0,  
release the button  
Turn lights  
To retrieve the status of the service  
information at any time press button  
CHECK. The service information is  
displayed for a few seconds.  
O illuminates or flashes green.  
Illuminates briefly  
The parking lights are switched on.  
Service information 3 251.  
C disappears  
Flashes  
Turn lights or the hazard warning  
flashers are activated.  
Rapid flashing: failure of a turn light or  
associated fuse, failure of turn light on  
trailer.  
Bulb replacement 3 220.  
Turn lights 3 125.  
Control indicators  
The control indicators described are  
not present in all vehicles. The  
description applies to all instrument  
versions. Depending on the  
equipment, the position of the control  
indicators may vary. When the  
Instruments and controls  
101  
cluster and the symbols in the  
roof console illuminate until seat  
belt is fastened.  
system. Seek the assistance of a  
workshop. The airbags and belt  
pretensioners may fail to trigger in the  
event of an accident.  
Deployment of the belt pretensioners  
or airbags is indicated by continuous  
illumination of v.  
Seat belt reminder  
X illuminates or flashes in the  
instrument cluster. Additionally, there  
is an indication in the roof console.  
The big symbols refer to the seat belts  
of the front seats, the small symbols  
refer to the second row rear seats.  
When driving faster than  
12 mph and a seat belt is  
unfastened, the symbol in the  
roof console for the respective  
seat flashes and a chime is  
audible. For the second row rear  
seats, this only applies if at least  
one rear seat belt was previously  
fastened.  
9 Warning  
Have the cause of the fault  
remedied immediately by a  
workshop.  
Aditionally, X illuminates in the  
instrument cluster.  
After two minutes the chime goes  
off and X in the roof console  
illuminates constantly until the  
seat belt of the respective seat is  
fastened.  
Belt pretensioners 3 54.  
Airbag system 3 57.  
When the ignition is switched on,  
X in the instrument cluster and  
the symbols in the roof console  
come on for a short time. For the  
front seats, X in the instrument  
Airbag and belt tensioners  
v illuminates red.  
When the ignition is switched on, the  
control indicator illuminates for  
approx. four seconds. If it does not  
illuminate, does not extinguish after  
four seconds or illuminates whilst  
driving, there is a fault in the airbag  
102  
Instruments and controls  
Illuminates when the engine is  
running  
Flashes when the engine is  
running  
Airbag deactivation  
Stop, switch off engine. Vehicle  
battery is not charging. Engine  
cooling may be interrupted. The  
brake servo unit may cease to be  
effective. Seek the assistance of a  
workshop.  
Fault that could lead to catalytic  
converter damage. Ease up on the  
accelerator until the flashing stops.  
Seek the assistance of a workshop  
immediately.  
Service vehicle soon  
Malfunction indicator light  
C illuminates yellow.  
Z illuminates or flashes yellow.  
Illuminates briefly when the ignition is  
switched on.  
Illuminates when the ignition is  
switched on and extinguishes shortly  
after the engine starts.  
May illuminate together with other  
control indicators and a  
ÓON illuminates yellow.  
The front passenger airbag is  
activated.  
*OFF illuminates yellow.  
The front passenger airbag is  
deactivated.  
corresponding message in the Driver  
Illuminates when the engine is  
running  
Fault in the emission control system.  
The permitted emission limits may be  
exceeded. Seek the assistance of a  
workshop immediately.  
Information Centre.  
Seek the assistance of a workshop  
immediately.  
Airbag deactivation 3 62.  
Stop engine  
Y illuminates red.  
Charging system  
p illuminates red.  
Illuminates briefly when the ignition is  
switched on.  
Illuminates when the ignition is  
switched on and extinguishes shortly  
after the engine starts.  
Instruments and controls  
103  
Illuminates together with other control  
indicators, accompanied by a warning  
chime and a corresponding message  
in the Driver Information Centre.  
Stop engine immediately and seek  
the assistance of a workshop.  
9 Warning  
9 Warning  
Stop. Do not continue your  
journey. Consult a workshop.  
Have the cause of the fault  
remedied immediately by a  
workshop.  
