Keys, doors and windows
Fault
31
Longer pull: window closes
automatically upto end position. To
stop movement, operate switch once
more.
If the windows cannot be opened or
closed automatically, activate the
window electronics as follows:
Safety function
1. Close the doors.
2. Switch on ignition.
If the window glass encounters
resistance above the middle of the
window during automatic closing, it is
immediately stopped and opened
again.
3. Close the window completely and
operate the button for an
additional five seconds.
4. Open the window completely and
operate the button for
Override safety function
Operate the switch in the door trim for
the respective window by pushing to
open or pulling to close.
one second further.
In the event of closing difficulties due
to frost or the like, switch on the
ignition, then pull the switch several
times to close the windows in stages.
5. Repeat this procedure for each
window.
Open
Short push: window opens in stages.
Overload
Long push: window opens
automatically upto end position. To
stop movement, operate switch once
more.
If the windows are repeatedly
operated at short intervals, the
window operation is disabled for
some time.
Close
Short pull: window closes in stages.
English 