Parking brake  
o illuminates yellow.  
m illuminates red.  
System check  
Illuminates  
Illuminates when the manual parking  
brake is applied and ignition is  
switched on 3 160.  
J illuminates yellow or red.  
Automatic operation is deactivated or  
faulty. Activate automatic operation  
again or have the cause remedied by  
a workshop in the event of a fault.  
Illuminates yellow  
A minor engine fault has been  
detected.  
Electric parking brake  
Automatic operation 3 160.  
m illuminates or flashes red.  
Illuminates red  
A major engine fault has been  
detected.  
Stop engine as soon as possible and  
seek the assistance of a workshop.  
Illuminates  
Electric parking brake fault  
Electric parking brake is applied  
E illuminates yellow.  
3 160.  
Illuminates  
Flashes  
Electric parking brake has a fault  
Electric parking brake is not applied  
automatically. The application or the  
release is faulty.  
3 160.  
Brake and clutch system  
R illuminates red.  
The brake and clutch fluid level is too  
low.  
9 Warning  
Have the cause of the fault  
remedied immediately by a  
workshop.  
104  
Instruments and controls  
Lane keep assist 3 198.  
Antilock brake system  
(ABS)  
Descent control system  
ò illuminates or flashes green.  
Electronic Stability Control  
and Traction Control system  
b illuminates or flashes yellow.  
u illuminates yellow.  
Iluminates green  
The system is switched on and ready  
to operate.  
Illuminates for a few seconds after the  
ignition is switched on. The system is  
ready for operation when the control  
indicator extinguishes.  
If the control indicator does not  
extinguish after a few seconds, or if it  
illuminates while driving, there is a  
fault in the ABS. The brake system  
remains operational but without ABS  
regulation.  
Illuminates  
Flashes green  
The system is in operation.  
A fault in the system is present.  
Continued driving is possible. Driving  
stability, however, may deteriorate  
depending on road surface  
conditions.  
Have the cause of the fault remedied  
by a workshop.  
Lane keep assist  
a illuminates green or yellow, or  
flashes yellow.  
Antilock brake system 3 159.  
Illuminates green  
The system is switched on and ready  
to operate.  
Flashes  
Gear shifting  
The system is actively engaged.  
Engine output may be reduced and  
the vehicle may be braked  
R with the number of a higher gear is  
indicated, when upshifting is  
recommended for fuel saving  
reasons.  
Illuminates yellow  
The system approaches a detected  
lane marking without using the turn  
light in that direction.  
automatically to a small degree.  
Electronic Stability Control and  
Traction Control system 3 163.  
Selective ride control 3 165.  
Overload indicator  
& illuminates.  
Flashes yellow  
The system recognizes that the lane  
is departed significantly.  
Illuminates when the overload  
Engine coolant temperature  
o illuminates red.  
indicator detects an exceeding of the  
maximum authorised weight 3 86.  
Instruments and controls  
105  
Continue driving until the control  
indicator extinguishes.  
AdBlue 3 152.  
Illuminates when the engine is  
running  
Deflation detection system  
Stop, switch off engine.  
Illuminates temporarily  
w illuminates or flashes yellow.  
Start of saturation of the exhaust filter.  
Start cleaning process as soon as  
possible by driving at a vehicle speed  
of at least 40 mph.  
Caution  
Illuminates  
Tyre pressure loss in one or more  
wheels. Stop immediately and check  
tyre pressure.  
Coolant temperature too high.  
Check coolant level immediately  
3 215.  
If there is sufficient coolant, consult a  
workshop.  
Illuminates constantly  
Indication of a low additive level. Seek  
the assistance of a workshop.  
Flashes  
Fault in system. Consult a workshop.  
Deflation detection system 3 233.  
Exhaust filter 3 151.  
Preheating  
! illuminates yellow.  
Preheating of diesel engine is  
activated. Only activates when  
outside temperature is low. Start the  
engine when control indicator  
extinguishes.  
AdBlue  
Engine oil pressure  
I illuminates red.  
Illuminates when the ignition is  
switched on and extinguishes shortly  
after the engine starts.  
Y flashes or illuminates yellow.  
Illuminates yellow  
The remaining driving range is  
between 500 miles and 1500 miles.  
Flashes yellow  
The remaining driving range is  
between 0 miles and 500 miles.  
AdBlue level is low. Refill AdBlue  
soon to avoid prevention of the  
engine start.  
Exhaust filter  
% or C illuminates yellow,  
accompanied by a message in the  
Driver Information Centre.  
The exhaust filter requires cleaning.  
106  
Instruments and controls  
Keep engine turned off and let the  
vehicle be towed to a workshop.  
Illuminates when the engine is  
running  
High beam  
C illuminates blue.  
Illuminates when high beam is on,  
Caution  
Low fuel  
during headlight flash 3 122.  
o illuminates yellow.  
Level in fuel tank is too low.  
Refuelling 3 204.  
Engine lubrication may be  
interrupted. This may result in  
damage to the engine and / or  
locking of the drive wheels.  
Low beam  
9 illuminates green.  
Illuminated when low beam is on.  
Bleeding the diesel fuel system  
3 219.  
1. Select neutral gear.  
High beam assist  
2. Move out of the flow of traffic as  
quickly as possible without  
impeding other vehicles.  
Autostop  
f illuminates green.  
D illuminates or flashes green.  
The high beam assist is activated  
3 122.  
3. Switch off ignition.  
Illuminates green  
Engine is in an Autostop.  
9 Warning  
LED headlights  
Flashes green  
Autostop is temporarily unavailable,  
or Autostop mode is invoked  
automatically.  
When the engine is off,  
C illuminates and a warning  
message is displayed in the Driver  
Information Centre.  
considerably more force is needed  
to brake and steer. During an  
Autostop the brake servo unit will  
still be operational.  
Seek the assistance of a workshop.  
Stop-start system 3 147.  
Do not remove key until vehicle is  
stationary, otherwise the steering  
wheel lock could engage  
unexpectedly.  
Front fog lights  
> illuminates green.  
The front fog lights are on 3 125.  
Exterior light  
8 illuminates green.  
The exterior lights are on 3 121.  
Instruments and controls  
107  
Check the reason of the deactivation  
3 179 and in case of a system fault,  
seek the assistance of a workshop.  
m illuminates white  
Rear fog light  
r illuminates yellow.  
The rear fog light is on 3 125.  
The system is on.  
m illuminates green  
Flashes  
The system is actively engaged.  
Depending on the situation, the  
vehicle may automatically brake  
moderately or hard.  
Forward collision alert 3 178.  
Front pedestrian protection 3 182.  
Active emergency braking 3 179.  
Adaptive cruise control is active.  
Rain sensor  
When Adaptive cruise control is on or  
active, C with the set speed is  
indicated in the Driver Information  
Centre.  
< illuminates green.  
Illuminated when rain sensor position  
on wiper lever is selected.  
Adaptive cruise control 3 171.  
Cruise control  
m illuminates white or green.  
Side blind spot alert  
B illuminates continously green in the  
Illuminates white  
The system is on.  
Speed limiter  
instrument cluster.  
ß illuminates in the Driver  
Information Centre when speed  
limiter is active. Set speed is indicated  
alongside ß symbol.  
The system is active 3 191.  
Illuminates green  
Cruise control is active. Set speed is  
indicated in the Driver Information  
Centre.  
Active emergency braking  
Speed limiter 3 169.  
m illuminates or flashes yellow.  
Illuminates  
Cruise control 3 167.  
Door open  
The system has been deactivated or  
a fault has been detected.  
Additionally, a warning message is  
displayed in the Driver Information  
Centre.  
h illuminates red.  
Adaptive cruise control  
A door or the tailgate is open.  
m illuminates white or green.  
C illuminates in the Driver  
Information Centre.  
108  
Instruments and controls  
Displays  
Driver Information Centre  
The Driver Information Centre is  
located in the instrument cluster.  
Driver Information Centre indicates:  
overall and trip odometer  
digital speed indication  
trip / fuel information menu  
gear shift indication  
service information  
Turn the adjuster wheel to select a  
page in the trip / fuel information  
menu.  
Press SET / CLR to confirm or reset  
a function.  
Press CHECK to switch between the  
respective menus.  
Vehicle messages 3 114.  
vehicle and warning messages  
driver assistance messages  
pop-up messages  
Vehicle and service messages are  
popped up in the Driver Information  
Centre if required. Scroll messages  
by turning the adjuster wheel.  
Confirm messages by pressing  
SET / CLR.  
Selecting menus and functions  
The menus and functions can be  
selected via the buttons on the  
indicator lever.  
Additionally, some menus can be  
selected via the CHECK button.  
Instruments and controls  
109  
Average speed  
Trip / fuel information menu,  
Midlevel display  
Trip / fuel information menu,  
Uplevel display  
Display of average speed. The  
measurement can be reset at any  
time.  
To reset, press SET/CLR for a few  
seconds.  
Fuel range  
Range is calculated from current fuel  
level and current consumption. The  
display shows average values.  
After refuelling, the range is updated  
automatically after a brief delay.  
When the fuel level is low, a message  
appears on the display and the  
control indicator o in the fuel gauge  
illuminates 3 106.  
Select the required page:  
Differerent pages with combined  
information can be selected.  
Select the required page:  
Trip odometer  
The recorded distance since the  
Instantaneous Fuel Consumption  
Display of the instantaneous  
consumption.  
reset.  
Information page:  
Fuel range  
Range is calculated from current fuel  
level and current consumption. The  
display shows average values.  
Press L for 2 seconds to reset trip  
odometer.  
Digital speed  
Digital display of the instantaneous  
speed.  
Average fuel consumption  
Display of average consumption. The  
measurement can be reset at any  
time and starts with a default value.  
To reset, press SET/CLR for a few  
seconds.  
After refuelling, the range is updated  
automatically after a brief delay.  
110  
Instruments and controls  
When the fuel level is low, a message  
appears on the display and the  
control indicator o in the fuel gauge  
illuminates 3 106.  
Instantaneous Fuel Consumption  
Display of the instantaneous  
consumption.  
Display of average speed. The  
measurement can be reset at any  
time.  
Blank page  
No trip/fuel information is displayed.  
AdBlue  
Average fuel consumption  
Press CHECK repeatedly until the  
AdBlue menu is shown.  
Display of average consumption. The  
measurement can be reset at any  
time and starts with a default value.  
Distance travelled  
Displays the current distance for trip  
2 since a certain reset.  
The values of trip 2 page can be reset  
by pressing SET/CLR for a few  
seconds.  
AdBlue range  
Indicates an estimate of the AdBlue  
level. A message indicates whether  
the level is sufficient or low.  
Trip 1 page:  
Average speed  
Display of average speed. The  
measurement can be reset at any  
time.  
3 152.  
Average fuel consumption  
Info Display  
Digital speed page  
Digital display of the instantaneous  
speed.  
Display of average consumption. The  
measurement can be reset at any  
time and starts with a default value.  
The Info Display is located in the  
instrument panel near the instrument  
cluster.  
Distance travelled  
Displays the current distance for trip  
1 since the reset.  
The values of trip 1 page can be reset  
by pressing SET/CLR for a few  
seconds.  
Depending on the vehicle  
Stop and Start time counter  
configuration the vehicle has a  
A time counter calculates the time  
spent in STOP mode during a  
journey. It resets to zero every time  
the ignition is switched on.  
Graphic Info Display  
or  
Colour Info Display with  
touchscreen functionality  
Compass page  
Displays the geographic direction of  
driving.  
The Info Displays can indicate:  
Trip 2 page:  
Average speed  
time 3 93  
outside temperature 3 92  
Instruments and controls  
111  
date 3 93  
Graphic Info Display  
Colour Info Display  
Infotainment system, see  
description in the Infotainment  
manual  
indication of rear view camera  
3 196  
indication of panoramic view  
system 3 193  
indication of parking assist  
instructions 3 183  
navigation, see description in the  
Infotainment manual  
vehicle and system messages  
3 114  
settings for vehicle  
personalisation 3 115  
Selecting menus and settings  
There are three options to operate the  
display:  
via buttons next to the display  
by touching the touchscreen with  
the finger  
via speech recognition  
Button and touch operation  
Press X to switch on the display.  
Press MENU to select main menu  
page.  
Press H{}I to select a menu  
page.  
Press OK to confirm a selection.  
Press ß to exit a menu without  
changing a setting.  
Press X to switch on the display.  
Press : to select system settings  
(units, language, time and date).  
Press Í to select vehicle settings or  
driving functions.  
112  
Instruments and controls  
Touch required menu display icon or  
a function with the finger.  
Confirm a required function or  
selection by touching.  
Touch r on the display to exit a  
menu without changing a setting.  
For further information, see  
Infotainment manual.  
Speech recognition  
Description see Infotainment manual.  
Vehicle personalisation 3 115.  
Head-up display shows:  
Switching on  
Press e to switch on the head-up  
display.  
vehicle speed  
speed limits detected by the  
speed sign recognition  
Head-up display  
The head-up display displays driver  
information concerning the  
Adjust position of head-up display  
image  
Press ä or å to centre the image. It  
can only be adjusted up and down,  
not side to side.  
set speed of speed limiter  
set speed of cruise control  
forward collision alert  
instrument cluster onto a foldable  
projection plane on the driver's side.  
The information appears as an image  
projected from a lense in the  
instrument panel onto the projection  
plane directly ahead in driver's view.  
The image appears focused out  
toward the front of the vehicle.  
navigation information.  
9 Warning  
If the head-up display image is too  
bright or too high in your field of  
view, it may obstruct your view  
Instruments and controls  
Rear view display  
113  
Units  
when it is dark outside. Be sure to  
keep the head-up display image  
dim and placed low in your field of  
view.  
The rear view display is located at the  
position of the interior mirror.  
Units can be changed in vehicle  
personalisation menu 3 115.  
It provides the following views:  
Care of head-up display  
standard rear view 3 39  
close rear view 3 196  
passenger side view 3 192  
Adjust brightness  
Clean the screen of the head-up  
display with a soft cloth sprayed with  
glass cleaner. Wipe the lens gently,  
then dry it.  
The head-up display image will  
automatically dim and brighten to  
compensate for outside lighting.  
Brightness can also be adjusted  
manually as needed:  
Switching on  
System limitations  
Press e to brighten the display. Press  
æ to dim the display.  
Head-up display may not operate  
properly when:  
The lens in the instrument panel  
is covered by objects or not  
clean.  
The image can temporarily illuminate  
depending on angel and position of  
sunlight.  
Display brightness is too dim or  
Switching off  
Press æ and hold to turn the head-up  
display off.  
bright.  
Image is not adjusted to the  
proper height.  
The driver wears polarized  
sunglasses.  
Language  
Preferred language can be set in  
vehicle personalisation menu 3 115.  
Press m and confirm the message  
with p.  
If the head-up image is not correct for  
other reasons, contact a workshop.  
114  
Instruments and controls  
Selecting a view  
Messages in the  
Colour Info Display  
Vehicle messages  
Messages are indicated in the Driver  
Information Centre, in some cases  
together with a warning chime.  
Some important messages may  
appear additionally in the  
Info Display. Some messages only  
pop-up for a few seconds.  
Warning chimes  
If several warnings appear at the  
same time, only one warning chime  
will sound.  
When starting the engine or whilst  
driving  
The warning chime regarding not  
fastened seat belts has priority over  
any other warning chime.  
Select the standard rear view or  
passenger side view by pressing the  
p on the bottom side.  
Close rear view is automatically  
activated when reverse gear is  
engaged.  
Press SET / CLR to confirm a  
message.  
If a seat belt is not fastened.  
If a door or the tailgate is not fully  
closed.  
Switching off  
Vehicle and service messages  
If a certain speed is exceeded  
with parking brake applied.  
If cruise control deactivates  
automatically.  
If a programmed speed or speed  
limit is exceeded.  
Press m.  
The vehicle messages are displayed  
as text. Follow the instructions given  
in the messages.  
Instruments and controls  
115  
If a warning message appears in  
the Driver Information Centre.  
If the electronic key is not in the  
passenger compartment.  
If the parking assist detects an  
object.  
If an unintended lane change  
occurs.  
Select Personalisation-configuration,  
Vehicle personalisation  
The vehicle's behaviour can be  
personalised by changing the settings  
in the Info Display.  
Depending on vehicle equipment and  
country-specific regulations some of  
the functions described below may  
not be available.  
I OK.  
Unit settings  
Select Display configuration, I OK.  
Select Choise of units, I OK.  
Select desired settings, I OK.  
Language settings  
Select Display configuration, I OK.  
Select Choise of language, I OK.  
Select desired language, I OK.  
If the exhaust filter has reached  
the maximum filling level.  
Some functions are only displayed or  
active when the engine is running.  
When the vehicle is parked and /  
or the driver's door is opened  
Graphic Info Display  
Vehicle settings  
With exterior lights on.  
Select Define vehicle parameters, I  
OK.  
During an Autostop  
In the corresponding submenus the  
following settings can be changed:  
If the driver's door is opened.  
If any condition for a restart of the  
engine is not fulfilled.  
Lamps  
Follow me home headlamps:  
Activates or deactivates the  
function and adjusts its duration.  
Welcome lighting: Activates or  
deactivates the function and  
adjusts its duration.  
Directional headlights: Activates  
or deactivates the function.  
Press MENU to open the menu page.  
Use four-way button to operate the  
display:  
116  
Instruments and controls  
Comfort  
Driving function  
Colour Info Display Multimedia  
Press Í.  
Ambient lighting: Adjusts the  
brightness of the ambient  
lighting.  
Rear wiper in reverse gear:  
Activates or deactivates  
automatic switching on of the  
rear window wiper when reverse  
gear is engaged.  
Select Driving function.  
In the corresponding submenus the  
following settings can be changed:  
Park Assist: Activates advanced  
park assist, a parking maneuver  
can be selected.  
Parking sensors: Activates or  
Vehicle  
deactivates the parking sensors.  
Unlocking boot only: Activation /  
deactivation.  
Blind spot sensors: Activates or  
deactivates side blind spot alert.  
Under-inflation initialization:  
Initialises the tyre under-inflation  
detection system.  
Plip action: Driver / all doors.  
Security  
Fatigue Detection system:  
Activates or deactivates the  
driver drowsiness system.  
Press : to open settings menu.  
Use touch buttons to operate the  
display.  
Diagnostic: Shows alert  
messages of the diagnostic  
system.  
Unit settings  
Select System configuration.  
Driving assistance  
Speed recommendation:  
Activates or deactivates the  
function.  
Change units for Distance and fuel  
consumption and Temperature.  
Language settings  
Select Language.  
Change language by touching the  
respective entry.  
Instruments and controls  
117  
Vehicle settings  
Headlights  
Driver's attention warning:  
Activates or deactivates the  
driver drowsiness system.  
Guide-me-home lighting:  
Activates or deactivates the  
function and adjusts its duration.  
Colour Info Display  
Multimedia Navi Pro  
Welcome lighting: Activates or  
deactivates the function and  
adjusts its duration.  
Directional headlamps: Activates  
or deactivates the cornering  
lights.  
Comfort  
Mood lighting: Adjusts the  
brightness of the ambient  
lighting.  
Press Í.  
Select Vehicle settings.  
In the corresponding submenus the  
following settings can be changed:  
Safety  
Speed reading/recommendation:  
Activates or deactivates the  
speed limit information by traffic  
sign recognition.  
Active safety brake: Activates or  
deactivates active emergency  
braking, the alert distance for risk  
of collision can be selected.  
Mirror adaptation in reverse:  
Adjusts the exterior mirrors if  
reverse gear is engaged to  
facilitate sidewalks visibility.  
Press : to open settings menu.  
Parking  
Prevention of door mirror folding:  
Activates or deactivates the  
automatic folding of the exterior  
mirrors.  
Rear wiper in reverse: Activates  
or deactivates automatic  
switching on of the rear window  
wiper when reverse gear is  
engaged.  
Use touch buttons to operate the  
display.  
Unit settings  
Select System settings.  
Change units for Distance and fuel  
consumption and Temperature.  
Confirm with G.  
118  
Instruments and controls  
Language settings  
Select Languages.  
Change language by touching the  
respective entry.  
Vehicle settings  
Headlights  
Guide-me-home lighting:  
Activates or deactivates the  
function and adjusts its duration.  
Welcome lighting: Activates or  
deactivates the function and  
adjusts its duration.  
Directional headlamps: Activates  
or deactivates the cornering  
lights.  
Confirm with G.  
Driving functions  
Press Í.  
Select Driving functions.  
In the corresponding submenus the  
following settings can be changed:  
Comfort  
Mood lighting: Adjusts the  
brightness of the ambient  
lighting.  
Park Assist: Activates advanced  
park assist, a parking maneuver  
can be selected.  
Press Í.  
Select Vehicle settings.  
In the corresponding submenus the  
following settings can be changed:  
Safety  
Parking sensors: Activates or  
deactivates the parking sensors.  
Traffic Signs Recognition:  
Activates or deactivates the  
speed limit information by traffic  
sign recognition.  
Active safety brake: Activates or  
deactivates active emergency  
braking, the alert distance for risk  
of collision can be selected.  
Mirror adaptation in reverse:  
Adjusts the exterior mirrors if  
reverse gear is engaged to  
facilitate sidewalks visibility.  
Blind spot sensors: Activates or  
deactivates side blind spot alert.  
Under-inflation initialization:  
Initialises the tyre under-inflation  
detection system.  
Parking  
Rear wiper in reverse: Activates  
or deactivates automatic  
switching on of the rear window  
wiper when reverse gear is  
engaged.  
Blocking of door mirror folding:  
Activates or deactivates the  
automatic folding of the exterior  
mirrors.  
Diagnostic: Shows alert  
messages of the diagnostic  
system.  
Instruments and controls  
119  
Driver's attention warning:  
Activates or deactivates the  
driver drowsiness system.  
Notice  
Telematics services  
Establishing an emergency call may  
not be possible in areas without  
sufficient network availability or due  
to hardware damage during an  
accident.  
Vauxhall Connect  
Vauxhall Connect is a new way to  
stay connected and secure on the  
road.  
Automatic crash notification  
In case of an accident with airbag  
deployment, an automatic  
emergency call is established and an  
automatic crash notification will be  
transmitted to the next public safety  
answering point.  
Features available with  
Vauxhall Connect are:  
emergency call function  
breakdown call function  
When the vehicle is equipped with  
Vauxhall Connect, these features are  
automatically activated. Terms and  
Conditions apply.  
Vauxhall Connect is operated by the  
buttons in the overhead console.  
Emergency assistance  
In case of an emergency you can also  
manually place an emergency call by  
pressing the red SOS button for more  
than two seconds. The LED flashes to  
confirm that a connection to the  
nearest PSAP is being established.  
The LED illuminates steadily as long  
as the call is active.  
Emergency call function  
Vehicles featuring the emergency call  
function are equipped with a red  
SOS button in the overhead console.  
The emergency call function will  
establish a connection to the nearest  
public safety answering point (PSAP).  
A minimum set of data including  
vehicle and location information will  
be sent to the PSAP.  
Pressing the SOS button immediately  
a second time will terminate the call.  
The LED switches off.  
120  
Instruments and controls  
Status LED  
Illuminates green and red and  
extinguishes after a short time, when  
the ignition is switched on: the system  
works properly.  
Illuminates red: fault in the system.  
Contact a workshop.  
Flashes red: backup battery needs  
replacement.  
Breakdown call function  
Pressing . for more than two  
seconds connects you to a roadside  
assistance service provider.  
For information about coverage and  
scope of services of the roadside  
assistance, please refer to the  
Service and warranty booklet.